FNET-OPTIVIEW-WAN-MIB

All MIBs › FNET-OPTIVIEW-WAN-MIB

Category: Domain: WAN/TDM, Vendor: Fluke Networks

Description: Fluke Networks OptiView WAN analyzer MIB providing SNMP objects for monitoring ATM, Frame Relay, T1/E1, and SONET WAN interfaces.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FNET-OPTIVIEW-WAN-MIB?

FNET-OPTIVIEW-WAN-MIB is a Fluke Networks MIB for the OptiView WAN Fiber/Copper analyzer family, defining SMIv1 TRAP-TYPE notifications (values 12000-12030) rather than managed objects - the analyzer itself generates these traps as it passively monitors WAN circuits. It covers SONET/SDH link and error conditions (probSonetLinkDown, probSonetErrors, probSonetAlarms), ATM cell-layer problems (probAtmLinkDown, probAtmErrors, probPDUCRCErrors), Frame Relay/LMI issues (probFrLmiLinkDown, probFrLmiErrors, probVcDown, probInvalidDlci, probFrDEUnderCIRUtilization), HDLC/PPP framing errors, and T1/E1/T3/E3 (DS1/DS3) alarm and error-second traps, plus management-plane events like probDNSServerNoResp, probLostDHCPLease, probDefaultRouterNoResp and probKeyDevPingLatency. Every trap follows a discovered/resolved pattern via the imported ovTrapStatus object, so a condition trap fires once when a threshold is crossed and again when it clears. It's deployed as part of a Fluke Networks OptiView WAN probe/analyzer appliance tapped into a carrier or enterprise WAN circuit, and test engineers can grab the FNET-OPTIVIEW-WAN-MIB download to decode these traps in their NMS.

IPNetwork Monitor allows you to monitor SNMP objects defined in FNET-OPTIVIEW-WAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Fluke Networks OptiView WAN Fiber/Copper analyzer/probe family

Monitoring Examples

An operator watches for probSonetErrors or probDS1Errors traps with ovTrapStatus=discovered on a monitored circuit; a probFrLmiLinkDown trap that never receives its matching resolved counterpart indicates the Frame Relay LMI session has stayed down rather than recovering, pointing to a persistent carrier-side outage.

What Can Be Monitored

SONET/SDH line and path error/alarm traps
ATM cell delineation and HEC error traps
Frame Relay LMI status and DLCI validity traps
T1/E1/T3/E3 (DS1/DS3) error-second and alarm traps
link utilization and key-device ping latency traps
DNS/DHCP/default-router reachability traps

Imported Objects

From FNET-GLOBAL-REG

fnetOptiViewGeneric

OBJECT-IDENTITY

From FNET-OPTIVIEW-GENERIC-MIB

ovTrapAgentSysName	OBJECT-TYPE
ovTrapDescription	OBJECT-TYPE
ovTrapOffenderName	OBJECT-TYPE
ovTrapOffenderNetAddr	OBJECT-TYPE
ovTrapOffenderSubId	OBJECT-TYPE
ovTrapSeverity	OBJECT-TYPE
ovTrapStatus	OBJECT-TYPE

From RFC-1215

TRAP-TYPE

OIDs

OID symbolic	OID numeric	Description
NTF probSonetLinkDown	1.3.6.1.4.1.1226.2.1.0.12000	Monitor the contiguous Line Unavailable or Path Unavailable seconds on the Sonet link. When the count equals or exceeds the rising threshold, the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the count descends back below the falling threshold the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probSonetErrors	1.3.6.1.4.1.1226.2.1.0.12001	Monitor the count of contiguous Sonet Line Errored seconds or Severely Errored seconds. When the count equals or exceeds the rising threshold, the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the count descends back below the falling threshold the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probSonetAlarms	1.3.6.1.4.1.1226.2.1.0.12002	Monitor the presence of Sonet alarms. When the count equals or exceeds the rising threshold, the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the count descends back below the falling threshold the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probAtmLinkDown	1.3.6.1.4.1.1226.2.1.0.12003	Monitor the contiguous Loss of Cell Delineation seconds on the ATM link. When the count equals or exceeds the rising threshold, the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the count descends back below the falling threshold the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probAtmErrors	1.3.6.1.4.1.1226.2.1.0.12004	Monitor the rate of the combination of correctable and uncorrectable HEC errors. When the count equals or exceeds the rising threshold, the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the count descends back below the falling threshold the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probPDUCRCErrors	1.3.6.1.4.1.1226.2.1.0.12005	Monitor the rate of PDU CRC errors. When the count equals or exceeds the rising threshold, the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the count descends back below the falling threshold the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probPosLinkDown	1.3.6.1.4.1.1226.2.1.0.12006	Monitor the contiguous loss of HDLC framing (LOF) seconds. When the count equals or exceeds the rising threshold, the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the count descends back below the falling threshold the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probPosErrorsDetected	1.3.6.1.4.1.1226.2.1.0.12007	Monitor the percentage of bad HDLC frames on the Pos link. When the count equals or exceeds the rising threshold, the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the count descends back below the falling threshold the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probLinkUtilization	1.3.6.1.4.1.1226.2.1.0.12008	Monitor the utilization of the entire pipe bandwidth. When the count equals or exceeds the rising threshold, the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the count descends back below the falling threshold the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probDNSServerNoResp	1.3.6.1.4.1.1226.2.1.0.12009	Monitor the status of the DNS server. When the management port receives no DNS reply from the server address configured via DHCP, and no DNS reply from either the primary or secondary servers statically configured by the user, and there was no reply to a broadcast message for a local DNS server, a trap is generated with ovTrapStatus=discovered. When the user causes a DNS server to be rediscovered via DHCP, or configures a valid primary or secondary servier statically, a trap is generated with ovTrapStatus=resolved.
NTF probDNSServerNowUsing	1.3.6.1.4.1.1226.2.1.0.12010	Monitor the status of the DNS server. When the management port receives no DNS reply from the server address configured via DHCP, and no DNS reply from either the primary or secondary servers statically configured by the user, and there WAS a reply to a broadcast message for a local DNS server, a trap is generated with ovTrapStatus=discovered. When the user causes a DNS server to be rediscovered via DHCP, or statically configures a valid primary or secondary server, a trap is generated with ovTrapStatus=resolved.
NTF probLostDHCPLease	1.3.6.1.4.1.1226.2.1.0.12011	Monitor the status of the management port's DHCP lease. When the lease expires a single trap is generated with ovTrapStatus=discovered. When the default router resumes responding to the PING then a single trap is generated with ovTrapStatus=resolved.
NTF probDefaultRouterNoResp	1.3.6.1.4.1.1226.2.1.0.12012	Monitor PING responses from the default router. When no response is received the proble generates a single trap with ovTrapStatus=discovered. When the default router resumes responding to the PING then a single trap is generated with ovTrapStatus=resolved.
NTF probDiscoveryFull	1.3.6.1.4.1.1226.2.1.0.12013	When the discovery databases are full a single trap is generated with ovTrapStatus=discovered. This indicates new hosts and virtual circuits.will not be added to the discovery database. RMON hosts, conversations, and utilization history will continue to be measured. Perform a rerun test when desired to clear the discovery database.
NTF probClearCounts	1.3.6.1.4.1.1226.2.1.0.12014	When the user clears statistics for a specific measurement, a single trap is generated with ovTrapStatus=discovered, and ovTrapSeverity = inform. The type of statistic (e.g top VC) is indicated in the ovTrapDescription field.
NTF probDS1LinkDown	1.3.6.1.4.1.1226.2.1.0.12015	Monitor the T1/E1 Errors and Alarms. When the count equals or exceeds the rising threshold, the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the count descends back below the falling threshold the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probDS1Errors	1.3.6.1.4.1.1226.2.1.0.12016	Monitor the count of contiguous T1/E1 Errored seconds or Severely Errored seconds. When the count equals or exceeds the rising threshold, the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the count descends back below the falling threshold the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probDS1Alarms	1.3.6.1.4.1.1226.2.1.0.12017	Monitor the presence of T1/E1 alarms. When the count equals or exceeds the rising threshold, the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the count descends back below the falling threshold the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probDS3LinkDown	1.3.6.1.4.1.1226.2.1.0.12018	Monitor the DS1/E3 Errors and Alarms. When the count equals or exceeds the rising threshold, the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the count descends back below the falling threshold the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probDS3Errors	1.3.6.1.4.1.1226.2.1.0.12019	Monitor the count of contiguous DS3/E3 Errored seconds or Severely Errored seconds. When the count equals or exceeds the rising threshold, the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the count descends back below the falling threshold the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probDS3Alarms	1.3.6.1.4.1.1226.2.1.0.12020	Monitor the presence of DS1/E3 alarms. When the count equals or exceeds the rising threshold, the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the count descends back below the falling threshold the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probFrLmiLinkDown	1.3.6.1.4.1.1226.2.1.0.12021	Monitor the contiguous inactive LMI seconds on the Frame Relay link. When the count equals or exceeds the rising threshold, the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the count descends back below the falling threshold the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probFrLmiErrors	1.3.6.1.4.1.1226.2.1.0.12022	Monitor LMI errors on the Frame Relay link. When the LMI errors exist, the Analyzer generates this trap with ovTrapStatus=discovered. When the LMI errors subside, the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probFrErrorsDetected	1.3.6.1.4.1.1226.2.1.0.12023	Monitor the count of contiguous Errored Frame seconds. When the count equals or exceeds the rising threshold, the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the count descends back below the falling threshold the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probVcDown	1.3.6.1.4.1.1226.2.1.0.12024	Monitor the state of Frame Relay VCs. When the PVC status received via the local in-channel signaling reports status = 'deleted' or 'inactive', the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the in-channel signaling reports status = 'active' the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probInvalidDlci	1.3.6.1.4.1.1226.2.1.0.12025	Monitor the state of Frame Relay DLCI for invalid. When the Analyzer receives an inactive or unknown DLCI it generates this trap with ovTrapStatus=discovered. If the full-status LMI later reports the DLCI active, the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probFrDEUnderCIRUtilization	1.3.6.1.4.1.1226.2.1.0.12026	Monitor the utilization of % DE under CIR. When the count equals or exceeds the rising threshold, the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the count descends back below the falling threshold the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probHdlcLinkDown	1.3.6.1.4.1.1226.2.1.0.12027	Monitor the contiguous loss of HDLC framing seconds. When the count equals or exceeds the rising threshold, the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the count descends back below the falling threshold the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probHdlcErrorsDetected	1.3.6.1.4.1.1226.2.1.0.12028	Monitor the percentage of bad HDLC frames. When the count equals or exceeds the rising threshold, the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the count descends back below the falling threshold the Analyzer generates this trap with ovTrapStatus=resolved.
NTF probFrDteDceReversed	1.3.6.1.4.1.1226.2.1.0.12029	WAN cable reversed from LMI discovered DTE/DCR (FR only).
NTF probKeyDevPingLatency	1.3.6.1.4.1.1226.2.1.0.12030	Measures the roundtrip PING latency to a key device. When the count equals or exceeds the rising threshold, the Analyzer generates this trap with ovTrapStatus=discovered. Then, when the count descends back below the falling threshold the Analyzer generates this trap with ovTrapStatus=resolved.

RFC description

Monitors SONET and ATM link events, errors, and alarms on Fluke OptiView WAN probe devices.

Start monitoring Fluke Networks OptiView WAN Fiber/Copper analyzer/probe (SONET/ATM/FR/T-carrier fault traps) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FNET-OPTIVIEW-WAN-MIB

What Is FNET-OPTIVIEW-WAN-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description