All MIBs › HPN-ICF-QOS-PROFILE-MIB
Last Updated: 2004-07-06
Category: Technology: QoS, Vendor: H3C/HH3C, Vendor: HP/HPE
Description: Manages named QoS service profile templates applied to subscribers or interfaces on HP/Comware devices.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HPN-ICF-QOS-PROFILE-MIB?
HPN-ICF-QOS-PROFILE-MIB is an H3C/HP Networking (Comware) vendor MIB for managing named QoS service profile templates that can be applied to subscriber sessions or interfaces, bundling settings like rate limits or queuing behavior under a reusable profile name. No module description text or sample objects were available in the source data for this entry, so specific table/object names cannot be confirmed, but based on its name it would be expected to expose a profile table (name, parameters) and a binding mechanism associating a profile with an interface or subscriber. As a profile-management MIB its monitoring value would primarily be confirming that the correct QoS profile is currently applied to a given target, rather than reporting live traffic/queue statistics directly. It would logically be used together with HPN-ICF-QOS-CAPABILITY-MIB, which advertises what QoS capabilities a device supports, and general interface MIBs for applying profiles per port. It would be deployed on HP/H3C Comware access or broadband edge devices that apply differentiated QoS treatment per subscriber or interface, with the HPN-ICF-QOS-PROFILE-MIB MIB exposing that profile-application state to SNMP management tools.
IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-QOS-PROFILE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- HP/H3C Comware access/edge switch or router
Monitoring Examples
No sample objects or module description were provided for this MIB, so no concrete monitoring scenario referencing real object names can be given honestly; based on its name it likely centers on a QoS-profile definition and application table rather than raw traffic counters.
This MIB depends on
Related MIBs
Imported Objects
From HPN-ICF-OID-MIB
| hpnicfCommon | OBJECT-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE |
From SNMPv2-TC
| MacAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hpnicfQoSAction | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2 | |||
| hpnicfQoSActionGroup | 1.3.6.1.4.1.11.2.14.11.15.2.17.3.2.2 | Included table: 1)hpnicfQoSTrafficLimitTable. 2)hpnicfQoSTrafficPriorityTable. 3)hpnicfQoSTrafficFilterTable | ||
| hpnicfQoSProf | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.1 | |||
| I32 hpnicfQoSProfActionNumber | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.1.1.1.3 | Integer32 | read-only | Total number of actions of a QoS profile. |
| hpnicfQoSProfDynPortMappingEntry | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3.1 | not-accessible | ||
| I32 hpnicfQoSProfDynPortMappingIfIndex | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3.1.1 | Integer32 | not-accessible | if index of the port user profile is applied. |
| hpnicfQoSProfDynPortMappingTable | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3 | not-accessible | Dynamic port mapping table is used to get user' port,MAC address,IP address,VLAN ID and user-specified qos profiles. Network managers can allocate different QOS profile groups to different users. Once the user is on line, then the user-specified QOS profiles will be dynamically applied to the port the user connects. Each port can have different groups of users simultaneously connected. Each group of users can have assiociation with multiple QOS profiles simultaneously. So the user's port,MAC address,IP address and VLAN ID will replace the source information in the ACL rules refered in the QOS profiles. Once the user is off line, then the user-specified QOS profiles will be dynamically deleted from the port the user connects. | |
| IP hpnicfQoSProfDynPortMappingUserIPAddr | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3.1.4 | IpAddress | read-only | User IP address |
| OCT hpnicfQoSProfDynPortMappingUserName | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3.1.3 | OCTET STRING | read-only | User name. |
| OCT hpnicfQoSProfDynPortMappingUserProfName | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3.1.6 | OCTET STRING | read-only | User profile name. |
| MAC hpnicfQoSProfDynPortMappingUserSrcMAC | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3.1.2 | MacAddress | not-accessible | User sourc MAC address. |
| I32 hpnicfQoSProfDynPortMappingUserVLANID | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3.1.5 | Integer32 | read-only | User VLAN ID. |
| hpnicfQoSProfEntry | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.1.1.1 | not-accessible | ||
| hpnicfQoSProfGroup | 1.3.6.1.4.1.11.2.14.11.15.2.17.3.2.1 | Included table: hpnicfQoSProfTable. | ||
| hpnicfQosProfile | 1.3.6.1.4.1.11.2.14.11.15.2.17 | The private MIB file includes the general information QoS profile. | ||
| I32 hpnicfQoSProfIndex | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.1.1.1.1 | Integer32 | not-accessible | QoS profile table index. |
| hpnicfQoSProfMibCompliance | 1.3.6.1.4.1.11.2.14.11.15.2.17.3.1.1 | The compliance statement for QoS Profile MIB. | ||
| hpnicfQoSProfMibCompliances | 1.3.6.1.4.1.11.2.14.11.15.2.17.3.1 | |||
| hpnicfQoSProfMibConformance | 1.3.6.1.4.1.11.2.14.11.15.2.17.3 | |||
| hpnicfQoSProfMibGroups | 1.3.6.1.4.1.11.2.14.11.15.2.17.3.2 | |||
| OCT hpnicfQoSProfName | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.1.1.1.2 | OCTET STRING | read-create | QoS profile name. |
| hpnicfQoSProfObjects | 1.3.6.1.4.1.11.2.14.11.15.2.17.1 | |||
| hpnicfQoSProfPortMapping | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.3 | |||
| hpnicfQoSProfPortMappingEntry | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.1.1 | not-accessible | ||
| NTF hpnicfQoSProfPortMappingError | 1.3.6.1.4.1.11.2.14.11.15.2.17.2.1 | An hpnicfQoSProfPortMappingError notification is generated when a qos profile fails to be applied on the port. | ||
| hpnicfQoSProfPortMappingGroup | 1.3.6.1.4.1.11.2.14.11.15.2.17.3.2.3 | Included tables: 1)hpnicfQoSProfPortMappingTable. 2)hpnicfQoSProfPortMappingModeTable. 3)hpnicfQoSProfDynPortMappingTable. | ||
| I32 hpnicfQoSProfPortMappingIfIndex | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.1.1.1 | Integer32 | not-accessible | The ifindex which the specified QoS profile group is applied to. |
| INT hpnicfQoSProfPortMappingMode | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.2.1.2 | INTEGER | read-write | The QoS profile mapping mode of specifed port. |
| hpnicfQoSProfPortMappingModeEntry | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.2.1 | not-accessible | ||
| I32 hpnicfQoSProfPortMappingModeIfIndex | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.2.1.1 | Integer32 | not-accessible | The ifindex which the QoS profile mapping mode is applied to. |
| hpnicfQoSProfPortMappingModeTable | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.2 | not-accessible | Port mapping mode table is used to set mapping mode of the port. When a qos profile is applied to a port, the profile can have two working ways: 1)The profile is the same for all the users connected to the port; 2)The profile can be different for different users connected to the port; Port-based mode means the profile is the same for all the users. User-based mode means the profile is different for different users. Default value is port-based. | |
| I32 hpnicfQoSProfPortMappingProfIndex | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.1.1.2 | Integer32 | not-accessible | The index of specified QoS profile group. |
| ROW hpnicfQoSProfPortMappingRowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.1.1.3 | RowStatus | read-create | RowStatus,Now support three state:CreateAndGo,Active,Destroy. |
| hpnicfQoSProfPortMappingTable | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.1 | not-accessible | Port mapping table is used to apply the qos profile to the port. If a qos profile is applied to the port, then the port will have an entry in the table. | |
| hpnicfQoSProfPortMappingTraps | 1.3.6.1.4.1.11.2.14.11.15.2.17.2 | |||
| hpnicfQoSProfPortMappingTrapsGroup | 1.3.6.1.4.1.11.2.14.11.15.2.17.3.2.4 | Included: hpnicfQoSProfPortMappingTraps. | ||
| ROW hpnicfQoSProfRowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.1.1.1.4 | RowStatus | read-create | RowStatus,Now support three state:CreateAndGo,Active,Destroy. |
| hpnicfQoSProfTable | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.1.1 | not-accessible | QoS profile table is used to config the qos profiles. | |
| hpnicfQoSTrafficFilterEntry | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1 | not-accessible | ||
| hpnicfQoSTrafficFilterTable | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3 | not-accessible | Traffic filter table is used to deny or permit packets. IP and Link ACL rules can be applied simultaneously, IP and User based ACL rules can not be applied simultaneously, Link and User based ACL rules can not be applied simultaneously. Unused ones is represented with default values. To deny or permit packets,the ACL rules should be defined in hpnicfAcl table. The 'deny' or 'permit' action should be defined with ACL rules. In this table,a predefined ACL rules can be referenced in a specified QOS profile group. 'Direction' means the ACL rules can be applied to the inbound or outbound packets. | |
| hpnicfQoSTrafficLimitEntry | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1 | not-accessible | ||
| hpnicfQoSTrafficLimitTable | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1 | not-accessible | Traffic limit table is used to set the average rate or peak rate of the flow. IP and Link ACL rules can be applied simultaneously, IP and User based ACL rules can not be applied simultaneously, Link and User based ACL rules can not be applied simultaneously. Unused ones is represented with default values. | |
| hpnicfQoSTrafficPriorityEntry | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1 | not-accessible | ||
| hpnicfQoSTrafficPriorityTable | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2 | not-accessible | Traffic priority table is used to remark the IP-precedence, DSCP or COS priority of packets. IP and Link ACL rules can be applied simultaneously, IP and User based ACL rules can not be applied simultaneously, Link and User based ACL rules can not be applied simultaneously. Unused ones is represented with default values. QOS policed service from DSCP mapping table is pre-defined in the hpnicfDscpMapTable in the HPN-ICF-LswQos-MIB. Policed service can decide what kind of QOS service the flow should get by the DSCP vlaue in the packets. Policed service includes remarking new DSCP,new EXP,new 802.1p priority,new local precedence and new drop priority. | |
| I32 hpnicfQoSTrafFilterActionIndex | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.2 | Integer32 | not-accessible | The index of traffic-filter action. |
| HPN hpnicfQoSTrafFilterDirection | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.3 | HpnicfQoSDirection | read-create | The direction of traffic-filter action. |
| I32 hpnicfQoSTrafFilterIpAclNum | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.6 | Integer32 | read-create | The number of Ip-based acl group. |
| I32 hpnicfQoSTrafFilterIpAclRule | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.7 | Integer32 | read-create | The subitem of IP-based acl rule. |
| I32 hpnicfQoSTrafFilterLinkAclNum | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.8 | Integer32 | read-create | The number of Link-based acl group |
| I32 hpnicfQoSTrafFilterLinkAclRule | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.9 | Integer32 | read-create | The subitem of Link-based acl rule. |
| I32 hpnicfQoSTrafFilterProfIndex | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.1 | Integer32 | not-accessible | The index of QoS profile which the traffic-filter action belongs to. |
| ROW hpnicfQoSTrafFilterRowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.10 | RowStatus | read-create | RowStatus,Now support three state:CreateAndGo,Active,Destroy. |
| I32 hpnicfQoSTrafFilterUserAclNum | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.4 | Integer32 | read-create | The number of user-based acl group. |
| I32 hpnicfQoSTrafFilterUserAclRule | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.5 | Integer32 | read-create | The subitem of user-based acl rule. |
| I32 hpnicfQoSTrafLmtActionIndex | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.2 | Integer32 | not-accessible | The index of traffic-limit action. |
| I32 hpnicfQoSTrafLmtCBS | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.14 | Integer32 | read-create | Committed Burst Size. unit:byte. |
| I32 hpnicfQoSTrafLmtCIR | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.13 | Integer32 | read-create | Committed Information Rate. unit:kbps. |
| INT hpnicfQoSTrafLmtConformActionType | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.18 | INTEGER | read-create | The action type of conformed flow. |
| I32 hpnicfQoSTrafLmtConformCos | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.23 | Integer32 | read-create | If the user chooses remark-cos value of the hpnicfQoSTrafLmtConformActionType, this object can be used to set the conform cos value. There are some enumerations as follows: best-effort Specify best-effort priority(0) background Specify background priority(1) spare Specify spare priority(2) excellent-effort Specify excellent-effort priority(3) controlled-load Specify controlled-load priority(4) video Specify video priority(5) voice Specify voice priority(6) network-management Specify network-management priority(7) 255 indicates invalid value. |
| I32 hpnicfQoSTrafLmtConformDscp | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.24 | Integer32 | read-create | If the user chooses remark-dscp value of the hpnicfQoSTrafLmtConformActionType, this object can be used to set the conform dscp value. There are some enumerations as follows: Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46) 255 indicates invalid value. |
| I32 hpnicfQoSTrafLmtConformLocalPre | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.17 | Integer32 | read-create | The local precedence of conformed flow. |
| HPN hpnicfQoSTrafLmtDirection | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.3 | HpnicfQoSDirection | read-create | The direction of traffic-limit action. |
| I32 hpnicfQoSTrafLmtEBS | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.15 | Integer32 | read-create | Excess Burst Size. unit:byte. |
| INT hpnicfQoSTrafLmtExceedActionType | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.19 | INTEGER | read-create | The action type of non-conformed flow. |
| I32 hpnicfQoSTrafLmtExceedCos | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.21 | Integer32 | read-create | The remarked COS value of non-conformed flow. COS 255 is used as default value and for get/get-next operation of this node. If the user does not set exceeding action as remarking COS, then value 255 is returned for get/get-next operation. |
| I32 hpnicfQoSTrafLmtExceedDscp | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.20 | Integer32 | read-create | The remarked DSCP value of non-conformed flow. DSCP 255 is used as default value and for get/get-next operation of this node. If the user does not set exceeding action as remarking DSCP, then value 255 is returned for get/get-next operation. |
| I32 hpnicfQoSTrafLmtIpAclNum | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.6 | Integer32 | read-create | The number of Ip-based acl group. |
| I32 hpnicfQoSTrafLmtIpAclRule | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.7 | Integer32 | read-create | The subitem of IP-based acl rule. |
| I32 hpnicfQoSTrafLmtLinkAclNum | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.8 | Integer32 | read-create | The number of Link-based acl group |
| I32 hpnicfQoSTrafLmtLinkAclRule | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.9 | Integer32 | read-create | The subitem of Link-based acl rule. |
| I32 hpnicfQoSTrafLmtPeakRate | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.12 | Integer32 | read-create | Peak rate |
| I32 hpnicfQoSTrafLmtPIR | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.16 | Integer32 | read-create | Peak Information Rate. unit:kbps. |
| I32 hpnicfQoSTrafLmtProfIndex | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.1 | Integer32 | not-accessible | The index of QoS profile which the traffic-limit action belongs to. |
| ROW hpnicfQoSTrafLmtRowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.22 | RowStatus | read-create | RowStatus,Now support three state:CreateAndGo,Active,Destroy. |
| I32 hpnicfQoSTrafLmtTargetRateKbps | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.11 | Integer32 | read-create | Target rate:Kbps. Some products only support Kbps,but others support Mbps,so Kbps and Mbps should be supportted mutually exclusively on the same product. |
| I32 hpnicfQoSTrafLmtTargetRateMbps | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.10 | Integer32 | read-create | Target rate:Mbps Some products only support Mbps,but others support Kbps,so Kbps and Mbps should be supportted mutually exclusively on the same product. |
| I32 hpnicfQoSTrafLmtUserAclNum | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.4 | Integer32 | read-create | The number of user-based acl group. |
| I32 hpnicfQoSTrafLmtUserAclRule | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.5 | Integer32 | read-create | The subitem of user-based acl rule. |
| I32 hpnicfQoSTrafPrioActionIndex | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.2 | Integer32 | not-accessible | The index of traffic-priority action. |
| I32 hpnicfQoSTrafPrioCos | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.13 | Integer32 | read-create | Set vlan priority of specifed flow. COS 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking COS, then value 255 is returned for get/get-next operation. |
| T/F hpnicfQoSTrafPrioCosFromIpPre | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.14 | TruthValue | read-create | Set vlan priority according to IP precedence. False(2)is used as default value and for get/get-next operation of this node. If the user does not set action as remarking COS from Ip precedence, then value 2 is returned for get/get-next operation. |
| HPN hpnicfQoSTrafPrioDirection | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.3 | HpnicfQoSDirection | read-create | The direction of traffic-priority action. |
| I32 hpnicfQoSTrafPrioDscp | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.10 | Integer32 | read-create | Set new DSCP value of specifed flow. DSCP 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking DSCP, then value 255 is returned for get/get-next operation. |
| I32 hpnicfQoSTrafPrioIpAclNum | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.6 | Integer32 | read-create | The number of Ip-based acl group. |
| I32 hpnicfQoSTrafPrioIpAclRule | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.7 | Integer32 | read-create | The subitem of IP-based acl rule. |
| I32 hpnicfQoSTrafPrioIpPre | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.11 | Integer32 | read-create | Set Ip precedence value of specifed flow. Ip precedence 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking Ip precedence, then value 255 is returned for get/get-next operation. |
| T/F hpnicfQoSTrafPrioIpPreFromCos | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.12 | TruthValue | read-create | Set Ip precedence according to vlan priority. False(2)is used as default value and for get/get-next operation of this node. If the user does not set action as remarking Ip precedence from COS, then value 2 is returned for get/get-next operation. |
| I32 hpnicfQoSTrafPrioLinkAclNum | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.8 | Integer32 | read-create | The number of Link-based acl group |
| I32 hpnicfQoSTrafPrioLinkAclRule | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.9 | Integer32 | read-create | The subitem of Link-based acl rule. |
| I32 hpnicfQoSTrafPrioLocalPre | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.15 | Integer32 | read-create | Set local precedence of specifed flow. Local precedence 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking local precedence, then value 255 is returned for get/get-next operation. |
| I32 hpnicfQoSTrafPrioPolicedServiceCos | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.19 | Integer32 | read-create | The service cos of policed Priority |
| I32 hpnicfQoSTrafPrioPolicedServiceDropPriority | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.21 | Integer32 | read-create | The service drop priority of proliced Priority |
| I32 hpnicfQoSTrafPrioPolicedServiceDscp | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.17 | Integer32 | read-create | The service Dscp of policed Priority |
| I32 hpnicfQoSTrafPrioPolicedServiceExp | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.18 | Integer32 | read-create | The service Exp of policed Priority |
| I32 hpnicfQoSTrafPrioPolicedServiceLoaclPre | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.20 | Integer32 | read-create | The service local pre of policed Priority |
| INT hpnicfQoSTrafPrioPolicedServiceType | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.16 | INTEGER | read-create | The service type of policed Priority. Policed Service is not allowed to be set with remarking DSCP,IpPrecedence,IpPrecedenceFromCOS,COS,COSFromIpPrecedence and LocalPrecedence action simultaneously on the same product. Policed service is user-predefined qos policy parameters. trust-dscp(2) means to decide new police service parameters by the DSCP value in the packets. new-dscp(3) means to decide new police service parameters by the new DSCP value set by the user. And a DSCP mapping table should be pre-defined in the hpnicfDscpMapTable in the HPN-ICF-LswQos-MIB. Untrusted(4) means to set all the new DSCP,EXP,COS,Local precedence and Drop priority by the user. |
| I32 hpnicfQoSTrafPrioProfIndex | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.1 | Integer32 | not-accessible | The index of QoS profile which the traffic-priority action belongs to. |
| ROW hpnicfQoSTrafPrioRowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.22 | RowStatus | read-create | RowStatus,Now support three state:CreateAndGo,Active,Destroy. |
| I32 hpnicfQoSTrafPrioUserAclNum | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.4 | Integer32 | read-create | The number of user-based acl group. |
| I32 hpnicfQoSTrafPrioUserAclRule | 1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.5 | Integer32 | read-create | The subitem of user-based acl rule. |
RFC description
HP/HPE private SNMP MIB module for Quality of Service (QoS) profile management. Part of HP's Intelligent Connectivity Framework (ICF) product line, providing QoS policy configuration and monitoring for network devices.
Start monitoring HP/H3C Comware access/edge switch or router (named QoS profile templates) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.