All MIBs › HH3C-LSW-DEV-ADM-MIB
Organization: Hangzhou H3C Technologies Co., Ltd.
Last Updated: 2009-03-19
Category: Device Management, Technology: Switching/L2, Vendor: H3C/HH3C
Description:
Manages device administration objects for H3C Layer 2 switches including system resources and slot configuration.
Imported Objects
From HH3C-OID-MIB
| hh3clswCommon | OBJECT-IDENTITY |
From SNMPv2-SMI
| Counter64 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| TEXTUAL-CONVENTION |
What Is HH3C-LSW-DEV-ADM-MIB?
HH3C-LSW-DEV-ADM-MIB is H3C's (Hangzhou Huawei-3Com, now part of HPE) private device-administration MIB for its LSW family of Layer 2 switches, covering system-level administrative resources and slot/card configuration for the switch chassis. It groups objects related to system resource management and per-slot configuration parameters, positioning it as a device-administration rather than a pure performance-counter MIB. Administrators rely on the HH3C-LSW-DEV-ADM-MIB MIB to monitor switch software/hardware status such as system resource utilization (an indicator akin to CPU/memory pressure) and slot configuration state, helping confirm whether an installed module or card is correctly configured and operating within expected parameters. It builds on H3C's common enterprise MIB conventions and likely complements standard MIB-II and ENTITY-MIB style structures used elsewhere to index chassis slots and physical components. It is deployed on H3C (HPE) Layer 2 switches, both fixed and modular/stackable, in enterprise campus and data-center network environments.
IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-LSW-DEV-ADM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- system resource utilization
- slot/module configuration status
- device administrative state
Supported Devices
- H3C S5560X-EI (2022) — converged Gigabit Layer 2/3 access/aggregation switch series
- H3C S5560S-SI — Gigabit Layer 3 access switch series for small/midsize business
Monitoring Examples
No concrete sample objects were provided for this module -- its module description simply notes "The latest baseline" -- so specific table or object names cannot be grounded to verified evidence. Based on its stated purpose, an administrator would expect to poll system resource utilization objects and per-slot configuration/status entries to detect a switch running low on system resources or a slot module that has gone offline or is misconfigured, but this cannot be stated as confirmed fact without seeing the actual object names.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hh3cLswDeviceAdmin | 1.3.6.1.4.1.25506.8.35.18 | The latest baseline. | ||
| hh3cLswSystemPara | 1.3.6.1.4.1.25506.8.35.18.1 | |||
| IP hh3cLswSysIpAddr | 1.3.6.1.4.1.25506.8.35.18.1.1 | IpAddress | read-only | System IP address, which is the primary IP address of the VLAN interface that has smallest VLAN ID and is configured IP address. |
| IP hh3cLswSysIpMask | 1.3.6.1.4.1.25506.8.35.18.1.2 | IpAddress | read-only | Mask of the system IP address. |
| I32 hh3cLswSysCpuRatio | 1.3.6.1.4.1.25506.8.35.18.1.3 | Integer32 | read-only | CPU usage of the system in accuracy of 1%, and the range of value is 1 to 100. |
| STR hh3cLswSysVersion | 1.3.6.1.4.1.25506.8.35.18.1.4 | DisplayString | read-only | Information of the system version. |
| DAT hh3cLswSysTime | 1.3.6.1.4.1.25506.8.35.18.1.5 | DateAndTime | read-write | System time. |
| INT hh3cLswSysUNMCastDropEnable | 1.3.6.1.4.1.25506.8.35.18.1.6 | INTEGER | read-write | Enable or disable discarding of unknown multicast packet. |
| I32 hh3cLswSysManagementVlan | 1.3.6.1.4.1.25506.8.35.18.1.7 | Integer32 | read-write | System management VLAN. |
| STR hh3cLswSysVlanRange | 1.3.6.1.4.1.25506.8.35.18.1.8 | DisplayString | read-write | System VLAN range, if set VLAN range, must bind mangement IP/Mask. |
| IP hh3cLswSysManagementIpAddr | 1.3.6.1.4.1.25506.8.35.18.1.9 | IpAddress | read-write | System IP address. |
| IP hh3cLswSysManagementIpMask | 1.3.6.1.4.1.25506.8.35.18.1.10 | IpAddress | read-write | Mask of the system IP address. |
| I32 hh3cMacAddressCountPort | 1.3.6.1.4.1.25506.8.35.18.1.11 | Integer32 | read-only | Supportted MAC address number on port. |
| I32 hh3cMacAddressCountMachine | 1.3.6.1.4.1.25506.8.35.18.1.12 | Integer32 | read-only | Supportted MAC address number on machine. |
| U32 hh3cLswSysPhyMemory | 1.3.6.1.4.1.25506.8.35.18.1.13 | Unsigned32 | read-only | The memory of physical. For the distributed device, it represents the memory size on the master slot. If the amount of physical memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes. |
| U32 hh3cLswSysMemory | 1.3.6.1.4.1.25506.8.35.18.1.14 | Unsigned32 | read-only | The memory of system. Note that the system memory means the memory can be used by the software platform. For the distributed device, it represents the memory size on the master slot. If the amount of system memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes. |
| U32 hh3cLswSysMemoryUsed | 1.3.6.1.4.1.25506.8.35.18.1.15 | Unsigned32 | read-only | The system memory in use. Note that the system memory means the memory can be used by the software platform. For the distributed device, it represents the memory size on the master slot. If the amount of used memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes. |
| U32 hh3cLswSysMemoryRatio | 1.3.6.1.4.1.25506.8.35.18.1.16 | Unsigned32 | read-only | The percentage of system memory in use. Note that the system memory means the memory can be used by the software platform. hh3cLswSysMemoryUsed hh3cLswSysMemoryRatio = -------------------- hh3cLswSysMemory For the distributed device, it represents the memory used ratio on the master slot. |
| I32 hh3cLswSysTemperature | 1.3.6.1.4.1.25506.8.35.18.1.17 | Integer32 | read-only | The temperature of system. For the distributed device, it represents the temperature on the master slot. |
| hh3cLswSlotConf | 1.3.6.1.4.1.25506.8.35.18.4 | |||
| hh3cLswFrameTable | 1.3.6.1.4.1.25506.8.35.18.4.2 | not-accessible | Frame information table. | |
| hh3cLswFrameEntry | 1.3.6.1.4.1.25506.8.35.18.4.2.1 | not-accessible | Frame description table entry. | |
| I32 hh3cLswFrameIndex | 1.3.6.1.4.1.25506.8.35.18.4.2.1.1 | Integer32 | read-only | The unique index of frame. |
| I32 hh3cLswFrameType | 1.3.6.1.4.1.25506.8.35.18.4.2.1.2 | Integer32 | read-only | Frame type. |
| STR hh3cLswFrameDesc | 1.3.6.1.4.1.25506.8.35.18.4.2.1.3 | DisplayString | read-write | Frame description. |
| I32 hh3cLswSlotNumber | 1.3.6.1.4.1.25506.8.35.18.4.2.1.4 | Integer32 | read-only | Number of slots of the current frame. |
| INT hh3cLswFrameAdminStatus | 1.3.6.1.4.1.25506.8.35.18.4.2.1.5 | INTEGER | read-only | The Status of frame. |
| hh3cLswSlotTable | 1.3.6.1.4.1.25506.8.35.18.4.3 | not-accessible | Slot description table. | |
| hh3cLswSlotEntry | 1.3.6.1.4.1.25506.8.35.18.4.3.1 | not-accessible | Slot description table entry. | |
| I32 hh3cLswSlotIndex | 1.3.6.1.4.1.25506.8.35.18.4.3.1.1 | Integer32 | read-only | Slot index. When the slot is empty, listed as vacant slot. |
| HH3 hh3cLswSlotType | 1.3.6.1.4.1.25506.8.35.18.4.3.1.2 | Hh3cLswTypeOfSlot | read-only | Slot type. BOM number is recommended. |
| STR hh3cLswSlotDesc | 1.3.6.1.4.1.25506.8.35.18.4.3.1.3 | DisplayString | read-write | Slot description. |
| I32 hh3cLswSlotCpuRatio | 1.3.6.1.4.1.25506.8.35.18.4.3.1.4 | Integer32 | read-only | CPU usage of the slot in accuracy of 1%, and the range of value is 1 to 100. |
| STR hh3cLswSlotPcbVersion | 1.3.6.1.4.1.25506.8.35.18.4.3.1.5 | DisplayString | read-only | Hardware version of the board. |
| STR hh3cLswSlotSoftwareVersion | 1.3.6.1.4.1.25506.8.35.18.4.3.1.6 | DisplayString | read-only | Software version of the board. |
| I32 hh3cLswSubslotNumber | 1.3.6.1.4.1.25506.8.35.18.4.3.1.7 | Integer32 | read-only | Number of the cards of the board. |
| INT hh3cLswSlotAdminStatus | 1.3.6.1.4.1.25506.8.35.18.4.3.1.8 | INTEGER | read-only | Slot status. |
| INT hh3cLswSlotOperStatus | 1.3.6.1.4.1.25506.8.35.18.4.3.1.9 | INTEGER | read-write | Slot operation status. |
| U32 hh3cLswSlotPhyMemory | 1.3.6.1.4.1.25506.8.35.18.4.3.1.10 | Unsigned32 | read-only | The memory of physical on the board. If the amount of physical memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes. |
| U32 hh3cLswSlotMemory | 1.3.6.1.4.1.25506.8.35.18.4.3.1.11 | Unsigned32 | read-only | The memory of system on the board. Note that the system memory means the memory can be used by the software platform. If the amount of system memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes. |
| U32 hh3cLswSlotMemoryUsed | 1.3.6.1.4.1.25506.8.35.18.4.3.1.12 | Unsigned32 | read-only | The system memory in use on the board. Note that the system memory means the memory can be used by the software platform. If the amount of used memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes. |
| U32 hh3cLswSlotMemoryRatio | 1.3.6.1.4.1.25506.8.35.18.4.3.1.13 | Unsigned32 | read-only | The percentage of system memory in use on the board. Note that the system memory means the memory can be used by the software platform. |
| I32 hh3cLswSlotTemperature | 1.3.6.1.4.1.25506.8.35.18.4.3.1.14 | Integer32 | read-only | The temperature of system on the board. |
| I32 hh3cLswSlotPktBufFree | 1.3.6.1.4.1.25506.8.35.18.4.3.1.15 | Integer32 | read-only | The number of packet buffers available for internal VME transfers or external transfers, respectively. Because switch operations and application software modules impose some overhead on global memory buffers, the number of buffers available for data transfers is less than the total number of buffers allocated when the switch boots. |
| I32 hh3cLswSlotPktBufInit | 1.3.6.1.4.1.25506.8.35.18.4.3.1.16 | Integer32 | read-only | The number of packet buffers allocated when the switch booted. |
| I32 hh3cLswSlotPktBufMin | 1.3.6.1.4.1.25506.8.35.18.4.3.1.17 | Integer32 | read-only | The smallest number of packet buffers available since the switch booted. |
| C64 hh3cLswSlotPktBufMiss | 1.3.6.1.4.1.25506.8.35.18.4.3.1.18 | Counter64 | read-only | The number of times that the switch was unable to obtain a packet buffer. Failure to obtain a buffer indicates that buffers were busy. |
| hh3cLswSubslotTable | 1.3.6.1.4.1.25506.8.35.18.4.4 | not-accessible | Subslot description table. | |
| hh3cLswSubslotEntry | 1.3.6.1.4.1.25506.8.35.18.4.4.1 | not-accessible | Subslot description table entry. | |
| I32 hh3cLswSubslotIndex | 1.3.6.1.4.1.25506.8.35.18.4.4.1.1 | Integer32 | read-only | Subslot index. |
| HH3 hh3cLswSubslotType | 1.3.6.1.4.1.25506.8.35.18.4.4.1.2 | Hh3cLswTypeOfSlot | read-only | Type of the pinch board in the subslot. |
| I32 hh3cLswSubslotPortNum | 1.3.6.1.4.1.25506.8.35.18.4.4.1.3 | Integer32 | read-only | Number of physical ports in the pinch board. |
| INT hh3cLswSubslotAdminStatus | 1.3.6.1.4.1.25506.8.35.18.4.4.1.4 | INTEGER | read-only | Status of the pinch board in the subslot. |
| I32 hh3cLswSubslotFirstIfIndex | 1.3.6.1.4.1.25506.8.35.18.4.4.1.5 | Integer32 | read-only | The value of ifIndex of the first physical port in the pinch board. |
| hh3cLswPortTable | 1.3.6.1.4.1.25506.8.35.18.4.5 | not-accessible | Port configuration table. | |
| hh3cLswPortEntry | 1.3.6.1.4.1.25506.8.35.18.4.5.1 | not-accessible | Port configuration table entry. | |
| I32 hh3cLswPortIndex | 1.3.6.1.4.1.25506.8.35.18.4.5.1.1 | Integer32 | read-only | The port number on the device. The first port number is 1, which is reserved if the port does not exist. |
| INT hh3cLswPortType | 1.3.6.1.4.1.25506.8.35.18.4.5.1.2 | INTEGER | read-only | Normally the port type is the same as its card type. When there are different types of ports in one card, use the actual port type. |
| I32 hh3cLswPortIfindex | 1.3.6.1.4.1.25506.8.35.18.4.5.1.3 | Integer32 | read-only | The value of ifIndex of the port. |
| INT hh3cLswPortIsPlugged | 1.3.6.1.4.1.25506.8.35.18.4.5.1.4 | INTEGER | read-only | Port is plugged or not. |
| hh3cLswPortLoopbackTable | 1.3.6.1.4.1.25506.8.35.18.4.6 | not-accessible | Port loopback test table. | |
| hh3cLswPortLoopbackEntry | 1.3.6.1.4.1.25506.8.35.18.4.6.1 | not-accessible | Port loopback test table entry. | |
| INT hh3cLswPortLoopbackIsSupport | 1.3.6.1.4.1.25506.8.35.18.4.6.1.1 | INTEGER | read-only | The loopback type can be supported by current port. |
| INT hh3cLswPortLoopbackOperate | 1.3.6.1.4.1.25506.8.35.18.4.6.1.2 | INTEGER | read-write | Port loopback operate type. Read operation not supported. |
| INT hh3cLswPortLoopbackResult | 1.3.6.1.4.1.25506.8.35.18.4.6.1.3 | INTEGER | read-only | Loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense. |
| INT hh3cLswPortLoopbackAutoStopSupport | 1.3.6.1.4.1.25506.8.35.18.4.6.1.4 | INTEGER | read-only | Whether this port support NEED-MANNUL-NOLOOP mode or not. |
| INT hh3cLswPortLoopbackRemoteResult | 1.3.6.1.4.1.25506.8.35.18.4.6.1.5 | INTEGER | read-write | The remote loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense. |
| INT hh3cLswPortLoopbackLocalResult | 1.3.6.1.4.1.25506.8.35.18.4.6.1.6 | INTEGER | read-write | The local loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense. |
| INT hh3cLswPortLoopbackInternalResult | 1.3.6.1.4.1.25506.8.35.18.4.6.1.7 | INTEGER | read-write | The internal loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense. |
| INT hh3cLswPortLoopbackExternalResult | 1.3.6.1.4.1.25506.8.35.18.4.6.1.8 | INTEGER | read-write | The external loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense. |
| hh3cLswFabricTable | 1.3.6.1.4.1.25506.8.35.18.4.7 | not-accessible | This table contains the information of fabric. | |
| hh3cLswFabricEntry | 1.3.6.1.4.1.25506.8.35.18.4.7.1 | not-accessible | An entry in hh3cLswFabricTable. | |
| I32 hh3cLswFabricChannelIndex | 1.3.6.1.4.1.25506.8.35.18.4.7.1.1 | Integer32 | not-accessible | The channel number of fabric. |
| I32 hh3cLswFabricUtilIn | 1.3.6.1.4.1.25506.8.35.18.4.7.1.2 | Integer32 | read-only | Ingress utilization of fabric. |
| I32 hh3cLswFabricUtilOut | 1.3.6.1.4.1.25506.8.35.18.4.7.1.3 | Integer32 | read-only | Egress utilization of fabric. |
| I32 hh3cLswFabricPeakIn | 1.3.6.1.4.1.25506.8.35.18.4.7.1.4 | Integer32 | read-only | Ingress peak of utilization for fabric. |
| DAT hh3cLswFabricPeakInTime | 1.3.6.1.4.1.25506.8.35.18.4.7.1.5 | DateAndTime | read-only | Ingress peak time of utilization for fabric. |
| I32 hh3cLswFabricPeakOut | 1.3.6.1.4.1.25506.8.35.18.4.7.1.6 | Integer32 | read-only | Egress peak of utilization for fabric. |
| DAT hh3cLswFabricPeakOutTime | 1.3.6.1.4.1.25506.8.35.18.4.7.1.7 | DateAndTime | read-only | Egress peak time of utilization for fabric. |
RFC description
H3C LAN switch device administration MIB; manages device-level configuration on H3C network switches.
Start monitoring H3C LSW-family Layer 2 switch (device administration/slot config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.