HP-VLAN

All MIBs › HP-VLAN

Organization: HP Networking

Last Updated: 2000-11-03

Category: Technology: Switching/L2, Technology: VLAN, VLAN and Bridging, Vendor: HP/HPE

Description: HP SNMP MIB for VLAN configuration and membership management on HP ProCurve and networking products.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HP-VLAN?

HP-VLAN is an HP SNMP MIB for configuring and managing VLAN (virtual LAN) membership and settings on HP ProCurve and related HP networking products. It models virtual LAN objects to define VLAN identifiers, names, and port-to-VLAN membership assignments, providing the configuration backbone for Layer 2 network segmentation on the device. Its role in device status monitoring is primarily as a configuration-state check, letting an administrator confirm that VLAN definitions and port memberships match the intended network design, which is a software/configuration integrity check rather than a hardware sensor reading. It parallels the standard Q-BRIDGE-MIB (dot1qVlan objects) in concept, and HP devices supporting 802.1Q VLANs typically implement both the standard and this HP-specific module together. It is typically deployed across HP ProCurve switches in enterprise LANs wherever VLAN-based network segmentation is used. Engineers can download the HP-VLAN file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HP-VLAN. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP ProCurve switch

Monitoring Examples

No sample objects were provided in the source excerpt, so exact table names are unavailable, but by its stated purpose the module would model VLAN identifiers and per-port VLAN membership tables analogous to the standard dot1qVlanStaticTable. An administrator would poll such a table to confirm a given port remains a member of its assigned VLAN(s) after a configuration change or reboot, and an unexpected membership change would indicate a misconfiguration or unauthorized change affecting network segmentation. Because HP switches typically also support the standard Q-BRIDGE-MIB, cross-checking both would give a complete VLAN state picture.

What Can Be Monitored

VLAN identifier and name configuration
port-to-VLAN membership
VLAN configuration integrity

Imported Objects

From HP-ICF-OID

hpSwitch

OBJECT-IDENTITY

From HP-ICF-TC

ConfigStatus

From IF-MIB

InterfaceIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
PhysAddress
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpVLAN	1.3.6.1.4.1.11.2.14.11.5.1.3
hpVlanLevelOne	1.3.6.1.4.1.11.2.14.11.5.1.3.1			This MIB module describes management objects used to model virtual LANs (VLANs).
hpVlanObjects	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1
I32 hpVlanNumber	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.1	Integer32	read-only	The number of currently defined VLANs in the device. Though VLANs should be created using contiguous VLAN IDs, this is not mandatory. Gaps in the VLAN ID sequence may also result from the deletion of existing VLANs. Therefore, this value represents the total number of VLANs in the device and should not be used to indicate the highest VLAN ID value currently in use.
hpVlanIdentTable	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4		not-accessible	A table describing the various VLANs that are currently defined for this device.
hpVlanIdentEntry	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1		not-accessible	The row in the hpVlanIdentTable containing the general VLAN information.
VLA hpVlanIdentIndex	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1.1	VlanID	not-accessible	The VLAN ID which uniquely identifies a row in this table.
STR hpVlanIdentName	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1.2	DisplayString	read-create	The user defined textual name that is associated with this VLAN.
INT hpVlanIdentMode	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1.3	INTEGER	read-only	The mode of this VLAN. A VLAN can be either port-based or MAC address-based. A port-based VLAN supports a multiple addresses per VLAN port. A MAC address-based VLAN supports multiple MAC addresses per port such that VLAN address tables must be consulted to determine the number of VLAN clients.
ROW hpVlanIdentStatus	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1.4	RowStatus	read-create	The status of a VLAN information entry.
I32 hpVlanDot1QID	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1.5	Integer32	read-create	The VLAN tag ID. 802.1Q
INT hpVlanIdentState	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1.6	INTEGER	read-only	Current state of the VLAN. If one port in the VLAN is up, then that VLAN is up, otherwise it is down.
INT hpVlanIdentType	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1.7	INTEGER	read-create	Type of VLAN: static - VLAN is user-configured; configuration information is retained in configuration file and thus such VLANs are available across reboots. dynamic - VLAN is managed by GVRP; configuration information is NOT retained in configuration file and thus such VLANs are not available across reboots. They may be relearnt after a reboot via GVRP activity
hpVlanMemberTable	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.5		not-accessible	A table describing the members of the various VLANs that are currently defined for this device. Interfaces can be associated with a pre-defined VLAN (i.e., VLANs can be created by grouping existing interfaces) by adding rows to this table. Likewise, deleting rows from this table removes the specified interface from the VLAN. Note that certain entries in this table will automatically be created when a VLAN is created, such as the entry associating a VLAN with its propVirtual interface to the management and/or forwarding entity on the device. These entries are read-only and can not be manipulated via the MIB.
hpVlanMemberEntry	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.5.1		not-accessible	The row in the hpVlanMemberTable containing the VLAN ID to Interface Group ifIndex mappings.
NUM hpVlanMemberIfIndex	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.5.1.1	InterfaceIndex	not-accessible	The ifIndex value which uniquely identifies a row in the Interfaces Table. The corresponding row in the Interfaces Table must exist prior to the index being used in this table.
VLA hpVlanMemberIndex	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.5.1.2	VlanID	read-create	The VLAN ID identifies the VLAN the interface is in. The corresponding row in the VLAN Ident Table must exist prior to the index being used in this table.
hpVlanAddrTable	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.6		not-accessible	A table describing the MAC addresses that are currently associated with a specific VLAN. Entries are added to and deleted from this read-only table automatically as they are learned from the network.
hpVlanAddrEntry	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.6.1		not-accessible	The row in the hpVlanAddrTable containing the VLAN ID to MAC address mappings.
VLA hpVlanAddrIndex	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.6.1.1	VlanID	not-accessible	The VLAN ID which uniquely identifies a row in the VLAN Ident Table. The corresponding row in the VLAN Ident Table must exist prior to the index being present in this table.
PHY hpVlanAddrPhysAddress	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.6.1.2	PhysAddress	read-only	The MAC address of a node that is associated with a specific VLAN as identified by the object hpVlanAddrIndex.
CON hpVlanIdentConfigStatus	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.7	ConfigStatus	read-only	The status of a VLAN information table. If one or more variables in this group were reconfigurated since last reboot and required reboot to take effect, the value of this variable will be set to notInService.
hpVlanMemberTable2	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.8		not-accessible	A table describing the VLANs on each particular port along with tagging information.
hpVlanMemberEntry2	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.8.1		not-accessible	The row in the hpVlanMemberTable2 containing the VLAN ID to interface group ifIndex mappings as well the VLAN tagging information.
INT hpVlanMemberTagged2	1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.8.1.1	INTEGER	read-write	Identifies whether the particular VLan on this port is tagged or not. 'no' denotes not a member of that vlan. 'auto' denotes that GVRP will dynamically determine the membership of this port.
hpVlanTraps	1.3.6.1.4.1.11.2.14.11.5.1.3.1.2
hpVlanConformance	1.3.6.1.4.1.11.2.14.11.5.1.3.1.3
hpVlanGroups	1.3.6.1.4.1.11.2.14.11.5.1.3.1.3.1
hpVlanGeneralGroup	1.3.6.1.4.1.11.2.14.11.5.1.3.1.3.1.1			A collection of objects that provide general information about a configured VLAN. The organization of this group is such that it is assumed that all devices supporting VLANs associate an RFC 1573 interface with a VLAN even if only to allow default node-to-VLAN assignment.
hpVlanAddressGroup	1.3.6.1.4.1.11.2.14.11.5.1.3.1.3.1.2			A collection of objects that contain VLAN to MAC address mapping data.
hpVlanMemberGroup	1.3.6.1.4.1.11.2.14.11.5.1.3.1.3.1.3			A collection of objects for providing port to VLAN mapping data.
hpVlanTaggingGroup	1.3.6.1.4.1.11.2.14.11.5.1.3.1.3.1.4			A collection of objects for managing tagged VLANs.
hpVlanCompliances	1.3.6.1.4.1.11.2.14.11.5.1.3.1.3.2
hpVlanCompliance	1.3.6.1.4.1.11.2.14.11.5.1.3.1.3.2.1			The compliance statement for HP devices supporting the HP VLAN MIB.
hpVlanCompliance1	1.3.6.1.4.1.11.2.14.11.5.1.3.1.3.2.2			The compliance statement for HP devices supporting the HP VLAN MIB.

RFC description

Configures virtual LANs (VLANs) on HP network switches including VLAN identification, membership, and tagging (deprecated).

Start monitoring HP ProCurve switch (VLAN configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HP-VLAN

What Is HP-VLAN?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description