FLARION-PHYS-MIB

All MIBs › FLARION-PHYS-MIB

Category: Domain: Wireless

Description: Flarion Technologies MIB for physical layer management of Flash-OFDM radio equipment including RF parameters and antenna status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FLARION-PHYS-MIB?

FLARION-PHYS-MIB is a Flarion Technologies (early mobile-broadband/Flash-OFDM vendor, later Qualcomm) proprietary MIB reporting chassis physical inventory. Its objects cover chassis type/revision/max-slots/card count, a chassis-slot table (slot ID, hardware type/name/status/version/ESN, software version), physical chassis type, serial number, production date, part number, hardware version, RF band, assembly ID, a fan table (index, OK flag), and a relay table. As a hardware-status MIB it lets an administrator confirm slot hardware inventory and fan health on a Flarion Technologies (Qualcomm) mobile-broadband chassis. It is deployed on Flarion Technologies (Qualcomm) mobile-broadband base-station equipment. Engineers can download the FLARION-PHYS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in FLARION-PHYS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Flarion Technologies (Qualcomm) mobile-broadband base-station equipment

Monitoring Examples

An administrator checks rrChassisSlotHwStatus and phyFanOk to confirm slot hardware health and fan status on a Flarion Technologies (Qualcomm) base-station chassis.

What Can Be Monitored

chassis slot hardware inventory and fan health

Imported Objects

From FLARION-MIB

AdminState
FloatAsString
MoType
rrBaseBandUnit	OBJECT-IDENTITY
rrManagedObjs	OBJECT-IDENTITY
rrMib	OBJECT-IDENTITY

From RFC1155-SMI

enterprises

From SNMPv2-SMI

Counter32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using paTemperature OID:

Select a Flarion (Qualcomm) Flash-OFDM base-station chassis (hardware inventory/fans) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type paTemperature into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports pA temperature (Celcius). On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the reported value exceeds the level expected for healthy operation, since sustained high temperature often precedes thermal shutdown or hardware degradation. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
bbuSysTable	1.3.6.1.4.1.8603.1.2.1.2.5		not-accessible	Base Band Unit system information.
bbuSysEntry	1.3.6.1.4.1.8603.1.2.1.2.5.1		not-accessible	Base Band Unit system table entry.
INT bbuSysId	1.3.6.1.4.1.8603.1.2.1.2.5.1.1	INTEGER	read-only	This identifies a single BBU in a basestation.
STR bbuDspVer	1.3.6.1.4.1.8603.1.2.1.2.5.1.2	DisplayString	read-only	The read-only statistic indicates the version number of the DSP software currently operational on the sector in question. It has the major.minor.micro notation.
STR bbuLlcVer	1.3.6.1.4.1.8603.1.2.1.2.5.1.3	DisplayString	read-only	The read-only statistic indicates the version number of the Link List Controller software/firmware currently operational on the sector in question. It has the major.minor notation.
STR bbuTxFpgaVer	1.3.6.1.4.1.8603.1.2.1.2.5.1.4	DisplayString	read-only	The read-only statistic indicates the version number of the Tx FPGA software/firmware currently operational on the sector in question. It has the major.minor notation.
STR bbuRxFpgaVer	1.3.6.1.4.1.8603.1.2.1.2.5.1.5	DisplayString	read-only	The read-only statistic indicates the version number of the Rx FPGA software/firmware currently operational on the sector in question. It has the major.minor notation.
U32 bbuLdpcVer	1.3.6.1.4.1.8603.1.2.1.2.5.1.6	Unsigned32	read-only	The read-only statistic indicates the version number of the LDPC encoder/decoder software/firmware currently operational on the sector in question. It has the major.minor notation.
INT bbuRfChanNum	1.3.6.1.4.1.8603.1.2.1.2.5.1.50	INTEGER	read-write	The RF channel number, in conjunction with the bbuRffBand object defines the frequency of operation. The channel number follows well-known ITU numbering, and represents 50 kHz spacing. The step size depends on the band. In the 1.9 GHz band, the step size is 4 (200 kHz). Editable offline.
INT bbuExtGainTx	1.3.6.1.4.1.8603.1.2.1.2.5.1.51	INTEGER	read-write	Represents the total external gain in the Tx path. Typically it equals PA gain minus any attenuators. The value is in dB * 32 (scaled by 32). E.g., default value is 43 dB, which is the PA gain, and is represented as 43*32 = 1376. This parameter is used to assist the mobile in making an access attempt at an appropriate power level. The step size is 1 dB. Editable online.
INT bbuExtGainRx	1.3.6.1.4.1.8603.1.2.1.2.5.1.52	INTEGER	read-write	Represents the total external gain in the Rx path. Typically it equals LNA gain minus any attenuators. The value is in dB * 32 (scaled by 32). E.g., default value is 31 dB, which is the LNA gain, and is represented as 31*32 = 992. This parameter is used to assist the mobile in making an access attempt at an appropriate power level. The step size is 1 dB. Editable online.
INT bbuRfGainRx0	1.3.6.1.4.1.8603.1.2.1.2.5.1.53	INTEGER	read-write	Represents the gain (in dB) provided by the RF Rx blade(RXU) in the Rx0 path. This gain is in addition to the gain provided by the LNA. This value is typically calibrated and set in the factory. The step size is 1 dB. Editable online.
INT bbuRfGainRx1	1.3.6.1.4.1.8603.1.2.1.2.5.1.54	INTEGER	read-write	Represents the gain (in dB) provided by the RF Rx blade(RXU) in the Rx1 path. This gain is in addition to the gain provided by the LNA. This value is typically calibrated and set in the factory. The step size is 1 dB. Editable online.
INT bbuRfBand	1.3.6.1.4.1.8603.1.2.1.2.5.1.55	INTEGER	read-write	The band of operation, represented by an enumeration. E.g., the 1.9 GHz PCS band has a value of 6, while the 2.1 GHz UMTS band has a value of 7. This quantity, in conjunction with the bbuRfChanNum decides the frequency of operation. Editable offline.
INT bbuRfPowerTx0	1.3.6.1.4.1.8603.1.2.1.2.5.1.56	INTEGER	read-write	Represents the signal strength in dBm of the Tx signal put out on Tx0 by the TXU. An increase in this implies an increase in the signal input to the PA. Step size is 1 dBm. Editable online.
INT bbuRfPowerTx1	1.3.6.1.4.1.8603.1.2.1.2.5.1.57	INTEGER	read-write	Represents the signal strength in dBm of the Tx signal put out on Tx1 by the TXU. An increase in this implies an increase in the signal input to the PA. Step size is 1 dBm. Editable online.
INT bbuRfuEnableMask	1.3.6.1.4.1.8603.1.2.1.2.5.1.59	INTEGER	read-write	This is a bit mask to choose between the 0 and 1 channels for Rx and Tx. The value should be an OR of the channels selected, where: Tx0 = 0001 Tx1 = 0010 Rx0 = 0100 Rx1 = 1000 For example, set this object to 6 if Rx0 and Tx1 need to be enabled.
STR bbuExtTxGain	1.3.6.1.4.1.8603.1.2.1.2.5.1.60	FloatAsString	read-write	External Tx gain. Valid range is -50.0 to 70.0.
STR bbuExtRxGain	1.3.6.1.4.1.8603.1.2.1.2.5.1.61	FloatAsString	read-write	External Rx gain. Valid range is -50.0 to 70.0.
STR bbuRfRx0Gain	1.3.6.1.4.1.8603.1.2.1.2.5.1.62	FloatAsString	read-write	Represents the gain (in dB) provided by the RF Rx blade(RXU) in the Rx0 path. This gain is in addition to the gain provided by the LNA. This value is typically calibrated and set in the factory. The step size is 1 dB. Valid range is -10.0 to 75.0. Editable online.
STR bbuRfRx1Gain	1.3.6.1.4.1.8603.1.2.1.2.5.1.63	FloatAsString	read-write	Represents the gain (in dB) provided by the RF Rx blade(RXU) in the Rx1 path. This gain is in addition to the gain provided by the LNA. This value is typically calibrated and set in the factory. The step size is 1 dB. Valid range is -10.0 to 75.0. Editable online.
STR bbuRfTx0Power	1.3.6.1.4.1.8603.1.2.1.2.5.1.64	FloatAsString	read-write	Represents the signal strength in dBm of the Tx signal put out on Tx0 by the TXU. An increase in this implies an increase in the signal input to the PA. Step size is 1 dBm. Valid range is -20.0 to 10.0. Editable online.
STR bbuRfTx1Power	1.3.6.1.4.1.8603.1.2.1.2.5.1.65	FloatAsString	read-write	Represents the signal strength in dBm of the Tx signal put out on Tx1 by the TXU. An increase in this implies an increase in the signal input to the PA. Step size is 1 dBm. Valid range is -20.0 to 10.0. Editable online.
INT bbuTxPwrDeviationLimit	1.3.6.1.4.1.8603.1.2.1.2.5.1.66	INTEGER	read-write
INT bbuSlope	1.3.6.1.4.1.8603.1.2.1.2.5.1.70	INTEGER	read-write	Represents the slope of the RR sector. It is an identifier which allows a mobile to distinguish between signals from different basestations. There are 112 possible slope values, however, only 80 of these are considered valid values. Editable offline.
INT bbuMcastSnr	1.3.6.1.4.1.8603.1.2.1.2.5.1.71	INTEGER	read-write
INT bbuScmType	1.3.6.1.4.1.8603.1.2.1.2.5.1.72	INTEGER	read-write
INT bbuSleepInactivityTimer	1.3.6.1.4.1.8603.1.2.1.2.5.1.91	INTEGER	read-write	Represents the amount of time of data inactivity (on the forward or reverse links) after which a mobile moves to the Sleep state. In units of 1/3 seconds [ eg. Value = 180 represents 60 seconds]. This time period is conveyed to the mobile at the time of establishing connectivity with the basestation. This quantity is non-linearly quantized, so the actual duration of inactivity before sleep may be slightly different from this value. Step size is 1/3 second. Range is 0 to 20 minutes. 0 means never go to sleep. Recommended value is 180 (i.e., 60sec). Editable online.
INT bbuLuTimer	1.3.6.1.4.1.8603.1.2.1.2.5.1.100	INTEGER	read-write	Periodicity, in seconds, of location update done by a stationary mobile. This time period is conveyed to the mobile at the time of establishing connectivity with the RR. This quantity is non-linearly quantized, so the actual duration of location update may be slightly different from this value. Step size is 1 second. Range is 5 seconds to 18 hours. Editable online.
rrChassis	1.3.6.1.4.1.8603.1.2.1.8
CHA rrChassisType	1.3.6.1.4.1.8603.1.2.1.8.1	ChassisType	read-only	The chassis revision.
STR rrChassisRev	1.3.6.1.4.1.8603.1.2.1.8.2	DisplayString	read-only	The chassis revision.
INT rrChassisMaxSlots	1.3.6.1.4.1.8603.1.2.1.8.3	INTEGER	read-only	Maximum number of slots in the chassis.
INT rrChassisNumCards	1.3.6.1.4.1.8603.1.2.1.8.4	INTEGER	read-only	Number of cards detected in the chassis.
rrChassisTable	1.3.6.1.4.1.8603.1.2.1.8.5		not-accessible	Table containing chassis card information.
rrChassisTableEntry	1.3.6.1.4.1.8603.1.2.1.8.5.1		not-accessible	RadioRouter chassis card table entry.
INT rrChassisSlotId	1.3.6.1.4.1.8603.1.2.1.8.5.1.1	INTEGER	read-only	The chassis slot of the card.
MOT rrChassisSlotHwType	1.3.6.1.4.1.8603.1.2.1.8.5.1.2	MoType	read-only	The card type.
STR rrChassisSlotHwName	1.3.6.1.4.1.8603.1.2.1.8.5.1.3	DisplayString	read-only	The card name.
CAR rrChassisSlotHwStatus	1.3.6.1.4.1.8603.1.2.1.8.5.1.4	CardOpState	read-only	The card hardware operational status.
STR rrChassisSlotHwVer	1.3.6.1.4.1.8603.1.2.1.8.5.1.5	DisplayString	read-only	The card hardware version number.
OCT rrChassisSlotHwEsn	1.3.6.1.4.1.8603.1.2.1.8.5.1.6	OCTET STRING	read-only	The card Electronic Serial Number.
STR rrChassisSlotSwVer	1.3.6.1.4.1.8603.1.2.1.8.5.1.8	DisplayString	read-only	The card IPMI (Intelligent Platform Management Interface) firmware version number.
rrPhyShelf	1.3.6.1.4.1.8603.1.2.3
CHA phyChassisType	1.3.6.1.4.1.8603.1.2.3.1	ChassisType	read-only	Chassis type.
STR phySerialNumber	1.3.6.1.4.1.8603.1.2.3.2	DisplayString	read-only	Chassis serial number.
STR phyProductionDate	1.3.6.1.4.1.8603.1.2.3.3	DisplayString	read-only	Chassis production date (mm/dd/yyyy).
STR phyPartNumber	1.3.6.1.4.1.8603.1.2.3.4	DisplayString	read-only	Chassis part number.
STR phyHardwareVersion	1.3.6.1.4.1.8603.1.2.3.5	DisplayString	read-only	Chassis hardware version.
RFB phyChassisRfBand	1.3.6.1.4.1.8603.1.2.3.6	RfBand	read-only	Chassis RF band.
STR phyAssemblyId	1.3.6.1.4.1.8603.1.2.3.7	DisplayString	read-only	Chassis assembly ID.
phyFanTable	1.3.6.1.4.1.8603.1.2.3.10		not-accessible
phyFanEntry	1.3.6.1.4.1.8603.1.2.3.10.1		not-accessible
INT phyFanIndex	1.3.6.1.4.1.8603.1.2.3.10.1.1	INTEGER	read-only	Fan index.
T/F phyFanOk	1.3.6.1.4.1.8603.1.2.3.10.1.2	TruthValue	read-only	Fan status.
phyRelayTable	1.3.6.1.4.1.8603.1.2.3.11		not-accessible
phyRelayEntry	1.3.6.1.4.1.8603.1.2.3.11.1		not-accessible
INT phyRelayIndex	1.3.6.1.4.1.8603.1.2.3.11.1.1	INTEGER	read-only	Relay index.
STR phyRelayName	1.3.6.1.4.1.8603.1.2.3.11.1.2	DisplayString	read-write	Relay name.
REL phyRelayState	1.3.6.1.4.1.8603.1.2.3.11.1.3	RelayState	read-only	Relay state.
phyAlarmInputTable	1.3.6.1.4.1.8603.1.2.3.12		not-accessible
phyAlarmInputEntry	1.3.6.1.4.1.8603.1.2.3.12.1		not-accessible
INT phyAlarmInputIndex	1.3.6.1.4.1.8603.1.2.3.12.1.1	INTEGER	read-only	AlarmInput index.
T/F phyAlarmInputEnable	1.3.6.1.4.1.8603.1.2.3.12.1.2	TruthValue	read-write	AlarmInput enable.
STR phyAlarmInputName	1.3.6.1.4.1.8603.1.2.3.12.1.3	DisplayString	read-write	AlarmInput name.
T/F phyAlarmInputState	1.3.6.1.4.1.8603.1.2.3.12.1.4	TruthValue	read-only	AlarmInput state.
phyPcuTable	1.3.6.1.4.1.8603.1.2.3.13		not-accessible
phyPcuEntry	1.3.6.1.4.1.8603.1.2.3.13.1		not-accessible
INT phyPcuIndex	1.3.6.1.4.1.8603.1.2.3.13.1.1	INTEGER	read-only	PCU index.
T/F phyPcuPowerFail	1.3.6.1.4.1.8603.1.2.3.13.1.2	TruthValue	read-only	PCU power fail.
phyAiuTable	1.3.6.1.4.1.8603.1.2.3.14		not-accessible
phyAiuEntry	1.3.6.1.4.1.8603.1.2.3.14.1		not-accessible
INT phyAiuIndex	1.3.6.1.4.1.8603.1.2.3.14.1.1	INTEGER	read-only	AIU index.
CAR phyAiuOpState	1.3.6.1.4.1.8603.1.2.3.14.1.2	CardOpState	read-only	AIU operational state.
CAR phyAiuFaultLed	1.3.6.1.4.1.8603.1.2.3.14.1.3	CardFaultLed	read-only	AIU fault LED color.
CAR phyAiuTempStatus	1.3.6.1.4.1.8603.1.2.3.14.1.4	CardTempStatus	read-only	AIU temperature status.
CAR phyAiuVoltageStatus	1.3.6.1.4.1.8603.1.2.3.14.1.5	CardVoltageStatus	read-only	AIU voltage status.
STR phyAiuSerialNumber	1.3.6.1.4.1.8603.1.2.3.14.1.6	DisplayString	read-only	AIU serial number.
STR phyAiuProductionDate	1.3.6.1.4.1.8603.1.2.3.14.1.7	DisplayString	read-only	AIU production date.
STR phyAiuPartNumber	1.3.6.1.4.1.8603.1.2.3.14.1.8	DisplayString	read-only	AIU part number.
STR phyAiuDescription	1.3.6.1.4.1.8603.1.2.3.14.1.9	DisplayString	read-only	AIU description.
STR phyAiuHardwareVersion	1.3.6.1.4.1.8603.1.2.3.14.1.10	DisplayString	read-only	AIU hardware version.
STR phyAiuIpmiSwVersion	1.3.6.1.4.1.8603.1.2.3.14.1.11	DisplayString	read-only	AIU IPMI software version.
STR phyAiuAssemblyId	1.3.6.1.4.1.8603.1.2.3.14.1.12	DisplayString	read-only	AIU assembly ID.
ASS phyAiuAssemblyIdSrc	1.3.6.1.4.1.8603.1.2.3.14.1.13	AssemblyIdSource	read-only	AIU assembly ID source.
T/F phyAiuExcessiveFakeAid	1.3.6.1.4.1.8603.1.2.3.14.1.14	TruthValue	read-only	This object is true(1) if the assembly ID is programmed under more than one source.
ADM phyAiuAdminState	1.3.6.1.4.1.8603.1.2.3.14.1.20	AdminState	read-write	AIU administrative state.
T/F phyAiuRebootRr	1.3.6.1.4.1.8603.1.2.3.14.1.21	TruthValue	read-write	Setting this object to true(1) will power cycle the RadioRouter chassis!
phyMcuTable	1.3.6.1.4.1.8603.1.2.3.15		not-accessible
phyMcuEntry	1.3.6.1.4.1.8603.1.2.3.15.1		not-accessible
INT phyMcuIndex	1.3.6.1.4.1.8603.1.2.3.15.1.1	INTEGER	read-only	MCU index.
CAR phyMcuOpState	1.3.6.1.4.1.8603.1.2.3.15.1.2	CardOpState	read-only	MCU operational state.
CAR phyMcuFaultLed	1.3.6.1.4.1.8603.1.2.3.15.1.3	CardFaultLed	read-only	MCU fault LED color.
CAR phyMcuTempStatus	1.3.6.1.4.1.8603.1.2.3.15.1.4	CardTempStatus	read-only	MCU temperature status.
CAR phyMcuVoltageStatus	1.3.6.1.4.1.8603.1.2.3.15.1.5	CardVoltageStatus	read-only	MCU voltage status.
STR phyMcuSerialNumber	1.3.6.1.4.1.8603.1.2.3.15.1.6	DisplayString	read-only	MCU serial number.
STR phyMcuProductionDate	1.3.6.1.4.1.8603.1.2.3.15.1.7	DisplayString	read-only	MCU production date.
STR phyMcuPartNumber	1.3.6.1.4.1.8603.1.2.3.15.1.8	DisplayString	read-only	MCU part number.
STR phyMcuDescription	1.3.6.1.4.1.8603.1.2.3.15.1.9	DisplayString	read-only	MCU description.
STR phyMcuHardwareVersion	1.3.6.1.4.1.8603.1.2.3.15.1.10	DisplayString	read-only	MCU hardware version.
STR phyMcuIpmiSwVersion	1.3.6.1.4.1.8603.1.2.3.15.1.11	DisplayString	read-only	MCU IPMI software version.
STR phyMcuAssemblyId	1.3.6.1.4.1.8603.1.2.3.15.1.12	DisplayString	read-only	MCU assembly ID.
ASS phyMcuAssemblyIdSrc	1.3.6.1.4.1.8603.1.2.3.15.1.13	AssemblyIdSource	read-only	MCU assembly ID source.
T/F phyMcuExcessiveFakeAid	1.3.6.1.4.1.8603.1.2.3.15.1.14	TruthValue	read-only	This object is true if the assembly ID is programmed under more than one source.
ADM phyMcuAdminState	1.3.6.1.4.1.8603.1.2.3.15.1.20	AdminState	read-write	MCU administrative state.
STR phyCpldVersion	1.3.6.1.4.1.8603.1.2.3.15.1.21	DisplayString	read-only	MCU CPLD version.
phyBbuTable	1.3.6.1.4.1.8603.1.2.3.16		not-accessible
phyBbuEntry	1.3.6.1.4.1.8603.1.2.3.16.1		not-accessible
INT phyBbuIndex	1.3.6.1.4.1.8603.1.2.3.16.1.1	INTEGER	read-only	BBU index.
CAR phyBbuOpState	1.3.6.1.4.1.8603.1.2.3.16.1.2	CardOpState	read-only	BBU operational state.
CAR phyBbuFaultLed	1.3.6.1.4.1.8603.1.2.3.16.1.3	CardFaultLed	read-only	BBU fault LED color.
CAR phyBbuTempStatus	1.3.6.1.4.1.8603.1.2.3.16.1.4	CardTempStatus	read-only	BBU temperature status.
CAR phyBbuVoltageStatus	1.3.6.1.4.1.8603.1.2.3.16.1.5	CardVoltageStatus	read-only	BBU voltage status.
STR phyBbuSerialNumber	1.3.6.1.4.1.8603.1.2.3.16.1.6	DisplayString	read-only	BBU serial number.
STR phyBbuProductionDate	1.3.6.1.4.1.8603.1.2.3.16.1.7	DisplayString	read-only	BBU production date.
STR phyBbuPartNumber	1.3.6.1.4.1.8603.1.2.3.16.1.8	DisplayString	read-only	BBU part number.
STR phyBbuDescription	1.3.6.1.4.1.8603.1.2.3.16.1.9	DisplayString	read-only	BBU description.
STR phyBbuHardwareVersion	1.3.6.1.4.1.8603.1.2.3.16.1.10	DisplayString	read-only	BBU hardware version.
STR phyBbuIpmiSwVersion	1.3.6.1.4.1.8603.1.2.3.16.1.11	DisplayString	read-only	BBU IPMI software version.
STR phyBbuAssemblyId	1.3.6.1.4.1.8603.1.2.3.16.1.12	DisplayString	read-only	BBU assembly Id.
ASS phyBbuAssemblyIdSrc	1.3.6.1.4.1.8603.1.2.3.16.1.13	AssemblyIdSource	read-only	BBU assembly Id source.
T/F phyBbuExcessiveFakeAid	1.3.6.1.4.1.8603.1.2.3.16.1.14	TruthValue	read-only	This object is true if the assembly ID is programmed under more than one source.
ADM phyBbuAdminState	1.3.6.1.4.1.8603.1.2.3.16.1.20	AdminState	read-write	BBU administrative state.
phyRxuTable	1.3.6.1.4.1.8603.1.2.3.17		not-accessible
phyRxuEntry	1.3.6.1.4.1.8603.1.2.3.17.1		not-accessible
INT phyRxuIndex	1.3.6.1.4.1.8603.1.2.3.17.1.1	INTEGER	read-only	RXU index.
CAR phyRxuOpState	1.3.6.1.4.1.8603.1.2.3.17.1.2	CardOpState	read-only	RXU operational state.
CAR phyRxuFaultLed	1.3.6.1.4.1.8603.1.2.3.17.1.3	CardFaultLed	read-only	RXU fault LED color.
CAR phyRxuTempStatus	1.3.6.1.4.1.8603.1.2.3.17.1.4	CardTempStatus	read-only	RXU temperature status.
CAR phyRxuVoltageStatus	1.3.6.1.4.1.8603.1.2.3.17.1.5	CardVoltageStatus	read-only	RXU voltage status.
STR phyRxuSerialNumber	1.3.6.1.4.1.8603.1.2.3.17.1.6	DisplayString	read-only	RXU serial number.
STR phyRxuProductionDate	1.3.6.1.4.1.8603.1.2.3.17.1.7	DisplayString	read-only	RXU production date.
STR phyRxuPartNumber	1.3.6.1.4.1.8603.1.2.3.17.1.8	DisplayString	read-only	RXU part number.
STR phyRxuDescription	1.3.6.1.4.1.8603.1.2.3.17.1.9	DisplayString	read-only	RXU description.
STR phyRxuHardwareVersion	1.3.6.1.4.1.8603.1.2.3.17.1.10	DisplayString	read-only	RXU hardware version.
STR phyRxuIpmiSwVersion	1.3.6.1.4.1.8603.1.2.3.17.1.11	DisplayString	read-only	RXU IPMI software version.
STR phyRxuAssemblyId	1.3.6.1.4.1.8603.1.2.3.17.1.12	DisplayString	read-only	RXU assembly ID.
ASS phyRxuAssemblyIdSrc	1.3.6.1.4.1.8603.1.2.3.17.1.13	AssemblyIdSource	read-only	RXU assembly ID source.
T/F phyRxuExcessiveFakeAid	1.3.6.1.4.1.8603.1.2.3.17.1.14	TruthValue	read-only	This object is true if the assembly ID is programmed under more than one source.
ADM phyRxuAdminState	1.3.6.1.4.1.8603.1.2.3.17.1.20	AdminState	read-write	RXU administrative state.
RFB phyRxuRfBand	1.3.6.1.4.1.8603.1.2.3.17.1.21	RfBand	read-only	RXU RF band.
phyTxuTable	1.3.6.1.4.1.8603.1.2.3.18		not-accessible
phyTxuEntry	1.3.6.1.4.1.8603.1.2.3.18.1		not-accessible
INT phyTxuIndex	1.3.6.1.4.1.8603.1.2.3.18.1.1	INTEGER	read-only	TXU index.
CAR phyTxuOpState	1.3.6.1.4.1.8603.1.2.3.18.1.2	CardOpState	read-only	TXU operational state.
CAR phyTxuFaultLed	1.3.6.1.4.1.8603.1.2.3.18.1.3	CardFaultLed	read-only	TXU fault LED color.
CAR phyTxuTempStatus	1.3.6.1.4.1.8603.1.2.3.18.1.4	CardTempStatus	read-only	TXU temperature status.
CAR phyTxuVoltageStatus	1.3.6.1.4.1.8603.1.2.3.18.1.5	CardVoltageStatus	read-only	TXU voltage status.
STR phyTxuSerialNumber	1.3.6.1.4.1.8603.1.2.3.18.1.6	DisplayString	read-only	TXU serial number.
STR phyTxuProductionDate	1.3.6.1.4.1.8603.1.2.3.18.1.7	DisplayString	read-only	TXU production date.
STR phyTxuPartNumber	1.3.6.1.4.1.8603.1.2.3.18.1.8	DisplayString	read-only	TXU part number.
STR phyTxuDescription	1.3.6.1.4.1.8603.1.2.3.18.1.9	DisplayString	read-only	TXU description.
STR phyTxuHardwareVersion	1.3.6.1.4.1.8603.1.2.3.18.1.10	DisplayString	read-only	TXU hardware version.
STR phyTxuIpmiSwVersion	1.3.6.1.4.1.8603.1.2.3.18.1.11	DisplayString	read-only	TXU IPMI software version.
STR phyTxuAssemblyId	1.3.6.1.4.1.8603.1.2.3.18.1.12	DisplayString	read-only	TXU assembly ID.
ASS phyTxuAssemblyIdSrc	1.3.6.1.4.1.8603.1.2.3.18.1.13	AssemblyIdSource	read-only	TXU assembly ID source.
T/F phyTxuExcessiveFakeAid	1.3.6.1.4.1.8603.1.2.3.18.1.14	TruthValue	read-only	This object is true if the assembly ID is programmed under more than one source.
ADM phyTxuAdminState	1.3.6.1.4.1.8603.1.2.3.18.1.20	AdminState	read-write	TXU administrative state.
RFB phyTxuRfBand	1.3.6.1.4.1.8603.1.2.3.18.1.21	RfBand	read-only	TXU RF band.
rrPaShelf	1.3.6.1.4.1.8603.1.2.4
paTable	1.3.6.1.4.1.8603.1.2.4.1		not-accessible
paEntry	1.3.6.1.4.1.8603.1.2.4.1.1		not-accessible
INT paIndex	1.3.6.1.4.1.8603.1.2.4.1.1.1	INTEGER	read-only	Power Amp index.
ADM paAdminState	1.3.6.1.4.1.8603.1.2.4.1.1.2	AdminState	read-write	PA administrative state.
CAR paOpState	1.3.6.1.4.1.8603.1.2.4.1.1.3	CardOpState	read-only	PA operational state. This object is deprecated in favor of paOperStatus.
CAR paTempStatus	1.3.6.1.4.1.8603.1.2.4.1.1.4	CardTempStatus	read-only	PA temperature status.
STR paOutputTxPower	1.3.6.1.4.1.8603.1.2.4.1.1.5	FloatAsString	read-only	PA output transmit power, in dbm.
STR paInputTxPower	1.3.6.1.4.1.8603.1.2.4.1.1.6	FloatAsString	read-only	PA input transmit power, in dbm.
STR paTxReflectedPower	1.3.6.1.4.1.8603.1.2.4.1.1.7	FloatAsString	read-only	PA transmit reflected power, in dbm.
T/F paDcPowerFault	1.3.6.1.4.1.8603.1.2.4.1.1.8	TruthValue	read-only	This object indicates if a PA DC power fault exists.
T/F paRfOverdriveFault	1.3.6.1.4.1.8603.1.2.4.1.1.9	TruthValue	read-only	This object indicates if a PA RF overdrive fault exists.
T/F paFeedForwardFault	1.3.6.1.4.1.8603.1.2.4.1.1.10	TruthValue	read-only	This object indicates if a PA feed forward fault exists.
STR paSerialNumber	1.3.6.1.4.1.8603.1.2.4.1.1.11	DisplayString	read-only	PA serial number.
RFB paRfBand	1.3.6.1.4.1.8603.1.2.4.1.1.12	RfBand	read-only	PA RF band. This object is deprecated in favor of paRadioFreqBand.
STR paHardwareVersion	1.3.6.1.4.1.8603.1.2.4.1.1.13	DisplayString	read-only	PA hardware version.
INT paTemperatureEx	1.3.6.1.4.1.8603.1.2.4.1.1.14	INTEGER	read-only	PA temperature (Celcius).
T/F paReflectedPowerFault	1.3.6.1.4.1.8603.1.2.4.1.1.15	TruthValue	read-only	This object indicates if a reflected power fault exists.
T/F paUnderPowerFault	1.3.6.1.4.1.8603.1.2.4.1.1.16	TruthValue	read-only	This object indicates if an under power fault exists.
STR paTargetOutputTxPower	1.3.6.1.4.1.8603.1.2.4.1.1.17	FloatAsString	read-write	PA target output Tx power.
PAS paOperStatus	1.3.6.1.4.1.8603.1.2.4.1.1.18	PaState	read-only	PA operational state.
PAR paRadioFreqBand	1.3.6.1.4.1.8603.1.2.4.1.1.19	PaRfBand	read-only	PA RF band.
T/F paFanSpeedOk	1.3.6.1.4.1.8603.1.2.4.2	TruthValue	read-only	This object indicates if the PA shelf fan speed is within normal operating limits.
T/F paFanTempOk	1.3.6.1.4.1.8603.1.2.4.3	TruthValue	read-only	This object indicates if the PA shelf fan temperature is within normal operating limits.
T/F paBreakerTripped	1.3.6.1.4.1.8603.1.2.4.4	TruthValue	read-only	This object indicates if a PA shelf breaker has been tripped.
T/F paSimulcast	1.3.6.1.4.1.8603.1.2.4.5	TruthValue	read-write	This object indicates if the PA shelf supports simulcast.
T/F paTxCalEnabled	1.3.6.1.4.1.8603.1.2.4.6	TruthValue	read-write	This object indicates if PX Gain control loop is enabled.
paPowerTable	1.3.6.1.4.1.8603.1.2.4.7		not-accessible	This table is used to display PA various Tx power values. These values are store on the system as floating point numbers, but since SNMP cannot display floating point numbers, this table will convert the values to integer.
paPowerEntry	1.3.6.1.4.1.8603.1.2.4.7.1		not-accessible
INT paPowerIndex	1.3.6.1.4.1.8603.1.2.4.7.1.1	INTEGER	read-only	PA index.
INT paPowerTxOutput	1.3.6.1.4.1.8603.1.2.4.7.1.2	INTEGER	read-only	PA output Tx power. In order to retain precision in converting the floating point value into integer, the value is first multiplied by 100. For example 43.25dB will be represented as 4325.
INT paPowerTxInput	1.3.6.1.4.1.8603.1.2.4.7.1.3	INTEGER	read-only	PA input Tx power. In order to retain precision in converting the floating point value into integer, the value is first multiplied by 100. For example -50.75dB will be represented as -5075.
INT paPowerTxReflected	1.3.6.1.4.1.8603.1.2.4.7.1.4	INTEGER	read-only	PA reflected Tx power. In order to retain precision in converting the floating point value into integer, the value is first multiplied by 100. For example 21.00dB will be represented as 2100.

RFC description

Monitors physical chassis components, power modules, fans, and environmental status on Flarion wireless systems.

Start monitoring Flarion (Qualcomm) Flash-OFDM base-station chassis (hardware inventory/fans) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FLARION-PHYS-MIB