HH3C-EPON-MIB

All MIBs › HH3C-EPON-MIB

Organization: Hangzhou H3C Technologies Co., Ltd.

Last Updated: 2007-05-22

Category: Technology: EPON/PON, Vendor: H3C/HH3C

Description: Manages Ethernet Passive Optical Network (EPON) OLT and ONU configuration and performance on H3C systems.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-EPON-MIB?

HH3C-EPON-MIB is a Hangzhou H3C Technologies proprietary MIB (per IEEE P802.3ah/D3.0 clauses 60/64/65) managing EPON (Ethernet Passive Optical Network) port configuration and ONU auto-provisioning. Its objects cover auto-authorize flag, monitor-cycle and message-timeout/lose-number settings (with min/max bounds), an EPON-board-present flag, software-error and port-loopback alarm enables, a system-management table (per-slot mode switch, automatic mode, OAM discovery timeout, encryption no-reply timeout/update time, auto-bind status), and an auto-update table. As a configuration/status MIB it lets an administrator confirm ONU auto-authorization and monitor-cycle tuning on an H3C EPON OLT. It is deployed on H3C EPON (Ethernet Passive Optical Network) OLT equipment. Engineers can download the HH3C-EPON-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-EPON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C EPON (Ethernet Passive Optical Network) OLT equipment

Monitoring Examples

An administrator checks hh3cEponAutoAuthorize and hh3cEponMonitorCycle to confirm ONU auto-provisioning settings on an H3C EPON OLT.

What Can Be Monitored

ONU auto-provisioning and monitor-cycle configuration

Imported Objects

From HH3C-LSW-DEV-ADM-MIB

hh3cLswFrameIndex	OBJECT-TYPE
hh3cLswSlotIndex	OBJECT-TYPE

From HH3C-OID-MIB

hh3cEpon

OBJECT-IDENTITY

From IF-MIB

ifDescr	OBJECT-TYPE
ifIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using hh3cOnuInCRCErrPkts OID:

Select an H3C EPON OLT equipment (port config/ONU auto-provisioning) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hh3cOnuInCRCErrPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total number of frames received with bad CRC checksum. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cEponMibObjects	1.3.6.1.4.1.25506.2.42.1			The objects in this MIB module are used to manage and display current configuration of Ethernet Passive Optical Network (EPON) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65..
hh3cEponSysMan	1.3.6.1.4.1.25506.2.42.1.1
T/F hh3cEponAutoAuthorize	1.3.6.1.4.1.25506.2.42.1.1.1	TruthValue	read-write	This value determines whether software performs self-authorization for each Optical Network Unit(ONU) registering to the network. Setting it to false means for every ONU registering, software requires external authorization, and until it's done the ONU is not authenticated. True value means software authorizes each ONU registering to the network automatically. true - ONUs are always authorized. false - If 802.1x authorization is enable, the ONUs have to be authorized by the protocol. - If 802.1x authorization is disable, ONUs are always authorized.
I32 hh3cEponMonitorCycle	1.3.6.1.4.1.25506.2.42.1.1.2	Integer32	read-write	The cycle of alarm thresholds checking. Applying to the following types: Bit Error Rate(BER) alarm, Frame Error Rate(FER), Logical Link Identity(LLID) mismatch alarm and so on. The unit is second.
I32 hh3cEponMsgTimeOut	1.3.6.1.4.1.25506.2.42.1.1.3	Integer32	read-write	Timeout waiting for a response from Optical Line Terminal(OLT) firmware after sending it a message. The unit is millisecond.
I32 hh3cEponMsgLoseNum	1.3.6.1.4.1.25506.2.42.1.1.4	Integer32	read-write	The times of messages sending timeouts, after which OLT will reset (applying to every OLT).
T/F hh3cEponSysHasEPONBoard	1.3.6.1.4.1.25506.2.42.1.1.5	TruthValue	read-only	true(1) - At least an EPON board exists. false(2) - No EPON board exists.
T/F hh3cEponMonitorCycleEnable	1.3.6.1.4.1.25506.2.42.1.1.6	TruthValue	read-write	Stop or continue monitoring. true(1) - Continue monitoring. false(2) - Stop monitoring.
T/F hh3cEponOltSoftwareErrAlmEnable	1.3.6.1.4.1.25506.2.42.1.1.7	TruthValue	read-write	Software error alarm behavior of all active OLTs. true(1) - alarm enable. false(2) - alarm disable.
T/F hh3cEponPortLoopBackAlmEnable	1.3.6.1.4.1.25506.2.42.1.1.8	TruthValue	read-write	LoopBack alarm behavior of EPON ports. true(1) - alarm enable. false(2) - alarm disable.
I32 hh3cEponMonitorCycleMinVal	1.3.6.1.4.1.25506.2.42.1.1.9	Integer32	read-only	The lower limit of cycle which be confined to the hh3cEponMonitorCycle.
I32 hh3cEponMonitorCycleMaxVal	1.3.6.1.4.1.25506.2.42.1.1.10	Integer32	read-only	The upper limit of cycle which be confined to the hh3cEponMonitorCycle.
I32 hh3cEponMsgTimeOutMinVal	1.3.6.1.4.1.25506.2.42.1.1.11	Integer32	read-only	The lower limit of timeout which be confined to the hh3cEponMsgTimeOut.
I32 hh3cEponMsgTimeOutMaxVal	1.3.6.1.4.1.25506.2.42.1.1.12	Integer32	read-only	The upper limit of timeout which be confined to the hh3cEponMsgTimeOut.
I32 hh3cEponMsgLoseNumMinVal	1.3.6.1.4.1.25506.2.42.1.1.13	Integer32	read-only	The lower limit of time which be confined to the hh3cEponMsgLoseNum.
I32 hh3cEponMsgLoseNumMaxVal	1.3.6.1.4.1.25506.2.42.1.1.14	Integer32	read-only	The upper limit of time which be confined to the hh3cEponMsgLoseNum.
hh3cEponSysScalarGroup	1.3.6.1.4.1.25506.2.42.1.1.15
hh3cEponSysManTable	1.3.6.1.4.1.25506.2.42.1.1.16		not-accessible	This table defines system related parameters.
hh3cEponSysManEntry	1.3.6.1.4.1.25506.2.42.1.1.16.1		not-accessible	The entry of the table hh3cEponSysManTable.
I32 hh3cEponSlotIndex	1.3.6.1.4.1.25506.2.42.1.1.16.1.1	Integer32	not-accessible	Slot Index, the index of hh3cEponSysManTable.
INT hh3cEponModeSwitch	1.3.6.1.4.1.25506.2.42.1.1.16.1.2	INTEGER	read-write	cmode - epon standard mode. hmode - private mode.
INT hh3cEponAutomaticMode	1.3.6.1.4.1.25506.2.42.1.1.16.1.3	INTEGER	read-write	Automatic mode setting: when enabled - after new OLT is added, the OLT stack sets its encryption mode to 'triple churning' and configure the OLT to authorize ONU MAC addresses according to its table. enable -enable automatic mode. disable -disable automatic mode.
I32 hh3cEponOamDiscoveryTimeout	1.3.6.1.4.1.25506.2.42.1.1.16.1.4	Integer32	read-write	Time out parameter for extended OAM discovery process message, ranging from 0 to 2550, measured in 100 milliseconds.
I32 hh3cEponEncryptionNoReplyTimeOut	1.3.6.1.4.1.25506.2.42.1.1.16.1.5	Integer32	read-write	Encryption response timeout, ranging from 1 to 2550, measured in 100 milliseconds.
I32 hh3cEponEncryptionUpdateTime	1.3.6.1.4.1.25506.2.42.1.1.16.1.6	Integer32	read-write	Encryption key update timer for all ONUs on slot, indicated by hh3cEponSlotIndex, ranging from 1 to 255, measured in seconds.
INT hh3cEponAutoBindStatus	1.3.6.1.4.1.25506.2.42.1.1.16.1.7	INTEGER	read-write	enable - auto bind ONU ID when the ONU registered in the EPON system. disable - need manual bind ONU ID when the ONU registered in the EPON system.
hh3cEponAutoUpdateTable	1.3.6.1.4.1.25506.2.42.1.1.17		not-accessible	EPON auto update ONU application configuration.
hh3cEponAutoUpdateEntry	1.3.6.1.4.1.25506.2.42.1.1.17.1		not-accessible	The entry of the table hh3cEponAutoUpdateTable.
STR hh3cEponAutoUpdateFileName	1.3.6.1.4.1.25506.2.42.1.1.17.1.1	DisplayString	read-write	The name of ONU application file, the file name must be valid and include the path. It is a zero length string by default.
INT hh3cEponAutoUpdateSchedStatus	1.3.6.1.4.1.25506.2.42.1.1.17.1.2	INTEGER	read-write	The status of schedule update configuration. The hh3cEponAutoUpdateFileName must be set before enable hh3cEponAutoUpdateSchedStatus. enable - enable ONU schedule update. disable - disable ONU schedule update.
OCT hh3cEponAutoUpdateSchedTime	1.3.6.1.4.1.25506.2.42.1.1.17.1.3	OCTET STRING	read-write	The schedule update timing configuration is related to the hh3cEponAutoUpdateSchedType. auto update daily: the string format is hhmm auto update weekly: the string format is hhmmw 'w' means update weekly, it ranges from 0 to 6: 0 - Sunday. 1 - Monday. 2 - Tuesday. 3 - Wednesday. 4 - Thursday. 5 - Friday. 6 - Saturday. auto update in coming date : the string format is hhmmyyyymmdd. The configuration will take effect only if hh3cEponAutoUpdateSchedStatus is enabled.
INT hh3cEponAutoUpdateSchedType	1.3.6.1.4.1.25506.2.42.1.1.17.1.4	INTEGER	read-write	The update type of auto updating configuration. daily - update ONU application every day. weekly - update ONU application every week. comingdate - update ONU application on coming date.
INT hh3cEponAutoUpdateRealTimeStatus	1.3.6.1.4.1.25506.2.42.1.1.17.1.5	INTEGER	read-write	The status of real time update configuration. The hh3cEponAutoUpdateFileName must be set before enable hh3cEponAutoUpdateRealTimeStatus. enable - enable ONU real time update. disable - disable ONU real time update.
hh3cEponOuiIndexNextTable	1.3.6.1.4.1.25506.2.42.1.1.18		not-accessible	Next OUI index table.
hh3cEponOuiIndexNextEntry	1.3.6.1.4.1.25506.2.42.1.1.18.1		not-accessible	The entry of the table hh3cEponOuiIndexNextTable.
I32 hh3cEponOuiIndexNext	1.3.6.1.4.1.25506.2.42.1.1.18.1.1	Integer32	read-only	This object contains an appropriate value to be used for hh3cEponOuiIndex when creating rows in the hh3cEponOuiTable.
hh3cEponOuiTable	1.3.6.1.4.1.25506.2.42.1.1.19		not-accessible	List of OUI and OAM supported by OLT.
hh3cEponOuiEntry	1.3.6.1.4.1.25506.2.42.1.1.19.1		not-accessible	The entry of the table hh3cEponOuiTable.
I32 hh3cEponOuiIndex	1.3.6.1.4.1.25506.2.42.1.1.19.1.1	Integer32	not-accessible	The index of this table.
OCT hh3cEponOuiValue	1.3.6.1.4.1.25506.2.42.1.1.19.1.2	OCTET STRING	read-create	OUI list supported by the extended OAM discovery process. The OUI is composed of six octets. The first six octets denote the first OUI , the second six octets denote the second OUI, and the like.
OCT hh3cEponOamVersion	1.3.6.1.4.1.25506.2.42.1.1.19.1.3	OCTET STRING	read-create	Version of OAM protocol defined by the organization denoted by OUI.
ROW hh3cEponOuiRowStatus	1.3.6.1.4.1.25506.2.42.1.1.19.1.4	RowStatus	read-create	The status of this table entry. Only active, createAndGo and the destory are supported.
hh3cEponMulticastControlTable	1.3.6.1.4.1.25506.2.42.1.1.20		not-accessible	Multicast control global configuration.
hh3cEponMulticastControlEntry	1.3.6.1.4.1.25506.2.42.1.1.20.1		not-accessible	The entry of the table hh3cEponMulticastControlTable.
I32 hh3cEponMulticastVlanId	1.3.6.1.4.1.25506.2.42.1.1.20.1.1	Integer32	not-accessible	The index of this table.
OCT hh3cEponMulticastAddressList	1.3.6.1.4.1.25506.2.42.1.1.20.1.2	OCTET STRING	read-create	The multicast address, each four octets represents a multicast address, the address section ranging from the first four octets to the second four octets, and the like.
ROW hh3cEponMulticastStatus	1.3.6.1.4.1.25506.2.42.1.1.20.1.3	RowStatus	read-create	The status of this table entry. Only active, createAndGo and the destory are supported.
hh3cEponFileName	1.3.6.1.4.1.25506.2.42.1.2
OCT hh3cEponDbaUpdateFileName	1.3.6.1.4.1.25506.2.42.1.2.1	OCTET STRING	read-write	The name of a binary file which is loaded to the OLT from an external source. Note that the filename must contain the file path.
OCT hh3cEponOnuUpdateFileName	1.3.6.1.4.1.25506.2.42.1.2.2	OCTET STRING	read-write	The filename of the ONU firmware to be updated. Note that the filename must contain the file path.
hh3cEponOltMan	1.3.6.1.4.1.25506.2.42.1.3
hh3cOltSysManTable	1.3.6.1.4.1.25506.2.42.1.3.1		not-accessible	This table defines several OLT system parameters: (1)laser on time (2)laser off time (3)whether multiple copy broadcast (4)whether discard packet (5)self test (6)self test result
hh3cOltSysManEntry	1.3.6.1.4.1.25506.2.42.1.3.1.1		not-accessible	The entry of the table hh3cOltSysManTable.
I32 hh3cOltLaserOnTime	1.3.6.1.4.1.25506.2.42.1.3.1.1.1	Integer32	read-write	The laser on time of the ONUs during the discovery process, measured in Time Quanta(TQ).
I32 hh3cOltLaserOffTime	1.3.6.1.4.1.25506.2.42.1.3.1.1.2	Integer32	read-write	The laser off time of the ONUs during the discovery process, measured in TQ.
T/F hh3cOltMultiCopyBrdCast	1.3.6.1.4.1.25506.2.42.1.3.1.1.3	TruthValue	read-write	true/false filtering of tagged multicast frames. The software avert tagged downstream frames with multicast or broadcast DA to the PON and not to the CPU, except for special multicast frames (link-constraint, IGMP control and ARP) that are passed to the CPU regardless of this feature.
T/F hh3cOltEnableDiscardPacket	1.3.6.1.4.1.25506.2.42.1.3.1.1.4	TruthValue	read-write	Forward(false)/discard(true) any frames received from unlearned source address when the inside address table of the original ONU entry reach to the limit.
INT hh3cOltSelfTest	1.3.6.1.4.1.25506.2.42.1.3.1.1.5	INTEGER	read-write	selftest(1): Test OLT to check whether it's OK.
INT hh3cOltSelfTestResult	1.3.6.1.4.1.25506.2.42.1.3.1.1.6	INTEGER	read-only	The self test result of the specific OLT. other(1): The self test result is another reason. ok(2): The self test result is OK. fail(3): The self test result is fail.
U32 hh3cOltMaxRtt	1.3.6.1.4.1.25506.2.42.1.3.1.1.7	Unsigned32	read-write	Set the max Round Trip Time of this OLT.
hh3cOltInfoTable	1.3.6.1.4.1.25506.2.42.1.3.2		not-accessible	Primary status of the specified OLT. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified OLT (hh3cOltFirmMajorVersion, hh3cOltFirmMinorVersion, hh3cOltHardMajorVersion, hh3cOltHardMinorVersion) (2)Several physical capabilities of an OLT device. (hh3cOltAgcLockTime, hh3cOltAgcCdrTime) (3)The operation(activation) status of an OLT. (hh3cOltMacAddress, hh3cOltWorkMode)
hh3cOltInfoEntry	1.3.6.1.4.1.25506.2.42.1.3.2.1		not-accessible	The entry of the table hh3cOltInfoTable.
OCT hh3cOltFirmMajorVersion	1.3.6.1.4.1.25506.2.42.1.3.2.1.1	OCTET STRING	read-only	OLT firmware major version. If the object length is zero, it means the version is unknown.
OCT hh3cOltFirmMinorVersion	1.3.6.1.4.1.25506.2.42.1.3.2.1.2	OCTET STRING	read-only	OLT firmware minor version. If the object length is zero, it means the version is unknown.
OCT hh3cOltHardMajorVersion	1.3.6.1.4.1.25506.2.42.1.3.2.1.3	OCTET STRING	read-only	OLT hardware major version. If the object length is zero, it means the version is unknown.
OCT hh3cOltHardMinorVersion	1.3.6.1.4.1.25506.2.42.1.3.2.1.4	OCTET STRING	read-only	OLT hardware minor version. If the object length is zero, it means the version is unknown.
I32 hh3cOltAgcLockTime	1.3.6.1.4.1.25506.2.42.1.3.2.1.5	Integer32	read-only	PON upstream data Automatic Gain Control(AGC) lock time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value.
I32 hh3cOltAgcCdrTime	1.3.6.1.4.1.25506.2.42.1.3.2.1.6	Integer32	read-only	PON RX signal synchronization time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value
MAC hh3cOltMacAddress	1.3.6.1.4.1.25506.2.42.1.3.2.1.7	MacAddress	read-only	OLT MAC address.
INT hh3cOltWorkMode	1.3.6.1.4.1.25506.2.42.1.3.2.1.8	INTEGER	read-only	The operation(activation) modes of an OLT. other(1) - The OLT is in another mode. open(2) - The OLT is open. reset(3) - The OLT is reset. closed(4) - The OLT is closed.
I32 hh3cOltOpticalPowerTx	1.3.6.1.4.1.25506.2.42.1.3.2.1.9	Integer32	read-only	The optical power transmitted by this OLT. It measured in 0.01 dBm unit.
I32 hh3cOltOpticalPowerRx	1.3.6.1.4.1.25506.2.42.1.3.2.1.10	Integer32	read-only	The burst optical power received by this OLT. It measured in 0.01 dBm unit.
hh3cOltDbaManTable	1.3.6.1.4.1.25506.2.42.1.3.3		not-accessible	This table defines the primary parameters of the Dynamic Bandwidth Allocation(DBA) algorithm applying to the OLT.
hh3cOltDbaManEntry	1.3.6.1.4.1.25506.2.42.1.3.3.1		not-accessible	The entry of the table hh3cOltDbaManTable.
INT hh3cOltDbaEnabledType	1.3.6.1.4.1.25506.2.42.1.3.3.1.1	INTEGER	read-write	Enable different types of the DBA algorithm. Start upstream dynamic bandwidth allocation algorithm, replacing former bandwidth allocation mechanism. internal(1) - OLT internal Service Level Agreement(SLA) based algorithm, always being activated. external(2) - DBA algorithm in a binary file which is loaded to the OLT from an external source.
I32 hh3cOltDbaDiscoveryLength	1.3.6.1.4.1.25506.2.42.1.3.3.1.2	Integer32	read-write	Discovery length in TQ units.
I32 hh3cOltDbaDiscovryFrequency	1.3.6.1.4.1.25506.2.42.1.3.3.1.3	Integer32	read-write	How often should the OLT send discovery frames to the ONUs, measured in grant cycles.
I32 hh3cOltDbaCycleLength	1.3.6.1.4.1.25506.2.42.1.3.3.1.4	Integer32	read-write	The grant cycle length in TQ units.
OCT hh3cOltDbaVersion	1.3.6.1.4.1.25506.2.42.1.3.3.1.5	OCTET STRING	read-only	DBA version of the OLT.
INT hh3cOltDbaUpdate	1.3.6.1.4.1.25506.2.42.1.3.3.1.6	INTEGER	read-write	Update(1): Update the DBA algorithm with a binary file which is loaded to the OLT from an external source(flash). Config the MIB object module hh3cEponDbaUpdateFileName.
INT hh3cOltDbaUpdateResult	1.3.6.1.4.1.25506.2.42.1.3.3.1.7	INTEGER	read-only	The latest DBA update result. other: The DBA update result is another reason. ok: The DBA update result is OK. fail: The DBA update result is fail. fileNotExist: The DBA update failed because the file does not exist. notSetFilename: The DBA filename is not set.
hh3cOltPortAlarmThresholdTable	1.3.6.1.4.1.25506.2.42.1.3.4		not-accessible	The table defines the alarm threshold of OLT.
hh3cOltPortAlarmThresholdEntry	1.3.6.1.4.1.25506.2.42.1.3.4.1		not-accessible	The entry of the table hh3cOltPortAlarmThresholdTable.
T/F hh3cOltPortAlarmBerEnabled	1.3.6.1.4.1.25506.2.42.1.3.4.1.1	TruthValue	read-write	Behavior of BER alarm. true(1) - alarm enable. false(2) - alarm disable.
INT hh3cOltPortAlarmBerDirect	1.3.6.1.4.1.25506.2.42.1.3.4.1.2	INTEGER	read-write	Traffic direction to monitor for BER alarm.
I32 hh3cOltPortAlarmBerThreshold	1.3.6.1.4.1.25506.2.42.1.3.4.1.3	Integer32	read-write	BER threshold exceed which the alarm is raised.
T/F hh3cOltPortAlarmFerEnabled	1.3.6.1.4.1.25506.2.42.1.3.4.1.4	TruthValue	read-write	Behavior of FER alarm. true(1) - alarm enable. false(2) - alarm disable.
INT hh3cOltPortAlarmFerDirect	1.3.6.1.4.1.25506.2.42.1.3.4.1.5	INTEGER	read-write	Traffic direction to monitor for FER alarm.
I32 hh3cOltPortAlarmFerThreshold	1.3.6.1.4.1.25506.2.42.1.3.4.1.6	Integer32	read-write	Frame error rate exceed threshold then the alarm is raised.
T/F hh3cOltPortAlarmLlidMismatchEnabled	1.3.6.1.4.1.25506.2.42.1.3.4.1.7	TruthValue	read-write	Behavior of LLID mismatch alarm. true(1) - alarm enable. false(2) - alarm disable.
I32 hh3cOltPortAlarmLlidMismatchThreshold	1.3.6.1.4.1.25506.2.42.1.3.4.1.8	Integer32	read-write	The minimal number of mismatched frames exceed threshold then LLID mismatch alarm is raised.
T/F hh3cOltPortAlarmRemoteStableEnabled	1.3.6.1.4.1.25506.2.42.1.3.4.1.9	TruthValue	read-write	Behavior of remote stable alarm. true(1) - alarm enable. false(2) - alarm disable.
T/F hh3cOltPortAlarmLocalStableEnabled	1.3.6.1.4.1.25506.2.42.1.3.4.1.10	TruthValue	read-write	Behavior of local stable alarm. true(1) - alarm enable. false(2) - alarm disable.
T/F hh3cOltPortAlarmRegistrationEnabled	1.3.6.1.4.1.25506.2.42.1.3.4.1.11	TruthValue	read-write	Behavior of registration alarm. true(1) - alarm enable. false(2) - alarm disable.
T/F hh3cOltPortAlarmOamDisconnectionEnabled	1.3.6.1.4.1.25506.2.42.1.3.4.1.12	TruthValue	read-write	Behavior of Operations Administration and Maintenance(OAM) disconnection alarm. true(1) - alarm enable. false(2) - alarm disable.
T/F hh3cOltPortAlarmEncryptionKeyEnabled	1.3.6.1.4.1.25506.2.42.1.3.4.1.13	TruthValue	read-write	Behavior of encryption bad key alarm. true(1) - alarm enable. false(2) - alarm disable.
T/F hh3cOltPortAlarmVendorSpecificEnabled	1.3.6.1.4.1.25506.2.42.1.3.4.1.14	TruthValue	read-write	Behavior of vendor specific alarm. true(1) - alarm enable. false(2) - alarm disable.
T/F hh3cOltPortAlarmRegExcessEnabled	1.3.6.1.4.1.25506.2.42.1.3.4.1.15	TruthValue	read-write	Behavior of ONU registering over limitation alarm. true(1) - alarm enable. false(2) - alarm disable.
T/F hh3cOltPortAlarmDFEEnabled	1.3.6.1.4.1.25506.2.42.1.3.4.1.16	TruthValue	read-write	Behavior of device fatal error alarm. true - alarm enable. false - alarm disable.
I32 hh3cOltLaserOnTimeMinVal	1.3.6.1.4.1.25506.2.42.1.3.5	Integer32	read-only	The lower limit of time which is confined to hh3cOltLaserOnTime.
I32 hh3cOltLaserOnTimeMaxVal	1.3.6.1.4.1.25506.2.42.1.3.6	Integer32	read-only	The upper limit of time which is confined to hh3cOltLaserOnTime.
I32 hh3cOltLaserOffTimeMinVal	1.3.6.1.4.1.25506.2.42.1.3.7	Integer32	read-only	The lower limit of time which is confined to hh3cOltLaserOffTime.
I32 hh3cOltLaserOffTimeMaxVal	1.3.6.1.4.1.25506.2.42.1.3.8	Integer32	read-only	The upper limit of time which is confined to hh3cOltLaserOffTime.
I32 hh3cOltDbaDiscoveryLengthMinVal	1.3.6.1.4.1.25506.2.42.1.3.9	Integer32	read-only	The lower limit of the discovery length which is confined to hh3cOltDbaDiscoveryLength.
I32 hh3cOltDbaDiscoveryLengthMaxVal	1.3.6.1.4.1.25506.2.42.1.3.10	Integer32	read-only	The upper limit of the discovery length which is confined to hh3cOltDbaDiscoveryLength.
I32 hh3cOltDbaDiscovryFrequencyMinVal	1.3.6.1.4.1.25506.2.42.1.3.11	Integer32	read-only	The lower limit of the discovery length which is confined to hh3cOltDbaDiscovryFrequency.
I32 hh3cOltDbaDiscovryFrequencyMaxVal	1.3.6.1.4.1.25506.2.42.1.3.12	Integer32	read-only	The upper limit of the discovery length which is confined to hh3cOltDbaDiscovryFrequency.
I32 hh3cOltDbaCycleLengthMinVal	1.3.6.1.4.1.25506.2.42.1.3.13	Integer32	read-only	The lower limit of the frames which is confined to hh3cOltDbaCycleLength.
I32 hh3cOltDbaCycleLengthMaxVal	1.3.6.1.4.1.25506.2.42.1.3.14	Integer32	read-only	The upper limit of the frames which is confined to hh3cOltDbaCycleLength.
I32 hh3cOltPortAlarmLlidMisMinVal	1.3.6.1.4.1.25506.2.42.1.3.15	Integer32	read-only	The lower limit of the frames which is confined to hh3cOltPortAlarmLlidMismatchThreshold.
I32 hh3cOltPortAlarmLlidMisMaxVal	1.3.6.1.4.1.25506.2.42.1.3.16	Integer32	read-only	The upper limit of the frames which is confined to hh3cOltPortAlarmLlidMismatchThreshold.
I32 hh3cOltPortAlarmBerMinVal	1.3.6.1.4.1.25506.2.42.1.3.17	Integer32	read-only	The lower limit of threshold which is confined to hh3cOltPortAlarmBerThreshold.
I32 hh3cOltPortAlarmBerMaxVal	1.3.6.1.4.1.25506.2.42.1.3.18	Integer32	read-only	The upper limit of threshold which is confined to hh3cOltPortAlarmBerThreshold.
I32 hh3cOltPortAlarmFerMinVal	1.3.6.1.4.1.25506.2.42.1.3.19	Integer32	read-only	The lower limit of threshold which is confined to hh3cOltPortAlarmFerThreshold.
I32 hh3cOltPortAlarmFerMaxVal	1.3.6.1.4.1.25506.2.42.1.3.20	Integer32	read-only	The upper limit of threshold which is confined to hh3cOltPortAlarmFerThreshold.
hh3cOnuSilentTable	1.3.6.1.4.1.25506.2.42.1.3.21		not-accessible	This table is used for getting silent ONU information of OLT.
hh3cOnuSilentEntry	1.3.6.1.4.1.25506.2.42.1.3.21.1		not-accessible	The entry of the table hh3cOnuSilentTable.
MAC hh3cOnuSilentMacAddr	1.3.6.1.4.1.25506.2.42.1.3.21.1.1	MacAddress	not-accessible	The MAC address of silent ONUs in OLT.
I32 hh3cOnuSilentTime	1.3.6.1.4.1.25506.2.42.1.3.21.1.2	Integer32	read-only	The aging time of a silent ONU.
hh3cOltUsingOnuTable	1.3.6.1.4.1.25506.2.42.1.3.22		not-accessible	The table containing configurations to manage ONU interface(s) based on OLT interface.
hh3cOltUsingOnuEntry	1.3.6.1.4.1.25506.2.42.1.3.22.1		not-accessible	The entry of the table hh3cOltUsingOnuTable.
I32 hh3cOltUsingOnuNum	1.3.6.1.4.1.25506.2.42.1.3.22.1.1	Integer32	not-accessible	The ONU interface number. This value is used to specify the ONU interface which the user wants to configure for an OLT interface.
I32 hh3cOltUsingOnuIfIndex	1.3.6.1.4.1.25506.2.42.1.3.22.1.2	Integer32	read-only	The ifIndex of the ONU interface.
ROW hh3cOltUsingOnuRowStatus	1.3.6.1.4.1.25506.2.42.1.3.22.1.3	RowStatus	read-create	This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation.
hh3cEponOnuMan	1.3.6.1.4.1.25506.2.42.1.5
hh3cOnuSysManTable	1.3.6.1.4.1.25506.2.42.1.5.1		not-accessible	This table implements the following functions for ONUs: 1. Encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). 2. Restart a process of ONU authentication, using the OLT (IEEE 802.1x) authenticator.
hh3cOnuSysManEntry	1.3.6.1.4.1.25506.2.42.1.5.1.1		not-accessible	The entry of the table hh3cOnuSysManTable.
INT hh3cOnuEncryptMan	1.3.6.1.4.1.25506.2.42.1.5.1.1.1	INTEGER	read-write	Start encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). ONU registration encryption key is used as an initial value. If the encryption key was updated after ONU registration, the last updated key is used. off(1): - Stop encrypting. downlink(2): - Start encrypting all downstream directions traffic. updownlink(3): - Start encrypting all downstream/upstream directions traffic.
INT hh3cOnuReAuthorize	1.3.6.1.4.1.25506.2.42.1.5.1.1.2	INTEGER	read-write	Restart a process of ONU authentication. If 802.1x authentication is enabled, the OLT (IEEE 802.1x) authenticator is applied. Otherwise, use the default authentication. Until the reauthentication succeeds, the ONU remains its previous authorization mode. The reauthentication process includes a new authentication request sent to the authentication server.
T/F hh3cOnuMulticastFilterStatus	1.3.6.1.4.1.25506.2.42.1.5.1.1.3	TruthValue	read-write	true(1) - Multicast-Filter enable on ONU. false(2) - Multicast-Filter disable on ONU.
I32 hh3cOnuDbaReportQueueSetNumber	1.3.6.1.4.1.25506.2.42.1.5.1.1.4	Integer32	read-write	The number of queue sets reported in MPCP report frames.
INT hh3cOnuRemoteFecStatus	1.3.6.1.4.1.25506.2.42.1.5.1.1.5	INTEGER	read-write	Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction see [802.3ah] clause 65.2. enable - enable remote forward error correction. disable - disable remote forward error correction.
INT hh3cOnuPortBerStatus	1.3.6.1.4.1.25506.2.42.1.5.1.1.6	INTEGER	read-write	enable - enable ONU port bit error rate alarm. disable - disable ONU port bit error rate alarm.
INT hh3cOnuReset	1.3.6.1.4.1.25506.2.42.1.5.1.1.7	INTEGER	read-write	Reboot ONU.
INT hh3cOnuMulticastControlMode	1.3.6.1.4.1.25506.2.42.1.5.1.1.8	INTEGER	read-write	igmpsnooping - the traditional IGMP snooping mode. multicastcontrol - the specific multicast control mode.
I32 hh3cOnuAccessVlan	1.3.6.1.4.1.25506.2.42.1.5.1.1.9	Integer32	read-write	The VLAN ID assigned to untagged frames received on ONU.
STR hh3cOnuEncryptKey	1.3.6.1.4.1.25506.2.42.1.5.1.1.10	DisplayString	read-write	The encryption key, used to encrypt all downstream traffic destined to and/or upstream traffic originating from a specific ONU. It is a zero length, or MD5 hashed string, by default, the string is empty.
T/F hh3cOnuUniUpDownTrapStatus	1.3.6.1.4.1.25506.2.42.1.5.1.1.11	TruthValue	read-write	true - A notification will be sent when UNI link status is change. false - Device will not sent notification when UNI link status is change.
INT hh3cOnuFecStatus	1.3.6.1.4.1.25506.2.42.1.5.1.1.12	INTEGER	read-write	Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction (include remote onu and local OLT) see [802.3ah] clause 65.2 enable - enable forward error correction. disable - disable forward error correction.
I32 hh3cOnuMcastCtrlHostAgingTime	1.3.6.1.4.1.25506.2.42.1.5.1.1.13	Integer32	read-write	The host aging time of multicast control mode on ONU, ranging from 200 to 1000, measured in seconds.
T/F hh3cOnuMulticastFastLeaveEnable	1.3.6.1.4.1.25506.2.42.1.5.1.1.14	TruthValue	read-write	true(1) - Enable multicast fast leave attribute on all ethernet UNIs of the ONU. false(2) - Disable multicast fast leave attribute on all ethernet UNIs of the ONU.
T/F hh3cOnuPortIsolateEnable	1.3.6.1.4.1.25506.2.42.1.5.1.1.15	TruthValue	read-write	true(1) - Enable port isolate setting on all ethernet UNIs of the ONU. false(2) - Disable port isolate setting on all ethernet UNIs of the ONU.
hh3cOnuLinkTestTable	1.3.6.1.4.1.25506.2.42.1.5.2		not-accessible	LLID link test applying to the ONU only including delay measurement option. The command tests a link to a single LLID over a period of time or once, using a variable number of measurement frames. The length of the measurement frames is also parameterized. The test uses a loopback mode of the ONU to return each measurement frame, loopback activation is done using randomly patterned OAM Protocol Data Unit(PDU) frames.
hh3cOnuLinkTestEntry	1.3.6.1.4.1.25506.2.42.1.5.2.1		not-accessible	The entry of hh3cOnuLinkTestEntry.
I32 hh3cOnuLinkTestFrameNum	1.3.6.1.4.1.25506.2.42.1.5.2.1.1	Integer32	read-write	Exact number of measurement frames.
I32 hh3cOnuLinkTestFrameSize	1.3.6.1.4.1.25506.2.42.1.5.2.1.2	Integer32	read-write	Measurement frames data size, measured in bytes. Not including Preamble, SFD, VLAN tag, and FCS. Frame size minimum value is 56 - if VLAN tag is enabled('VLAN enable' field is set to ENABLE), and 60 - if VLAN tag is disabled. The actual measurement frames sent to the PON are always minimum 60 bytes long. When VLAN tag is enabled, the actual measurement frames size including FCS may reach (1514+4+4=)1522 bytes. 60(60 is VLAN tag disabled) - 1514 .
T/F hh3cOnuLinkTestDelay	1.3.6.1.4.1.25506.2.42.1.5.2.1.3	TruthValue	read-write	true:Link test includes delay measurement, which corresponds to the difference between sent and received times(including granting delay and firmware processing time overheads). false:Link test not includes a delay measurement.
T/F hh3cOnuLinkTestVlanTag	1.3.6.1.4.1.25506.2.42.1.5.2.1.4	TruthValue	read-write	true:Enable VLAN tag in link test frames. false:Link test not includes frames with VLAN tag.
I32 hh3cOnuLinkTestVlanPriority	1.3.6.1.4.1.25506.2.42.1.5.2.1.5	Integer32	read-write	VLAN priority: 0-7.
I32 hh3cOnuLinkTestVlanTagID	1.3.6.1.4.1.25506.2.42.1.5.2.1.6	Integer32	read-write	VLAN ID: 1-4094.
I32 hh3cOnuLinkTestResultSentFrameNum	1.3.6.1.4.1.25506.2.42.1.5.2.1.7	Integer32	read-only	The total number of frames sent during the link test process.
I32 hh3cOnuLinkTestResultRetFrameNum	1.3.6.1.4.1.25506.2.42.1.5.2.1.8	Integer32	read-only	The total number of frames return back during the link test process.
I32 hh3cOnuLinkTestResultRetErrFrameNum	1.3.6.1.4.1.25506.2.42.1.5.2.1.9	Integer32	read-only	The total number of error frames return back during the link test process.
I32 hh3cOnuLinkTestResultMinDelay	1.3.6.1.4.1.25506.2.42.1.5.2.1.10	Integer32	read-only	The minimum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hh3cOnuLinkTestDelay' is set to be true.
I32 hh3cOnuLinkTestResultMeanDelay	1.3.6.1.4.1.25506.2.42.1.5.2.1.11	Integer32	read-only	The average delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hh3cOnuLinkTestDelay' is set to be true.
I32 hh3cOnuLinkTestResultMaxDelay	1.3.6.1.4.1.25506.2.42.1.5.2.1.12	Integer32	read-only	The maximum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hh3cOnuLinkTestDelay' is set to be true.
hh3cOnuBandWidthTable	1.3.6.1.4.1.25506.2.42.1.5.3		not-accessible	Set bandwidth policy parameters(restrictions)for a LLID (only for the ONU). Default policies are set to disable. Policy parameters will be erased upon LLID network disconnection.
hh3cOnuBandWidthEntry	1.3.6.1.4.1.25506.2.42.1.5.3.1		not-accessible	The entry of table hh3cOnuBandWidthTable.
T/F hh3cOnuDownStreamBandWidthPolicy	1.3.6.1.4.1.25506.2.42.1.5.3.1.1	TruthValue	read-write	true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.
I32 hh3cOnuDownStreamMaxBandWidth	1.3.6.1.4.1.25506.2.42.1.5.3.1.2	Integer32	read-write	Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.
I32 hh3cOnuDownStreamMaxBurstSize	1.3.6.1.4.1.25506.2.42.1.5.3.1.3	Integer32	read-write	Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.
T/F hh3cOnuDownStreamHighPriorityFirst	1.3.6.1.4.1.25506.2.42.1.5.3.1.4	TruthValue	read-write	true:Enable high priority frames preference. false:Disable high priority frames preference.
T/F hh3cOnuDownStreamShortFrameFirst	1.3.6.1.4.1.25506.2.42.1.5.3.1.5	TruthValue	read-write	true:Enable short frames preference. false:Disable short frames preference.
T/F hh3cOnuP2PBandWidthPolicy	1.3.6.1.4.1.25506.2.42.1.5.3.1.6	TruthValue	read-write	true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.
I32 hh3cOnuP2PMaxBandWidth	1.3.6.1.4.1.25506.2.42.1.5.3.1.7	Integer32	read-write	Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.
I32 hh3cOnuP2PMaxBurstSize	1.3.6.1.4.1.25506.2.42.1.5.3.1.8	Integer32	read-write	Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.
T/F hh3cOnuP2PHighPriorityFirst	1.3.6.1.4.1.25506.2.42.1.5.3.1.9	TruthValue	read-write	true:Enable high priority frames preference. false:Disable high priority frames preference.
T/F hh3cOnuP2PShortFrameFirst	1.3.6.1.4.1.25506.2.42.1.5.3.1.10	TruthValue	read-write	true:Enable short frames preference. false:Disable short frames preference.
hh3cOnuSlaManTable	1.3.6.1.4.1.25506.2.42.1.5.4		not-accessible	Two types of DBA algorithm are supported in the ONU. The internal SLA based algorithm is always activated. This table defines the primary parameter about the internal SLA algorithm.
hh3cOnuSlaManEntry	1.3.6.1.4.1.25506.2.42.1.5.4.1		not-accessible	The entry of table hh3cOnuSlaManTable.
I32 hh3cOnuSlaMaxBandWidth	1.3.6.1.4.1.25506.2.42.1.5.4.1.1	Integer32	read-write	Maximum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hh3cOnuSlaBandWidthStepVal. The minimum bandwidth should not be larger than the maximum bandwidth.
I32 hh3cOnuSlaMinBandWidth	1.3.6.1.4.1.25506.2.42.1.5.4.1.2	Integer32	read-write	Minimum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hh3cOnuSlaBandWidthStepVal. The maximum bandwidth should be larger than the minimum bandwidth.
I32 hh3cOnuSlaBandWidthStepVal	1.3.6.1.4.1.25506.2.42.1.5.4.1.3	Integer32	read-only	Granularity of bandwidth - measured in Kbit/s. The value of hh3cOnuSlaMaxBandWidth and hh3cOnuSlaMinBandWidth should be the multiple of the value of this object.
INT hh3cOnuSlaDelay	1.3.6.1.4.1.25506.2.42.1.5.4.1.4	INTEGER	read-write	low - low delay. high - high delay. The delay constraint of a specific ONU. Set to high may improve the bandwidth usage at the cost of delay.
I32 hh3cOnuSlaFixedBandWidth	1.3.6.1.4.1.25506.2.42.1.5.4.1.5	Integer32	read-write	Fixed bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hh3cOnuSlaBandWidthStepVal.
I32 hh3cOnuSlaPriorityClass	1.3.6.1.4.1.25506.2.42.1.5.4.1.6	Integer32	read-write	Precedence of this flow over others in case of contention. 0 is the lowest priority and 7 is the highest priority.
I32 hh3cOnuSlaFixedPacketSize	1.3.6.1.4.1.25506.2.42.1.5.4.1.7	Integer32	read-write	Fixed packet size - measured in byte. The value of this object should be valid when hh3cOnuSlaFixedBandWidth is configured.
hh3cOnuInfoTable	1.3.6.1.4.1.25506.2.42.1.5.5		not-accessible	Primary status of the specified ONU. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified ONU (hh3cOnuHardMajorVersion, hh3cOnuHardMinorVersion, hh3cOnuUniMacType) (2)Several physical capabilities of the ONU. (hh3cOnuLaserOnTime, hh3cOnuLaserOffTime, hh3cOnuGrantFifoDep.) (3)The operation(activation) status of the ONU. (hh3cOnuWorkMode)
hh3cOnuInfoEntry	1.3.6.1.4.1.25506.2.42.1.5.5.1		not-accessible	The entry of the hh3cOnuInfoTable.
OCT hh3cOnuHardMajorVersion	1.3.6.1.4.1.25506.2.42.1.5.5.1.1	OCTET STRING	read-only	ONU hardware major version. If the object length is zero, it means the version is unknown.
OCT hh3cOnuHardMinorVersion	1.3.6.1.4.1.25506.2.42.1.5.5.1.2	OCTET STRING	read-only	ONU hardware minor version. If the object length is zero, it means the version is unknown.
OCT hh3cOnuSoftwareVersion	1.3.6.1.4.1.25506.2.42.1.5.5.1.3	OCTET STRING	read-only	ONU software version.
INT hh3cOnuUniMacType	1.3.6.1.4.1.25506.2.42.1.5.5.1.4	INTEGER	read-only	ONU User Network Interface(UNI) port MAC type.
I32 hh3cOnuLaserOnTime	1.3.6.1.4.1.25506.2.42.1.5.5.1.5	Integer32	read-only	The ONU laser on time measured in TQ units. If the object value is 0x7FFFFFFF, it means hh3cOnuLaserOnTime is unknown.
I32 hh3cOnuLaserOffTime	1.3.6.1.4.1.25506.2.42.1.5.5.1.6	Integer32	read-only	The ONU laser off time measured in TQ units. If the object value is 0x7FFFFFFF, it means hh3cOnuLaserOffTime is unknown.
I32 hh3cOnuGrantFifoDep	1.3.6.1.4.1.25506.2.42.1.5.5.1.7	Integer32	read-only	Maximal number of grant records an ONU can store, relevant to ONU only. range: 1 - 255. 0x7FFFFFFF: unknown value.
INT hh3cOnuWorkMode	1.3.6.1.4.1.25506.2.42.1.5.5.1.8	INTEGER	read-only	The operation(activation) mode of an ONU. other(1) - ONU is in another mode. on(2) - ONU is registered and authorized to the network. In this mode it works as a media converter. pending(3) - ONU has been registered to the PON, but not authorized to the network. off(4) - ONU is not registered to the network.
OCT hh3cOnuPCBVersion	1.3.6.1.4.1.25506.2.42.1.5.5.1.9	OCTET STRING	read-only	ONU PCB version.
U32 hh3cOnuRtt	1.3.6.1.4.1.25506.2.42.1.5.5.1.10	Unsigned32	read-only	The signal round-trip-time(RTT) received.
OCT hh3cOnuEEPROMVersion	1.3.6.1.4.1.25506.2.42.1.5.5.1.11	OCTET STRING	read-only	ONU EEPROM version.
OCT hh3cOnuRegType	1.3.6.1.4.1.25506.2.42.1.5.5.1.12	OCTET STRING	read-only	ONU registered type.
OCT hh3cOnuHostType	1.3.6.1.4.1.25506.2.42.1.5.5.1.13	OCTET STRING	read-only	ONU host type.
I32 hh3cOnuDistance	1.3.6.1.4.1.25506.2.42.1.5.5.1.14	Integer32	read-only	The distance between OLT and ONU, measured in meter.
I32 hh3cOnuLlid	1.3.6.1.4.1.25506.2.42.1.5.5.1.15	Integer32	read-only	The link layer identifier, which uniquely identifies the ONU of a specific OLT.
OCT hh3cOnuVendorId	1.3.6.1.4.1.25506.2.42.1.5.5.1.16	OCTET STRING	read-only	ONU vendor ID.
OCT hh3cOnuFirmwareVersion	1.3.6.1.4.1.25506.2.42.1.5.5.1.17	OCTET STRING	read-only	ONU firmware version.
I32 hh3cOnuOpticalPowerReceivedByOlt	1.3.6.1.4.1.25506.2.42.1.5.5.1.18	Integer32	read-only	The burst ONU optical power received by OLT, and when the ONU status is up the value is usable. It measured in 0.01 dBm unit.
hh3cOnuMacAddrInfoTable	1.3.6.1.4.1.25506.2.42.1.5.6		not-accessible	This table used for getting MAC address information of ONU.
hh3cOnuMacAddrInfoEntry	1.3.6.1.4.1.25506.2.42.1.5.6.1		not-accessible	The entry of the hh3cEponOnuMacAddrInfoTable.
I32 hh3cOnuMacIndex	1.3.6.1.4.1.25506.2.42.1.5.6.1.1	Integer32	not-accessible	The index of ONUs in one OLT.
INT hh3cOnuMacAddrFlag	1.3.6.1.4.1.25506.2.42.1.5.6.1.2	INTEGER	read-only	The flag of ONU status. 1 - bound:The ONU is bound but not registered. 2 - registered:The ONU is registered but not bound. 3 - run:The ONU is registered and bound on one OLT. 4 - regIncorrect:The ONU is bound on one OLT and registered on another OLT.
MAC hh3cOnuMacAddress	1.3.6.1.4.1.25506.2.42.1.5.6.1.3	MacAddress	read-only	The MAC address of ONU.
hh3cOnuBindMacAddrTable	1.3.6.1.4.1.25506.2.42.1.5.7		not-accessible	This table implements the following functions for ONUs: Bind MAC of ONU.
hh3cOnuBindMacAddrEntry	1.3.6.1.4.1.25506.2.42.1.5.7.1		not-accessible	The entry of the table hh3cOnuBindMacAddrTable.
MAC hh3cOnuBindMacAddress	1.3.6.1.4.1.25506.2.42.1.5.7.1.1	MacAddress	read-write	Bind the MAC of ONU. While the MAC is not bound, the ONU can not go into effect and configurations can not be set. Set 0-0-0 (MAC address) to the EPON device port will unbind the relationship with the original MAC and configurations will be set to default values.
I32 hh3cOnuBindType	1.3.6.1.4.1.25506.2.42.1.5.7.1.2	Integer32	read-write	Set the binding type with the ONU which is confined to the index of hh3cEponOnuTypeDescr.
hh3cOnuFirmwareUpdateTable	1.3.6.1.4.1.25506.2.42.1.5.8		not-accessible	This table implements the following functions for ONUs: 1. Update the ONU firmware. 2. Result of update ONU firmware.
hh3cOnuFirmwareUpdateEntry	1.3.6.1.4.1.25506.2.42.1.5.8.1		not-accessible	The entry of the table hh3cOnuFirmwareUpdateTable.
INT hh3cOnuUpdate	1.3.6.1.4.1.25506.2.42.1.5.8.1.1	INTEGER	read-write	update(1): Update the ONU firmware. Config the MIB object module hh3cEponOnuUpdateFileName with the filename of ONU firmware first.
INT hh3cOnuUpdateResult	1.3.6.1.4.1.25506.2.42.1.5.8.1.2	INTEGER	read-only	The ONU firmware update result. updating - The ONU is updating firmware right now. ok - The ONU update result is OK. fail - The ONU update result is fail. fileNotExist - The ONU update failed because the file does not exist. notSetFilename - The ONU firmware filename is not set. fileNotMatchONU - The ONU firmware does not match the ONU. timeout - The ONU responses timeout. otherError - The ONU update result is unknown.
OCT hh3cOnuUpdateFileName	1.3.6.1.4.1.25506.2.42.1.5.8.1.3	OCTET STRING	read-write	The filename of the ONU firmware to be updated. Note that the filename must contain the file path.
I32 hh3cOnuLinkTestFrameNumMinVal	1.3.6.1.4.1.25506.2.42.1.5.9	Integer32	read-only	The lower limit of measurement frames which is confined to hh3cOnuLinkTestFrameNum.
I32 hh3cOnuLinkTestFrameNumMaxVal	1.3.6.1.4.1.25506.2.42.1.5.10	Integer32	read-only	The upper limit of measurement frames which is confined to hh3cOnuLinkTestFrameNum.
I32 hh3cOnuSlaMaxBandWidthMinVal	1.3.6.1.4.1.25506.2.42.1.5.11	Integer32	read-only	The lower limit of maximum-bandwidth which is confined to hh3cOnuSlaMaxBandWidth.
I32 hh3cOnuSlaMaxBandWidthMaxVal	1.3.6.1.4.1.25506.2.42.1.5.12	Integer32	read-only	The upper limit of maximum-bandwidth which is confined to hh3cOnuSlaMaxBandWidth.
I32 hh3cOnuSlaMinBandWidthMinVal	1.3.6.1.4.1.25506.2.42.1.5.13	Integer32	read-only	The lower limit of minimum-bandwidth which is confined to hh3cOnuSlaMinBandWidth.
I32 hh3cOnuSlaMinBandWidthMaxVal	1.3.6.1.4.1.25506.2.42.1.5.14	Integer32	read-only	The upper limit of minimum-bandwidth which is confined to hh3cOnuSlaMinBandWidth.
hh3cEponOnuTypeManTable	1.3.6.1.4.1.25506.2.42.1.5.15		not-accessible	This table is used for getting ONU bind type in current version.
hh3cEponOnuTypeManEntry	1.3.6.1.4.1.25506.2.42.1.5.15.1		not-accessible	The entry of the hh3cEponOnuTypeManTable.
I32 hh3cEponOnuTypeIndex	1.3.6.1.4.1.25506.2.42.1.5.15.1.1	Integer32	not-accessible	The ONU type index.
OCT hh3cEponOnuTypeDescr	1.3.6.1.4.1.25506.2.42.1.5.15.1.2	OCTET STRING	read-only	The ONU type description which can be used to bind ONU in current version. the value of hh3cOnuBindType can be configured by the index of hh3cEponOnuTypeDescr.
hh3cOnuPacketManTable	1.3.6.1.4.1.25506.2.42.1.5.16		not-accessible	This table implements the following functions: (1)Manage packet priority trust mode. (2)Manage packet queue-scheduler mode.
hh3cOnuPacketManEntry	1.3.6.1.4.1.25506.2.42.1.5.16.1		not-accessible	The entry of the hh3cOnuPacketManTable.
INT hh3cOnuPriorityTrust	1.3.6.1.4.1.25506.2.42.1.5.16.1.1	INTEGER	read-write	The QOS mode which is assigned on ONU. dscp - The service dscp of politic Priority. ipprecedence - The service IP precedence of politic Priority. cos - The service cos of politic Priority.
INT hh3cOnuQueueScheduler	1.3.6.1.4.1.25506.2.42.1.5.16.1.2	INTEGER	read-write	The packet queue-scheduler mode which is assigned on ONU. spq - strict priority queuing. wfq - specifies the weights for weighted round-robin queuing.
hh3cOnuProtocolTable	1.3.6.1.4.1.25506.2.42.1.5.17		not-accessible	This table implements the following functions: (1)Manage STP status. (2)Manage IGMP-snooping. (3)Manage DHCP-snooping.
hh3cOnuProtocolEntry	1.3.6.1.4.1.25506.2.42.1.5.17.1		not-accessible	The entry of hh3cOnuProtocolTable.
T/F hh3cOnuStpStatus	1.3.6.1.4.1.25506.2.42.1.5.17.1.1	TruthValue	read-write	true(1) - STP status enable on ONU. false(2) - STP status disable on ONU.
T/F hh3cOnuIgmpSnoopingStatus	1.3.6.1.4.1.25506.2.42.1.5.17.1.2	TruthValue	read-write	true(1) - IGMP snooping status enable on ONU. false(2) - IGMP snooping status disable on ONU.
T/F hh3cOnuDhcpsnoopingOption82	1.3.6.1.4.1.25506.2.42.1.5.17.1.3	TruthValue	read-write	true(1) - DHCP snooping Option 82 status enable on ONU. false(2) - DHCP snooping Option 82 status disable on ONU.
T/F hh3cOnuDhcpsnooping	1.3.6.1.4.1.25506.2.42.1.5.17.1.4	TruthValue	read-write	true(1) - DHCP snooping status enable on ONU. false(2) - DHCP snooping status disable on ONU.
T/F hh3cOnuPppoe	1.3.6.1.4.1.25506.2.42.1.5.17.1.5	TruthValue	read-write	true(1) - PPPOE status enable on ONU. false(2) - PPPOE status disable on ONU.
I32 hh3cOnuIgmpSnoopingHostAgingT	1.3.6.1.4.1.25506.2.42.1.5.17.1.6	Integer32	read-write	Set the host aging time of IGMP on ONU.
I32 hh3cOnuIgmpSnoopingMaxRespT	1.3.6.1.4.1.25506.2.42.1.5.17.1.7	Integer32	read-write	Set the max response time of IGMP on ONU.
I32 hh3cOnuIgmpSnoopingRouterAgingT	1.3.6.1.4.1.25506.2.42.1.5.17.1.8	Integer32	read-write	Set the router aging time of IGMP on ONU.
T/F hh3cOnuIgmpSnoopingAggReportS	1.3.6.1.4.1.25506.2.42.1.5.17.1.9	TruthValue	read-write	true(1) - Igmp snooping aggregation report status enable on ONU. false(2) - Igmp snooping aggregation report status disable on ONU.
T/F hh3cOnuIgmpSnoopingAggLeaveS	1.3.6.1.4.1.25506.2.42.1.5.17.1.10	TruthValue	read-write	true(1) - Igmp snooping aggregation leave status enable on ONU. false(2) - Igmp snooping aggregation leave status disable on ONU.
hh3cOnuDot1xTable	1.3.6.1.4.1.25506.2.42.1.5.18		not-accessible	This table implements the following functions: (1)Manage 802.1x account. (2)Manage 802.1x password. ONU will be authorized to send and receive frames when the account and the password are all right, otherwise this ONU will be unavailable.
hh3cOnuDot1xEntry	1.3.6.1.4.1.25506.2.42.1.5.18.1		not-accessible	The entry of the hh3cOnuDot1xTable.
OCT hh3cOnuDot1xAccount	1.3.6.1.4.1.25506.2.42.1.5.18.1.1	OCTET STRING	read-write	ONU 802.1X account. The object value cannot be set as 'a', 'al' or 'all'. The object should be set together with hh3cOnuDot1xPassword.
OCT hh3cOnuDot1xPassword	1.3.6.1.4.1.25506.2.42.1.5.18.1.2	OCTET STRING	read-write	ONU 802.1X password. The object should be set together with hh3cOnuDot1xAccount.
hh3cOnuPriorityQueueTable	1.3.6.1.4.1.25506.2.42.1.5.19		not-accessible	This table contains specific information of priority queue.
hh3cOnuPriorityQueueEntry	1.3.6.1.4.1.25506.2.42.1.5.19.1		not-accessible	The entry of hh3cOnuPriorityQueueTable.
INT hh3cOnuQueueDirection	1.3.6.1.4.1.25506.2.42.1.5.19.1.1	INTEGER	not-accessible	The direction of priority queue.
I32 hh3cOnuQueueId	1.3.6.1.4.1.25506.2.42.1.5.19.1.2	Integer32	not-accessible	The queue ID of priority queue.
I32 hh3cOnuQueueSize	1.3.6.1.4.1.25506.2.42.1.5.19.1.3	Integer32	read-write	The size of priority queue, measured in percent. The total length of all priority queues is a constant, by default, it is assigned to all of the priority queues evenly. The length of each priority queue may be changed by changing the value of hh3cOnuPriorityQueueSize. The total size of the inbound or outbound priority queues should be not more than 100.
hh3cOnuCountTable	1.3.6.1.4.1.25506.2.42.1.5.20		not-accessible	This table contains statistics of ONU port.
hh3cOnuCountEntry	1.3.6.1.4.1.25506.2.42.1.5.20.1		not-accessible	The entry of hh3cOnuCountTable.
C64 hh3cOnuInCRCErrPktsEx	1.3.6.1.4.1.25506.2.42.1.5.20.1.1	Counter64	read-only	The total number of frames received with bad CRC checksum.
C64 hh3cOnuOutDroppedFrames	1.3.6.1.4.1.25506.2.42.1.5.20.1.2	Counter64	read-only	The total number of frames dropped because of buffer failure.
hh3cEponOnuScalarGroup	1.3.6.1.4.1.25506.2.42.1.5.21
I32 hh3cOnuPriorityQueueSizeMinVal	1.3.6.1.4.1.25506.2.42.1.5.21.1	Integer32	read-only	The lower limit of queue size which is confined to hh3cOnuQueueSize.
I32 hh3cOnuPriorityQueueSizeMaxVal	1.3.6.1.4.1.25506.2.42.1.5.21.2	Integer32	read-only	The upper limit of queue size which is confined to hh3cOnuQueueSize.
I32 hh3cOnuPriorityQueueBandwidthMinVal	1.3.6.1.4.1.25506.2.42.1.5.21.3	Integer32	read-only	The lower limit of hh3cOnuQueueMaxBandwidth.
I32 hh3cOnuPriorityQueueBandwidthMaxVal	1.3.6.1.4.1.25506.2.42.1.5.21.4	Integer32	read-only	The upper limit of hh3cOnuQueueMaxBandwidth.
I32 hh3cOnuPriorityQueueBurstsizeMinVal	1.3.6.1.4.1.25506.2.42.1.5.21.5	Integer32	read-only	The lower limit of hh3cOnuQueueMaxBurstsize.
I32 hh3cOnuPriorityQueueBurstsizeMaxVal	1.3.6.1.4.1.25506.2.42.1.5.21.6	Integer32	read-only	The upper limit of hh3cOnuQueueMaxBurstsize.
I32 hh3cOnuUpdateByTypeNextIndex	1.3.6.1.4.1.25506.2.42.1.5.21.7	Integer32	read-only	Offer a free index of hh3cOnuFirmwareUpdateByTypeTable.
hh3cOnuQueueBandwidthTable	1.3.6.1.4.1.25506.2.42.1.5.22		not-accessible	This table contains specific bandwidth information of ONU priority queue.
hh3cOnuQueueBandwidthEntry	1.3.6.1.4.1.25506.2.42.1.5.22.1		not-accessible	The entry of hh3cOnuQueueBandwidthTable.
I32 hh3cOnuQueueMaxBandwidth	1.3.6.1.4.1.25506.2.42.1.5.22.1.1	Integer32	read-write	The maximum bandwidth of specific ONU priority queue, measured in 100Kbps.
I32 hh3cOnuQueueMaxBurstsize	1.3.6.1.4.1.25506.2.42.1.5.22.1.2	Integer32	read-write	The maximum burst size of specific ONU priority queue, measured in 64Bytes.
T/F hh3cOnuQueuePolicyStatus	1.3.6.1.4.1.25506.2.42.1.5.22.1.3	TruthValue	read-write	true - enable bandwidth policy false - disable bandwidth policy The bandwidth administrative status of specific ONU priority queue.
hh3cOnuIpAddressTable	1.3.6.1.4.1.25506.2.42.1.5.23		not-accessible	ONU IP address table.
hh3cOnuIpAddressEntry	1.3.6.1.4.1.25506.2.42.1.5.23.1		not-accessible	The entry of hh3cOnuIpAddressTable.
IP hh3cOnuIpAddress	1.3.6.1.4.1.25506.2.42.1.5.23.1.1	IpAddress	read-write	The IP address assigned to the ONU.
IP hh3cOnuIpAddressMask	1.3.6.1.4.1.25506.2.42.1.5.23.1.2	IpAddress	read-write	The mask of IP address denoted by hh3cOnuIpAddress.
IP hh3cOnuIpAddressGateway	1.3.6.1.4.1.25506.2.42.1.5.23.1.3	IpAddress	read-write	The gateway of IP address denoted by hh3cOnuIpAddress.
T/F hh3cOnuDhcpallocate	1.3.6.1.4.1.25506.2.42.1.5.23.1.4	TruthValue	read-write	true(1) - ONU auto allocate IP address status enable. false(2) - ONU auto allocate IP address status disable.
I32 hh3cOnuManageVID	1.3.6.1.4.1.25506.2.42.1.5.23.1.5	Integer32	read-write	The management VLAN of ONU denoted by hh3cOnuManageVID.
T/F hh3cOnuManageVlanIntfS	1.3.6.1.4.1.25506.2.42.1.5.23.1.6	TruthValue	read-write	The management interface status of ONU denoted by hh3cOnuManageVlanIntfS.
hh3cOnuChipSetInfoTable	1.3.6.1.4.1.25506.2.42.1.5.24		not-accessible	ONU vendor specific information of ONU.
hh3cOnuChipSetInfoEntry	1.3.6.1.4.1.25506.2.42.1.5.24.1		not-accessible	The entry of hh3cOnuChipSetInfoTable.
OCT hh3cOnuChipSetVendorId	1.3.6.1.4.1.25506.2.42.1.5.24.1.1	OCTET STRING	read-only	Chipset vendor ID, which identifies the ONU's PON chip vendor according JEDEC ID code.
OCT hh3cOnuChipSetModel	1.3.6.1.4.1.25506.2.42.1.5.24.1.2	OCTET STRING	read-only	Chip model, numbering(range from 0 to 0xFF) by the chip vendor.
I32 hh3cOnuChipSetRevision	1.3.6.1.4.1.25506.2.42.1.5.24.1.3	Integer32	read-only	Chip revision.
DAT hh3cOnuChipSetDesignDate	1.3.6.1.4.1.25506.2.42.1.5.24.1.4	DateAndTime	read-only	Chip design date.
hh3cOnuCapabilityTable	1.3.6.1.4.1.25506.2.42.1.5.25		not-accessible	Capability of ONU.
hh3cOnuCapabilityEntry	1.3.6.1.4.1.25506.2.42.1.5.25.1		not-accessible	The entry of the table hh3cOnuCapabilityTable.
BIT hh3cOnuServiceSupported	1.3.6.1.4.1.25506.2.42.1.5.25.1.1	Bits	read-only	Services types supported by the ONU. These functional groups can be supported independently. geinterfacesupport - supporting (1)/not supporting(0) Gbit Ethernet GE interface. feinterfacesupport - supporting (1)/not supporting(0) 100M Ethernet FE interface.(maximum rate is 100M, without GEinterface) voipservicesupport - supporting (1)/not supporting(0)VoIP service. tdmservicesupport - supporting (1)/not supporting(0)TDM CES service.
I32 hh3cOnuGEPortNumber	1.3.6.1.4.1.25506.2.42.1.5.25.1.2	Integer32	read-only	The current gigabit ethernet ports number supported by the ONU.
I32 hh3cOnuFEPortNumber	1.3.6.1.4.1.25506.2.42.1.5.25.1.3	Integer32	read-only	the current fast ethernet ports number supported by the ONU.
I32 hh3cOnuPOTSPortNumber	1.3.6.1.4.1.25506.2.42.1.5.25.1.4	Integer32	read-only	The current POTS ports number supported by the ONU
I32 hh3cOnuE1PortsNumber	1.3.6.1.4.1.25506.2.42.1.5.25.1.5	Integer32	read-only	The current E1 ports number supported by the ONU.
I32 hh3cOnuUpstreamQueueNumber	1.3.6.1.4.1.25506.2.42.1.5.25.1.6	Integer32	read-only	The number of upstream queues supported by the ONU.
I32 hh3cOnuMaxUpstreamQueuePerPort	1.3.6.1.4.1.25506.2.42.1.5.25.1.7	Integer32	read-only	The number of maximum upstream queues per port of the ONU.
I32 hh3cOnuDownstreamQueueNumber	1.3.6.1.4.1.25506.2.42.1.5.25.1.8	Integer32	read-only	The number of downstream queues supported by the ONU.
I32 hh3cOnuMaxDownstreamQueuePerPort	1.3.6.1.4.1.25506.2.42.1.5.25.1.9	Integer32	read-only	The number of maximum downstream queues per port of the ONU.
T/F hh3cOnuBatteryBackup	1.3.6.1.4.1.25506.2.42.1.5.25.1.10	TruthValue	read-only	true(1) - ONU supports a reserve battery. false(2) - ONU does not support a reserve battery.
T/F hh3cOnuIgspFastLeaveSupported	1.3.6.1.4.1.25506.2.42.1.5.25.1.11	TruthValue	read-only	true(1) - ONU supports fast leave in igsp mode. false(2) - ONU does not support fast leave in igsp mode.
T/F hh3cOnuMCtrlFastLeaveSupported	1.3.6.1.4.1.25506.2.42.1.5.25.1.12	TruthValue	read-only	true(1) - ONU supports fast leave in multicast control mode. false(2) - ONU does not support fast leave in multicast control mode.
hh3cOnuDbaReportTable	1.3.6.1.4.1.25506.2.42.1.5.26		not-accessible	This table defines the information of DBA(dynamic bandwidth allocation) report threshold contained in the MPCP report frames.
hh3cOnuDbaReportEntry	1.3.6.1.4.1.25506.2.42.1.5.26.1		not-accessible	The entry of the table hh3cOnuDbaReportTable.
I32 hh3cOnuDbaReportQueueId	1.3.6.1.4.1.25506.2.42.1.5.26.1.1	Integer32	not-accessible	The DBA report queue ID.
I32 hh3cOnuDbaReportThreshold	1.3.6.1.4.1.25506.2.42.1.5.26.1.2	Integer32	read-write	The threshold of the DBA report queue. the following is the queue ID and the related default threshold setting. 1 - 0 2 - 0 3 - 0 4 - 65535 5 - 65535 6 - 0 7 - 0 8 - 0
INT hh3cOnuDbaReportStatus	1.3.6.1.4.1.25506.2.42.1.5.26.1.3	INTEGER	read-write	enable -threshold configuration is active for the queue. disable -threshold configuration is not active for the queue.
hh3cOnuCosToLocalPrecedenceTable	1.3.6.1.4.1.25506.2.42.1.5.27		not-accessible	Table of map of the COS to local-precedence.
hh3cOnuCosToLocalPrecedenceEntry	1.3.6.1.4.1.25506.2.42.1.5.27.1		not-accessible	Configuration information of map of the COS to local precedence.
I32 hh3cOnuCosToLocalPrecedenceCosIndex	1.3.6.1.4.1.25506.2.42.1.5.27.1.1	Integer32	read-only	Index of the map, obtains from packet cos value.
I32 hh3cOnuCosToLocalPrecedenceValue	1.3.6.1.4.1.25506.2.42.1.5.27.1.2	Integer32	read-write	Value of local precedence.
hh3cEponOnuStpPortTable	1.3.6.1.4.1.25506.2.42.1.5.28		not-accessible	Table of ONU STP ports.
hh3cEponOnuStpPortEntry	1.3.6.1.4.1.25506.2.42.1.5.28.1		not-accessible	Configuration information of ONU STP ports.
I32 hh3cEponStpPortIndex	1.3.6.1.4.1.25506.2.42.1.5.28.1.1	Integer32	accessible-for-notify	The index of the STP ports.
OCT hh3cEponStpPortDescr	1.3.6.1.4.1.25506.2.42.1.5.28.1.2	OCTET STRING	accessible-for-notify	The description of the STP ports.
INT hh3cEponStpPortState	1.3.6.1.4.1.25506.2.42.1.5.28.1.3	INTEGER	accessible-for-notify	The current state of the port (i.e. disabled, discarding, learning and forwarding).
hh3cOnuPhysicalTable	1.3.6.1.4.1.25506.2.42.1.5.29		not-accessible	This table is used for getting ONU physical information.
hh3cOnuPhysicalEntry	1.3.6.1.4.1.25506.2.42.1.5.29.1		not-accessible	The entry of the hh3cOnuPhysicalTable.
MAC hh3cOnuBridgeMac	1.3.6.1.4.1.25506.2.42.1.5.29.1.1	MacAddress	read-only	The bridge MAC address of ONU.
MAC hh3cOnuFirstPonMac	1.3.6.1.4.1.25506.2.42.1.5.29.1.2	MacAddress	read-only	The MAC address of ONU first PON port.
INT hh3cOnuFirstPonRegState	1.3.6.1.4.1.25506.2.42.1.5.29.1.3	INTEGER	read-only	The register state of ONU first PON port.
MAC hh3cOnuSecondPonMac	1.3.6.1.4.1.25506.2.42.1.5.29.1.4	MacAddress	read-only	The MAC address of ONU second PON port.
INT hh3cOnuSecondPonRegState	1.3.6.1.4.1.25506.2.42.1.5.29.1.5	INTEGER	read-only	The register state of ONU second PON port.
hh3cOnuSmlkTable	1.3.6.1.4.1.25506.2.42.1.5.30		not-accessible	This table is used for getting ONU SMLK information.
hh3cOnuSmlkEntry	1.3.6.1.4.1.25506.2.42.1.5.30.1		not-accessible	The entry of the hh3cOnuSmlkTable.
I32 hh3cOnuSmlkGroupID	1.3.6.1.4.1.25506.2.42.1.5.30.1.1	Integer32	read-only	The SMLK group ID of ONU.
INT hh3cOnuSmlkFirstPonRole	1.3.6.1.4.1.25506.2.42.1.5.30.1.2	INTEGER	read-only	The role of ONU first PON port in a SMLK group.
INT hh3cOnuSmlkFirstPonStatus	1.3.6.1.4.1.25506.2.42.1.5.30.1.3	INTEGER	read-only	The transmitting status of ONU first PON port in a SMLK group.
INT hh3cOnuSmlkSecondPonRole	1.3.6.1.4.1.25506.2.42.1.5.30.1.4	INTEGER	read-only	The role of ONU second PON port in a SMLK group.
INT hh3cOnuSmlkSecondPonStatus	1.3.6.1.4.1.25506.2.42.1.5.30.1.5	INTEGER	read-only	The transmitting status of ONU second PON port in a SMLK group.
hh3cOnuRS485PropertiesTable	1.3.6.1.4.1.25506.2.42.1.5.31		not-accessible	Property table.
hh3cOnuRS485PropertiesEntry	1.3.6.1.4.1.25506.2.42.1.5.31.1		not-accessible	The entry of property table.
I32 hh3cOnuRS485SerialIndex	1.3.6.1.4.1.25506.2.42.1.5.31.1.1	Integer32	not-accessible	The index of serial port.
INT hh3cOnuRS485BaudRate	1.3.6.1.4.1.25506.2.42.1.5.31.1.2	INTEGER	read-write	The port baud rate.
INT hh3cOnuRS485DataBits	1.3.6.1.4.1.25506.2.42.1.5.31.1.3	INTEGER	read-write	The port number of data bits in a character.
INT hh3cOnuRS485Parity	1.3.6.1.4.1.25506.2.42.1.5.31.1.4	INTEGER	read-write	The port sense of a character parity bit.
INT hh3cOnuRS485StopBits	1.3.6.1.4.1.25506.2.42.1.5.31.1.5	INTEGER	read-write	The port number of stop bits.
INT hh3cOnuRS485FlowControl	1.3.6.1.4.1.25506.2.42.1.5.31.1.6	INTEGER	read-write	The port type of input flow control. 'none' indicates no flow control at this level. 'hardware' indicates using hardware signals. 'xonOrxoff' indicates using software function.
I32 hh3cOnuRS485TXOctets	1.3.6.1.4.1.25506.2.42.1.5.31.1.7	Integer32	read-only	The number of output octets about the port. The unit is byte.
I32 hh3cOnuRS485RXOctets	1.3.6.1.4.1.25506.2.42.1.5.31.1.8	Integer32	read-only	The number of input octets about the port. The unit is byte.
I32 hh3cOnuRS485TXErrOctets	1.3.6.1.4.1.25506.2.42.1.5.31.1.9	Integer32	read-only	The number of output error octets about the port. The unit is byte.
I32 hh3cOnuRS485RXErrOctets	1.3.6.1.4.1.25506.2.42.1.5.31.1.10	Integer32	read-only	The number of input error octets about the port. The unit is byte.
INT hh3cOnuRS485ResetStatistics	1.3.6.1.4.1.25506.2.42.1.5.31.1.11	INTEGER	read-write	Reset the counters to zero, including hh3cOnuRS485TXOctets, hh3cOnuRS485RXOctets, hh3cOnuRS485TXErrOctets and hh3cOnuRS485RXErrOctets.
hh3cOnuRS485SessionSummaryTable	1.3.6.1.4.1.25506.2.42.1.5.32		not-accessible	Session summary table.
hh3cOnuRS485SessionSummaryEntry	1.3.6.1.4.1.25506.2.42.1.5.32.1		not-accessible	The entry of session summary table.
I32 hh3cOnuRS485SessionMaxNum	1.3.6.1.4.1.25506.2.42.1.5.32.1.1	Integer32	read-only	The max session number of every serial port which can be supported.
I32 hh3cOnuRS485SessionNextIndex	1.3.6.1.4.1.25506.2.42.1.5.32.1.2	Integer32	read-only	The next valid index used for creating a new session raw. When there is no valid index left, it will return 0.
hh3cOnuRS485SessionTable	1.3.6.1.4.1.25506.2.42.1.5.33		not-accessible	RS485 raw session table. Data received from RS485 will be sent to the destination by raw sockets.
hh3cOnuRS485SessionEntry	1.3.6.1.4.1.25506.2.42.1.5.33.1		not-accessible	The entry of session table.
I32 hh3cOnuRS485SessionIndex	1.3.6.1.4.1.25506.2.42.1.5.33.1.1	Integer32	not-accessible	Raw session index.
INT hh3cOnuRS485SessionType	1.3.6.1.4.1.25506.2.42.1.5.33.1.2	INTEGER	read-create	The type of a session. A session can use UDP socket, TCP socket as a client, or TCP socket as a server.
IPt hh3cOnuRS485SessionAddType	1.3.6.1.4.1.25506.2.42.1.5.33.1.3	InetAddressType	read-create	This object indicates the transport type of the address contained in hh3cOnuRS485SessionRemoteIP object.
IP hh3cOnuRS485SessionRemoteIP	1.3.6.1.4.1.25506.2.42.1.5.33.1.4	InetAddress	read-create	The IP of remote landing. When session type is 'udp', this is the peer IP. When session type is 'tcpClient', this is the server IP. When session type is 'tcpServer', this is invalid.
I32 hh3cOnuRS485SessionRemotePort	1.3.6.1.4.1.25506.2.42.1.5.33.1.5	Integer32	read-create	The port of remote landing. When session type is 'udp', this is the peer port. When session type is 'tcpClient', this is the server port. When session type is 'tcpServer', this is invalid.
I32 hh3cOnuRS485SessionLocalPort	1.3.6.1.4.1.25506.2.42.1.5.33.1.6	Integer32	read-create	Local socket port. When session type is 'udp', this is local UDP socket port. When session type is 'tcpClient', this is invalid. When session type is 'tcpServer', this is the local port which will be listened.
ROW hh3cOnuRS485SessionRowStatus	1.3.6.1.4.1.25506.2.42.1.5.33.1.7	RowStatus	read-create	The status used for creating, modifying, and deleting instances of the columnar objects in raw session table.
hh3cOnuRS485SessionErrInfoTable	1.3.6.1.4.1.25506.2.42.1.5.34		not-accessible	Error information table. When failed to create a session, error information can be got from this table.
hh3cOnuRS485SessionErrInfoEntry	1.3.6.1.4.1.25506.2.42.1.5.34.1		not-accessible	The entry of error information table.
STR hh3cOnuRS485SessionErrInfo	1.3.6.1.4.1.25506.2.42.1.5.34.1.1	DisplayString	read-only	Error information string. When a response with 'noCreeation' for row creation in table hh3cOnuRS485SessionTable, the error reason can be got from this object.
hh3cEponBatchOperationMan	1.3.6.1.4.1.25506.2.42.1.6
hh3cEponBatchOperationBySlotTable	1.3.6.1.4.1.25506.2.42.1.6.1		not-accessible	This table is used for batch operation by slot.
hh3cEponBatchOperationBySlotEntry	1.3.6.1.4.1.25506.2.42.1.6.1.1		not-accessible	The entry of the hh3cEponBatchOperationBySlotTable.
I32 hh3cEponBatchOperationBySlotIndex	1.3.6.1.4.1.25506.2.42.1.6.1.1.1	Integer32	not-accessible	The EPON board index.
INT hh3cEponBatchOperationBySlotType	1.3.6.1.4.1.25506.2.42.1.6.1.1.2	INTEGER	read-write	The types of batch operation by slot: 1 - resetUnknown, the object value is not set. 9 - updateDba, update OLT DBA algorithm. Config the MIB object module hh3cEponDbaUpdateFileName. 10 - updateONU, update ONU firmware. Config the MIB object module hh3cEponOnuUpdateFileName with the filename of ONU firmware first.
INT hh3cEponBatchOperationBySlot	1.3.6.1.4.1.25506.2.42.1.6.1.1.3	INTEGER	read-write	Execute batch operation.
I32 hh3cEponBatchOperationBySlotResult	1.3.6.1.4.1.25506.2.42.1.6.1.1.4	Integer32	read-only	The result of batch operation. 0xFFFF - other, general error. 1 - working, operation is not completed. 2 - successful, completed successfully. 3 - failed because the DBA source file does not exist. 4 - failed because the ONU firmware file does not exist. 5 - failed because of not set the filename of DBA source. 6 - failed because of not set the filename of ONU firmware. 7 - failed because of not set slottype.
hh3cEponBatchOperationByOLTTable	1.3.6.1.4.1.25506.2.42.1.6.2		not-accessible	This table is used for batch operation by OLT.
hh3cEponBatchOperationByOLTEntry	1.3.6.1.4.1.25506.2.42.1.6.2.1		not-accessible	The entry of the hh3cEponBatchOperationByOLTTable.
INT hh3cEponBatchOperationByOLTType	1.3.6.1.4.1.25506.2.42.1.6.2.1.1	INTEGER	read-write	The types of batch operation by OLT(operation for all ONUs in the OLT): 1 -- resetUnknown, the object value is not set. 5 -- updateONU, update ONU firmware. configure the MIB object module hh3cEponOnuUpdateFileName with the filename of ONU firmware first.
INT hh3cEponBatchOperationByOLT	1.3.6.1.4.1.25506.2.42.1.6.2.1.2	INTEGER	read-write	Execute batch operation.
I32 hh3cEponBatchOperationByOLTResult	1.3.6.1.4.1.25506.2.42.1.6.2.1.3	Integer32	read-only	The result of batch operation: 0xFFFF -- other, gernal error. 1 -- working, operation is not completed. 2 -- successful, operation completed successfully. 4 -- failed because the ONU firmware file does not exist. 6 -- failed because of not set the filename of ONU firmware. 7 -- failed because of not set olttype.
hh3cOnuFirmwareUpdateByTypeTable	1.3.6.1.4.1.25506.2.42.1.6.3		not-accessible	This table is used to update ONU by ONU type.
hh3cOnuFirmwareUpdateByTypeEntry	1.3.6.1.4.1.25506.2.42.1.6.3.1		not-accessible	The entry of the hh3cOnuFirmwareUpdateByTypeTable.
I32 hh3cOnuUpdateByOnuTypeIndex	1.3.6.1.4.1.25506.2.42.1.6.3.1.1	Integer32	not-accessible	The type and file relationship table entry index.
OCT hh3cOnuUpdateByTypeOnuType	1.3.6.1.4.1.25506.2.42.1.6.3.1.2	OCTET STRING	read-create	The type of ONUs.
OCT hh3cOnuUpdateByTypeFileName	1.3.6.1.4.1.25506.2.42.1.6.3.1.3	OCTET STRING	read-create	The file to be updated for the type of ONUs.
ROW hh3cOnuUpdateByTypeRowStatus	1.3.6.1.4.1.25506.2.42.1.6.3.1.4	RowStatus	read-create	The status of this table entry. Only createAndGo and destroy actions are supported.
hh3cEponErrorInfo	1.3.6.1.4.1.25506.2.42.1.7
I32 hh3cEponSoftwareErrorCode	1.3.6.1.4.1.25506.2.42.1.7.1	Integer32	accessible-for-notify	OLT software error code.
I32 hh3cOamVendorSpecificAlarmCode	1.3.6.1.4.1.25506.2.42.1.7.2	Integer32	accessible-for-notify	Alarm code of the vendor.
OCT hh3cEponOnuRegErrorMacAddr	1.3.6.1.4.1.25506.2.42.1.7.3	OCTET STRING	accessible-for-notify	The MAC of ONU registered error.
U32 hh3cOamEventLogType	1.3.6.1.4.1.25506.2.42.1.7.4	Unsigned32	accessible-for-notify	The type of event that generated this entry in the event log.
INT hh3cOamEventLogLocation	1.3.6.1.4.1.25506.2.42.1.7.5	INTEGER	accessible-for-notify	Whether this event occurred locally, or was received from the OAM peer via Ethernet OAM.
I32 hh3cEponLoopbackPortIndex	1.3.6.1.4.1.25506.2.42.1.7.6	Integer32	accessible-for-notify	The index of port which generate loop back event.
OCT hh3cEponLoopbackPortDescr	1.3.6.1.4.1.25506.2.42.1.7.7	OCTET STRING	accessible-for-notify	A textual string containing information about the port generated loop back event.
U32 hh3cOltPortAlarmLlidMisFrames	1.3.6.1.4.1.25506.2.42.1.7.8	Unsigned32	accessible-for-notify	the amount of mismatched frames about the LLID mismatch alarm.
U32 hh3cOltPortAlarmBer	1.3.6.1.4.1.25506.2.42.1.7.9	Unsigned32	accessible-for-notify	error bit rate.
U32 hh3cOltPortAlarmFer	1.3.6.1.4.1.25506.2.42.1.7.10	Unsigned32	accessible-for-notify	error frames rate.
OCT hh3cEponOnuRegSilentMac	1.3.6.1.4.1.25506.2.42.1.7.11	OCTET STRING	accessible-for-notify	The MAC of silent ONU.
OCT hh3cEponOperationResult	1.3.6.1.4.1.25506.2.42.1.7.12	OCTET STRING	accessible-for-notify	The result of EPON operation.
INT hh3cEponOnuLaserState	1.3.6.1.4.1.25506.2.42.1.7.13	INTEGER	accessible-for-notify	The state of ONU laser.
hh3cEponTrap	1.3.6.1.4.1.25506.2.42.1.8
hh3cEponTrapPrefix	1.3.6.1.4.1.25506.2.42.1.8.0
NTF hh3cEponPortAlarmBerTrap	1.3.6.1.4.1.25506.2.42.1.8.0.1			A hh3cEponPortAlarmBerTrap notification is sent when a BER threshold crossing event is detected.
NTF hh3cEponPortAlarmFerTrap	1.3.6.1.4.1.25506.2.42.1.8.0.2			A hh3cEponPortAlarmFerTrap notification is sent when a frame error rate threshold crossing event is detected.
NTF hh3cEponErrorLLIDFrameTrap	1.3.6.1.4.1.25506.2.42.1.8.0.3			A hh3cEponErrorLLIDFrameTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected.
NTF hh3cEponLoopBackEnableTrap	1.3.6.1.4.1.25506.2.42.1.8.0.4			A hh3cEponLoopBackEnableTrap notification is sent when the loop back command is committed.
NTF hh3cEponOnuRegistrationErrTrap	1.3.6.1.4.1.25506.2.42.1.8.0.5			A hh3cEponOnuRegistrationErrTrap notification is sent when a ONU register failed.
NTF hh3cEponOamDisconnectionTrap	1.3.6.1.4.1.25506.2.42.1.8.0.6			A hh3cEponOamDisconnectionTrap notification is sent when LLID's OAM link is disconnected.
NTF hh3cEponEncryptionKeyErrTrap	1.3.6.1.4.1.25506.2.42.1.8.0.7			A hh3cEponEncryptionKeyErrTrap notification is sent when LLID's encryption key is bad.
NTF hh3cEponRemoteStableTrap	1.3.6.1.4.1.25506.2.42.1.8.0.8			A hh3cEponRemoteStableTrap notification is sent when remote Data Terminal Equipment(DTE) has not seen or is unsatisfied with local state information.
NTF hh3cEponLocalStableTrap	1.3.6.1.4.1.25506.2.42.1.8.0.9			A hh3cEponLocalStableTrap notification is sent when DTE has not seen or is unsatisfied with remote state information.
NTF hh3cEponOamVendorSpecificTrap	1.3.6.1.4.1.25506.2.42.1.8.0.10			A hh3cEponOamVendorSpecificTrap notification is sent when system vendor specific OAM alarm raised.
NTF hh3cEponSoftwareErrTrap	1.3.6.1.4.1.25506.2.42.1.8.0.11			A hh3cEponSoftwareErrTrap notification is sent when a PAS-SOFT internal error occurs.
NTF hh3cEponPortAlarmBerRecoverTrap	1.3.6.1.4.1.25506.2.42.1.8.0.12			A hh3cEponPortAlarmBerRecoverTrap notification is sent when a BER threshold crossing event is detected and then recovered.
NTF hh3cEponPortAlarmFerRecoverTrap	1.3.6.1.4.1.25506.2.42.1.8.0.13			A hh3cEponPortAlarmFerRecoverTrap notification is sent when a frame error rate threshold crossing event is detected and then recoverd.
NTF hh3cEponErrorLLIDFrameRecoverTrap	1.3.6.1.4.1.25506.2.42.1.8.0.14			A hh3cEponErrorLLIDFrameRecoverTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected and then recoverd.
NTF hh3cEponLoopBackEnableRecoverTrap	1.3.6.1.4.1.25506.2.42.1.8.0.15			A hh3cEponLoopBackEnableRecoverTrap notification is sent when the loop back is detected and then recoverd.
NTF hh3cEponOnuRegistrationErrRecoverTrap	1.3.6.1.4.1.25506.2.42.1.8.0.16			A hh3cEponOnuRegistrationErrRecoverTrap notification is sent when an ONU register failed and then register successful again.
NTF hh3cEponOamDisconnectionRecoverTrap	1.3.6.1.4.1.25506.2.42.1.8.0.17			A hh3cEponOamDisconnectionRecoverTrap notification is sent when LLID's OAM link is disconnected and then connected.
NTF hh3cEponEncryptionKeyErrRecoverTrap	1.3.6.1.4.1.25506.2.42.1.8.0.18			A hh3cEponEncryptionKeyErrRecoverTrap notification is sent when LLID's encryption key is bad and then right.
NTF hh3cEponRemoteStableRecoverTrap	1.3.6.1.4.1.25506.2.42.1.8.0.19			A hh3cEponRemoteStableRecoverTrap notification is sent when remote DTE has not seen or is unsatisfied with local state information and then is realized.
NTF hh3cEponLocalStableRecoverTrap	1.3.6.1.4.1.25506.2.42.1.8.0.20			A hh3cEponLocalStableRecoverTrap notification is sent when DTE has not seen or is unsatisfied with remote state information and then is realized.
NTF hh3cEponOamVendorSpecificRecoverTrap	1.3.6.1.4.1.25506.2.42.1.8.0.21			A hh3cEponOamVendorSpecificRecoverTrap notification is sent when system vendor specific OAM alarm is detected and then recovered.
NTF hh3cEponSoftwareErrRecoverTrap	1.3.6.1.4.1.25506.2.42.1.8.0.22			A hh3cEponSoftwareErrRecoverTrap notification is sent when a PAS-SOFT internal error is detected and then recovered.
NTF hh3cDot3OamThresholdRecoverEvent	1.3.6.1.4.1.25506.2.42.1.8.0.23			A hh3cDot3OamThresholdRecoverEvent notification is sent when hh3cDot3OamThresholdEvent is detected and then recoverd.
NTF hh3cDot3OamNonThresholdRecoverEvent	1.3.6.1.4.1.25506.2.42.1.8.0.24			A hh3cDot3OamNonThresholdRecoverEvent notification is sent when hh3cDot3OamNonThresholdEvent is detected and then recoverd.
NTF hh3cEponOnuRegExcessTrap	1.3.6.1.4.1.25506.2.42.1.8.0.25			A hh3cEponOnuRegExcessTrap notification is sent when the number of registered ONUs exceeds the limit.
NTF hh3cEponOnuRegExcessRecoverTrap	1.3.6.1.4.1.25506.2.42.1.8.0.26			A hh3cEponOnuRegExcessRecoverTrap notification is sent when hh3cEponOnuRegExcessTrap is detected and then recoverd.
NTF hh3cEponOnuPowerOffTrap	1.3.6.1.4.1.25506.2.42.1.8.0.27			A hh3cEponOnuPowerOffTrap notification is sent when ONU is power off.
NTF hh3cEponOltSwitchoverTrap	1.3.6.1.4.1.25506.2.42.1.8.0.28			A hh3cEponOltSwithoverTrap notification is sent when OLT switchover is detected.
NTF hh3cEponOltDFETrap	1.3.6.1.4.1.25506.2.42.1.8.0.29			A hh3cEponOltDFETrap notification is sent when there was a serious problem(device fatal error) on OLT.
NTF hh3cEponOltDFERecoverTrap	1.3.6.1.4.1.25506.2.42.1.8.0.30			A hh3cEponOltDFERecoverTrap notification is sent when device fatal error is detected and then recoverd.
NTF hh3cEponOnuSilenceTrap	1.3.6.1.4.1.25506.2.42.1.8.0.31			The hh3cEponOnuSilenceTrap notification is sent when an unbound ONU try to register to an OLT.
NTF hh3cEponOnuSilenceRecoverTrap	1.3.6.1.4.1.25506.2.42.1.8.0.32			The hh3cEponOnuSilenceRecoverTrap notification is sent when a silent ONU is bound in the OLT or the aging onu mac address is timeout.
NTF hh3cEponOnuUpdateResultTrap	1.3.6.1.4.1.25506.2.42.1.8.0.33			A hh3cEponUpdateResultTrap notification is sent when an ONU reported its firmware update result.
NTF hh3cEponOnuAutoBindTrap	1.3.6.1.4.1.25506.2.42.1.8.0.34			A hh3cEponOnuAutoBindTrap notification is sent when a silent ONU is bound automatically.
NTF hh3cEponOnuPortStpStateTrap	1.3.6.1.4.1.25506.2.42.1.8.0.35			A hh3cEponOnuPortStpStateTrap notification is sent when a port turns into another state in STP environment.
NTF hh3cEponOnuLaserFailedTrap	1.3.6.1.4.1.25506.2.42.1.8.0.36			A hh3cEponOnuLaserFailedTrap notification is sent when an ONU has trouble with laser, such as laser constantly turned on, signal degradation or optics EOL (End of Life).
NTF hh3cOnuSmlkSwitchoverTrap	1.3.6.1.4.1.25506.2.42.1.8.0.37			A hh3cOnuSmlkSwitchoverTrap notification is sent when an ONU SMLK switchover is detected.
hh3cEponStat	1.3.6.1.4.1.25506.2.42.1.9
hh3cEponStatTable	1.3.6.1.4.1.25506.2.42.1.9.1		not-accessible	This table contains line code error statistics of epon port.
hh3cEponStatEntry	1.3.6.1.4.1.25506.2.42.1.9.1.1		not-accessible	The entry of hh3cEponStatTable.
C64 hh3cEponStatFER	1.3.6.1.4.1.25506.2.42.1.9.1.1.1	Counter64	read-only	The frame error rate of epon port, measured in 1e-9 unit.
C64 hh3cEponStatBER	1.3.6.1.4.1.25506.2.42.1.9.1.1.2	Counter64	read-only	The bit error rate of epon port, measured in 1e-9 unit.

RFC description

H3C EPON (Ethernet Passive Optical Network) MIB for OLT and ONU management including bandwidth, QoS, and security features.

Start monitoring H3C EPON OLT equipment (port config/ONU auto-provisioning) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-EPON-MIB