All MIBs › GBNPlatformOAM-MIB › writeNMInterfaceConifig
writeNMInterfaceConifig
Module: GBNPlatformOAM-MIB
OID (symbolic): GBNPlatformOAM-MIB::writeNMInterfaceConifig
OID (numeric): 1.3.6.1.4.1.13464.1.2.1.1.2.18.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: We save the nm_interface configuration through setting this Mib. When setting to 'saveNmconfig(1)', nm_interface configuration is starting to be saved. At the same time the value of writeNMInterfaceConifigStatus Mib is set to 'saveInProgress(2)'. Then the value of nmInterfaceId, nmInterfaceIpAddress, nmInterfaceNetMask, nmInterfaceGateAddress will be read one by one.According to these value, the nm_interface configuration is to be saved. Untill the process was over the value of writeNMInterfaceConifigStatus Mib is changed to 'saveSuccess(1)'. And if the process was ended for exception the value of writeNMInterfaceConifigStatus Mib is set to a error code from 'saveFailed(3)' to 'invalidIpOrMask(11)'.
What is writeNMInterfaceConifig?
Setting this write object to saveNmconfig(1) starts saving the nm_interface configuration: the switch marks writeNMInterfaceConifigStatus as saveInProgress(2), reads back nmInterfaceId/IpAddress/NetMask/GateAddress one by one, and applies them, finishing with saveSuccess(1) or an error code up to invalidIpOrMask(11) on failure. An admin uses this as the trigger step after populating the individual nm_interface fields, then polls writeNMInterfaceConifigStatus to confirm the save succeeded.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.13464.1.2.1.1.2.18.5 snmpwalk -v2c -c public <target> GBNPlatformOAM-MIB::writeNMInterfaceConifig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.13464.1.2.1.1.2.18.5.1 snmpget -v2c -c public <target> GBNPlatformOAM-MIB::writeNMInterfaceConifig.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.13464.1.2.1.1.2.18.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> writeNMInterfaceConifig.1
Start monitoring Unidentified device (Greentech/GBN common OAM framework) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GBNPlatformOAM-MIB::writeNMInterfaceConifig OID value, configure state conditions and alerts, and monitor any Unidentified device (Greentech/GBN common OAM framework) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.13464 | admin | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1 | dataCom | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1.2 | gbn | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1.2.1 | gbnPlatform | ADMIN-MASTER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.13464.1.2.1.1 | gbnPlatformOAM | GBNPlatformOAM-MIB |
| 1.3.6.1.4.1.13464.1.2.1.1.2 | gbnPlatformOAMSystem | GBNPlatformOAM-MIB |
| 1.3.6.1.4.1.13464.1.2.1.1.2.18 | saveNMInterfaceConfig | GBNPlatformOAM-MIB |
| 1.3.6.1.4.1.13464.1.2.1.1.2.18.5 | writeNMInterfaceConifig | GBNPlatformOAM-MIB |