HPN-ICF-FR-QOS-MIB

All MIBs › HPN-ICF-FR-QOS-MIB

Last Updated: 2004-07-12

Category: Frame Relay, Technology: QoS, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages QoS policy application on Frame Relay interfaces and PVCs on HP/Comware WAN devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-FR-QOS-MIB?

HPN-ICF-FR-QOS-MIB is an HP/Comware ICF MIB that manages and monitors class-based Quality of Service (QoS) applied to Frame Relay interfaces and permanent virtual circuits (PVCs). Per its own internal documentation it consists of tables for Frame Relay class configuration (hpnicfFrClassCfgInfoTable), Committed Information Rate configuration (hpnicfCirCfgInfoTable), and interface-level QoS application (hpnicfIfApply). Its role is configuration/performance monitoring rather than hardware health: administrators use it to confirm which QoS class and CIR settings are actually applied to each Frame Relay interface/PVC and to detect misapplied or missing QoS policy that could cause congestion or SLA violations on WAN links. It builds on the general concept of class-based QoS shared with other HP Comware QoS MIBs but is specific to the Frame Relay data-link context. It is deployed on HP/H3C Comware routers terminating legacy Frame Relay WAN circuits. Engineers can download the HPN-ICF-FR-QOS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-FR-QOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP/H3C Comware router with Frame Relay WAN interfaces

Monitoring Examples

An administrator would poll hpnicfFrClassCfgInfoTable to confirm which traffic class definitions exist, then check hpnicfCirCfgInfoTable to verify the committed information rate configured for each class matches the provisioned circuit rate. hpnicfIfApply would be checked to confirm a given Frame Relay interface actually has the intended QoS class applied -- a PVC missing an expected entry here would explain unexpected packet loss or congestion despite correct class definitions existing elsewhere.

What Can Be Monitored

Frame Relay QoS class configuration
committed information rate (CIR) settings
per-interface QoS policy application
PVC-level QoS state

Imported Objects

From HPN-ICF-OID-MIB

hpnicfQoS

OBJECT-IDENTITY

From RFC1213-MIB

ifIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfFrQoSMib	1.3.6.1.4.1.11.2.14.11.15.8.32.3			This MIB contains objects to Manage configuration and Monitor running state for Class Based FR QoS feature. ******************************* MIB Tables ******************************** This MIB consists of the following tables: 1 : hpnicfFrClassCfgInfoTable 2 : hpnicfCirCfgInfoTable 3 : hpnicfIfApplyFrClassTable 4 : hpnicfPvcApplyFrClassTable 5 : hpnicfFrPvcBandwidthTable 5 : hpnicfRTPFrClassApplyTable 6 : hpnicfRTPFrPvcQueueRunInfoTable
hpnicfFrQoSObjects	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1
hpnicfFrClassObjects	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1
I32 hpnicfFrClassIndexNext	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.1	Integer32	read-only	This object contains an appropriate value to be used for hpnicfFrClassIndex when creating rows in the hpnicfFrClassCfgInfoTable. Begin with 0.
hpnicfFrClassCfgInfoTable	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.2		not-accessible	A table of Fr Class configuration information.
hpnicfFrClassCfgInfoEntry	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.2.1		not-accessible	Fr Class Configuration Information Entry.
I32 hpnicfFrClassIndex	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.2.1.1	Integer32	not-accessible	Index of Fr Class. Begin with 0.
OCT hpnicfFrClassName	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.2.1.2	OCTET STRING	read-create	Name of Fr Class.
ROW hpnicfFrClassRowStatus	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.2.1.3	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy
hpnicfCirAllowCfgInfoTable	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.3		not-accessible	A table of DCE allowed rate Configuration information.
hpnicfCirAllowCfgInfoEntry	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.3.1		not-accessible	DCE allowed ratee Configuration Information Entry.
I32 hpnicfCirAllowFrClassIndex	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.3.1.1	Integer32	not-accessible	Index of Fr Class. Begin with 0.Equal to hpnicfFrClassIndex
HPN hpnicfCirAllowDirection	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.3.1.2	HpnicfCirAllowDirection	not-accessible	Packet Direction. inbound (1) outbound (2) inbound and outbound (3)
I32 hpnicfCirAllowValue	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.3.1.3	Integer32	read-create	DCE allowed rate (value greater than CIR) Unit : Bits per second. Value : .
ROW hpnicfCirAllowRowStatus	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.3.1.4	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy
hpnicfCirCfgInfoTable	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.4		not-accessible	A table of Committed Information Rate Configuration information.
hpnicfCirCfgInfoEntry	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.4.1		not-accessible	Committed Information Rate Configuration Information Entry.
I32 hpnicfCirFrClassIndex	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.4.1.1	Integer32	not-accessible	Index of Fr Class. Begin with 0.Equal to hpnicfFrClassIndex
I32 hpnicfCirValue	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.4.1.2	Integer32	read-create	CIR in packet output direction ,bps. Value : .
ROW hpnicfCirRowStatus	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.4.1.3	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy
hpnicfIfApplyFrClassTable	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.5		not-accessible	A table of QoS Fr Class instance.
hpnicfIfApplyFrClassEntry	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.5.1		not-accessible	FrClass applied on interface Configuration Information Entry.
I32 hpnicfIfApplyFrClassIfIndex	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.5.1.1	Integer32	not-accessible	Interface Index, equal to ifIndex.
I32 hpnicfIfApplyFrClassIndex	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.5.1.2	Integer32	read-create	Index of Fr Class, equal to hpnicfFrClassIndex
ROW hpnicfIfApplyFrClassRowStatus	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.5.1.3	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy
hpnicfPvcApplyFrClassTable	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.6		not-accessible	A table of QoS Fr Class instance.
hpnicfPvcApplyFrClassEntry	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.6.1		not-accessible	Fr Class applied on FR Pvc Configuration Information Entry.
I32 hpnicfPvcApplyFrClassIfIndex	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.6.1.1	Integer32	not-accessible	Fr Interface Index, equal to ifIndex.
I32 hpnicfPvcApplyFrClassDlciNum	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.6.1.2	Integer32	not-accessible	Fr DLCI number.
I32 hpnicfPvcApplyFrClassIndex	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.6.1.3	Integer32	read-create	Index of Fr Class, equal to hpnicfFrClassIndex
ROW hpnicfPvcApplyFrClassRowStatus	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.6.1.4	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy
hpnicfFrPvcBandwidthTable	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.7		not-accessible	A table of Running statistics for bandwidth.
hpnicfFrPvcBandwidthEntry	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.7.1		not-accessible	Bandwidth Running statistics
I32 hpnicfFrPvcBandwidthMaxReservedBW	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.7.1.1	Integer32	read-only	Max reserved bandWidth. Unit : Kbps
I32 hpnicfFrPvcBandwidthAvailable	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.7.1.2	Integer32	read-only	Available bandWidth. Unit : Kbps
hpnicfRTPQoSObjects	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2
hpnicfRTPFrClassApplyTable	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.1		not-accessible	A table of RTP(Realtime Transport Protocol) Queue instance.
hpnicfRTPFrClassApplyEntry	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.1.1		not-accessible	RTP(Realtime Transport Protocol) Queue Configuration Information Entry.
I32 hpnicfRTPFrClassApplyFrClassIndex	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.1.1.1	Integer32	not-accessible	Fr Class Index, equal to HpnicfFrClassIndex.
I32 hpnicfRTPFrClassApplyStartPort	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.1.1.2	Integer32	read-create	RTP-PORT(3): start-port: 2000~65535
I32 hpnicfRTPFrClassApplyEndPort	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.1.1.3	Integer32	read-create	RTP-PORT(3): end-port: 2000~65535
I32 hpnicfRTPFrClassApplyBandWidth	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.1.1.4	Integer32	read-create	Max bandWidth Value: Absolute value: 8~1000000. Unit: Kbps
I32 hpnicfRTPFrClassApplyCbs	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.1.1.5	Integer32	read-create	Committed Burst Size: 1500~2000000. Unit: byte
ROW hpnicfRTPFrClassApplyRowStatus	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.1.1.6	RowStatus	read-create	RowStatus for RTPFrClassApply Table. Three actions are used: active, createAndGo, destroy
hpnicfRTPFrPvcQueueRunInfoTable	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.2		not-accessible	A table of Running statistics for RTP(Realtime Transport Protocol) Queue applied on the FR PVC
hpnicfRTPFrPvcQueueRunInfoEntry	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.2.1		not-accessible	RTP(Realtime Transport Protocol) Queue statistics entry.
I32 hpnicfRTPFrPvcQueueSize	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.2.1.1	Integer32	read-only	the packet number of RTP(Realtime Transport Protocol) Queue now.
I32 hpnicfRTPFrPvcQueueMaxSize	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.2.1.2	Integer32	read-only	the Max packet number of RTP(Realtime Transport Protocol) Queue.
C32 hpnicfRTPFrPvcQueueOutputs	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.2.1.3	Counter32	read-only	the Output packet number of RTP(Realtime Transport Protocol) Queue.
C32 hpnicfRTPFrPvcQueueDiscards	1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.2.1.4	Counter32	read-only	the Discarded packet number of RTP(Realtime Transport Protocol) Queue.

RFC description

Vendor-private MIB from HP/Aruba for Frame Relay QoS (Quality of Service) management; monitors and configures FR traffic shaping and priority policies.

Start monitoring HP/H3C Comware router with Frame Relay WAN interfaces (Class-Based FR QoS) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-FR-QOS-MIB

What Is HPN-ICF-FR-QOS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description