HH3C-WAPI-MIB

All MIBs › HH3C-WAPI-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2010-12-01

Category: Domain: Security, Domain: Wireless, Standard: IEEE 802, Technology: Wireless, Vendor: H3C/HH3C, Wireless and WLAN

Description: HH3C MIB for WLAN Authentication and Privacy Infrastructure (WAPI) managing Chinese wireless security standard.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-WAPI-MIB?

HH3C-WAPI-MIB is a Hangzhou H3C Tech. proprietary MIB configuring and monitoring WAPI (WLAN Authentication and Privacy Infrastructure), a Chinese national wireless-security standard. Its objects cover a WAPI-mode-enabled flag, AS (Authentication Server) IP address type/address, certificate-installed flag, and statistics counters for WAI signature/HMAC/authentication-result/discard/timeout/format errors and certificate/unicast/multicast handshake failures, plus a config table (AS address, auth method/mode, ISP domain, certificate domain, AS name, BK-rekey-enabled flag) and an extension table. As a security/status MIB it lets an administrator confirm WAPI authentication-server configuration and watch handshake-failure counts on an H3C wireless device. It is deployed on H3C (Hangzhou) wireless networking equipment (WAPI). Engineers can download the HH3C-WAPI-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-WAPI-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C (Hangzhou) wireless networking equipment (WAPI)

Monitoring Examples

An administrator checks hh3cwapiStatsWAIAuthRsltFailures to diagnose repeated WAPI authentication failures on an H3C wireless device.

What Can Be Monitored

WAPI authentication-server configuration and handshake-failure counts

Imported Objects

From HH3C-OID-MIB

hh3cCommon

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From RFC1213-MIB

ifDescr
ifIndex

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
TruthValue

How to Use in IPNetwork Monitor

Example using hh3cwapiStatsWAISignatureErrors OID:

Select an H3C wireless networking equipment (WAPI authentication) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hh3cwapiStatsWAISignatureErrors into the Find box to locate it in the OID tree, then select it and click OK. This counter increases when the received packet of WAI signature is wrong. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cwapiMIB	1.3.6.1.4.1.25506.2.77			HH3C-WAPI-MIB is an extension of MIB in WAPI protocol. This MIB contains objects to manage configuration and monitor running state for WAPI feature.
hh3cwapiMIBObjects	1.3.6.1.4.1.25506.2.77.1
T/F hh3cwapiModeEnabled	1.3.6.1.4.1.25506.2.77.1.1	TruthValue	read-write	When this object is set to TRUE, it shall indicate that WAPI is enabled. Otherwise, it shall indicate that WAPI is disabled.
IPt hh3cwapiASIPAddressType	1.3.6.1.4.1.25506.2.77.1.2	InetAddressType	read-write	This object is used to set global IP addresses type (IPv4 or IPv6) of AS.
IP hh3cwapiASIPAddress	1.3.6.1.4.1.25506.2.77.1.3	InetAddress	read-write	This object is used to set the global IP address of AS.
T/F hh3cwapiCertificateInstalled	1.3.6.1.4.1.25506.2.77.1.4	TruthValue	read-only	This object indicates whether the entity has installed certificate. When the value is TURE, it shall indicate that the entity has installed certificate. Otherwise, it shall indicate that the entity hasn't installed certificate.
hh3cwapiMIBStatsObjects	1.3.6.1.4.1.25506.2.77.2
C32 hh3cwapiStatsWAISignatureErrorsEx	1.3.6.1.4.1.25506.2.77.2.1	Counter32	read-only	This counter increases when the received packet of WAI signature is wrong.
C32 hh3cwapiStatsWAIHMACErrors	1.3.6.1.4.1.25506.2.77.2.2	Counter32	read-only	This counter increases when the received packet of WAI message authentication key checking error occurs.
C32 hh3cwapiStatsWAIAuthRsltFailures	1.3.6.1.4.1.25506.2.77.2.3	Counter32	read-only	This counter increases when the WAI authentication result is unsuccessful.
C32 hh3cwapiStatsWAIDiscardCounters	1.3.6.1.4.1.25506.2.77.2.4	Counter32	read-only	This counter increases when the received packet of WAI are discarded.
C32 hh3cwapiStatsWAITimeoutCounters	1.3.6.1.4.1.25506.2.77.2.5	Counter32	read-only	This counter increases when the packet of WAI overtime are detected.
C32 hh3cwapiStatsWAIFormatErrors	1.3.6.1.4.1.25506.2.77.2.6	Counter32	read-only	This counter increases when the WAI packet of WAI format error is detected.
C32 hh3cwapiStatsWAICtfHskFailures	1.3.6.1.4.1.25506.2.77.2.7	Counter32	read-only	This counter increases when the WAI certificate authenticates unsuccessfully.
C32 hh3cwapiStatsWAIUniHskFailures	1.3.6.1.4.1.25506.2.77.2.8	Counter32	read-only	This counter increases when the WAI unicast cipher key negotiates unsuccessfully.
C32 hh3cwapiStatsWAIMulHskFailures	1.3.6.1.4.1.25506.2.77.2.9	Counter32	read-only	This counter increases when the WAI multicast cipher key announces unsuccessfully.
hh3cwapiMIBTableObjects	1.3.6.1.4.1.25506.2.77.3
hh3cwapiConfigTable	1.3.6.1.4.1.25506.2.77.3.1		not-accessible	The table containing WAPI configuration objects.
hh3cwapiConfigEntry	1.3.6.1.4.1.25506.2.77.3.1.1		not-accessible	An entry in the hh3cwapiConfigTable.
IPt hh3cwapiConfigASIPAddressType	1.3.6.1.4.1.25506.2.77.3.1.1.1	InetAddressType	read-write	This object is used to set IP addresses type of AS.
IP hh3cwapiConfigASIPAddress	1.3.6.1.4.1.25506.2.77.3.1.1.2	InetAddress	read-write	This object is used to set the IP address of AS.
INT hh3cwapiConfigAuthMethod	1.3.6.1.4.1.25506.2.77.3.1.1.3	INTEGER	read-write	This object selects a mechanism for WAPI authentication method. The default is certificate.
INT hh3cwapiConfigAuthMode	1.3.6.1.4.1.25506.2.77.3.1.1.4	INTEGER	read-write	This object selects a mechanism for WAPI authentication mode. When the value is standard, it shall indicate that the entity acts accord with the official definition. Otherwise, it shall indicate that the entity finishs authentication by means of RADIUS. The default is standard.
OCT hh3cwapiConfigISPDomain	1.3.6.1.4.1.25506.2.77.3.1.1.5	OCTET STRING	read-write	The ISP domain name.
OCT hh3cwapiConfigCertificateDomain	1.3.6.1.4.1.25506.2.77.3.1.1.6	OCTET STRING	read-write	The PKI domain name.
OCT hh3cwapiConfigASName	1.3.6.1.4.1.25506.2.77.3.1.1.7	OCTET STRING	read-write	The name of AS.
T/F hh3cwapiConfigBKRekeyEnabled	1.3.6.1.4.1.25506.2.77.3.1.1.8	TruthValue	read-write	This object indicates whether the BK rekey function is supported. When the value is TURE, it shall indicate that the BK rekey function is supported. Otherwise, it shall indicate that the BK rekey function is not supported.
hh3cwapiConfigExtTable	1.3.6.1.4.1.25506.2.77.3.2		not-accessible	The table containing WAPI configuration objects for SSID.
hh3cwapiConfigExtEntry	1.3.6.1.4.1.25506.2.77.3.2.1		not-accessible	An extend entry in the hh3cwapiConfigExtTable.
I32 hh3cwapiConfigServicePolicyID	1.3.6.1.4.1.25506.2.77.3.2.1.1	Integer32	not-accessible	Represents the ID of each service policy.
T/F hh3cwapiConfigUnicastCipherEnabled	1.3.6.1.4.1.25506.2.77.3.2.1.2	TruthValue	read-write	This object enables or disables the unicast cipher.
U32 hh3cwapiConfigUnicastCipherSize	1.3.6.1.4.1.25506.2.77.3.2.1.3	Unsigned32	read-only	This object indicates the length in bits of the unicast cipher key. This should be 256 for SMS4, first 128 bits for encrypting, last 128 bits for integrity checking.
T/F hh3cwapiConfigAuthenticationSuiteEnabled	1.3.6.1.4.1.25506.2.77.3.2.1.4	TruthValue	read-write	This variable indicates the corresponding AKM suite is enabled or disabled.
OCT hh3cwapiConfigAuthenticationSuite	1.3.6.1.4.1.25506.2.77.3.2.1.5	OCTET STRING	read-only	The selector of an AKM suite. It consists of an OUI (the first 3 octets) and a cipher suite identifier (the last octet).
IPt hh3cwapiCfgExtASIPAddressType	1.3.6.1.4.1.25506.2.77.3.2.1.6	InetAddressType	read-write	This object is used to set IP addresses type of AS.
IP hh3cwapiCfgExtASIPAddress	1.3.6.1.4.1.25506.2.77.3.2.1.7	InetAddress	read-write	This object is used to set the IP address of AS.
OCT hh3cwapiCfgExtASName	1.3.6.1.4.1.25506.2.77.3.2.1.8	OCTET STRING	read-write	This object is used to set the name of AS.
OCT hh3cwapiCfgExtCertDomain	1.3.6.1.4.1.25506.2.77.3.2.1.9	OCTET STRING	read-write	This object is used to set the PKI domain name.
T/F hh3cwapiCfgExtCertInstalled	1.3.6.1.4.1.25506.2.77.3.2.1.10	TruthValue	read-only	This object indicates whether the entity has installed certificate. When the value is TURE, it shall indicate that the SSID has installed certificate. Otherwise, it shall indicate that the SSID hasn't installed certificate.
hh3cwapiTrap	1.3.6.1.4.1.25506.2.77.4
hh3cwapiTrapPrefix	1.3.6.1.4.1.25506.2.77.4.0
NTF hh3cwapiUserwithInvalidCertificate	1.3.6.1.4.1.25506.2.77.4.0.1			This trap is sent when a user intrudes upon network with invalid certificate.
NTF hh3cwapiStationReplayAttack	1.3.6.1.4.1.25506.2.77.4.0.2			This trap is sent when an attacker records and replays network transactions.
NTF hh3cwapiTamperAttack	1.3.6.1.4.1.25506.2.77.4.0.3			This trap is sent when an attacker monitors network traffic and maliciously changes data in transit(for example, an attacker may modify the contents of a WAI message).
NTF hh3cwapiLowSafeLevelAttack	1.3.6.1.4.1.25506.2.77.4.0.4			This trap is sent when a station associates AP(Access Point), creates packet of Unicast Key Negotiation Response with wrong WIE(WAPI Information Element) of ASUE(Authentication Supplicant Entity).
NTF hh3cwapiAddressRedirectionAttack	1.3.6.1.4.1.25506.2.77.4.0.5			This trap is sent when an attacker maliciously changes destination MAC address of WPI(WLAN Privacy Infrastructure) frame.
hh3cwapiTrapInfo	1.3.6.1.4.1.25506.2.77.4.1
MAC hh3cwapiTrapInfoMacAddr	1.3.6.1.4.1.25506.2.77.4.1.1	MacAddress	accessible-for-notify	The MAC address of the WAPI user.
I32 hh3cwapiTrapInfoAPId	1.3.6.1.4.1.25506.2.77.4.1.2	Integer32	accessible-for-notify	To uniquely identify each AP.
I32 hh3cwapiTrapInfoRadioId	1.3.6.1.4.1.25506.2.77.4.1.3	Integer32	accessible-for-notify	Represents each radio.
MAC hh3cwapiTrapInfoBSSId	1.3.6.1.4.1.25506.2.77.4.1.4	MacAddress	accessible-for-notify	As MAC Address format, it is to identify BSS.

RFC description

Manages WAPI (Wireless Authentication and Privacy Infrastructure) security configuration and monitoring on H3C wireless devices.

Start monitoring H3C wireless networking equipment (WAPI authentication) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-WAPI-MIB