A3COM-HUAWEI-SYS-MAN-MIB

All MIBs › A3COM-HUAWEI-SYS-MAN-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2009-06-07

Category: Device Management, Vendor: H3C/HH3C

Description: Provides system management objects for H3C/3Com devices, covering system identification, scheduled reboots, software version management, and hardware diagnostics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is A3COM-HUAWEI-SYS-MAN-MIB?

A3COM-HUAWEI-SYS-MAN-MIB is an H3C (Hangzhou H3C Tech. Co., historically branded 3Com/Huawei-3Com under the A3COM-HUAWEI naming convention) system-management MIB covering device clock/time-zone configuration, current configuration/image file tracking, and scheduled or on-demand reloads. It defines h3cSysLocalClock/h3cSysSummerTime* objects for local time and daylight-saving configuration, an h3cSysCurTable (indexed by h3cSysCurEntPhysicalIndex, tying an ENTITY-MIB physical entity to its currently active h3cSysCurCFGFileIndex, h3cSysCurImageIndex, and bootrom filenames) for tracking which config/image a unit is actually running, and an h3cSysReload subtree with h3cSysReloadAction/h3cSysReloadSchedule/h3cSysReloadScheduleTable for scheduling future reloads of specific entities or tag groups — useful on XRN (Expandable Resilient Networking) fabric stacks where multiple physical units need coordinated reloads. Because it exposes both current-state tracking and scheduled-action objects, monitoring it lets an operator confirm which image/config a stack member booted with after a change and verify a scheduled reload is pending as expected. It depends on A3COM-HUAWEI-OID-MIB for its OID root and on SNMP-TARGET-MIB for tag-list typing used by the reload-tag mechanism, and it is deployed on H3C/3Com-Huawei switches and routers, including XRN fabric-capable stacking platforms; administrators can pull the A3COM-HUAWEI-SYS-MAN-MIB MIB Browser output to confirm exact object names before scripting image/reload audits.

IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-SYS-MAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C (3Com-Huawei) switches and routers, including XRN stacking-capable platforms

Monitoring Examples

An operator polls h3cSysCurTable after a firmware push to confirm h3cSysCurImageIndex on each h3cSysCurEntPhysicalIndex matches the newly loaded image, then checks h3cSysReloadScheduleTable to verify a maintenance-window reload is still scheduled; an entity still showing the old image index past the expected reload time would indicate the scheduled reload failed to trigger.

What Can Be Monitored

local clock/summer-time configuration
currently active configuration file index per entity
currently active image index and image type per entity
boot ROM/BTM filename tracking
scheduled reload entries and reload action state
startup/reload notifications

Imported Objects

From A3COM-HUAWEI-OID-MIB

h3cCommon

OBJECT-IDENTITY

From SNMP-TARGET-MIB

SnmpTagList
SnmpTagValue

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT h3cSysBtmErrorStatus	1.3.6.1.4.1.43.45.1.10.2.3.1.6.2.1.5	INTEGER	read-only	This object shows the status of the specified operation after creating a row. invalidFile(1) - file is invalid. inProgress(2) - the operation is in progress. success(3) - the operation was done successfully. failed(4) - the operation failed.
h3cSysBtmFile	1.3.6.1.4.1.43.45.1.10.2.3.1.6
h3cSysBtmFileLoad	1.3.6.1.4.1.43.45.1.10.2.3.1.6.1
OCT h3cSysBtmFileName	1.3.6.1.4.1.43.45.1.10.2.3.1.6.2.1.2	OCTET STRING	read-create	The bootrom file name is determined by the users. The file must exist in corresponding entity. The validity of the bootrom file will be identified by system. If the file is invalid, the bootrom should fail to be updated, and the value of h3cSysBtmErrorStatus should be failed(4).
INT h3cSysBtmFileType	1.3.6.1.4.1.43.45.1.10.2.3.1.6.2.1.3	INTEGER	read-create	main(1) - The effective bootrom file. none(2) - The noneffective file. When bootrom is being updated, this object must be set to main(1). When bootrom is updated successfully, this object should be main(1), and the former object with the same physical index should be none(2). When bootrom failed to be updated, this object should be none(2).
h3cSysBtmLoadEntry	1.3.6.1.4.1.43.45.1.10.2.3.1.6.2.1		not-accessible	Entries in the h3cSysBtmLoadTable are created and deleted using the h3cSysBtmRowStatus object. When a new row is being created and the number of entries is h3cSysBtmLoadMaxNumber, the row with minimal value of h3cSysBtmLoadTime and the value of h3cSysBtmFileType is none(2), should be destroyed automatically.
I32 h3cSysBtmLoadIndex	1.3.6.1.4.1.43.45.1.10.2.3.1.6.2.1.1	Integer32	not-accessible	The index of h3cSysBtmLoadTable. There are two parts for this index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++++++++ + physical index + random index + ( bit 16..31 ) ( bit 0..15 ) +++++++++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes), if the row is created by command line, the value is determined by system, and if the row is created by SNMP, the value is determined by users. From bit16 to bit31 (two bytes) is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. If ENTITY-MIB is not supported, the value of this object is the unit ID for XRN devices, 0 for non-XRN device which has only one main board, the board number for non-XRN device which has multiple main boards.
I32 h3cSysBtmLoadMaxNumber	1.3.6.1.4.1.43.45.1.10.2.3.1.6.1.1	Integer32	read-only	This object shows the maximum number of h3cSysBtmLoadEntry in each device/unit.
h3cSysBtmLoadTable	1.3.6.1.4.1.43.45.1.10.2.3.1.6.2		not-accessible	This table is used to update the bootrom and show the results of the update operation. The bootrom files are listed at the h3cFlhFileTable. These files are used to update bootrom.
TIK h3cSysBtmLoadTime	1.3.6.1.4.1.43.45.1.10.2.3.1.6.2.1.6	TimeTicks	read-only	This object indicates operation time.
ROW h3cSysBtmRowStatus	1.3.6.1.4.1.43.45.1.10.2.3.1.6.2.1.4	RowStatus	read-create	Only support active(1), createAndGo(4), destroy(6). When a row is created successfully, the value of this object should be active(1), the value of h3cSysBtmFileName and h3cSysBtmFileType can not be modified by users. When bootrom is being updated, the value of h3cSysBtmErrorStatus is inProgress(2). When bootrom failed to be updated, the value of h3cSysBtmErrorStatus should be failed(4). When bootrom is updated successfully, the value of h3cSysBtmErrorStatus should be success(3). The value of h3cSysCurUpdateBtmFileName should change to the new bootrom file name. When another row is created successfully with the same physical index, and the update is successful, then the value of former h3cSysBtmFileType should be none(2) automatically. If a row is destroyed, h3cSysCurUpdateBtmFileName should not change. If a device/unit reboots, h3cSysBtmLoadTable should be empty.
h3cSysCFGFile	1.3.6.1.4.1.43.45.1.10.2.3.1.5
h3cSysCFGFileEntry	1.3.6.1.4.1.43.45.1.10.2.3.1.5.2.1		not-accessible	A configuration file entry. Each entry consists of information of a configuration file. h3cSysCFGFileIndex exclusively decides a configuration file.
h3cSysCFGFileGroup	1.3.6.1.4.1.43.45.1.10.2.3.3.2.4			A collection of objects providing mandatory system configuration file information.
I32 h3cSysCFGFileIndex	1.3.6.1.4.1.43.45.1.10.2.3.1.5.2.1.1	Integer32	not-accessible	There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + cfgFile index + +++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes) is the configuration file index; the configuration file index is a monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value, an extremely unlikely event, the agent wraps the value back to 1 and may flush existing entries. From bit16 to bit31 (two bytes) is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. If ENTITY-MIB is not supported, the value for this object is the unit ID for XRN devices ,0 for non-XRN device which has only one slot,the board number for non-XRN device which have several slots. Any index beyond the above range will not be supported.
STR h3cSysCFGFileLocation	1.3.6.1.4.1.43.45.1.10.2.3.1.5.2.1.4	DisplayString	read-only	The directory path of the image. Its form should be the same as what defined in filesystem. Currently it is defined as follows: For mainboard: flash:/ For slave mainboard and subboards: slotN#flash:/ For XRN devices: unitN>slotN#flash:/
STR h3cSysCFGFileName	1.3.6.1.4.1.43.45.1.10.2.3.1.5.2.1.2	DisplayString	read-only	Configuration file name. The name should not include the colon (:) character as it is a special separator character used to delineate the device name, partition name and the file name.
I32 h3cSysCFGFileNum	1.3.6.1.4.1.43.45.1.10.2.3.1.5.1	Integer32	read-only	The number of the configuration files in the system. It indicates the total entries of h3cSysCFGFileTable.
I32 h3cSysCFGFileSize	1.3.6.1.4.1.43.45.1.10.2.3.1.5.2.1.3	Integer32	read-only	Size of the file in bytes. Note that it does not include the size of the filesystem file header. File size will always be non-zero.
h3cSysCFGFileTable	1.3.6.1.4.1.43.45.1.10.2.3.1.5.2		not-accessible	A table of configuration files in this system. At present, the system doesn't support dual configure file, it should act as 'dual image' if dual configure file is supported.
h3cSysClock	1.3.6.1.4.1.43.45.1.10.2.3.1.1
NTF h3cSysClockChangedNotification	1.3.6.1.4.1.43.45.1.10.2.3.2.1			A clock changed notification is generated when the current local date and time for the system has been manually changed. The value of h3cSysLocalClock reflects new date and time.
h3cSysClockGroup	1.3.6.1.4.1.43.45.1.10.2.3.3.2.1			A collection of objects providing mandatory system clock information.
OCT h3cSysCurBtmFileName	1.3.6.1.4.1.43.45.1.10.2.3.1.2.1.1.4	OCTET STRING	read-only	The bootrom file currently used by the specified entity.
I32 h3cSysCurCFGFileIndex	1.3.6.1.4.1.43.45.1.10.2.3.1.2.1.1.2	Integer32	read-only	The startup configuration file currently used by the specified entity. If the value of it is zero, no configuration file is used. It will be the value of corresponding h3cSysCFGFileIndex in h3cSysCFGFileTable.
I32 h3cSysCurEntPhysicalIndex	1.3.6.1.4.1.43.45.1.10.2.3.1.2.1.1.1	Integer32	not-accessible	The value of this object is the entity index which depends on the implementation of ENTITY-MIB. If ENTITY-MIB is not supported, the value for this object is the unit ID for XRN devices , 0 for non-XRN device which has only one mainboard, the board number for non-XRN device which have several mainboards.
h3cSysCurEntry	1.3.6.1.4.1.43.45.1.10.2.3.1.2.1.1		not-accessible	An entry of h3cSysCurTable.
h3cSysCurGroup	1.3.6.1.4.1.43.45.1.10.2.3.3.2.5			A collection of system current status.
I32 h3cSysCurImageIndex	1.3.6.1.4.1.43.45.1.10.2.3.1.2.1.1.3	Integer32	read-only	The image file currently used by the specified entity. It will be the value of corresponding h3cSysImageIndex in h3cSysImageTable.
h3cSysCurrent	1.3.6.1.4.1.43.45.1.10.2.3.1.2
h3cSysCurTable	1.3.6.1.4.1.43.45.1.10.2.3.1.2.1		not-accessible	The current status of system. A configuration file, an image file and bootrom information are used to describe the current status.
OCT h3cSysCurUpdateBtmFileName	1.3.6.1.4.1.43.45.1.10.2.3.1.2.1.1.5	OCTET STRING	read-only	The default value of this object is the same as the value of h3cSysCurBtmFileName. The value will be changed after updating the bootrom successfully. This bootrom will take effect on next startup.
h3cSysImage	1.3.6.1.4.1.43.45.1.10.2.3.1.4
h3cSysImageEntry	1.3.6.1.4.1.43.45.1.10.2.3.1.4.2.1		not-accessible	An entity image entry. Each entry consists of information of an entity image. The h3cSysImageIndex exclusively defines an image file.
h3cSysImageGroup	1.3.6.1.4.1.43.45.1.10.2.3.3.2.3			A collection of objects providing mandatory system image information.
I32 h3cSysImageIndex	1.3.6.1.4.1.43.45.1.10.2.3.1.4.2.1.1	Integer32	not-accessible	There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + image index + +++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes) is the image index;Image file Index is a monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value, an extremely unlikely event, the agent wraps the value back to 1 and may flush existing entries. From bit16 to bit31 (two bytes) is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. If ENTITY-MIB is not supported,the value for this object is the unit ID for XRN devices ,0 for non-XRN device which has only one main board,the board number for non-XRN device which have several main boards. Any index beyond the above range will not be supported. If a file is added in, its h3cSysImageIndex will be the maximum image index plus one. If the image file is removed, renamed, or moved from one place to another, its h3cSysImageIndex is not reallocated. If the image file's content is replaced, its h3cSysImageIndex will not change.
STR h3cSysImageLocation	1.3.6.1.4.1.43.45.1.10.2.3.1.4.2.1.4	DisplayString	read-only	The directory path of the image. Its form should be the same as what defined in file system. Currently it is defined as follows: For mainboard: flash:/ For slave mainboard and subboards: slotN#flash:/ For XRN devices: unitN>slotN#flash:/
STR h3cSysImageName	1.3.6.1.4.1.43.45.1.10.2.3.1.4.2.1.2	DisplayString	read-only	The file name of the image. It MUST NOT contain the path of the file.
I32 h3cSysImageNum	1.3.6.1.4.1.43.45.1.10.2.3.1.4.1	Integer32	read-only	The number of system images. It indicates the total entries of h3cSysImageTable.
I32 h3cSysImageSize	1.3.6.1.4.1.43.45.1.10.2.3.1.4.2.1.3	Integer32	read-only	Size of the file in bytes.
h3cSysImageTable	1.3.6.1.4.1.43.45.1.10.2.3.1.4.2		not-accessible	The system image management table. When 'copy srcfile destfile' is executed via the CLI, if destfile is not existed, then h3cSysImageType of the new file will be 'none'; otherwise h3cSysImageType keeps its current value. When 'move srcfile destfile' is executed via the CLI, h3cSysImageType and h3cSysImageIndex remain the same while h3cSysImageLocation changes. When 'rename srcfile' is executed via the CLI,h3cSysImageType and h3cSysImageIndex remain the same while h3cSysImageName changes. When 'delete srcfile' is executed via the CLI, the file is deleted from h3cSysImageTable while index of the file keeps and will not be allocated.
INT h3cSysImageType	1.3.6.1.4.1.43.45.1.10.2.3.1.4.2.1.5	INTEGER	read-write	It indicates the reloading sequence attribute of the image. For devices which support dual image: If the value is 'main(1)',the image will be the first image in the next reloading procedure. If the value is 'backup(2)', the image will be used if the main image fails. If the value is 'secure(4)', the image will be used if the main image and backup image both fail. If the value is 'none(3)',the image will not be used in the next reloading procedure. At the same time,you also can specify the main image by h3cSysReloadImage in h3cSysReloadScheduleTable. If the image is different from previous main image, the previous main image will not be main image again. And the image table will update with this variation. Vice versa, if you have defined the reload schedule, and then you define a new main image through h3cSysImageType when you are waiting the reload schedule to be executed, the real main image will be the latest one. It is strongly suggested to define the main image here, not by h3cSysReloadImage in h3cSysReloadScheduleTable. There are some rules for setting the value of h3cSysImageType: a)When a new image file is defined as 'main' or 'backup' file,the h3cSysImageType of old 'main' or 'backup' file will automatically be 'none'. b)It is forbidden to set 'none' attribute manually. c)It is forbidden to set 'secure' attribute manually. d)If 'main' image is set to 'backup', the file keeps 'main'. And vice versa. At this time, the file has 'main-backup' property. e)If the secure image is set to 'main' or 'backup', the file has 'main-secure' or 'backup-secure'property. f)If the secure image is set to 'main' and 'backup', the file has the 'main-backup-secure' property. g)If the none image is set to 'main' or 'backup', the file has the 'main' or 'backup' property. The following table describes whether it is ok to set to another state directly from original state. +--------------+-----------+-------------+-------------+ \| set to \| set to \| set to \| set to \| \| \| \| \| \| original \| 'main' \| 'backup' \| 'none' \| 'secure' \| state \| \| \| \| \| --------------+--------------+-----------+-------------+-------------+ \| \| \| \| \| main \| --- \| yes \| no \| no \| \| \| \| \| \| \| \| \| \| \| --------------+--------------+-----------+-------------\|-------------+ \| \| \| \| \| backup \| yes \| --- \| no \| no \| \| \| \| \| \| --------------+--------------+-----------+-------------\|-------------+ \| \| \| \| \| \| \| \| \| \| none \| yes \| yes \| --- \| no \| \| \| \| \| \| --------------+--------------+-----------+-------------+-------------+ \| \| \| \| \| secure \| yes \| yes \| no \| --- \| \| \| \| \| \| \| \| \| \| \| --------------+--------------+-----------+-------------+-------------+ If there is one main image in the system, one row of H3cSysReloadScheduleEntry whose h3cSysReloadImage is equal to the main image's h3cSysImageIndex will be created automatically. But if any row is deleted, it will not be created automatically in h3cSysReloadScheduleTable. For the device which doesn't support dual image(main/backup): Only 'main' and 'none' is supported and it only can be set from none to main. When a new image file is defined as 'main' file,the h3cSysImageType of old 'main' file will automatically be 'none'.
h3cSysIpeFile	1.3.6.1.4.1.43.45.1.10.2.3.1.8
h3cSysIpeFileEntry	1.3.6.1.4.1.43.45.1.10.2.3.1.8.2.1		not-accessible	An IPE package file entry. Each entry consists of information of an IPE package file. h3cSysIpeFileIndex exclusively decides an IPE file.
I32 h3cSysIpeFileIndex	1.3.6.1.4.1.43.45.1.10.2.3.1.8.2.1.1	Integer32	not-accessible	There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + IPE index + +++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes) is the IPE file index; IPE file Index is a monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value, an extremely unlikely event, the agent wraps the value back to 1 and may flush existing entries. From bit16 to bit31 (two bytes) is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. Any index beyond the above range will not be supported. If a file is added in, its h3cSysIpeFileIndex will be the maximum image ndex plus one. If the IPE file is removed, renamed, or moved from one place to another, its h3cSysIpeFileIndex is not reallocated. If the IPE file's content is replaced, its h3cSysIpeFileIndex will not change.
STR h3cSysIpeFileLocation	1.3.6.1.4.1.43.45.1.10.2.3.1.8.2.1.4	DisplayString	read-only	The directory path of the IPE file. Its form should be the same as what defined in file system. Currently it is defined as follows: For mainboard: flash:/ For slave mainboard and subboards: slotN#flash:/
STR h3cSysIpeFileName	1.3.6.1.4.1.43.45.1.10.2.3.1.8.2.1.2	DisplayString	read-only	The file name of the IPE file. It MUST NOT contain the path of the file.
I32 h3cSysIpeFileNum	1.3.6.1.4.1.43.45.1.10.2.3.1.8.1	Integer32	read-only	The number of software IPE(Image Package Envelop) files. It indicates the total entries of h3cSysIpeFileTable.
INT h3cSysIpeFileOperateAttribute	1.3.6.1.4.1.43.45.1.10.2.3.1.8.4.1.3	INTEGER	read-create	It indicates the attribute of the IPE file when it is used in the reloading. If the value is 'primary', the packages in the IPE file will be the first packages in the next reloading procedure. If the value is 'secondary', the package in the IPE file will be used if the primary packages fails. If the value is 'none', the IPE file is only unpacked, will not be used in the reloading procedure.
h3cSysIpeFileOperateEntry	1.3.6.1.4.1.43.45.1.10.2.3.1.8.4.1		not-accessible	An operate request entry.
I32 h3cSysIpeFileOperateFileIndex	1.3.6.1.4.1.43.45.1.10.2.3.1.8.4.1.2	Integer32	read-create	Specify the IPE file in the h3cSysIpeFileTable. This IPE file will be unpacked to package files.
I32 h3cSysIpeFileOperateIndex	1.3.6.1.4.1.43.45.1.10.2.3.1.8.4.1.1	Integer32	not-accessible	The unique index value of a row in this table.
INT h3cSysIpeFileOperateResult	1.3.6.1.4.1.43.45.1.10.2.3.1.8.4.1.5	INTEGER	read-only	the result of the operation.
ROW h3cSysIpeFileOperateRowStatus	1.3.6.1.4.1.43.45.1.10.2.3.1.8.4.1.4	RowStatus	read-create	the status of this table entry. When the status is active all the object's value in the entry is not allowed to modified.
h3cSysIpeFileOperateTable	1.3.6.1.4.1.43.45.1.10.2.3.1.8.4		not-accessible	A table of IPE file operate.
U32 h3cSysIpeFileSize	1.3.6.1.4.1.43.45.1.10.2.3.1.8.2.1.3	Unsigned32	read-only	Size of the file in bytes.
h3cSysIpeFileTable	1.3.6.1.4.1.43.45.1.10.2.3.1.8.2		not-accessible	The system IPE file manage table.
STR h3cSysIpePackageDescription	1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1.5	DisplayString	read-only	It is the description of the package.
h3cSysIpePackageEntry	1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1		not-accessible	An entry of the h3cIpePackageTable. Indexed by h3cSysIpeFileIndex and h3cSysIpePackageIndex.
STR h3cSysIpePackageFeature	1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1.6	DisplayString	read-only	Indicate the feature of the package.
I32 h3cSysIpePackageIndex	1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1.1	Integer32	not-accessible	It is the IPE package index; IPE Package Index is a monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value, an extremely unlikely event, the agent wraps the value back to 1 and may flush existing entries. Any index beyond the above range will not be supported.
STR h3cSysIpePackageName	1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1.2	DisplayString	read-only	The file name of the package file.
U32 h3cSysIpePackageSize	1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1.3	Unsigned32	read-only	Size of the package file in bytes.
h3cSysIpePackageTable	1.3.6.1.4.1.43.45.1.10.2.3.1.8.3		not-accessible	The IPE package file table. It shows the package files in the IPE file.
INT h3cSysIpePackageType	1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1.4	INTEGER	read-only	It indicates the type of the package file. boot : kernel, file system, memory management and other core components. system : interface management, configuration management and other basic system package. feature : feature packages, providing different services. patch : patch file contains fixes for a specific defect.
STR h3cSysIpePackageVersion	1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1.7	DisplayString	read-only	The version of the package.
DAT h3cSysLocalClock	1.3.6.1.4.1.43.45.1.10.2.3.1.1.1	DateAndTime	read-write	This node gives the current local time of the system. The unit of it is DateAndTime.
OCT h3cSysLocalClockString	1.3.6.1.4.1.43.45.1.10.2.3.1.1.3	OCTET STRING	read-write	This node gives the current local time of the system. For example, Tuesday May 26, 2002 at 1:30:15 would be displayed as: 2002-5-26T13:30:15.0Z
h3cSysPackage	1.3.6.1.4.1.43.45.1.10.2.3.1.7
INT h3cSysPackageAttribute	1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.6	INTEGER	read-write	It indicates the attribute of the package file. If the value is 'primary', the package will be the first package in the next reloading procedure. If the value is 'secondary', the package will be used if the primary package fails. If the value is 'none', it will not be used in the next reloading procedure.
STR h3cSysPackageDescription	1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.8	DisplayString	read-only	It is the description of the package.
h3cSysPackageEntry	1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1		not-accessible	An software package entry. Each entry consists of information of an software package.
STR h3cSysPackageFeature	1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.9	DisplayString	read-only	Indicate the feature of the package. Different package files could be the same feature.
I32 h3cSysPackageIndex	1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.1	Integer32	not-accessible	There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + package index + +++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes) is the Package index; Package file Index is a monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value, an extremely unlikely event, the agent wraps the value back to 1 and may flush existing entries. From bit16 to bit31 (two bytes) is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. Any index beyond the above range will not be supported. If a file is added in, its h3cSysPackageIndex will be the maximum image index plus one. If the package file is removed, renamed, or moved from one place to another, its h3cSysPackageIndex is not reallocated. If the package file's content is replaced, its h3cSysPackageIndex will not change.
STR h3cSysPackageLocation	1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.4	DisplayString	read-only	The directory path of the package. Its form should be the same as what defined in file system. Currently it is defined as follows: For mainboard: flash:/ For slave mainboard and subboards: slotN#flash:/
STR h3cSysPackageName	1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.2	DisplayString	read-only	The file name of the package. It MUST NOT contain the path of the file.
I32 h3cSysPackageNum	1.3.6.1.4.1.43.45.1.10.2.3.1.7.1	Integer32	read-only	The number of software packages. It indicates the total entries of h3cSysPackageTable.
h3cSysPackageOperateEntry	1.3.6.1.4.1.43.45.1.10.2.3.1.7.4.1		not-accessible	An operate request entry.
I32 h3cSysPackageOperateEntryLimit	1.3.6.1.4.1.43.45.1.10.2.3.1.7.3	Integer32	read-write	The maximum number of the entries in h3cSysPackageOperateTable.
I32 h3cSysPackageOperateIndex	1.3.6.1.4.1.43.45.1.10.2.3.1.7.4.1.1	Integer32	not-accessible	The unique index value of a row in this table.
I32 h3cSysPackageOperatePackIndex	1.3.6.1.4.1.43.45.1.10.2.3.1.7.4.1.2	Integer32	read-create	Specify the package file in the h3cSysPackageTable.
INT h3cSysPackageOperateResult	1.3.6.1.4.1.43.45.1.10.2.3.1.7.4.1.5	INTEGER	read-only	the result of the operation.
ROW h3cSysPackageOperateRowStatus	1.3.6.1.4.1.43.45.1.10.2.3.1.7.4.1.4	RowStatus	read-create	the status of this table entry. When the status is active all the object's value in the entry is not allowed to modified.
INT h3cSysPackageOperateStatus	1.3.6.1.4.1.43.45.1.10.2.3.1.7.4.1.3	INTEGER	read-create	activate or deactivate a package in the h3cSysPackageTable.
h3cSysPackageOperateTable	1.3.6.1.4.1.43.45.1.10.2.3.1.7.4		not-accessible	A table of package file operate.
U32 h3cSysPackageSize	1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.3	Unsigned32	read-only	Size of the file in bytes.
INT h3cSysPackageStatus	1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.7	INTEGER	read-only	It indicates the status of the package file. If this file is used in the current system, its status is 'active'.
h3cSysPackageTable	1.3.6.1.4.1.43.45.1.10.2.3.1.7.2		not-accessible	The system package management table.
INT h3cSysPackageType	1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.5	INTEGER	read-only	It indicates the type of the package file. boot : kernel, file system, memory management and other core components. system : interface management, configuration management and other basic system package. feature : feature packages, providing different services. patch : patch file contains fixes for a specific defect.
STR h3cSysPackageVersion	1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.10	DisplayString	read-only	Indicate the version of the package.
h3cSysReload	1.3.6.1.4.1.43.45.1.10.2.3.1.3
INT h3cSysReloadAction	1.3.6.1.4.1.43.45.1.10.2.3.1.3.2	INTEGER	read-write	Writing reloadOnSchedule(2) to this object performs the reload operation on schedule. If h3cSysReloadScheduleTime is not set, the value of h3cSysReloadAction can't be set to 'reloadOnSchedule(2)'. Writing reloadAtOnce(3)to this object performs the reload operation at once, regardless of the h3cSysReloadScheduleTime. When reloadCancel(4)is set, the scheduled reload action will be cancelled and the value of h3cSysReloadAction will be 'reloadUnavailable(1)',the value of h3cSysReloadSchedule will be 0, h3cSysReloadTag will be given a value of zero length, but the content of h3cSysReloadScheduleTable will remain. The h3cSysReloadSchedule and h3cSysReloadTag determine the reload entity(ies) in mutually exclusive way. And the h3cSysReloadSchedule will be handled at first. If the value of h3cSysReloadSchedule is invalid, then the h3cSysReloadTag will be handled. If the value of h3cSysReloadSchedule is valid, the value of h3cSysReloadTag is ignored and a reload action will be implemented to the entity specified by h3cSysReloadEntity in the entry pointed by h3cSysReloadSchedule. If h3cSysReloadSchedule is valid, but the entry h3cSysReloadSchedule pointing to is not active, the reload action will be ignored , and an inconsistent value will be returned. If multiple entities are required to be reloaded at the same time, the value of h3cSysReloadTag must be specified to select the reload parameters in the h3cSysReloadSceduelTable, and h3cSysReloadSchedule must have the value of '0'. If the whole fabric is to be reloaded in an XRN device, all the units in the fabric must have at least one entry in the h3cSysReloadSceduelTable with the same tag in h3cSysReloadSceduelTagList. When a reload action is done, or there is no reload action, the value should be reloadUnavailable(1).
I32 h3cSysReloadCfgFile	1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.3	Integer32	read-create	The value indicates an entry in h3cSysCFGFileTable. It defines a configuration file for reload action. It is the value of corresponding h3cSysCFGFileIndex in h3cSysCFGFileTable. The zero value means no configuration file has been set for this entry, and no configuration file is used during system reloading.
I32 h3cSysReloadEntity	1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.2	Integer32	read-create	The value of h3cSysReloadEntity indicates an entry in entPhysicalTable, which is the physical entity to be reloaded. If ENTITY-MIB is not supported,the value for this object is the unit ID for XRN devices , 0 for non-XRN device which has only one mainboard, the board number for non-XRN device which have several mainboards. Each entity has only one row in h3cSysReloadScheduleTable.
h3cSysReloadGroup	1.3.6.1.4.1.43.45.1.10.2.3.3.2.2			A collection of objects providing mandatory system reload.
I32 h3cSysReloadImage	1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.4	Integer32	read-create	The value indicates an entry in h3cSysImageTable. It defines an image file for reload action. It is the value of corresponding h3cSysImageIndex in h3cSysImageTable. If dual image is supported, the main image attribute can be set through this object or by h3cSysImageType of h3cSysImageTable of the entity. It is strongly suggested to set this attribute by the latter. If main image attribute is set here, the h3cSysImageType in h3cSysImageTable of the corresponding entity will be updated, and vice versa. Before reboot, the device will check the validation of the entry. If the file does not exist, the device will not reboot and a trap will be send to NMS.
NTF h3cSysReloadNotification	1.3.6.1.4.1.43.45.1.10.2.3.2.2			A h3cSysReloadNotification will be sent before the corresponding entity is rebooted. It will also be sent if the entity fails to reboot because the clock has changed.
STR h3cSysReloadReason	1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.5	DisplayString	read-create	The reason of system's reloading. It is a zero length octet string when not set.
ROW h3cSysReloadRowStatus	1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.7	RowStatus	read-create	If one of the value of h3cSysReloadEntity,h3cSysReloadImage is invalid, the value of h3cSysReloadRowStatus can not be set to the value of ACTIVE. A valid entry means the specified element is available in current system.
I32 h3cSysReloadSchedule	1.3.6.1.4.1.43.45.1.10.2.3.1.3.1	Integer32	read-write	The object points one row in h3cSysReloadScheduleTable. Its value is equal to the value of h3cSysReloadScheduleIndex. When a reload action is finished, the value of it would be zero which means no any reload schedule is selected.
h3cSysReloadScheduleEntry	1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1		not-accessible	Entry of h3cSysReloadScheduleTable.
I32 h3cSysReloadScheduleIndex	1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.1	Integer32	not-accessible	The index of h3cSysReloadScheduleTable. There are two parts for this index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++++++++ + physical index + random index + ( bit 16..31 ) ( bit 0..15 ) +++++++++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes), if the row is automatic created, the value is zero, and if the row is created by users, then the value is determined by the users. From bit16 to bit31 (two bytes) is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. For XRN devices, physical index is the value of a chassis entPhysicalIndex. 0 for non-XRN device which has only one main board, the board number for non-XRN device which have multiple main boards.
h3cSysReloadScheduleTable	1.3.6.1.4.1.43.45.1.10.2.3.1.3.3		not-accessible	A reload parameters set table. The table is exclusively used for reloading. When reloading action finished, the value of the table may be empty or still exist. If the mainboard in non-XRN device or all the units of the fabric in XRN device are reloaded,then the table will be refreshed.
SNM h3cSysReloadScheduleTagList	1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.8	SnmpTagList	read-create	It specifies a tag list for the entry.
DAT h3cSysReloadScheduleTime	1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.6	DateAndTime	read-create	Specify the local time at which the reload action will occur. we will only take octet strings with length 8 for this object which indicates the local time of the switch. The maximum scheduled interval between the specified time and the current system clock time is 24 days . field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 For example, Tuesday May 26, 1992 at 1:30:15 PM would be displayed as: 1992-5-26,13:30:15 If the set value is less than the value of h3cSysLocalClock or beyond the maximum scheduled time limit, a bad value error occurred. The value of all-zero octet strings indicates system reload at once if the reload action is reloadOnSchedule(2).
SNM h3cSysReloadTag	1.3.6.1.4.1.43.45.1.10.2.3.1.3.4	SnmpTagValue	read-write	This object contains a single tag value which is used to select entries in the h3cSysReloadScheduleTable. In the h3cSysReloadScheduleTable,any entry that contains a tag value which is equal to the value of this object is selected. For example, the value of h3cSysReloadTag is 'TOM',and the h3cSysReloadScheduleTagList of each h3cSysReloadScheduleTable entry are as follows: 1)'TOM,ROBERT,MARY' 2)'TOM,DAVE' 3)'DAVE,MARY' Since there are 'TOM' in 1) and 2),so 1) and 2) are selected. If this object contains a value of zero length, no entries are selected.
NTF h3cSysStartUpNotification	1.3.6.1.4.1.43.45.1.10.2.3.2.3			a h3cSysStartUpNotification trap will be sent when the system starts up with 'main' image file failed, a trap will be sent to indicate which type the current image file (I.e backup or secure)is.
h3cSysSummerTime	1.3.6.1.4.1.43.45.1.10.2.3.1.1.2
INT h3cSysSummerTimeEnable	1.3.6.1.4.1.43.45.1.10.2.3.1.1.2.1	INTEGER	read-only	This node indicates the status of summer time. If the value of this node is enable, means that summer time is enabled. If the value is disable, means that summer time is disabled.
DAT h3cSysSummerTimeEnd	1.3.6.1.4.1.43.45.1.10.2.3.1.1.2.5	DateAndTime	read-write	This node provides the end time of summer time. The end time must be more than start time one day and less than start time one year.
INT h3cSysSummerTimeMethod	1.3.6.1.4.1.43.45.1.10.2.3.1.1.2.3	INTEGER	read-write	This node provides the execute method of summer time. oneOff(1): means that summer time only takes effect at specified time. repeating(2): means that summer time takes effect in specified month/day once a year.
I32 h3cSysSummerTimeOffset	1.3.6.1.4.1.43.45.1.10.2.3.1.1.2.6	Integer32	read-write	This node provides the offset time of summer time. The offset time(in seconds) means that how much time need to be appended to the local time.
DAT h3cSysSummerTimeStart	1.3.6.1.4.1.43.45.1.10.2.3.1.1.2.4	DateAndTime	read-write	This node provides the start time of summer time.
STR h3cSysSummerTimeZone	1.3.6.1.4.1.43.45.1.10.2.3.1.1.2.2	DisplayString	read-write	This node describes the name of time zone in summer. The string is only used to display in local time when summer time is running. That the value of h3cSysLocalClock has the time zone information means that summer time is running.
h3cSystemBtmLoadGroup	1.3.6.1.4.1.43.45.1.10.2.3.3.2.7			A collection of objects providing system update bootrom information.
h3cSystemMan	1.3.6.1.4.1.43.45.1.10.2.3			This MIB contains objects to manage the system. It focuses on the display of current configure file and image file,and the definition of reloading image. Add the support for XRN.
h3cSystemManMIBCompliance	1.3.6.1.4.1.43.45.1.10.2.3.3.1.1			The compliance statement for entities which implement the system management MIB.
h3cSystemManMIBCompliances	1.3.6.1.4.1.43.45.1.10.2.3.3.1
h3cSystemManMIBConformance	1.3.6.1.4.1.43.45.1.10.2.3.3
h3cSystemManMIBGroups	1.3.6.1.4.1.43.45.1.10.2.3.3.2
h3cSystemManMIBNotifications	1.3.6.1.4.1.43.45.1.10.2.3.2
h3cSystemManMIBObjects	1.3.6.1.4.1.43.45.1.10.2.3.1
h3cSystemManNotificationGroup	1.3.6.1.4.1.43.45.1.10.2.3.3.2.6			A collection of notifications.

RFC description

H3C system management for configuration files, image loading, and device reboot control.

Start monitoring H3C/3Com switches and routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download A3COM-HUAWEI-SYS-MAN-MIB

What Is A3COM-HUAWEI-SYS-MAN-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description