HH3C-FR-QOS-MIB

All MIBs › HH3C-FR-QOS-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2004-07-12

Category: Domain: WAN, Frame Relay, Quality of Service, Vendor: H3C/HH3C

Description: Manages QoS policies applied to Frame Relay permanent virtual circuits on H3C WAN interface modules.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-FR-QOS-MIB?

HH3C-FR-QOS-MIB is a private H3C (Hewlett-Packard/Huawei joint venture, now HPE Networking/H3C) enterprise MIB for managing and monitoring Class-Based Frame Relay QoS features applied to permanent virtual circuits (PVCs) on H3C WAN interface modules. Per its module description it centers on configuration of FR class maps (hh3cFrClassCfgInfoTable), committed information rate (CIR) settings (hh3cCirCfgInfoTable), and the application of FR QoS classes to specific interfaces (hh3cIfApplyFrClas...). Its monitoring value is chiefly about traffic-shaping/QoS configuration and performance state on Frame Relay circuits rather than general hardware health: it lets an operator verify which QoS class and CIR are applied to a given PVC and audit whether traffic classes are configured as intended. It builds on standard Frame Relay DLCI/PVC concepts and complements the vendor's broader QoS MIB family. It is deployed on H3C routers and WAN switches carrying legacy Frame Relay circuits requiring class-based traffic shaping. Engineers can download the HH3C-FR-QOS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-FR-QOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C routers and WAN switches with Frame Relay interfaces

Monitoring Examples

No specific sample objects were supplied beyond table name fragments in the module description, but based on those, an admin would query hh3cFrClassCfgInfoTable to see configured FR QoS class definitions and hh3cCirCfgInfoTable to check the committed information rate assigned to each class. hh3cIfApplyFrClas(sTable) would show which class is applied to which Frame Relay interface/DLCI, letting an operator confirm a PVC experiencing congestion actually has the intended QoS class and CIR applied rather than a default/no-QoS profile.

What Can Be Monitored

configured FR QoS class definitions
committed information rate (CIR) per class
QoS class applied per Frame Relay interface/PVC

Imported Objects

From HH3C-OID-MIB

hh3cQoS

OBJECT-IDENTITY

From RFC1213-MIB

ifIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cFrQoSMib	1.3.6.1.4.1.25506.8.32.3			This MIB contains objects to Manage configuration and Monitor running state for Class Based FR QoS feature. ******************************* MIB Tables ******************************** This MIB consists of the following tables: 1 : hh3cFrClassCfgInfoTable 2 : hh3cCirCfgInfoTable 3 : hh3cIfApplyFrClassTable 4 : hh3cPvcApplyFrClassTable 5 : hh3cFrPvcBandwidthTable 5 : hh3cRTPFrClassApplyTable 6 : hh3cRTPFrPvcQueueRunInfoTable
hh3cFrQoSObjects	1.3.6.1.4.1.25506.8.32.3.1
hh3cFrClassObjects	1.3.6.1.4.1.25506.8.32.3.1.1
I32 hh3cFrClassIndexNext	1.3.6.1.4.1.25506.8.32.3.1.1.1	Integer32	read-only	This object contains an appropriate value to be used for hh3cFrClassIndex when creating rows in the hh3cFrClassCfgInfoTable. Begin with 0.
hh3cFrClassCfgInfoTable	1.3.6.1.4.1.25506.8.32.3.1.1.2		not-accessible	A table of Fr Class configuration information.
hh3cFrClassCfgInfoEntry	1.3.6.1.4.1.25506.8.32.3.1.1.2.1		not-accessible	Fr Class Configuration Information Entry.
I32 hh3cFrClassIndex	1.3.6.1.4.1.25506.8.32.3.1.1.2.1.1	Integer32	not-accessible	Index of Fr Class. Begin with 0.
OCT hh3cFrClassName	1.3.6.1.4.1.25506.8.32.3.1.1.2.1.2	OCTET STRING	read-create	Name of Fr Class.
ROW hh3cFrClassRowStatus	1.3.6.1.4.1.25506.8.32.3.1.1.2.1.3	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy
hh3cCirAllowCfgInfoTable	1.3.6.1.4.1.25506.8.32.3.1.1.3		not-accessible	A table of DCE allowed rate Configuration information.
hh3cCirAllowCfgInfoEntry	1.3.6.1.4.1.25506.8.32.3.1.1.3.1		not-accessible	DCE allowed ratee Configuration Information Entry.
I32 hh3cCirAllowFrClassIndex	1.3.6.1.4.1.25506.8.32.3.1.1.3.1.1	Integer32	not-accessible	Index of Fr Class. Begin with 0.Equal to hh3cFrClassIndex
HH3 hh3cCirAllowDirection	1.3.6.1.4.1.25506.8.32.3.1.1.3.1.2	Hh3cCirAllowDirection	not-accessible	Packet Direction. inbound (1) outbound (2) inbound and outbound (3)
I32 hh3cCirAllowValue	1.3.6.1.4.1.25506.8.32.3.1.1.3.1.3	Integer32	read-create	DCE allowed rate (value greater than CIR) Unit : Bits per second. Value : .
ROW hh3cCirAllowRowStatus	1.3.6.1.4.1.25506.8.32.3.1.1.3.1.4	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy
hh3cCirCfgInfoTable	1.3.6.1.4.1.25506.8.32.3.1.1.4		not-accessible	A table of Committed Information Rate Configuration information.
hh3cCirCfgInfoEntry	1.3.6.1.4.1.25506.8.32.3.1.1.4.1		not-accessible	Committed Information Rate Configuration Information Entry.
I32 hh3cCirFrClassIndex	1.3.6.1.4.1.25506.8.32.3.1.1.4.1.1	Integer32	not-accessible	Index of Fr Class. Begin with 0.Equal to hh3cFrClassIndex
I32 hh3cCirValue	1.3.6.1.4.1.25506.8.32.3.1.1.4.1.2	Integer32	read-create	CIR in packet output direction ,bps. Value : .
ROW hh3cCirRowStatus	1.3.6.1.4.1.25506.8.32.3.1.1.4.1.3	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy
hh3cIfApplyFrClassTable	1.3.6.1.4.1.25506.8.32.3.1.1.5		not-accessible	A table of QoS Fr Class instance.
hh3cIfApplyFrClassEntry	1.3.6.1.4.1.25506.8.32.3.1.1.5.1		not-accessible	FrClass applied on interface Configuration Information Entry.
I32 hh3cIfApplyFrClassIfIndex	1.3.6.1.4.1.25506.8.32.3.1.1.5.1.1	Integer32	not-accessible	Interface Index, equal to ifIndex.
I32 hh3cIfApplyFrClassIndex	1.3.6.1.4.1.25506.8.32.3.1.1.5.1.2	Integer32	read-create	Index of Fr Class, equal to hh3cFrClassIndex
ROW hh3cIfApplyFrClassRowStatus	1.3.6.1.4.1.25506.8.32.3.1.1.5.1.3	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy
hh3cPvcApplyFrClassTable	1.3.6.1.4.1.25506.8.32.3.1.1.6		not-accessible	A table of QoS Fr Class instance.
hh3cPvcApplyFrClassEntry	1.3.6.1.4.1.25506.8.32.3.1.1.6.1		not-accessible	Fr Class applied on FR Pvc Configuration Information Entry.
I32 hh3cPvcApplyFrClassIfIndex	1.3.6.1.4.1.25506.8.32.3.1.1.6.1.1	Integer32	not-accessible	Fr Interface Index, equal to ifIndex.
I32 hh3cPvcApplyFrClassDlciNum	1.3.6.1.4.1.25506.8.32.3.1.1.6.1.2	Integer32	not-accessible	Fr DLCI number.
I32 hh3cPvcApplyFrClassIndex	1.3.6.1.4.1.25506.8.32.3.1.1.6.1.3	Integer32	read-create	Index of Fr Class, equal to hh3cFrClassIndex
ROW hh3cPvcApplyFrClassRowStatus	1.3.6.1.4.1.25506.8.32.3.1.1.6.1.4	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy
hh3cFrPvcBandwidthTable	1.3.6.1.4.1.25506.8.32.3.1.1.7		not-accessible	A table of Running statistics for bandwidth.
hh3cFrPvcBandwidthEntry	1.3.6.1.4.1.25506.8.32.3.1.1.7.1		not-accessible	Bandwidth Running statistics
I32 hh3cFrPvcBandwidthMaxReservedBW	1.3.6.1.4.1.25506.8.32.3.1.1.7.1.1	Integer32	read-only	Max reserved bandWidth. Unit : Kbps
I32 hh3cFrPvcBandwidthAvailable	1.3.6.1.4.1.25506.8.32.3.1.1.7.1.2	Integer32	read-only	Available bandWidth. Unit : Kbps
hh3cRTPQoSObjects	1.3.6.1.4.1.25506.8.32.3.1.2
hh3cRTPFrClassApplyTable	1.3.6.1.4.1.25506.8.32.3.1.2.1		not-accessible	A table of RTP(Realtime Transport Protocol) Queue instance.
hh3cRTPFrClassApplyEntry	1.3.6.1.4.1.25506.8.32.3.1.2.1.1		not-accessible	RTP(Realtime Transport Protocol) Queue Configuration Information Entry.
I32 hh3cRTPFrClassApplyFrClassIndex	1.3.6.1.4.1.25506.8.32.3.1.2.1.1.1	Integer32	not-accessible	Fr Class Index, equal to Hh3cFrClassIndex.
I32 hh3cRTPFrClassApplyStartPort	1.3.6.1.4.1.25506.8.32.3.1.2.1.1.2	Integer32	read-create	RTP-PORT(3): start-port: 2000~65535
I32 hh3cRTPFrClassApplyEndPort	1.3.6.1.4.1.25506.8.32.3.1.2.1.1.3	Integer32	read-create	RTP-PORT(3): end-port: 2000~65535
I32 hh3cRTPFrClassApplyBandWidth	1.3.6.1.4.1.25506.8.32.3.1.2.1.1.4	Integer32	read-create	Max bandWidth Value: Absolute value: 8~1000000. Unit: Kbps
I32 hh3cRTPFrClassApplyCbs	1.3.6.1.4.1.25506.8.32.3.1.2.1.1.5	Integer32	read-create	Committed Burst Size: 1500~2000000. Unit: byte
ROW hh3cRTPFrClassApplyRowStatus	1.3.6.1.4.1.25506.8.32.3.1.2.1.1.6	RowStatus	read-create	RowStatus for RTPFrClassApply Table. Three actions are used: active, createAndGo, destroy
hh3cRTPFrPvcQueueRunInfoTable	1.3.6.1.4.1.25506.8.32.3.1.2.2		not-accessible	A table of Running statistics for RTP(Realtime Transport Protocol) Queue applied on the FR PVC
hh3cRTPFrPvcQueueRunInfoEntry	1.3.6.1.4.1.25506.8.32.3.1.2.2.1		not-accessible	RTP(Realtime Transport Protocol) Queue statistics entry.
I32 hh3cRTPFrPvcQueueSize	1.3.6.1.4.1.25506.8.32.3.1.2.2.1.1	Integer32	read-only	the packet number of RTP(Realtime Transport Protocol) Queue now.
I32 hh3cRTPFrPvcQueueMaxSize	1.3.6.1.4.1.25506.8.32.3.1.2.2.1.2	Integer32	read-only	the Max packet number of RTP(Realtime Transport Protocol) Queue.
C32 hh3cRTPFrPvcQueueOutputs	1.3.6.1.4.1.25506.8.32.3.1.2.2.1.3	Counter32	read-only	the Output packet number of RTP(Realtime Transport Protocol) Queue.
C32 hh3cRTPFrPvcQueueDiscards	1.3.6.1.4.1.25506.8.32.3.1.2.2.1.4	Counter32	read-only	the Discarded packet number of RTP(Realtime Transport Protocol) Queue.

RFC description

Manages class-based QoS for Frame Relay on H3C routers including bandwidth allocation and priority.

Start monitoring H3C router/WAN switch with Frame Relay interfaces (Class-Based FR QoS) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-FR-QOS-MIB

What Is HH3C-FR-QOS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description