All MIBs › GBNPlatformOAM-MIB › sysIfIPStatus
sysIfIPStatus
Module: GBNPlatformOAM-MIB
OID (symbolic): GBNPlatformOAM-MIB::sysIfIPStatus
OID (numeric): 1.3.6.1.4.1.13464.1.2.1.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to synchronize the modification of the IP parameters used by the protocol stack based on the gbnCommonIP MIB objects. This allows the user to change gbnCommonIPMACAddr, gbnCommonIPIpAddress, gbnCommonIPGateAddress, and gbnCommonIPNetMask, and then apply the changes to the unit using apply(4). If gbnCommonIPStatus returns notModified(1), no modifications were made to any gbnCommonIP MIB objects. If gbnCommonIPStatus returns modified(2), one or more objects were changed, but have not been applied. Both notModified(1) and modified(2) are read-only values; the agent returns a SNMP_BADVALUE for sets using these values. Both restore(3) and apply(4) are valid SET values. If one or more of the gbnCommonIP objects were modified, the user can restore the parameters to a mirror of the NVM values using restore(3).
What is sysIfIPStatus?
This read-write object synchronizes changes to the sysIf IP settings (MAC, IP address, gateway, netmask): it reads back notModified(1) if nothing has changed, modified(2) if pending edits exist, and accepts a SET of restore(3) to discard pending edits or apply(4) to commit them to the unit. An admin sets several IP-related objects first, then sets this to apply(4) as the final step to push them all into effect at once.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.13464.1.2.1.1.1.5 snmpwalk -v2c -c public <target> GBNPlatformOAM-MIB::sysIfIPStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.13464.1.2.1.1.1.5.1 snmpget -v2c -c public <target> GBNPlatformOAM-MIB::sysIfIPStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.13464.1.2.1.1.1.5.1 i <value>
Start monitoring Unidentified device (Greentech/GBN common OAM framework) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GBNPlatformOAM-MIB::sysIfIPStatus OID value, configure state conditions and alerts, and monitor any Unidentified device (Greentech/GBN common OAM framework) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.13464 | admin | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1 | dataCom | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1.2 | gbn | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1.2.1 | gbnPlatform | ADMIN-MASTER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.13464.1.2.1.1 | gbnPlatformOAM | GBNPlatformOAM-MIB |
| 1.3.6.1.4.1.13464.1.2.1.1.1 | gbnPlatformOAMSysIf | GBNPlatformOAM-MIB |
| 1.3.6.1.4.1.13464.1.2.1.1.1.5 | sysIfIPStatus | GBNPlatformOAM-MIB |