HH3C-IFQOS2-MIB

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HH3C-IFQOS2-MIB

Organization: H3C Technologies Co.,Ltd.

Last Updated: 2008-12-02

Category: Quality of Service, Vendor: H3C/HH3C

Description: Manages per-interface QoS queuing, scheduling, and shaping policies on H3C network device interfaces.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-IFQOS2-MIB?

HH3C-IFQOS2-MIB is an H3C enterprise MIB for per-interface Quality of Service (QoS) management, covering queuing, scheduling, and traffic-shaping policies applied to network device interfaces to prioritize and rate-limit traffic classes. It is expected to expose interface-level QoS policy bindings, queue configuration, and possibly queue-drop/traffic statistics per interface. Its monitoring value centers on software/service configuration and performance: confirming which QoS policy and queue scheduling scheme is applied to an interface, and whether queues are dropping packets, which is critical for diagnosing congestion or SLA violations on latency-sensitive traffic. It builds on and complements the base interface (IF-MIB) and the general QoS framework on the H3C platform rather than replacing them. Typical deployment is on H3C routers/switches carrying differentiated traffic classes (voice, video, data) needing per-interface QoS enforcement. Network engineers evaluating or troubleshooting this functionality can download the HH3C-IFQOS2-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-IFQOS2-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • H3C router/switch interface with QoS enforcement

Monitoring Examples

No specific objects were sampled for this MIB, so exact identifiers can't be cited, but based on its purpose an operator would typically check the QoS policy/queue configuration bound to a given interface and any associated queue-drop counters, to detect whether a priority queue is dropping packets or a shaping policy is throttling traffic unexpectedly.

What Can Be Monitored

  • interface QoS policy binding
  • queue scheduling configuration
  • traffic shaping parameters
  • queue drop statistics
Imported Objects

From HH3C-OID-MIB

hh3cCommonOBJECT-IDENTITY

From RFC1213-MIB

ifIndex

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using hh3cIfQoSPassPackets OID:

Select an H3C router/switch interface with QoS enforcement (v2) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hh3cIfQoSPassPackets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of forwarded packets. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs

RFC description

Vendor-private H3C (Huawei 3Com) MIB for interface QoS configuration and statistics.

Start monitoring H3C router/switch interface with QoS enforcement (v2) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-IFQOS2-MIB