| OID symbolic | OID numeric | Type | Access | Description |
|---|
| swGeneralMgmtMIB | 1.3.6.1.4.1.171.10.127.1.20 | | | The structure of general management information for enterprise. |
| swGenMgmtNotifications | 1.3.6.1.4.1.171.10.127.1.20.0 | | | |
| swGenMgmtMIBObjects | 1.3.6.1.4.1.171.10.127.1.20.1 | | | |
| swGenMgmtGroup | 1.3.6.1.4.1.171.10.127.1.20.1.1 | | | |
| swGenFileSystemMgmt | 1.3.6.1.4.1.171.10.127.1.20.1.1.1 | | | |
| swGenFileSystemMgmtTable | 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1 | | not-accessible | A list of MIB File System Basic Configuration entries supported
by the file update of this agent. |
| swGenFileSystemMgmtEntry | 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1 | | not-accessible | A File System basic configuration entry that contains objects
describing a particular MIB supported by this agent. |
| INT swGenFileSystemMgmtIndex | 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.1 | INTEGER | not-accessible | The table index for the file entry.
This object describes the file type.
runtime-code (1),
cfg-file (2),
log-file (3) |
| STR swGenFileSystemMgmtDscr | 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.2 | DisplayString | read-only | The description of the software file purpose in this entry. |
| IPt swGenFileSystemMgmtServerAddrType | 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.3 | InetAddressType | read-write | The address type where the file to be downloaded is located, or the address type
where the file will be uploaded to. |
| IP swGenFileSystemMgmtServerAddr | 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.4 | InetAddress | read-write | The address where the file is to be downloaded from or uploaded to. |
| STR swGenFileSystemMgmtInterfaceName | 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.5 | DisplayString | read-write | This node is used to specify the interface name when swGenFileSystemMgmtServerAddr
is the local link address. |
| INT swGenFileSystemMgmtTranserProtocol | 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.10 | INTEGER | read-write | The file transfer protocol. |
| STR swGenFileSystemMgmtUserName | 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.11 | DisplayString | read-write | The user name to access the server. |
| STR swGenFileSystemMgmtPassword | 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.12 | DisplayString | read-write | The password to access the server. |
| STR swGenFileSystemMgmtServerFileName | 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.20 | DisplayString | read-write | The name of the file to be downloaded from or uploaded to the server. |
| STR swGenFileSystemMgmtDeviceFileName | 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.21 | DisplayString | read-write | The name of the file to be downloaded to the device, or uploaded from the
device. When downloading or uploading, the swGenFileSystemMgmtServerFileName object must also be set. |
| INT swGenFileSystemMgmtLoadType | 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.30 | INTEGER | read-write | This object allows the user to select a download or upload function for the file.
Note:
For systems that do not support changes to this object, setting a value for
this object will cause the system to return a bad-value error message. |
| INT swGenFileSystemMgmtCtrl | 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.100 | INTEGER | read-write | This object allows the user to download runtime software. The settings will take
effect when the system restarts. See Note (1) below
Note 1:
For systems which do not support value changes to this object,
setting these values will cause the system to return a bad-value error message.
start (3) - activate firmware. |
| swGenFileSystemBootupFileMgmtTable | 1.3.6.1.4.1.171.10.127.1.20.1.1.5 | | not-accessible | This table indicates the information about the bootup files. |
| swGenFileSystemBootupFileMgmtEntry | 1.3.6.1.4.1.171.10.127.1.20.1.1.5.1 | | not-accessible | A list of information about the bootup files for each unit of the switch stack. |
| INT swGenMgmtUnitID | 1.3.6.1.4.1.171.10.127.1.20.1.1.5.1.1 | INTEGER | not-accessible | The object indicates the unit ID. |
| STR swGenFileSystemBootImage | 1.3.6.1.4.1.171.10.127.1.20.1.1.5.1.3 | DisplayString | read-write | When displayed, it shows the current bootup image file name.
When set, the bootup image file with the set name will be set as the bootup image. |
| STR swGenFileSystemBootConfig | 1.3.6.1.4.1.171.10.127.1.20.1.1.5.1.5 | DisplayString | read-write | When displayed, it shows the current bootup configuration file name.
When set, the configuration file with the set name will be set as the bootup configuration. |
| T/F swGenFileSystemActiveConfigIncrement | 1.3.6.1.4.1.171.10.127.1.20.1.1.5.1.10 | TruthValue | read-write | If increment is specified, then the existing configuration will not be cleared before applying
of the new configuration. If it is not specified, then the existing configuration will be cleared
before applying of the new configuration.
True : keep valid
False : erase. |
| STR swGenFileSystemActiveConfig | 1.3.6.1.4.1.171.10.127.1.20.1.1.5.1.11 | DisplayString | read-write | When displayed, it shows NULL.
When set, the configuration file with the set name will be active at once, but the set name
will not be set as the bootup configuration. |
| swGenExpansionModuleMgmtTable | 1.3.6.1.4.1.171.10.127.1.20.1.1.8 | | not-accessible | This table indicates the information about the Boot-up Expansion
Module and current Expansion Module. |
| swGenExpansionModuleMgmtEntry | 1.3.6.1.4.1.171.10.127.1.20.1.1.8.1 | | not-accessible | A list of information about the bootup files for each unit of the switch stack. |
| INT swGenExpansionModuleMgmtSlotID | 1.3.6.1.4.1.171.10.127.1.20.1.1.8.1.2 | INTEGER | not-accessible | The object indicates the expansion module slot ID. |
| STR swGenExpansionModuleMgmtBootup | 1.3.6.1.4.1.171.10.127.1.20.1.1.8.1.3 | DisplayString | read-only | It displays the expansion module name which the device boot up with.
if no expansion module exist when boot up, it displays 'none'. |
| STR swGenExpansionModuleMgmtCurrent | 1.3.6.1.4.1.171.10.127.1.20.1.1.8.1.4 | DisplayString | read-only | It displays the current exsit expansion module name.
if no expansion module exist, it displays 'none'. |
| OCT swGenExpansionModuleBootupPortModeInfo | 1.3.6.1.4.1.171.10.127.1.20.1.1.8.1.5 | OCTET STRING | read-only | This object is a set of port mode for boot up DXS-3600-EM-4QXS module indications.
Every bytes are presented to a port of the DXS-3600-EM-4QXS, if the module
is not DXS-3600-EM-4QXS, cannot get any value.
Port mode:
01 = 4*10G.
02 = 40G. |
| OCT swGenExpansionModuleCurrentPortModeMGT | 1.3.6.1.4.1.171.10.127.1.20.1.1.8.1.6 | OCTET STRING | read-write | This object is a set of port mode for current insert DXS-3600-EM-4QXS
module indications. Every bytes are presented to a port of
the DXS-3600-EM-4QXS, it will not write to Equipped module until excute save configuration.
Port mode:
01 = 4*10G.
02 = 40G. |
| OCT swGenExpansionModuleEquippedModulePortMode | 1.3.6.1.4.1.171.10.127.1.20.1.1.8.1.7 | OCTET STRING | read-only | This object is a set of port mode for current insert DXS-3600-EM-4QXS
module indications. Every bytes are presented to a port of
the DXS-3600-EM-4QXS, if the module boot up with and current insert
is not DXS-3600-EM-4QXS, cannot set the port mode management value to Equipped module.
Port mode:
01 = 4*10G.
02 = 40G. |
| INT swGenMgmtReboot | 1.3.6.1.4.1.171.10.127.1.20.1.1.10 | INTEGER | read-write | Used to restart the switch. |
| STR swGenMgmtSaveConfigFileName | 1.3.6.1.4.1.171.10.127.1.20.1.1.11 | DisplayString | read-write | The name of the configuration file that will be saved to the device.
When swGenMgmtSave is set to configuration(2):
If the swGenMgmtSaveConfigFileName is no NULL, the configuration file will be saved to the set file name.
If NULL, the configuration file will be saved to the start-up configuration file. |
| INT swGenMgmtSave | 1.3.6.1.4.1.171.10.127.1.20.1.1.12 | INTEGER | read-write | This indicates the method of saving information to the NV-RAM of the device.
other(1) - No action.
configuration(2) - Save configuration.
log(3) - Save log.
all(4) - Save both ( active configuration and log). |
