HH3C-TRAP-MIB

All MIBs › HH3C-TRAP-MIB

Organization: Hangzhou H3C Technologies Co., Ltd.

Last Updated: 2010-06-05

Category: Alarm and Event Management, Device Management, Domain: Fault Management, SNMP Framework, Vendor: H3C/HH3C

Description: HH3C MIB defining trap/notification objects for system event reporting from H3C network devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-TRAP-MIB?

HH3C-TRAP-MIB is a private H3C enterprise MIB whose purpose, per its module description, is to define generic trap/notification infrastructure applicable broadly across H3C routers, switches, and other product lines, with the note that individual objects may only apply to specific products. Rather than exposing polled configuration or status tables, it primarily supplies the notification framework other H3C feature MIBs use to send fault, state-change, or security event traps. Its monitoring role is therefore event-driven: it underpins alerting for hardware and software conditions defined elsewhere (e.g. interface, environment, or security-feature MIBs) rather than providing its own gettable status objects. Because it explicitly spans multiple product types, it depends heavily on product-specific documentation to interpret which traps are relevant to a given device model. It is used across the H3C portfolio wherever SNMP trap-based event notification is enabled. Engineers can download the HH3C-TRAP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-TRAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C routers
H3C switches
other H3C network products

Monitoring Examples

The provided source excerpt lists no concrete object or table names for this MIB, so no specific polling scenario can be described from it; in practice this module supplies shared trap-definition scaffolding that other H3C feature MIBs reference when raising device or feature-specific notifications, and a monitoring station would consume it by listening for traps rather than issuing GET requests.

What Can Be Monitored

device-generated event traps
product-specific fault notifications
system state-change notifications

Imported Objects

From HH3C-OID-MIB

hh3cCommon

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex
ifDescr	OBJECT-TYPE
ifIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TAddress
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cTrap	1.3.6.1.4.1.25506.2.38			This MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detail information.
hh3cTableGroup	1.3.6.1.4.1.25506.2.38.1
hh3cMacTabStatGroup	1.3.6.1.4.1.25506.2.38.1.1
INT hh3cMacTabTrapEnable	1.3.6.1.4.1.25506.2.38.1.1.1	INTEGER	read-write	Indicates whether hh3cMacTabFullTrap and hh3cMacTabAlmostFullTrap traps should be generated when the MAC table is filled.
I32 hh3cMacTabTrapInterval	1.3.6.1.4.1.25506.2.38.1.1.2	Integer32	read-write	Definition of the minimum interval between two traps which occur when the MAC table is full or two traps which occur when the MAC table is almost full.
hh3cMacTabTrapInfo	1.3.6.1.4.1.25506.2.38.1.1.3
I32 hh3cMacTabLen	1.3.6.1.4.1.25506.2.38.1.1.3.1	Integer32	accessible-for-notify	The length of the MAC table.
hh3cMacTabTrap	1.3.6.1.4.1.25506.2.38.1.1.4
NTF hh3cMacTabFullTrap	1.3.6.1.4.1.25506.2.38.1.1.4.1			Send this trap when the MAC table is filled. The interval between two traps generated should be longer than hh3cMacTabTrapInterval.
NTF hh3cMacTabAlmostFullTrap	1.3.6.1.4.1.25506.2.38.1.1.4.2			Send this trap when the MAC table is almost full. The interval between two traps generated should be longer than hh3cMacTabTrapInterval.
hh3cArpTabStatGroup	1.3.6.1.4.1.25506.2.38.1.2
INT hh3cArpTabTrapEnable	1.3.6.1.4.1.25506.2.38.1.2.1	INTEGER	read-write	Indicates whether hh3cArpTabFullTrap traps should be generated when the ARP table is filled.
I32 hh3cArpTabTrapInterval	1.3.6.1.4.1.25506.2.38.1.2.2	Integer32	read-write	Definition of the minimum interval between two traps which occur when the ARP table is filled.
hh3cArpTabTrapInfo	1.3.6.1.4.1.25506.2.38.1.2.3
I32 hh3cArpTabLen	1.3.6.1.4.1.25506.2.38.1.2.3.1	Integer32	accessible-for-notify	The length of the ARP table.
hh3cArpTabTrap	1.3.6.1.4.1.25506.2.38.1.2.4
NTF hh3cArpTabFullTrap	1.3.6.1.4.1.25506.2.38.1.2.4.1			Send this trap when the ARP table is filled. The interval between two traps generated should be longer than hh3cArpTabTrapInterval.
NTF hh3cArpPortDynamicEntryFullTrap	1.3.6.1.4.1.25506.2.38.1.2.4.2			Send this trap when the dynamic ARP number of the port exceeds the limitation. The object hh3cArpTabLen describes the limitation of the max dynamic ARP number of this port. The interval between two traps should be longer than hh3cArpTabTrapInterval.
hh3cRtTabStatGroup	1.3.6.1.4.1.25506.2.38.1.3
hh3cDetailRtTrapTable	1.3.6.1.4.1.25506.2.38.1.3.1		not-accessible	This table contains objects to decide what kind of trap should be sent.
hh3cDetailRtTrapEntry	1.3.6.1.4.1.25506.2.38.1.3.1.1		not-accessible	Entry items
INT hh3cDetailRtProType	1.3.6.1.4.1.25506.2.38.1.3.1.1.1	INTEGER	accessible-for-notify	The index value which uniquely identifies an entry in the hh3cDetailRtTrapTable.
INT hh3cDetailRtEnable	1.3.6.1.4.1.25506.2.38.1.3.1.1.2	INTEGER	read-write	Indicates whether hh3cDetailRtTabFullTrap traps should be generated when a specific routing table is filled.
INT hh3cRtTabTrapEnable	1.3.6.1.4.1.25506.2.38.1.3.2	INTEGER	read-write	Indicates whether hh3cRtTabFullTrap traps should be generated when the routing table is filled.
I32 hh3cRtTabTrapInterval	1.3.6.1.4.1.25506.2.38.1.3.3	Integer32	read-write	Definition of the minimum interval between two traps which occur when the routing table is filled.
hh3cRtTabTrapInfo	1.3.6.1.4.1.25506.2.38.1.3.4
I32 hh3cRtTabLen	1.3.6.1.4.1.25506.2.38.1.3.4.1	Integer32	accessible-for-notify	The length of the routing table. The detail routing tables also use the same object.
IPt hh3cDefaultRtNextHopType	1.3.6.1.4.1.25506.2.38.1.3.4.2	InetAddressType	accessible-for-notify	The IP address type of the next hop of the default route. The value must be ipv4 or ipv6
IP hh3cDefaultRtNextHop	1.3.6.1.4.1.25506.2.38.1.3.4.3	InetAddress	accessible-for-notify	The IP address of the next hop of the default route.
NUM hh3cDefaultRtOutIf	1.3.6.1.4.1.25506.2.38.1.3.4.4	InterfaceIndex	accessible-for-notify	The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
hh3cRtTabTrap	1.3.6.1.4.1.25506.2.38.1.3.5
NTF hh3cRtTabFullTrap	1.3.6.1.4.1.25506.2.38.1.3.5.1			Send this trap when the routing table is filled. The interval between two traps generated should be longer than hh3cRtTabTrapInterval.
NTF hh3cDetailRtTabFullTrap	1.3.6.1.4.1.25506.2.38.1.3.5.2			Send this trap when the detail routing table is filled. The interval between two traps generated should be longer than hh3cRtTabTrapInterval.
NTF hh3cDefaultRtDelTrap	1.3.6.1.4.1.25506.2.38.1.3.5.3			Send this trap when the default route is deleted.
T/F hh3cDefaultRtDelTrapEnable	1.3.6.1.4.1.25506.2.38.1.3.6	TruthValue	read-write	Indicates whether hh3cDefaultRtDelTrap traps should be generated when the default route is deleted.
hh3cMulticastTabStatGroup	1.3.6.1.4.1.25506.2.38.1.4
INT hh3cMulticastTabTrapEnable	1.3.6.1.4.1.25506.2.38.1.4.1	INTEGER	read-write	Indicates whether hh3cMulticastTabFullTrap traps should be generated when the multicast table is filled.
I32 hh3cMulticastTabTrapInterval	1.3.6.1.4.1.25506.2.38.1.4.2	Integer32	read-write	Definition of the minimum interval between two traps which occur when the multicast table is filled.
hh3cMulticastTabTrapInfo	1.3.6.1.4.1.25506.2.38.1.4.3
INT hh3cMulticastTabType	1.3.6.1.4.1.25506.2.38.1.4.3.1	INTEGER	accessible-for-notify	Defining the type of the multicast table, layer2 or layer3.
I32 hh3cMulticastTabLen	1.3.6.1.4.1.25506.2.38.1.4.3.2	Integer32	accessible-for-notify	The length of the multicast table.
hh3cMulticastTabTrap	1.3.6.1.4.1.25506.2.38.1.4.4
NTF hh3cMulticastTabFullTrap	1.3.6.1.4.1.25506.2.38.1.4.4.1			Send this trap when the multicast table is filled. The interval between two traps generated should be longer than hh3cMulticastTabTrapInterval.
hh3cNdTabStatGroup	1.3.6.1.4.1.25506.2.38.1.5
INT hh3cNdTabTrapEnable	1.3.6.1.4.1.25506.2.38.1.5.1	INTEGER	read-write	Indicates whether hh3cNdTabFullTrap traps should be generated when the ND table is filled.
I32 hh3cNdTabTrapInterval	1.3.6.1.4.1.25506.2.38.1.5.2	Integer32	read-write	Definition of the minimum interval between two traps which occur when the ND table is filled.
hh3cNdTabTrapInfo	1.3.6.1.4.1.25506.2.38.1.5.3
I32 hh3cNdTabLen	1.3.6.1.4.1.25506.2.38.1.5.3.1	Integer32	accessible-for-notify	The length of the ND table.
hh3cNdTabTrap	1.3.6.1.4.1.25506.2.38.1.5.4
NTF hh3cNdTabFullTrap	1.3.6.1.4.1.25506.2.38.1.5.4.1			Send this trap when the ND table is filled. The interval between two traps generated should be longer than hh3cNdTabTrapInterval.
hh3cPeriodicalTrapGroup	1.3.6.1.4.1.25506.2.38.1.6
hh3cPeriodicalTrapObjects	1.3.6.1.4.1.25506.2.38.1.6.1
I32 hh3cPeriodicalTrapInterval	1.3.6.1.4.1.25506.2.38.1.6.1.1	Integer32	read-write	Definition of the periodical interval. If no trap occurs during the certain interval, an hh3cPeriodicalTrap will be generated. If the interval is set to 0, no hh3cPeriodicalTrap will be generated.
INT hh3cPeriodicalTrapSwitch	1.3.6.1.4.1.25506.2.38.1.6.1.2	INTEGER	read-write	Definition of the periodical switch. If the value is off,the hh3cPeriodicalTrap will not be generated. the hh3cPeriodicalTrapInterval will be set to 0.
hh3cPeriodicalTrapInfo	1.3.6.1.4.1.25506.2.38.1.6.2
hh3cPeriodicalNotification	1.3.6.1.4.1.25506.2.38.1.6.3
hh3cPeriodicalNotificationPrefix	1.3.6.1.4.1.25506.2.38.1.6.3.0
NTF hh3cPeriodicalTrap	1.3.6.1.4.1.25506.2.38.1.6.3.0.1			If no trap occurs during the interval spicified by hh3cPeriodicalTrapInterval, an hh3cPeriodicalTrap will be generated. If the interval is set to 0, no hh3cPeriodicalTrap will be generated.
hh3cTrapDesInfo	1.3.6.1.4.1.25506.2.38.1.7
hh3cTrapDesInfoTable	1.3.6.1.4.1.25506.2.38.1.7.1		not-accessible	A table of trap destination host address and port .
hh3cTrapDesInfoEntry	1.3.6.1.4.1.25506.2.38.1.7.1.1		not-accessible	The entry of trap destination host address and port.
I32 hh3cTrapDesInfoIndex	1.3.6.1.4.1.25506.2.38.1.7.1.1.1	Integer32	not-accessible	The index of this table.
IP hh3cTrapDesIPAddress	1.3.6.1.4.1.25506.2.38.1.7.1.1.2	IpAddress	read-create	The host IP address of the trap destination.
I32 hh3cTrapDesPort	1.3.6.1.4.1.25506.2.38.1.7.1.1.3	Integer32	read-create	The port of the trap destination.
ROW hh3cTrapDesRowStatus	1.3.6.1.4.1.25506.2.38.1.7.1.1.4	RowStatus	read-create	The status of this table entry.
ADR hh3cTrapDesAddrTAddress	1.3.6.1.4.1.25506.2.38.1.7.1.1.5	TAddress	read-create	This object contains a transport address.
hh3cTrapConfig	1.3.6.1.4.1.25506.2.38.1.8
hh3cTrapConfigTable	1.3.6.1.4.1.25506.2.38.1.8.1		not-accessible	A table of trap configuration.
hh3cTrapConfigEntry	1.3.6.1.4.1.25506.2.38.1.8.1.1		not-accessible	The entry of trap configuration.
I32 hh3cTrapConfigIndex	1.3.6.1.4.1.25506.2.38.1.8.1.1.1	Integer32	not-accessible	The index of this table.
STR hh3cTrapConfigName	1.3.6.1.4.1.25506.2.38.1.8.1.1.2	SnmpAdminString	read-only	The name of the appointed traps.
STR hh3cTrapConfigDescr	1.3.6.1.4.1.25506.2.38.1.8.1.1.3	SnmpAdminString	read-write	The description of the appointed traps.
INT hh3cTrapConfigSwitch	1.3.6.1.4.1.25506.2.38.1.8.1.1.4	INTEGER	read-write	Indicates whether the appointed traps should be generated.

RFC description

H3C (Huawei) trap/notification MIB. Defines SNMP trap events and alert conditions for H3C network devices.

Start monitoring H3C routers, switches, and other network products (generic trap framework) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-TRAP-MIB

What Is HH3C-TRAP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description