HH3C-FTM-MIB

All MIBs › HH3C-FTM-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2004-01-13

Category: Device Management, Technology: Stacking, Vendor: H3C/HH3C

Description: Manages H3C Fabric Topology Management (FTM) for IRF/stacking fabric link status and topology discovery.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-FTM-MIB?

This is an H3C (Hangzhou Huawei-3Com) private MIB for Fabric Topology Management (FTM), used to manage and monitor the stacking/IRF (Intelligent Resilient Framework) fabric that binds multiple physical switches into one logical unit. Per its module description, it covers unit-id and unit-name identification along with fabric authentication information, though no sample objects were available in this batch to ground specific field names. Its likely monitoring value is hardware/topology status: confirming which physical units are members of the fabric, their assigned unit IDs/names, and whether fabric link authentication is properly configured, which together reveal a stack member that has dropped out of the fabric or a mismatched authentication key blocking a unit from joining. It is a vendor-specific analog to concepts found in other stacking-technology MIBs (e.g., Cisco's StackWise or Juniper's Virtual Chassis MIBs) but is not directly derived from them. It's typically deployed in H3C IRF/stacked switch environments for fabric topology health monitoring. Engineers can download the HH3C-FTM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-FTM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C IRF/stacked switch

Monitoring Examples

No object list was available in the source for this MIB, so a concrete polling scenario cannot be grounded in verified object names; based on the module description, an admin would typically poll a unit-id/unit-name table to confirm all expected stack members are present in the fabric and check fabric authentication status to diagnose a unit failing to join the IRF stack.

Imported Objects

From HH3C-OID-MIB

hh3cCommon

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cFtm	1.3.6.1.4.1.25506.2.1
hh3cFtmManMIB	1.3.6.1.4.1.25506.2.1.1			this MIB will maintain Fabric topology management. The MIB includes unit-id, unit-name and fabric authentication information.
hh3cFtmManMIBObjects	1.3.6.1.4.1.25506.2.1.1.1
hh3cFtmUnitTable	1.3.6.1.4.1.25506.2.1.1.1.1		not-accessible	A table of informations of XRN-Fabric Unit.
hh3cFtmUnitEntry	1.3.6.1.4.1.25506.2.1.1.1.1.1		not-accessible	An entry for configuring unit informations of XRN-Fabric.
I32 hh3cFtmIndex	1.3.6.1.4.1.25506.2.1.1.1.1.1.1	Integer32	accessible-for-notify	The unique index of a unit.
INT hh3cFtmUnitID	1.3.6.1.4.1.25506.2.1.1.1.1.1.2	INTEGER	read-write	Identifer of unit in fabric. Its value should be between 1 and the maximum which defines in product specification. An exception is described in description of hh3cFtmNumberMode. In that case, the value of this object remains its original value after set to zero.
OCT hh3cFtmUnitName	1.3.6.1.4.1.25506.2.1.1.1.1.1.3	OCTET STRING	read-write	Name of unit in XRN-Fabric. It consists of no more than 64 characters.
INT hh3cFtmUnitRole	1.3.6.1.4.1.25506.2.1.1.1.1.1.4	INTEGER	read-only	Role of unit in XRN-Fabric. One unit in a XRN-Fabric acts as master role and others act as slave roles
INT hh3cFtmNumberMode	1.3.6.1.4.1.25506.2.1.1.1.1.1.5	INTEGER	read-only	Numbering Mode of unit in XRN-Fabric. If the unit ID is assigned by the auto numbering algorithm, the numbering mode will be automatic numbering; if the unit ID (hh3cFtmUnitID) is assigned by the user, the numbering mode will be manual numbering; if hh3cFtmUnitID is set to be zero, the numbering mode will become automatic numbering.
INT hh3cFtmAuthMode	1.3.6.1.4.1.25506.2.1.1.1.2	INTEGER	read-write	Authentication mode of XRN-Fabric.
OCT hh3cFtmAuthValue	1.3.6.1.4.1.25506.2.1.1.1.3	OCTET STRING	read-write	Authentication value of XRN-Fabric Feature. ftm_none mode means no authentication. In simple mode, the value is password of a string of 1 to 16 charactors. While in md5 mode, the value is key of a string within 16 charactors.
INT hh3cFtmFabricVlanID	1.3.6.1.4.1.25506.2.1.1.1.4	INTEGER	read-write	The object is used for get and set the Fabric VlanID. Only is the equipment not in the stacking status, the value can be set.
INT hh3cFtmFabricType	1.3.6.1.4.1.25506.2.1.1.1.5	INTEGER	read-only	Topology type of Fabric. outofStack means this unit is not in stack.
hh3cFtmManMIBComformance	1.3.6.1.4.1.25506.2.1.1.2
hh3cFtmMIBCompliances	1.3.6.1.4.1.25506.2.1.1.2.1
hh3cFtmMIBCompliance	1.3.6.1.4.1.25506.2.1.1.2.1.1			The compliance statement for FTM implementing the MIB.
hh3cFtmMIBGroups	1.3.6.1.4.1.25506.2.1.1.2.2
hh3cFtmConfigGroup	1.3.6.1.4.1.25506.2.1.1.2.2.1			The basic collection of objects for sending trap of FTM Management.
hh3cFtmNotificationGroup	1.3.6.1.4.1.25506.2.1.1.2.2.2			The basic collection of objects for sending trap of FTM Management.
hh3cFtmManMIBNotification	1.3.6.1.4.1.25506.2.1.1.3
NTF hh3cFtmUnitIDChange	1.3.6.1.4.1.25506.2.1.1.3.1			When unit id changes in fabric, this trap is sent with unit index and its new id .
NTF hh3cFtmUnitNameChange	1.3.6.1.4.1.25506.2.1.1.3.2			When unit name changes in fabric, this trap is sent with unit index and its new name.

RFC description

Manages fabric topology, unit identification, and fabric authentication in H3C XRN-Fabric switches.

Start monitoring H3C IRF/stacked switch (Fabric Topology Management) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-FTM-MIB

What Is HH3C-FTM-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description