All MIBs › FNET-OPTIVIEW-GENERIC-MIB
Category: Vendor: Fluke Networks
Description:
Fluke Networks OptiView generic management MIB providing SNMP objects for the OptiView Integrated Network Analyzer platform.
Imported Objects
From FNET-GLOBAL-REG
| fnetOptiViewGeneric | OBJECT-IDENTITY |
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1213-MIB
| DisplayString |
What Is FNET-OPTIVIEW-GENERIC-MIB?
FNET-OPTIVIEW-GENERIC-MIB is a Fluke Networks module supporting the OptiView Integrated Network Analyzer, a portable/rack-mount appliance used to test and analyze LAN/WAN links. As a 'generic' management MIB it is intended to expose baseline device-level SNMP objects under the FNET-OPTIVIEW-GENERIC-MIB OID subtree for the analyzer platform, though the exact object set is not detailed in the available source data. Consistent with its role, such a module would typically be used to confirm the analyzer appliance's own operational/device status (e.g. that the unit is reachable and functioning) rather than deep environmental sensors, though this cannot be confirmed from the data provided. No explicit dependency on other MIBs is evident from the source, though it likely coexists with standard MIBs (e.g. SNMPv2-MIB) for basic system identity on the analyzer. It is deployed wherever a Fluke Networks OptiView analyzer is used for network troubleshooting and is placed under SNMP management alongside the devices it tests.
IPNetwork Monitor allows you to monitor SNMP objects defined in FNET-OPTIVIEW-GENERIC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Fluke Networks OptiView Integrated Network Analyzer appliance
Monitoring Examples
No object or table names were included in the source data for this module, so no concrete polling scenario can be honestly described; the platform's general purpose suggests basic device identification and status objects for the OptiView analyzer unit, but this can't be verified from the given data.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| NTF ovProbDupIp | 1.3.6.1.4.1.1226.2.1.0.1 | The SNMP trap that is generated when a duplicate IP is detected and generates an event that is configured for sending SNMP traps. | ||
| NTF probBadMask | 1.3.6.1.4.1.1226.2.1.0.2 | Incorrect subnet mask. | ||
| NTF ovProbBadDefRouter | 1.3.6.1.4.1.1226.2.1.0.3 | Default router not responding. | ||
| NTF probLoneIp | 1.3.6.1.4.1.1226.2.1.0.4 | Lone ranger IP subnet. | ||
| NTF probLoneNbDomain | 1.3.6.1.4.1.1226.2.1.0.5 | Lone ranger NetBIOS domain. | ||
| NTF probLoneIpxNet | 1.3.6.1.4.1.1226.2.1.0.6 | Lone ranger IPX network. | ||
| NTF probLoneIpxType | 1.3.6.1.4.1.1226.2.1.0.7 | Lone ranger IPX encaps for a network. | ||
| NTF probKeyDevNoResp | 1.3.6.1.4.1.1226.2.1.0.8 | Key Device not responding. | ||
| NTF probReboot | 1.3.6.1.4.1.1226.2.1.0.9 | ThisOptiview has powered on or rebooted. (ovTrapSeverity = inform) | ||
| NTF probRerunTest | 1.3.6.1.4.1.1226.2.1.0.10 | A user has cleared historical data and started a new test. (ovTrapSeverity = inform) | ||
| ovStdTraps | 1.3.6.1.4.1.1226.2.1.1 | |||
| STR ovTrapAgentSysName | 1.3.6.1.4.1.1226.2.1.1.1 | DisplayString | not-accessible | The System Group name or best name of the agent that generated the trap. |
| OVT ovTrapSeverity | 1.3.6.1.4.1.1226.2.1.1.2 | OvTrapSeverity | not-accessible | Alarm severity information delivered with the trap. Values are critical, major, minor, warning and informational. |
| OVT ovTrapStatus | 1.3.6.1.4.1.1226.2.1.1.3 | OvTrapStatus | not-accessible | Status of the problem being reported. Values are discovered and resolved. |
| STR ovTrapDescription | 1.3.6.1.4.1.1226.2.1.1.4 | DisplayString | not-accessible | The alarm description. Probably the same string as what is shown in the problem log. |
| STR ovTrapOffenderName | 1.3.6.1.4.1.1226.2.1.1.5 | DisplayString | not-accessible | The best name (MAC, IP, DNS or SNMP) of the host that the alarm message is associated to. |
| STR ovTrapOffenderNetAddr | 1.3.6.1.4.1.1226.2.1.1.6 | DisplayString | not-accessible | The network address (IP, IPX, NETBIOS DOMAIN) of the host that the alarm message is associated to. |
| STR ovTrapOffenderPhyAddr | 1.3.6.1.4.1.1226.2.1.1.7 | DisplayString | not-accessible | The MAC address of the host that the alarm message is associated to. |
| INT ovTrapOffenderSubId | 1.3.6.1.4.1.1226.2.1.1.8 | INTEGER | not-accessible | A secondary key to identify the problem instance. This is used when more than one problem of the SAME type can occur on the SAME offender. For example, some problems occur on a particular interface of an offender host. In this case, an NMS station can use the offender information along with this SubId to track the problem. The identifier is arbitrary and managed by the agent. |
RFC description
Nortel-specific generic MIB for optical network management and device parameters via SNMP.
Start monitoring Fluke Networks OptiView Integrated Network Analyzer (generic baseline objects) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.