EQLCONTROLLER-MIB

All MIBs › EQLCONTROLLER-MIB

Organization: EqualLogic Inc.

Last Updated: 2014-03-12

Category: Domain: Storage, Vendor: Dell/DNOS, Vendor: EqualLogic/Dell

Description: Dell EqualLogic storage array controller MIB providing management objects for RAID controller status and performance.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is EQLCONTROLLER-MIB?

EQLCONTROLLER-MIB is Dell's (originally EqualLogic's) proprietary MIB for the RAID/storage controllers inside EqualLogic PS-series iSCSI SAN arrays, exposing per-controller identity, firmware, and health data. It covers configuration/identity information (model, CM revision, software revision, flash image revision) as well as operational hardware-status data for each controller in what is typically a dual-controller high-availability array. It is squarely a hardware/software status monitoring MIB: eqlControllerBatteryStatus flags a failing cache-protection battery, eqlControllerProcessorTemp and eqlControllerChipsetTemp expose thermal health, eqlControllerUpTime shows how long a controller has been running (and whether it recently rebooted/failed over), and eqlControllerPrimaryOrSecondary reveals which controller currently holds the active role in the redundant pair. It is a standalone Dell/EqualLogic proprietary MIB with no stated dependency on external standard MIBs. It is typically deployed on Dell EqualLogic PS-series SAN arrays in enterprise storage environments where controller redundancy and thermal/battery health are critical to data availability, and the EQLCONTROLLER-MIB download is available directly to administrators who want to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in EQLCONTROLLER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dell EqualLogic PS-series iSCSI SAN array

Monitoring Examples

An operator would poll eqlControllerTable/eqlControllerEntry per eqlControllerIndex to compare eqlControllerPrimaryOrSecondary against expectation and check eqlControllerUpTime for an unplanned recent restart of a controller. A rising eqlControllerProcessorTemp or eqlControllerChipsetTemp alongside a degraded eqlControllerBatteryStatus would warn of a controller nearing thermal or cache-protection failure, and comparing eqlControllerSwRevision/eqlControllerCMRevision across both controllers in the pair would catch a firmware mismatch after a partial upgrade.

What Can Be Monitored

controller battery status
controller uptime
processor temperature
chipset temperature
primary/secondary controller role
firmware/CM revision

Imported Objects

From EQLGROUP-MIB

eqlGroupId

OBJECT-TYPE

From EQLMEMBER-MIB

eqlMemberIndex

OBJECT-TYPE

From EQUALLOGIC-SMI

equalLogic

MODULE-IDENTITY

From SNMPv2-SMI

Counter32
Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32
enterprises

From SNMPv2-TC

DisplayString

How to Use in IPNetwork Monitor

Example using eqlControllerUpTime OID:

Select a Dell EqualLogic PS-series iSCSI SAN storage array (RAID controller identity/health) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type eqlControllerUpTime into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. This variable specifies time interval since the controller was last booted in seconds. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the value is unexpectedly low (e.g. under 10 minutes), since that indicates a recent, possibly unplanned, reboot or restart. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
eqlcontrollerModule	1.3.6.1.4.1.12740.4			Copyright (c) 2004-2009 by Dell, Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by Dell, Inc. This software embodies proprietary information and trade secrets of Dell, Inc.
eqlcontrollerObjects	1.3.6.1.4.1.12740.4.1
eqlControllerTable	1.3.6.1.4.1.12740.4.1.1		not-accessible	EqualLogic-Dynamic Member Controller Table. This table contains controller status information. One table entry per controller. It is indexed by controller slot number. The number of entries is equal to the number of controllers that are present in the system
eqlControllerEntry	1.3.6.1.4.1.12740.4.1.1.1		not-accessible	An entry (row) containing controller status information.
I32 eqlControllerIndex	1.3.6.1.4.1.12740.4.1.1.1.1	Integer32	not-accessible	The index value that uniquely identifies the controller. It is equal to the controller slot number. The minimum slot number is 1
STR eqlControllerModel	1.3.6.1.4.1.12740.4.1.1.1.2	DisplayString	read-only	This variable specifies controller model. Is value of Part=
STR eqlControllerCMRevision	1.3.6.1.4.1.12740.4.1.1.1.3	DisplayString	read-only	CM version number; Is value of Rev=
STR eqlControllerSwRevision	1.3.6.1.4.1.12740.4.1.1.1.4	DisplayString	read-only	This variable specifies the customer visible controller software revision.
INT eqlControllerBatteryStatus	1.3.6.1.4.1.12740.4.1.1.1.5	INTEGER	read-only	This variable specifies controller battery status.
C32 eqlControllerUpTimeEx	1.3.6.1.4.1.12740.4.1.1.1.6	Counter32	read-only	This variable specifies time interval since the controller was last booted in seconds.
I32 eqlControllerProcessorTemp	1.3.6.1.4.1.12740.4.1.1.1.7	Integer32	read-only	This variable specifies the temperature in Celsius.
I32 eqlControllerChipsetTemp	1.3.6.1.4.1.12740.4.1.1.1.8	Integer32	read-only	This variable specifies the temperature in Celsius.
INT eqlControllerPrimaryOrSecondary	1.3.6.1.4.1.12740.4.1.1.1.9	INTEGER	read-only	This variable specifies if the controller is a primary or secondary controller.
STR eqlControllerPrimaryFlashImageRev	1.3.6.1.4.1.12740.4.1.1.1.10	DisplayString	read-only	The revision of the primary flash image.
STR eqlControllerSecondaryFlashImageRev	1.3.6.1.4.1.12740.4.1.1.1.11	DisplayString	read-only	The revision of the secondary flash image.
STR eqlControllerSerialNumber	1.3.6.1.4.1.12740.4.1.1.1.12	DisplayString	read-only	This variable specifies controller serial number. Is value of SN=
STR eqlControllerDate	1.3.6.1.4.1.12740.4.1.1.1.13	DisplayString	read-only	This variable specifies date of mfg of the CM. Is value of Date=
STR eqlControllerECO	1.3.6.1.4.1.12740.4.1.1.1.14	DisplayString	read-only	This variable specifies eco level of the CM. Is value of ECO=
OCT eqlControllerEEprom	1.3.6.1.4.1.12740.4.1.1.1.15	OCTET STRING	read-only	The contents of the eeprom.
U32 eqlControllerPLDrev	1.3.6.1.4.1.12740.4.1.1.1.16	Unsigned32	read-only	This variable specifies pld version number.
U32 eqlControllerPlatformType	1.3.6.1.4.1.12740.4.1.1.1.17	Unsigned32	read-only	This variable specifies the platform type. If the number is negative its a simulator. If zero its an eval platform. If >= 1 is the version of the pss board -- does this mean cm rev?
U32 eqlControllerPlatformVersion	1.3.6.1.4.1.12740.4.1.1.1.18	Unsigned32	read-only	This variable specifies the version of the pss board (ie CM?)
U32 eqlControllerCPUPass	1.3.6.1.4.1.12740.4.1.1.1.19	Unsigned32	read-only	This variable specifies silicon rev.
U32 eqlControllerCPUrev	1.3.6.1.4.1.12740.4.1.1.1.20	Unsigned32	read-only	This variable specifies the revision of the cpu.
U32 eqlControllerCPUfreq	1.3.6.1.4.1.12740.4.1.1.1.21	Unsigned32	read-only	This variable specifies the cpu freq in MHz.
U32 eqlControllerPhysRam	1.3.6.1.4.1.12740.4.1.1.1.22	Unsigned32	read-only	This variable specifies the amount of physical memory in MB.
STR eqlControllerBootRomVersion	1.3.6.1.4.1.12740.4.1.1.1.23	DisplayString	read-only	This variable specifies the bootrom version number.
STR eqlControllerBootRomBuildDate	1.3.6.1.4.1.12740.4.1.1.1.24	DisplayString	read-only	This variable specifies the date and time bootrom image was built.
STR eqlControllerInfoMsg	1.3.6.1.4.1.12740.4.1.1.1.25	DisplayString	read-only	This variable is basic info on the cpu at bootup.
STR eqlControllerAthenaSataVersion	1.3.6.1.4.1.12740.4.1.1.1.26	DisplayString	read-only	This variable is the Athena Sata revision for all Athena chips.
U32 eqlControllerMajorVersion	1.3.6.1.4.1.12740.4.1.1.1.27	Unsigned32	read-only	This variable specifies the major version number of the software present on the controller module.
U32 eqlControllerMinorVersion	1.3.6.1.4.1.12740.4.1.1.1.28	Unsigned32	read-only	This variable specifies the minor version number of the software present on the controller module.
U32 eqlControllerMaintenanceVersion	1.3.6.1.4.1.12740.4.1.1.1.29	Unsigned32	read-only	This variable specifies the maintenance version number of the software present on the controller module.
U32 eqlControllerSWCompatibilityLevel	1.3.6.1.4.1.12740.4.1.1.1.30	Unsigned32	read-only	This variable specifies the compatibility level of the software present on the controller module.
STR eqlControllerFullSwRevision	1.3.6.1.4.1.12740.4.1.1.1.31	DisplayString	read-only	This variable specifies controller software revision.
INT eqlControllerNVRAMBattery	1.3.6.1.4.1.12740.4.1.1.1.32	INTEGER	read-only	This variable represents the NVRAM Battery on CM. Value would be zero if there is no NVRAM Battery( old CM).
STR eqlControllerSerialNumber2	1.3.6.1.4.1.12740.4.1.1.1.33	DisplayString	read-only	This variable specifies controller serial number. Is value of SN=.The eqlControllerSerialNumber is deprecated because this value can be upto 15 characters for manhattan.
STR eqlControllerType	1.3.6.1.4.1.12740.4.1.1.1.34	DisplayString	read-only	This variable specifies the type of the controller module. Ex: Type II
C32 eqlControllerBootTime	1.3.6.1.4.1.12740.4.1.1.1.35	Counter32	read-only	This variable specifies time at which the controller was booted expressed as seconds since epoch.
eqlcontrollerNotifications	1.3.6.1.4.1.12740.4.2
eqlcontrollerConformance	1.3.6.1.4.1.12740.4.3
eqlbackplaneObjects	1.3.6.1.4.1.12740.4.4
eqlBackplaneTable	1.3.6.1.4.1.12740.4.4.1		not-accessible	EqualLogic-Dynamic Backplane Table. This table contains backplane status information. There is only one table entry for the one backplane per PSA.
eqlBackplaneEntry	1.3.6.1.4.1.12740.4.4.1.1		not-accessible	An entry (row) containing backplane status information.
I32 eqlBackplaneIndex	1.3.6.1.4.1.12740.4.4.1.1.1	Integer32	not-accessible	The index value that uniquely identifies the backplane. A well chosen number for the index is 1. It is in fact the only valid index.
STR eqlBackplanePartNum	1.3.6.1.4.1.12740.4.4.1.1.2	DisplayString	read-only	This variable specifies part number of the backplane.
STR eqlBackplaneRev	1.3.6.1.4.1.12740.4.4.1.1.3	DisplayString	read-only	This variable specifies revision of the backplane. Is value of Rev=
STR eqlBackplaneDate	1.3.6.1.4.1.12740.4.4.1.1.4	DisplayString	read-only	This variable specifies date of mfg of the backplane.
STR eqlBackplaneSN	1.3.6.1.4.1.12740.4.4.1.1.5	DisplayString	read-only	This variable specifies serial number of the backplane.
STR eqlBackplaneECO	1.3.6.1.4.1.12740.4.4.1.1.6	DisplayString	read-only	This variable specifies eco level of the backplane.
OCT eqlBackplaneEEprom	1.3.6.1.4.1.12740.4.4.1.1.7	OCTET STRING	read-only	The contents of the eeprom.
STR eqlBackplaneSN2	1.3.6.1.4.1.12740.4.4.1.1.8	DisplayString	read-only	This variable specifies the backplane serial number. Is value of SN=.The eqlBackplaneSN is deprecated because this value can be up to 15 characters for manhattan.
STR eqlBackplaneType	1.3.6.1.4.1.12740.4.4.1.1.9	DisplayString	read-only	This variable specifies the backplane type.
I32 eqlBackplaneTypeId	1.3.6.1.4.1.12740.4.4.1.1.10	Integer32	read-only	This variable specifies the backplane type as an Id. Used for Globalization.
eqlbackplaneNotifications	1.3.6.1.4.1.12740.4.5
eqlbackplaneConformance	1.3.6.1.4.1.12740.4.6
eqlemmObjects	1.3.6.1.4.1.12740.4.7
eqlEMMTable	1.3.6.1.4.1.12740.4.7.1		not-accessible	EqualLogic-Dynamic Member EMM Table. This table contains enclosure management status information. One table entry per emm. It is indexed by emm index. The number of entries is equal to the number of emms that are present in the system
eqlEMMEntry	1.3.6.1.4.1.12740.4.7.1.1		not-accessible	An entry (row) containing emm status information.
I32 eqlEMMIndex	1.3.6.1.4.1.12740.4.7.1.1.1	Integer32	not-accessible	The index value that uniquely identifies the EMM subsystem.
STR eqlEMMModel	1.3.6.1.4.1.12740.4.7.1.1.2	DisplayString	read-only	This variable specifies controller model. Is value of Part=
STR eqlEMMPartNum	1.3.6.1.4.1.12740.4.7.1.1.3	DisplayString	read-only	This variable specifies part number of the CM.
STR eqlEMMRev	1.3.6.1.4.1.12740.4.7.1.1.4	DisplayString	read-only	This variable specifies revision of the CM.
STR eqlEMMDate	1.3.6.1.4.1.12740.4.7.1.1.5	DisplayString	read-only	This variable specifies date of mfg of the CM.
STR eqlEMMSN	1.3.6.1.4.1.12740.4.7.1.1.6	DisplayString	read-only	This variable specifies serial number of the CM.
STR eqlEMMECO	1.3.6.1.4.1.12740.4.7.1.1.7	DisplayString	read-only	This variable specifies eco level of the CM.
OCT eqlEMMEEprom	1.3.6.1.4.1.12740.4.7.1.1.8	OCTET STRING	read-only	The contents of the eeprom.
STR eqlEMMSN2	1.3.6.1.4.1.12740.4.7.1.1.9	DisplayString	read-only	This variable specifies the serial number. Is value of SN=.The eqlEMMSN is deprecated because this value can be up to 15 characters for manhattan.
eqlemmNotifications	1.3.6.1.4.1.12740.4.8
eqlemmConformance	1.3.6.1.4.1.12740.4.9
eqldaughtercardObjects	1.3.6.1.4.1.12740.4.10
eqlDaughterCardTable	1.3.6.1.4.1.12740.4.10.1		not-accessible	EqualLogic-Dynamic Member DaughterCard Table. This table contains daughter card information. One table entry per daughter card. It is indexed by daughter card index. The number of entries is equal to the number of daughter cards that are present in the system
eqlDaughterCardEntry	1.3.6.1.4.1.12740.4.10.1.1		not-accessible	An entry (row) containing daughter card information.
I32 eqlDaughterCardIndex	1.3.6.1.4.1.12740.4.10.1.1.1	Integer32	not-accessible	The index value that uniquely identifies the DaughterCard subsystem. 1 based
STR eqlDaughterCardModel	1.3.6.1.4.1.12740.4.10.1.1.2	DisplayString	read-only	This variable specifies controller model. Is value of Part=
STR eqlDaughterCardPartNum	1.3.6.1.4.1.12740.4.10.1.1.3	DisplayString	read-only	This variable specifies part number of the daughter card.
STR eqlDaughterCardRev	1.3.6.1.4.1.12740.4.10.1.1.4	DisplayString	read-only	This variable specifies revision of the daughter card.
STR eqlDaughterCardDate	1.3.6.1.4.1.12740.4.10.1.1.5	DisplayString	read-only	This variable specifies date of mfg of the daughter card.
STR eqlDaughterCardSN	1.3.6.1.4.1.12740.4.10.1.1.6	DisplayString	read-only	This variable specifies serial number of the daughter card.
STR eqlDaughterCardECO	1.3.6.1.4.1.12740.4.10.1.1.7	DisplayString	read-only	This variable specifies eco level of the daughter card.
OCT eqlDaughterCardEEprom	1.3.6.1.4.1.12740.4.10.1.1.8	OCTET STRING	read-only	The contents of the eeprom.
eqldaughtercardNotifications	1.3.6.1.4.1.12740.4.11
eqldaughtercardConformance	1.3.6.1.4.1.12740.4.12
eqlchannelcardObjects	1.3.6.1.4.1.12740.4.13
eqlChannelCardTable	1.3.6.1.4.1.12740.4.13.1		not-accessible	EqualLogic-Dynamic Member ChannelCard Table. This table contains channel card information. One table entry per channel card. It is indexed by channel card index. The number of entries is equal to the number of channel cards that are present in the system
eqlChannelCardEntry	1.3.6.1.4.1.12740.4.13.1.1		not-accessible	An entry (row) containing channel card information.
U32 eqlChannelCardIndex	1.3.6.1.4.1.12740.4.13.1.1.1	Unsigned32	not-accessible	The index value that uniquely identifies the ChannelCard subsystem.
STR eqlChannelCardSerialNumber	1.3.6.1.4.1.12740.4.13.1.1.2	DisplayString	read-only	This variable specifies serial number of the card.
STR eqlChannelCardFirmwareRev	1.3.6.1.4.1.12740.4.13.1.1.3	DisplayString	read-only	This variable specifies firmware revision of the card.
STR eqlChannelCardInitRev	1.3.6.1.4.1.12740.4.13.1.1.4	DisplayString	read-only	This variable specifies revision of the initialization configuration file.
INT eqlChannelCardStatus	1.3.6.1.4.1.12740.4.13.1.1.5	INTEGER	read-only	This variable specifies the status of the channel card .
eqlsfpObjects	1.3.6.1.4.1.12740.4.14
eqlSFPTable	1.3.6.1.4.1.12740.4.14.1		not-accessible	EqualLogic-Dynamic Member SFP Table. This table contains SFP information. One table entry per SFP. It is indexed by SFP index. The number of entries is equal to the number of SFPs that are present in the system
eqlSFPEntry	1.3.6.1.4.1.12740.4.14.1.1		not-accessible	An entry (row) containing SFP information.
U32 eqlSFPIndex	1.3.6.1.4.1.12740.4.14.1.1.1	Unsigned32	not-accessible	The index value that uniquely identifies the SFP.
INT eqlSFPMode	1.3.6.1.4.1.12740.4.14.1.1.2	INTEGER	read-only	This variable specifies the mode of the SFP.
INT eqlSFPIfIndex	1.3.6.1.4.1.12740.4.14.1.1.3	INTEGER	read-only	Index of the interface attached to the SFP.
INT eqlSFPIdentifier	1.3.6.1.4.1.12740.4.14.1.1.4	INTEGER	read-only	Identifies the SFP.
INT eqlSFPConnector	1.3.6.1.4.1.12740.4.14.1.1.5	INTEGER	read-only	type of the SFP connector.
INT eqlSFPBitrate	1.3.6.1.4.1.12740.4.14.1.1.6	INTEGER	read-only	Bit rate of the SFP in units of 100 Mbits/sec. 103 => 10300 => 10 Gbps
INT eqlSFPLength1	1.3.6.1.4.1.12740.4.14.1.1.7	INTEGER	read-only	If Mode is single mode, length in kilometres, Mode is multi mode, length in units of 10metres of 50/125 um fiber.
INT eqlSFPLength2	1.3.6.1.4.1.12740.4.14.1.1.8	INTEGER	read-only	If Mode is single mode, length in units of 100metres, Mode is multi mode, length in units of 10metres of 62/125 um fiber.
STR eqlSFPVendorName	1.3.6.1.4.1.12740.4.14.1.1.9	DisplayString	read-only	This variable specifies vendor name of the SFP.
STR eqlSFPPartNumber	1.3.6.1.4.1.12740.4.14.1.1.10	DisplayString	read-only	This variable specifies part number of the SFP.
STR eqlSFPFirmwareRev	1.3.6.1.4.1.12740.4.14.1.1.11	DisplayString	read-only	This variable specifies firmware revision of the SFP.
STR eqlSFPSerialNumber	1.3.6.1.4.1.12740.4.14.1.1.12	DisplayString	read-only	This variable specifies serial number of the SFP.
STR eqlSFPDateCode	1.3.6.1.4.1.12740.4.14.1.1.13	DisplayString	read-only	This variable specifies date of manufacture of the SFP.
INT eqlSFPStatus	1.3.6.1.4.1.12740.4.14.1.1.14	INTEGER	read-only	This variable specifies the status of the SFP.

RFC description

Dell EqualLogic storage array controller MIB for monitoring controller status, backplanes, and memory management modules.

Start monitoring Dell EqualLogic PS-series iSCSI SAN storage array (RAID controller identity/health) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download EQLCONTROLLER-MIB