All MIBs › FLARION-PHYS-MIB › phyRelayName
phyRelayName
Module: FLARION-PHYS-MIB
OID (symbolic): FLARION-PHYS-MIB::phyRelayName
OID (numeric): 1.3.6.1.4.1.8603.1.2.3.11.1.2
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: Relay name.
What is phyRelayName?
An admin-assigned label for this relay (e.g. 'Door Alarm' or 'Generator Start'), settable so the relay's purpose is documented directly on the device rather than only in a site diagram.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8603.1.2.3.11.1.2 snmpwalk -v2c -c public <target> FLARION-PHYS-MIB::phyRelayName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8603.1.2.3.11.1.2.1 snmpget -v2c -c public <target> FLARION-PHYS-MIB::phyRelayName.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.8603.1.2.3.11.1.2.1 s <value>
Start monitoring Flarion (Qualcomm) Flash-OFDM base-station chassis (hardware inventory/fans) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FLARION-PHYS-MIB::phyRelayName OID value, configure state conditions and alerts, and monitor any Flarion (Qualcomm) Flash-OFDM base-station chassis (hardware inventory/fans) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8603 | flarion | FLARION-MIB |
| 1.3.6.1.4.1.8603.1 | mibs | FLARION-MIB |
| 1.3.6.1.4.1.8603.1.2 | rrMib | FLARION-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8603.1.2.3 | rrPhyShelf | FLARION-PHYS-MIB |
| 1.3.6.1.4.1.8603.1.2.3.11 | phyRelayTable | FLARION-PHYS-MIB |
| 1.3.6.1.4.1.8603.1.2.3.11.1 | phyRelayEntry | FLARION-PHYS-MIB |
| 1.3.6.1.4.1.8603.1.2.3.11.1.2 | phyRelayName | FLARION-PHYS-MIB |