H3C-NQA-MIB :: h3cNqaJitterRTTOverThreshold

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › H3C-NQA-MIB › h3cNqaJitterRTTOverThreshold

h3cNqaJitterRTTOverThreshold

Module: H3C-NQA-MIB

OID (symbolic): H3C-NQA-MIB::h3cNqaJitterRTTOverThreshold

OID (numeric): 1.3.6.1.4.1.2011.10.8.3.3.2

Node type: NOTIFICATION-TYPE

Description: It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold.

The over threshold situations is specified as below. 1. The average NQA round-trip-time (RTT) of jitter packets is not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit. 2. The RTT of jitter packets is accumulatively not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit for a number of times specified in h3cNqaReactThresholdAccumNum in one test.

This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is h3cNqajitter.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' H3C-NQA-MIB::h3cNqaJitterRTTOverThreshold
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.2011.10.8.3.3.2

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:62625->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (51247265) 5 days, 22:21:12.65
  SNMPv2-MIB::snmpTrapOID.0 = OID: H3C-NQA-MIB::h3cNqaJitterRTTOverThreshold

Start monitoring H3C router/switch (NQA active network quality testing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the H3C-NQA-MIB::h3cNqaJitterRTTOverThreshold OID value, configure state conditions and alerts, and monitor any H3C router/switch (NQA active network quality testing) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2011huaweiEXPERTV2-MIB
1.3.6.1.4.1.2011.10h3cHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.10.8h3cRhwHUAWEI-3COM-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2011.10.8.3h3cNqaH3C-NQA-MIB
1.3.6.1.4.1.2011.10.8.3.3h3cNqaNotificationsH3C-NQA-MIB
1.3.6.1.4.1.2011.10.8.3.3.2h3cNqaJitterRTTOverThresholdH3C-NQA-MIB