All MIBs › H3C-NQA-MIB › h3cNqaProbeTimeOverThreshold

h3cNqaProbeTimeOverThreshold

OID (symbolic): H3C-NQA-MIB::h3cNqaProbeTimeOverThreshold

OID (numeric): 1.3.6.1.4.1.2011.10.8.3.3.1

Node type: NOTIFICATION-TYPE

Description: It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold.

The over threshold situations is specified as below. 1. Probe time(equals to RTT for some type of tests) is not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit. 2. The probe time is accumulatively not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit for a number of times specified in h3cNqaReactThresholdAccumNum. 3. The probe time is consecutively in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit for a number of times specified in h3cNqaReactThresholdConsecNum.

This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is not h3cNqajitter.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' H3C-NQA-MIB::h3cNqaProbeTimeOverThreshold
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.2011.10.8.3.3.1

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:58651->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (68882203) 7 days, 23:20:22.03
  SNMPv2-MIB::snmpTrapOID.0 = OID: H3C-NQA-MIB::h3cNqaProbeTimeOverThreshold

Start monitoring H3C router/switch (NQA active network quality testing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the H3C-NQA-MIB::h3cNqaProbeTimeOverThreshold OID value, configure state conditions and alerts, and monitor any H3C router/switch (NQA active network quality testing) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.2011	huawei	EXPERTV2-MIB
1.3.6.1.4.1.2011.10	h3c	HUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.10.8	h3cRhw	HUAWEI-3COM-OID-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.2011.10.8.3	h3cNqa	H3C-NQA-MIB
1.3.6.1.4.1.2011.10.8.3.3	h3cNqaNotifications	H3C-NQA-MIB
1.3.6.1.4.1.2011.10.8.3.3.1	h3cNqaProbeTimeOverThreshold	H3C-NQA-MIB

H3C-NQA-MIB :: h3cNqaProbeTimeOverThreshold

h3cNqaProbeTimeOverThreshold

Module

This MIB depends on