GBNPlatformOAM-MIB

All MIBs › GBNPlatformOAM-MIB

Organization: Greentech

Last Updated: 2000-11-02

Category: Domain: Network Management, Vendor: Greentech

Description: Greentech platform OAM MIB for operations, administration, and maintenance functions on managed network devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is GBNPlatformOAM-MIB?

GBNPlatformOAM-MIB is a Greentech (GBN) enterprise MIB providing common Operations, Administration, and Maintenance (OAM) functionality shared across the vendor's managed network device platforms. As a common/platform-level OAM module it typically defines a base framework for device management rather than one specific feature, and such shared modules commonly expose baseline hardware/software status like general fault/alarm reporting and basic configuration-management hooks used by higher-layer product MIBs. GBNPlatformOAM-MIB SNMP monitoring in practice would likely mean polling whatever baseline alarm and identification objects this common OAM framework provides, though the exact object names could not be confirmed here. It likely underlies more specific GBN product MIBs that extend its OAM framework for particular device types. It is deployed across Greentech's managed network device product line for general device administration and fault handling.

IPNetwork Monitor allows you to monitor SNMP objects defined in GBNPlatformOAM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Greentech (GBN) managed network devices

Monitoring Examples

No sample_objects were provided for this module, so specific object/table names can't be cited; as a "Common Enterprise MIB" per its stated purpose, it likely provides shared OAM building blocks (e.g. generic alarm/system-identification objects) reused by other GBN product-specific MIBs, though this is inferred from its stated role rather than confirmed data.

Imported Objects

From GREENTECH-MASTER-MIB

gbnPlatform

OBJECT-IDENTITY

From Q-BRIDGE-MIB

PortList
dot1qStaticMulticastEntry	OBJECT-TYPE

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using cpuIdle OID:

Select a Greentech (GBN) managed network device as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cpuIdle into the Find box to locate it in the OID tree, then select it and click OK. It reports the percentage of CPU currently idle (free) on the device. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if idle CPU drops below 15% (i.e. utilization above 85%), indicating the system is approaching CPU exhaustion. Click Finish to create the monitor; you can adjust any parameter later.

See also: memoryIdle

OIDs

OID symbolic	OID numeric	Type	Access	Description
STR bootromVersion	1.3.6.1.4.1.13464.1.2.1.1.2.9	DisplayString	read-only	Bootrom version, the format is V2.0
U32 clockTime	1.3.6.1.4.1.13464.1.2.1.1.2.14.1	Unsigned32	read-write	The current calendar time in seconds. The based time is 1979/1/1. Year of the date must be the number between 2000 and 2099
IP controlIpAddress	1.3.6.1.4.1.13464.1.2.1.1.3.1.1.1	IpAddress	read-only	The accessible ip address of the switch
IP controlIpMask	1.3.6.1.4.1.13464.1.2.1.1.3.1.1.2	IpAddress	read-only	The accessible ip address mask of the switch, wildcard supports mask and unmask
INT controlStatus	1.3.6.1.4.1.13464.1.2.1.1.3.1.1.4	INTEGER	read-write	IP address control status, active(1) means adding the ip address to list, destroy(2) means deleting the ip address from list
INT controlTeminal	1.3.6.1.4.1.13464.1.2.1.1.3.1.1.3	INTEGER	read-only	The client type connected to switch, snmp(1) means connecting switch by SNMP, web(2) means connecting switch by WEB, telnet(3) means connecting switch by telnet.
T/F cpuBusyAlarmEnable	1.3.6.1.4.1.13464.1.2.1.1.2.21	TruthValue	read-write	the enable status of cpu busy alarm.
T/F cpuBusyStatus	1.3.6.1.4.1.13464.1.2.1.1.2.20	TruthValue	read-only	CPU busy status
INT cpuBusyThreshold	1.3.6.1.4.1.13464.1.2.1.1.2.22	INTEGER	read-write	CPU busy threshold.
NTF cpuBusyTrap	1.3.6.1.4.1.13464.1.2.1.1.2.24.1			cpu busy trap.
STR cpuDescription	1.3.6.1.4.1.13464.1.2.1.1.2.5	DisplayString	read-only	System CPU description, the format is Mips 32334, 133MHz
INT cpuIdleEx	1.3.6.1.4.1.13464.1.2.1.1.2.11	INTEGER	read-only	The percentage of free CPU in the current system.
cpuStatusTrap	1.3.6.1.4.1.13464.1.2.1.1.2.24
I32 cpuUnbusyThreshold	1.3.6.1.4.1.13464.1.2.1.1.2.23	Integer32	read-write	CPU unbusy threshold.
NTF cpuUnbusyTrap	1.3.6.1.4.1.13464.1.2.1.1.2.24.2			cpu unbusy trap.
I32 discardBpdu	1.3.6.1.4.1.13464.1.2.1.1.10.4	Integer32	read-write	The global enable status of port discard BPDU.
STR flashDescription	1.3.6.1.4.1.13464.1.2.1.1.2.7	DisplayString	read-only	System Flash description, the format is 4096k
gbnPlatformOAM	1.3.6.1.4.1.13464.1.2.1.1			Gbn Common Enterprise MIB definition.
gbnPlatformOAMIpAccessControl	1.3.6.1.4.1.13464.1.2.1.1.3
gbnPlatformOAMMailalarm	1.3.6.1.4.1.13464.1.2.1.1.12
gbnPlatformOAMMuser	1.3.6.1.4.1.13464.1.2.1.1.5
gbnPlatformOAMPortCar	1.3.6.1.4.1.13464.1.2.1.1.10
gbnPlatformOAMSnmp	1.3.6.1.4.1.13464.1.2.1.1.7
gbnPlatformOAMSnmpNotifyType	1.3.6.1.4.1.13464.1.2.1.1.7.3
gbnPlatformOAMSntpClient	1.3.6.1.4.1.13464.1.2.1.1.8
gbnPlatformOAMSsh	1.3.6.1.4.1.13464.1.2.1.1.11
gbnPlatformOAMSysIf	1.3.6.1.4.1.13464.1.2.1.1.1
gbnPlatformOAMSyslog	1.3.6.1.4.1.13464.1.2.1.1.9
gbnPlatformOAMSystem	1.3.6.1.4.1.13464.1.2.1.1.2
gbnPlatformOAMUpDownLoad	1.3.6.1.4.1.13464.1.2.1.1.6
gbnPlatformOAMVctRun	1.3.6.1.4.1.13464.1.2.1.1.13
gbnPlatformOAMVctRunResult	1.3.6.1.4.1.13464.1.2.1.1.14
gbnPlatformOAMWatchDog	1.3.6.1.4.1.13464.1.2.1.1.4
STR hardwareVersion	1.3.6.1.4.1.13464.1.2.1.1.2.8	DisplayString	read-only	Hardware version, the format is V3.0
STR hostName	1.3.6.1.4.1.13464.1.2.1.1.2.10	DisplayString	read-write	System host name
ipAccessControlEntry	1.3.6.1.4.1.13464.1.2.1.1.3.1.1		not-accessible	IP address access control entry.
ipAccessControlTable	1.3.6.1.4.1.13464.1.2.1.1.3.1		not-accessible	IP address access control table.
INT loadExecute	1.3.6.1.4.1.13464.1.2.1.1.6.4	INTEGER	read-write	Execute file download or upload procedure. A SET of this object starts the load procedure. Note that the Application and Boot images can only be downloaded. The NVM Configuration file can be uploaded and downloaded. A GET of this object will return the status of the executed operation. Use 'gbnCommonLoadExecuteStatus' to determine the status of the executed load.
INT loadExecuteStatus	1.3.6.1.4.1.13464.1.2.1.1.6.5	INTEGER	read-only	Provides status on the execute file load progress.
IP loadFtpAddress	1.3.6.1.4.1.13464.1.2.1.1.6.6	IpAddress	read-write	DURABLE: The IP Address for the FTP server used for downloading and/or uploading files.
STR loadFtpFileName	1.3.6.1.4.1.13464.1.2.1.1.6.7	DisplayString	read-write	DURABLE: The FTP file path and name.
STR loadFtpUserName	1.3.6.1.4.1.13464.1.2.1.1.6.8	DisplayString	read-write	DURABLE: The FTP user name.
STR loadFtpUserPassword	1.3.6.1.4.1.13464.1.2.1.1.6.9	DisplayString	read-write	DURABLE: The FTP user password.
IP loadTftpAddress	1.3.6.1.4.1.13464.1.2.1.1.6.1	IpAddress	read-write	DURABLE: The IP Address for the TFTP server used for downloading and/or uploading files.
STR loadTftpFileName	1.3.6.1.4.1.13464.1.2.1.1.6.2	DisplayString	read-write	DURABLE: The TFTP file path and name.
INT loadType	1.3.6.1.4.1.13464.1.2.1.1.6.3	INTEGER	read-write	DURABLE: { application } The type of file to download or upload upon an 'gbnCommonLoadExecute'. application:program file of the switch configuration:configuration file,should be uploaded before you download it. miccode:microcode is the program file of vdsl chip. removed during the boot Flash write operation, the agent cannot be recovered).
INT manageUserAuthChallegeType	1.3.6.1.4.1.13464.1.2.1.1.5.4	INTEGER	read-write	Radius authentication method1:CHAP, 2:PAP.
STR manageUserAuthenRadiusName	1.3.6.1.4.1.13464.1.2.1.1.5.3	DisplayString	read-write	radius server name.
INT manageUserAuthenType	1.3.6.1.4.1.13464.1.2.1.1.5.2	INTEGER	read-write	Authentication method 1:local, 2:radius, 3:radius first and then local after failed,4:tacacsplus,5:tacacsplus first, and then local after failed.
T/F manageUserTacacsAccount	1.3.6.1.4.1.13464.1.2.1.1.5.6	TruthValue	read-write	accounting after authorization.
T/F manageUserTacacsAuthor	1.3.6.1.4.1.13464.1.2.1.1.5.5	TruthValue	read-write	authorization afer authenticastion.
I32 memoryIdleEx	1.3.6.1.4.1.13464.1.2.1.1.2.13	Integer32	read-only	The current system free memory size, unit is byte.
I32 memorySize	1.3.6.1.4.1.13464.1.2.1.1.2.12	Integer32	read-only	The current system memory size, unit is byte.
musrEntry	1.3.6.1.4.1.13464.1.2.1.1.5.1.1		not-accessible	A list of usr parameters.
I32 musrIndex	1.3.6.1.4.1.13464.1.2.1.1.5.1.1.1	Integer32	not-accessible	A simple index into 'gbnCommonUsrTable'.
STR musrName	1.3.6.1.4.1.13464.1.2.1.1.5.1.1.2	DisplayString	read-write	A simple usrname of gbnCommonUsrEntry.
STR musrPassword	1.3.6.1.4.1.13464.1.2.1.1.5.1.1.3	DisplayString	read-write	A simple password of gbnCommonUsrEntry.
INT musrRowStatus	1.3.6.1.4.1.13464.1.2.1.1.5.1.1.5	INTEGER	read-write	DURABLE: { disable } A simple RowStatus into 'gbnCommonUsrTable'. when 'disable' the user is deleted
musrTable	1.3.6.1.4.1.13464.1.2.1.1.5.1		not-accessible	A Table of usr_name and Password.
INT musrType	1.3.6.1.4.1.13464.1.2.1.1.5.1.1.4	INTEGER	read-write	DURABLE: { NormalUser } A simple UsrType into 'gbnCommonUsrTable'. when 'NomalUser' configuration is limitted
IP nmInterfaceGateAddress	1.3.6.1.4.1.13464.1.2.1.1.2.18.4	IpAddress	read-write	gateway address saved for nm_interface configuration.
INT nmInterfaceId	1.3.6.1.4.1.13464.1.2.1.1.2.18.1	INTEGER	read-write	interface id of vlan saved for nm_interface configuration.
IP nmInterfaceIpAddress	1.3.6.1.4.1.13464.1.2.1.1.2.18.2	IpAddress	read-write	ip address saved for nm_interface configuration.
IP nmInterfaceNetMask	1.3.6.1.4.1.13464.1.2.1.1.2.18.3	IpAddress	read-write	mask saved for nm_interface configuration.
T/F offsetNegFlag	1.3.6.1.4.1.13464.1.2.1.1.2.14.4	TruthValue	read-write	earlier or latter than GMT,it is true when timeZoneOffset is negative
T/F portCarEnable	1.3.6.1.4.1.13464.1.2.1.1.10.1.1.2	TruthValue	read-write	The enable status of the port CAR
portCarEntry	1.3.6.1.4.1.13464.1.2.1.1.10.1.1		not-accessible	A list of port CAR.
T/F portCarGlobalEnable	1.3.6.1.4.1.13464.1.2.1.1.10.2	TruthValue	read-write	The global enable status of port CAR.
I32 portCarOpenTime	1.3.6.1.4.1.13464.1.2.1.1.10.3	Integer32	read-write	The closed port Re-open time.
I32 portCarPort	1.3.6.1.4.1.13464.1.2.1.1.10.1.1.1	Integer32	not-accessible	The port number.
I32 portCarRate	1.3.6.1.4.1.13464.1.2.1.1.10.5	Integer32	read-write	The port CAR max packet receive rate.
I32 portCarRateBpdu	1.3.6.1.4.1.13464.1.2.1.1.10.1.1.4	Integer32	read-write	The port CAR max packet receive rate.
portCarTable	1.3.6.1.4.1.13464.1.2.1.1.10.1		not-accessible	A Table of port CAR.
I32 portDiscardBpdu	1.3.6.1.4.1.13464.1.2.1.1.10.1.1.3	Integer32	read-write	The enable status of the port discard BPDU
STR prodSerialNo	1.3.6.1.4.1.13464.1.2.1.1.2.19	DisplayString	read-only	Product Serial Number
STR productName	1.3.6.1.4.1.13464.1.2.1.1.2.15	DisplayString	read-write	DURABLE: { 'WindRiver gbn Agent' } The product name associated with this agent. This name is displayed on the console screens and Web pages.
saveNMInterfaceConfig	1.3.6.1.4.1.13464.1.2.1.1.2.18
STR sdramDescription	1.3.6.1.4.1.13464.1.2.1.1.2.6	DisplayString	read-only	System Memory description, the format is 32M
STR snmpComm2ViewCommName	1.3.6.1.4.1.13464.1.2.1.1.7.1.1.2	DisplayString	read-create	DURABLE: { 'public','':all } The SNMPv1/v2c community name string. Duplicate community names are not allowed in this table. Note that a null string is not a valid community name (i.e., a null string forces 'gbnCommonComm2ViewRowStatus' to 'notReady(3)').
I32 snmpComm2ViewIndex	1.3.6.1.4.1.13464.1.2.1.1.7.1.1.1	Integer32	not-accessible	A simple index into 'gbnCommonCommunityToViewTable'.
INT snmpComm2ViewPermission	1.3.6.1.4.1.13464.1.2.1.1.7.1.1.4	INTEGER	read-create	DURABLE: { readWrite:all } This object specifies the type of access allowed. 'readOnly(1)' allows GET operations (i.e., GET, GET-NEXT, GET-BULK) and 'readWrite(2)' allows both GET and SET operations.
ROW snmpComm2ViewRowStatus	1.3.6.1.4.1.13464.1.2.1.1.7.1.1.5	RowStatus	read-create	DURABLE: This object indicates the status of this entry. A row in this table can be created using the 'createAndGo(4)' (i.e., all parameters must be valid - supplied in a single SNMP PDU or have default values) or the 'createAndWait(5)' action states. Until all parameters are valid for a conceptual row, this object is 'notReady(3)'. All parameters must be valid before this object can be set to 'active(1)'. Any object in a conceptual row can be modified independent of the value of this object (e.g., can be changed while 'active(1)').
STR snmpComm2ViewViewName	1.3.6.1.4.1.13464.1.2.1.1.7.1.1.3	SnmpAdminString	read-create	DURABLE: { 'internet':all } At runtime (i.e., not when this object is SET), this view name is compared to the 'vacmViewTreeFamilyViewName' in the 'vacmViewTreeFamilyTable' (see RFC2575). If a match is found and the varbind(s) specify valid object type and instance, the 'gbnCommonComm2ViewPermission' privilege is permitted. Note that a null string is not a valid view name value. Also note that the value of this object does not have to match an existing entry in the 'vacmViewTreeFamilyTable' (if no match, no access is allowed). Note that the factory default value for this object is 'internet', which allows access to the subtree under '1.3.6.1'.
snmpCommunityToViewEntry	1.3.6.1.4.1.13464.1.2.1.1.7.1.1		not-accessible	A list of community-to-view parameters.
snmpCommunityToViewTable	1.3.6.1.4.1.13464.1.2.1.1.7.1		not-accessible	A table of SNMPv1/v2c community string to view name mappings.
INT snmpDeleteRemoteEngineTableRow	1.3.6.1.4.1.13464.1.2.1.1.7.5.1.3	INTEGER	read-write	You can delete a row by setting the value to 'deleteRow(1)'.
snmpNotifyTypeEntry	1.3.6.1.4.1.13464.1.2.1.1.7.2.1		not-accessible	A list of notify type parameters.
NTF snmpNotifyTypeSaveConfiguration	1.3.6.1.4.1.13464.1.2.1.1.7.3.1			A private type for traps or informs. It signifies that the SNMPv2 entity have just saved the configuration.
INT snmpNotifyTypeStatus	1.3.6.1.4.1.13464.1.2.1.1.7.2.1.2	INTEGER	read-write	It signifies if the traps with corresponding notify-type can be sent.
snmpNotifyTypeTable	1.3.6.1.4.1.13464.1.2.1.1.7.2		not-accessible	A table of SNMPv1/v2c notify type .
STR snmpPrivateNotifyType	1.3.6.1.4.1.13464.1.2.1.1.7.2.1.1	DisplayString	read-only	notify type.
snmpRemoteEngineEntry	1.3.6.1.4.1.13464.1.2.1.1.7.5.1		not-accessible	A list of remote engine.
STR snmpRemoteEngineID	1.3.6.1.4.1.13464.1.2.1.1.7.5.1.1	DisplayString	not-accessible	The remote engine's id.Note that the engine id can only appear once in the table.
snmpRemoteEngineTable	1.3.6.1.4.1.13464.1.2.1.1.7.5		not-accessible	A table of remote engine .
OCT snmpRemoteHostTAddr	1.3.6.1.4.1.13464.1.2.1.1.7.5.1.2	OCTET STRING	read-write	The ip and port number of remote host.Note that the value including ip and port number can only appear once in the table.
INT snmpTrapSource	1.3.6.1.4.1.13464.1.2.1.1.7.4	INTEGER	read-write	The id of vlan or supervlan which interface traps or informs are sent from belongs to. vlan id: 0-4094; supervlan id: 0-11.
INT snmpTrapSourceType	1.3.6.1.4.1.13464.1.2.1.1.7.6	INTEGER	read-write	The type of the interface which traps or informs are sent from. 1: vlan interface; 2: supervlan interface.
INT softDogProxy	1.3.6.1.4.1.13464.1.2.1.1.4.1	INTEGER	read-write	Enable/disable the soft dog.
STR softwareCompiledTimeC	1.3.6.1.4.1.13464.1.2.1.1.2.4	DisplayString	read-only	Software Compiled time
STR softwareCompiledTimeE	1.3.6.1.4.1.13464.1.2.1.1.2.3	DisplayString	read-only	Software Compiled time displayed in English, the format is Feburary 17 2003 15:47:00
STR softwarePlate	1.3.6.1.4.1.13464.1.2.1.1.2.1	DisplayString	read-only	Software platform used by switches.
STR softwareVersion	1.3.6.1.4.1.13464.1.2.1.1.2.2	DisplayString	read-only	Software version, the format is V100R001B02D06P03SP3
INT sysIfBOOTPOnOff	1.3.6.1.4.1.13464.1.2.1.1.1.7	INTEGER	read-write	DURABLE: { disable } Enable/Disable BOOTP operation for the gbn agent. When 'disable(2)', no BOOTPs are transmitted by the Application. When 'enable(1)', the Application sends BOOTP requests during system startup.
INT sysIfDHCPOnOff	1.3.6.1.4.1.13464.1.2.1.1.1.8	INTEGER	read-write	DURABLE: { disable } Enable/Disable DHCP operation for the gbn agent. When 'disable(2)', no DHCPs are transmitted by the Application. When enabled, the Application sends DHCP requests during system startup.
IP sysIfIpAddress	1.3.6.1.4.1.13464.1.2.1.1.1.2	IpAddress	read-write	DURABLE: { '00000000'H } The IP Address for sw0 (swEND 0); only applies after reset - see 'gbnCommonMiscReset'.
IP sysIfIPGateAddress	1.3.6.1.4.1.13464.1.2.1.1.1.3	IpAddress	read-write	DURABLE: { '00000000'H } The default Gateway Address (i.e., next hop router) for sw0 (swEND 0); only applies after reset - see 'gbnCommonMiscReset'.
IP sysIfIPNetMask	1.3.6.1.4.1.13464.1.2.1.1.1.4	IpAddress	read-write	DURABLE: { 'ffffff00'H } The IP NetMask for sw0 (swEND 0); only applies after reset - see 'gbnCommonMiscReset'.
INT sysIfIPStatus	1.3.6.1.4.1.13464.1.2.1.1.1.5	INTEGER	read-write	This object is used to synchronize the modification of the IP parameters used by the protocol stack based on the gbnCommonIP MIB objects. This allows the user to change gbnCommonIPMACAddr, gbnCommonIPIpAddress, gbnCommonIPGateAddress, and gbnCommonIPNetMask, and then apply the changes to the unit using apply(4). If gbnCommonIPStatus returns notModified(1), no modifications were made to any gbnCommonIP MIB objects. If gbnCommonIPStatus returns modified(2), one or more objects were changed, but have not been applied. Both notModified(1) and modified(2) are read-only values; the agent returns a SNMP_BADVALUE for sets using these values. Both restore(3) and apply(4) are valid SET values. If one or more of the gbnCommonIP objects were modified, the user can restore the parameters to a mirror of the NVM values using restore(3).
MAC sysIfMACAddr	1.3.6.1.4.1.13464.1.2.1.1.1.1	MacAddress	read-write	DURABLE: { '000000000000'H } The base (i.e., first) MAC address used by the gbn agent for its in-band ports.
sysIfManageVLANEntry	1.3.6.1.4.1.13464.1.2.1.1.1.9.1		not-accessible	ManageVlan entry
ROW sysIfManageVLANRowStatus	1.3.6.1.4.1.13464.1.2.1.1.1.9.1.2	RowStatus	read-write	ManageVLAN status
sysIfManageVLANTbale	1.3.6.1.4.1.13464.1.2.1.1.1.9		not-accessible	ManageVlan table
INT sysIfManageVLANVid	1.3.6.1.4.1.13464.1.2.1.1.1.9.1.1	INTEGER	read-only	ManageVLAN-ID, as an index, the maximum number is 26.
systemClock	1.3.6.1.4.1.13464.1.2.1.1.2.14
INT systemReset	1.3.6.1.4.1.13464.1.2.1.1.2.16	INTEGER	read-write	Physically performs a hardware reset of the unit. Use with care. A 'reset(2)' resets the unit, a 'resetToDefaults(3)' resets the NVM configuration to factory defaults and then resets the unit, and 'noop(1)' does nothing. A value of 'noop(1)' is always returned for a GET operation.
STR timeZoneName	1.3.6.1.4.1.13464.1.2.1.1.2.14.2	DisplayString	read-write	the timezone name,1-32 letters.
I32 timeZoneOffset	1.3.6.1.4.1.13464.1.2.1.1.2.14.3	Integer32	read-write	seconds between current timezone and GMT
T/F vctAutoRunEnable	1.3.6.1.4.1.13464.1.2.1.1.13.1.1.3	TruthValue	read-write	The enable status of the VCT auto run
T/F vctAutoRunGlobalEnable	1.3.6.1.4.1.13464.1.2.1.1.13.2	TruthValue	read-write	The global enable status of VCT auto run.
T/F vctRunEnable	1.3.6.1.4.1.13464.1.2.1.1.13.1.1.2	TruthValue	read-write	The enable status of the VCT run
vctRunEntry	1.3.6.1.4.1.13464.1.2.1.1.13.1.1		not-accessible	A list of VCT run.
I32 vctRunPort	1.3.6.1.4.1.13464.1.2.1.1.13.1.1.1	Integer32	not-accessible	The port number.
vctRunResultEntry	1.3.6.1.4.1.13464.1.2.1.1.14.1.1		not-accessible	A list of VCT run result.
I32 vctRunResultErrorLocation	1.3.6.1.4.1.13464.1.2.1.1.14.1.1.4	Integer32	read-only	The error location of the VCT run result
I32 vctRunResultPort	1.3.6.1.4.1.13464.1.2.1.1.14.1.1.1	Integer32	not-accessible	The port number.
VCT vctRunResultStatus	1.3.6.1.4.1.13464.1.2.1.1.14.1.1.3	VctRunResultStatusType	read-only	The status of the VCT run result
vctRunResultTable	1.3.6.1.4.1.13464.1.2.1.1.14.1		not-accessible	A Table of VCT run result.
VCT vctRunResultTxRxPairNo	1.3.6.1.4.1.13464.1.2.1.1.14.1.1.2	VctRunResultTxRxPairNoType	not-accessible	The tx rx pair NO.
vctRunTable	1.3.6.1.4.1.13464.1.2.1.1.13.1		not-accessible	A Table of VCT run.
INT writeConfig	1.3.6.1.4.1.13464.1.2.1.1.2.17	INTEGER	read-write	When set to 'save(2)', config file is saved to NVM (Nonvolatile Memory). NVM save operations may be slow (e.g., erasing/writing Flash device). Consequently, all or many updates should be made before saving to NVM. Note that the SNMP set to 'save(2)' returns immediately to the caller. Gets on this object then return 'saveInProgress(3)' until the save operation completes, at which time 'noop(1)' is returned if the save operation is succeeded, otherwise 'saveFailed(4)' is returned. Consequently, a get operation always returns 'noop(1)', 'saveInProgress(3)' or 'saveFailed(4) depending on the current state and the result of the save operation. The agent returns 'badValue' for SNMPv1 or 'inconsistentValue' for SNMPv2c/v3 for a set to 'Save(2)' while the current get state is 'saveInProgress(3)'. Attempts to set this object to 'saveInProgress(3)' or 'saveFailed(4)' returns 'badValue' for SNMPv1 or 'wrongValue' for SNMPv2c/v3.
INT writeNMInterfaceConifig	1.3.6.1.4.1.13464.1.2.1.1.2.18.5	INTEGER	read-write	We save the nm_interface configuration through setting this Mib. When setting to 'saveNmconfig(1)', nm_interface configuration is starting to be saved. At the same time the value of writeNMInterfaceConifigStatus Mib is set to 'saveInProgress(2)'. Then the value of nmInterfaceId, nmInterfaceIpAddress, nmInterfaceNetMask, nmInterfaceGateAddress will be read one by one.According to these value, the nm_interface configuration is to be saved. Untill the process was over the value of writeNMInterfaceConifigStatus Mib is changed to 'saveSuccess(1)'. And if the process was ended for exception the value of writeNMInterfaceConifigStatus Mib is set to a error code from 'saveFailed(3)' to 'invalidIpOrMask(11)'.
INT writeNMInterfaceConifigStatus	1.3.6.1.4.1.13464.1.2.1.1.2.18.6	INTEGER	read-only	Reserve the status of process in saving Nmconfig.

RFC description

GBN enterprise platform OAM (Operations, Administration, Maintenance) management objects.

Start monitoring Unidentified device (Greentech/GBN common OAM framework) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download GBNPlatformOAM-MIB

What Is GBNPlatformOAM-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

How to Use in IPNetwork Monitor

RFC description