HH3C-EPON-MIB :: hh3cOltAgcCdrTime

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HH3C-EPON-MIB › hh3cOltAgcCdrTime

hh3cOltAgcCdrTime

Module: HH3C-EPON-MIB

OID (symbolic): HH3C-EPON-MIB::hh3cOltAgcCdrTime

OID (numeric): 1.3.6.1.4.1.25506.2.42.1.3.2.1.6

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: PON RX signal synchronization time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value

What is hh3cOltAgcCdrTime?

Time the OLT needs to synchronize (clock and data recovery) to the PON upstream receive signal, in TQ, range 1 to 2^15; 0x7FFFFFFF means unknown. Read-only receiver-timing figure.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.42.1.3.2.1.6
snmpwalk -v2c -c public <target> HH3C-EPON-MIB::hh3cOltAgcCdrTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.42.1.3.2.1.6.1
snmpget -v2c -c public <target> HH3C-EPON-MIB::hh3cOltAgcCdrTime.1

Start monitoring H3C EPON OLT equipment (port config/ONU auto-provisioning) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-EPON-MIB::hh3cOltAgcCdrTime OID value, configure state conditions and alerts, and monitor any H3C EPON OLT equipment (port config/ONU auto-provisioning) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25506hh3cHH3C-OID-MIB
1.3.6.1.4.1.25506.2hh3cCommonHH3C-OID-MIB
1.3.6.1.4.1.25506.2.42hh3cEponHH3C-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.25506.2.42.1hh3cEponMibObjectsHH3C-EPON-MIB
1.3.6.1.4.1.25506.2.42.1.3hh3cEponOltManHH3C-EPON-MIB
1.3.6.1.4.1.25506.2.42.1.3.2hh3cOltInfoTableHH3C-EPON-MIB
1.3.6.1.4.1.25506.2.42.1.3.2.1hh3cOltInfoEntryHH3C-EPON-MIB
1.3.6.1.4.1.25506.2.42.1.3.2.1.6hh3cOltAgcCdrTimeHH3C-EPON-MIB