All MIBs › H3C-NQA-MIB › h3cNqaJitterSDOverThreshold
h3cNqaJitterSDOverThreshold
Module: H3C-NQA-MIB
OID (symbolic): H3C-NQA-MIB::h3cNqaJitterSDOverThreshold
OID (numeric): 1.3.6.1.4.1.2011.10.8.3.3.5
Node type: NOTIFICATION-TYPE
Description: The SD means the jitter values from source to destination.
It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold.
The over threshold situations is specified as below. 1. The average of SD in one jitter test is not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit and the h3cNqaReactThresholdType is specified as 'average' type. 2. The average of SD in one jitter test is accumulatively not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit for a number of times specified in h3cNqaReactThresholdAccumNum and the h3cNqaReactThresholdType is specified as 'accumulative' type.
This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is h3cNqajitter.
Examples
Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):
snmptrap -v2c -c public <manager> '' H3C-NQA-MIB::h3cNqaJitterSDOverThreshold snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.2011.10.8.3.3.5
Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):
snmptrapd -f -Lo -c /dev/null authCommunity log public
Example snmptrapd log entry:
zoo11-linux.zoo [UDP: [192.168.30.111]:57602->[192.168.30.10]:162]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (146721538) 16 days, 23:33:35.38 SNMPv2-MIB::snmpTrapOID.0 = OID: H3C-NQA-MIB::h3cNqaJitterSDOverThreshold
Start monitoring H3C router/switch (NQA active network quality testing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the H3C-NQA-MIB::h3cNqaJitterSDOverThreshold OID value, configure state conditions and alerts, and monitor any H3C router/switch (NQA active network quality testing) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.10 | h3c | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.10.8 | h3cRhw | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.10.8.3 | h3cNqa | H3C-NQA-MIB |
| 1.3.6.1.4.1.2011.10.8.3.3 | h3cNqaNotifications | H3C-NQA-MIB |
| 1.3.6.1.4.1.2011.10.8.3.3.5 | h3cNqaJitterSDOverThreshold | H3C-NQA-MIB |