FIBRONICS-PROPRIETARY-FX8210-B-MIB

All MIBs › FIBRONICS-PROPRIETARY-FX8210-B-MIB

Category: Vendor: Fibronics (Legacy)

Description: Fibronics proprietary MIB for the FX8210-B switch model, providing chassis, port, and switching configuration management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FIBRONICS-PROPRIETARY-FX8210-B-MIB?

FIBRONICS-PROPRIETARY-FX8210-B-MIB is a proprietary enterprise MIB from Fibronics specific to the FX8210-B switch model, a fiber/Ethernet switching platform. Based on its short description, it covers chassis-level, port-level, and general switching configuration management for this particular hardware model. No module description text or sample objects were available in the source data for this entry, so specific object or table names cannot be independently confirmed, but MIBs of this type for a named chassis product typically expose hardware inventory (module/slot presence), port operational state, and basic switching configuration as a way of confirming the chassis and its ports are physically healthy and correctly configured. It is a standalone proprietary MIB with no stated dependency on external standard MIBs. It would be deployed wherever Fibronics FX8210-B switches are installed, likely in industrial, transportation, or ruggedized network environments that Fibronics traditionally serves, where administrators would need a FIBRONICS-PROPRIETARY-FX8210-B-MIB download from Fibronics to compile it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in FIBRONICS-PROPRIETARY-FX8210-B-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Fibronics FX8210-B switch

Monitoring Examples

No sample objects were available for this module, so no specific object or table names can be cited; typical use for a chassis-specific MIB like this would be polling per-slot/module presence and per-port link status to confirm switch hardware is operating normally, but this could not be confirmed from the available data.

What Can Be Monitored

chassis/module presence (unconfirmed, no sample objects available)

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
NetworkAddress
TimeTicks
enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
dec	1.3.6.1.4.1.22.2
dec2	1.3.6.1.4.1.22.4
dec2perm	1.3.6.1.4.1.22.4.2
dec2run	1.3.6.1.4.1.22.4.1
decperm	1.3.6.1.4.1.22.2.2
decrun	1.3.6.1.4.1.22.2.1
INT fddiAttachChge	1.3.6.1.4.1.22.7.4	INTEGER	read-only	At system startup, this object is set to FALSE. The SNMP agent then sets this flag to TRUE when any ATTACHMENT object in the system is set by the manager.
INT fddiMacChge	1.3.6.1.4.1.22.7.2	INTEGER	read-only	At system startup, this object is set to FALSE. The SNMP agent then sets this flag to TRUE when any MAC object in the system is set by the manager.
INT fddiPortChge	1.3.6.1.4.1.22.7.3	INTEGER	read-only	At system startup, this object is set to FALSE. The SNMP agent then sets this flag to TRUE when any PORT object in the system is set by the manager.
INT fddiSmtChge	1.3.6.1.4.1.22.7.1	INTEGER	read-only	At system startup, this object is set to FALSE. The SNMP agent then sets this flag to TRUE when any SMT object in the system is set by the manager.
INT flashIndex	1.3.6.1.4.1.22.5.2.12.1.1	INTEGER	read-only	A unique index value for each flash memory bank.
INT flashState	1.3.6.1.4.1.22.5.2.12.1.3	INTEGER	read-only
OCT flashVersion	1.3.6.1.4.1.22.5.2.12.1.2	OCTET STRING	read-only	Indicates the version contained in this flash memory bank. If the flash memory bank is uninitialized or invalid, this object will contain a NULL string
INT pAddrBcAddr	1.3.6.1.4.1.22.6.2.2.1.3	INTEGER	read-write	As defined in rfc1156. 'The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1.' The default value for this item is all-ones.
INT pAddrDbcast	1.3.6.1.4.1.22.6.2.2.1.4	INTEGER	read-write	Allows the user to set the directed broadcast parameter of an IP network. The default is 'no directed broadcast'.
INT pAddrIfIndex	1.3.6.1.4.1.22.6.2.2.1.2	INTEGER	read-write	The interface this IP Address being defined on.
IP pAddrOurAddr	1.3.6.1.4.1.22.6.2.2.1.1	IpAddress	read-write	The IP Address being defined in this entry.
INT pAddrRipMetric	1.3.6.1.4.1.22.6.2.2.1.5	INTEGER	read-write	A number from 1 to 15 used to calculate the metrics to given destinations, RIP will add this metric to metrics received from other RIP gateways on this (sub)network. In effect, this can be used to prioritize the (sub)network used for a destination reachable via more than one Brouter (sub)network. Default value is 1.
INT pAddrRipState	1.3.6.1.4.1.22.6.2.2.1.7	INTEGER	read-write	The state of RIP for this entry.
INT pAddrState	1.3.6.1.4.1.22.6.2.2.1.6	INTEGER	read-write	The state of this entry. To remove an entry from the table, simply set this field to INACTIVE.
pbcEntry	1.3.6.1.4.1.22.2.2.1.2.1		not-accessible	The INDEX value specified should correspond to the index of the circuit of the desired entry.
INT pbcMrout	1.3.6.1.4.1.22.2.2.1.2.1.1	INTEGER	read-write
INT pbcRpri	1.3.6.1.4.1.22.2.2.1.2.1.2	INTEGER	read-write
pbcTable	1.3.6.1.4.1.22.2.2.1.2		not-accessible
INT pccCost	1.3.6.1.4.1.22.2.2.1.1.1.3	INTEGER	read-write
pccEntry	1.3.6.1.4.1.22.2.2.1.1.1		not-accessible
INT pccHTimer	1.3.6.1.4.1.22.2.2.1.1.1.4	INTEGER	read-write
INT pccIndex	1.3.6.1.4.1.22.2.2.1.1.1.1	INTEGER	read-only
INT pccState	1.3.6.1.4.1.22.2.2.1.1.1.2	INTEGER	read-write
pccTable	1.3.6.1.4.1.22.2.2.1.1		not-accessible
pcircs	1.3.6.1.4.1.22.2.2.1
INT pDecDefaults	1.3.6.1.4.1.22.2.2.3	INTEGER	read-write	When this object is set to 1, the side effect will be to cause the unit to reset all the objects defined under the subtree decperm to their default values. Reading this object has no meaning. The integer value 1 will be returned to a get or get-next request.
IP pDftGw	1.3.6.1.4.1.22.6.2.4	IpAddress	read-write	The IP address of the permanent default gateway.
INT pEepVer	1.3.6.1.4.1.22.5.2.4	INTEGER	read-only	Version number supported in the EEPROM.
INT pIfAdminStat	1.3.6.1.4.1.22.6.2.3.1.6	INTEGER	read-write	Specifies the desired initial state of the interface (i.e., should the interface be started without direction from the operator). See rfc1156 for state codes.
INT pIfArpStat	1.3.6.1.4.1.22.6.2.3.1.4	INTEGER	read-write	Allows the user to turn ARP on and off for the interface.
INT pIfBcMask	1.3.6.1.4.1.22.6.2.3.1.7	INTEGER	read-write	When set to ON, the brouter will broadcast its address mask on start up. When set to OFF, the brouter will not broadcast its address mask on start up.
INT pIfIndex	1.3.6.1.4.1.22.6.2.3.1.1	INTEGER	read-only	Interface ID that uniquely identifies this interface among all other interfaces in this brouter.
INT pIfMtu	1.3.6.1.4.1.22.6.2.3.1.3	INTEGER	read-write	Maximum Transmission Unit size that is supported on this network. The largest value acceptable for Ethernet is 1500 and for FDDI is 4500.
INT pIfPArpStat	1.3.6.1.4.1.22.6.2.3.1.5	INTEGER	read-write	Allows the user to turn proxy ARP on and off for the interface.
INT pIfType	1.3.6.1.4.1.22.6.2.3.1.2	INTEGER	read-write	Specifies the type of Physical and Data-Link layers. See rfc1156 for protocol codes.
INT pIpDefaults	1.3.6.1.4.1.22.6.2.5	INTEGER	read-write	When this object is set to 1, the side effect will be to cause the unit to reset all the objects defined under the subtree propIpPerm to their default values. Reading this object has no meaning. The integer value 1 will be returned to a get or get-next request.
pIpIfEntry	1.3.6.1.4.1.22.6.2.3.1		not-accessible	Objects required for a single entry in the pIpIfEntry.
pIpIfTable	1.3.6.1.4.1.22.6.2.3		not-accessible	The permanent list of parameters used by this router to initialize its ifTable as well as the extention table rIpIfTable.
pIpMaskEntry	1.3.6.1.4.1.22.6.2.1.1		not-accessible	Items contained in the permanent Address Mask Table.
pIpMaskTable	1.3.6.1.4.1.22.6.2.1		not-accessible	The permanent list of address masks used by this router to initialize it's rIpMaskTable.
pIpOurAddrEntry	1.3.6.1.4.1.22.6.2.2.1		not-accessible	Objects required for a single entry in the pIpOurAddrTable. To add a pIpOurAddrEntry to the pIpOurAddrTable, the pAddrState is the validating item. Therefore, pAddrState must be the last item in the message when adding an entry. To add to the pIpOurAddrTable the agent requires all 7 items listed below. There are 3 default values provided by the agent for this entry: pAddrBcAddr defaults to -1, pAddrDbcast defaults to 'no directed broadcast' and pAddrRipMetric defaults to 1. To remove an pIpOurAddrEntry, the pAddrState should be set to INACTIVE.
pIpOurAddrTable	1.3.6.1.4.1.22.6.2.2		not-accessible	The permanent list of parameters used by this router to initialize its ipAddrTable as well as the extention table rIpOurAddrTable.
IP pMask	1.3.6.1.4.1.22.6.2.1.1.2	IpAddress	read-write	The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
IP pMaskNet	1.3.6.1.4.1.22.6.2.1.1.1	IpAddress	read-write	The IP network this mask is defined for.
INT pMaskState	1.3.6.1.4.1.22.6.2.1.1.3	INTEGER	read-write	The state of this entry. To remove an entry from the table, simply set this field to INACTIVE.
pnodes	1.3.6.1.4.1.22.2.2.2
OCT pnRpAddr	1.3.6.1.4.1.22.2.2.2.1.13	OCTET STRING	read-write
INT pnRpAMaxC	1.3.6.1.4.1.22.2.2.2.1.1	INTEGER	read-write
INT pnRpAMaxH	1.3.6.1.4.1.22.2.2.2.1.2	INTEGER	read-write
INT pnRpBRtTmr	1.3.6.1.4.1.22.2.2.2.1.3	INTEGER	read-write
INT pnRpBSize	1.3.6.1.4.1.22.2.2.2.1.4	INTEGER	read-write
INT pnRpMAddr	1.3.6.1.4.1.22.2.2.2.1.5	INTEGER	read-write
INT pnRpMArea	1.3.6.1.4.1.22.2.2.2.1.6	INTEGER	read-write
INT pnRpMaxBNR	1.3.6.1.4.1.22.2.2.2.1.7	INTEGER	read-write
INT pnRpMaxBR	1.3.6.1.4.1.22.2.2.2.1.8	INTEGER	read-write
INT pnRpMaxCost	1.3.6.1.4.1.22.2.2.2.1.9	INTEGER	read-write
INT pnRpMaxHops	1.3.6.1.4.1.22.2.2.2.1.10	INTEGER	read-write
INT pnRpMaxV	1.3.6.1.4.1.22.2.2.2.1.11	INTEGER	read-write
INT pnRpRstDaddr	1.3.6.1.4.1.22.2.2.2.1.15	INTEGER	read-write
INT pnRpType	1.3.6.1.4.1.22.2.2.2.1.12	INTEGER	read-write
INT pnRpUseL2A	1.3.6.1.4.1.22.2.2.2.1.14	INTEGER	read-write
pnRtParms	1.3.6.1.4.1.22.2.2.2.1
INT pPMibVer	1.3.6.1.4.1.22.5.2.2	INTEGER	read-only	Proprietary mib version number.
propFddi	1.3.6.1.4.1.22.7
propIp	1.3.6.1.4.1.22.6
propIpPerm	1.3.6.1.4.1.22.6.2
propIpRun	1.3.6.1.4.1.22.6.1
propSys	1.3.6.1.4.1.22.5
propSysPerm	1.3.6.1.4.1.22.5.2
propSysRun	1.3.6.1.4.1.22.5.1
IP pTrapAddrAddr	1.3.6.1.4.1.22.3.2.1.1.1	IpAddress	read-write	The IP address of the network management entity to which traps (of the type specified in this table entry) should be sent.
OCT pTrapAddrComm	1.3.6.1.4.1.22.3.2.1.1.2	OCTET STRING	read-write	Community string to be used in SNMP message generated to the receiving SNMP protocol entity.
pTrapAddrEntry	1.3.6.1.4.1.22.3.2.1.1		not-accessible	This object contains permanent information about an individual trap destination.
INT pTrapAddrState	1.3.6.1.4.1.22.3.2.1.1.5	INTEGER	read-write	The state of this entry in the trap address table. Setting this object to INACTIVE removes the corresponding entry from the table.
pTrapAddrTbl	1.3.6.1.4.1.22.3.2.1		not-accessible	This table contains permanent information about destinations to which traps should be directed. Setting the pTrapAddrState to INACTIVE removes an entry from the table. This information is used to initialize the rTrapAddrTbl on unit startup.
OCT pTrapAddrType	1.3.6.1.4.1.22.3.2.1.1.4	OCTET STRING	read-write	A bit-encoded string, 1 byte in length, which contains information about which trap(s) should be directed to the management entity described by this table entry. The following list identifies the trap types and corresponding bit values. TRAP-STANDARD-MIB 1000 0000 TRAP-DIAG 0100 0000 TRAP-GNRL-PROPRIETARY 0010 0000 TRAP-ROUT 0001 0000 TRAP-DEBUG 0000 1000 TRAP-PROP-DEC4 0000 0100
INT pTrapAddrVer	1.3.6.1.4.1.22.3.2.1.1.3	INTEGER	read-write	The trap address table version number. The current (and only valid) version number is 1.
INT pTrapDefaults	1.3.6.1.4.1.22.3.2.2	INTEGER	read-write	When this object is set to 1, the side effect will be to cause the unit to reset all the objects defined under the subtree traperm to their default values. Reading this object has no meaning. The integer value 1 will be returned to a get or get-next request.
INT pUBrSw	1.3.6.1.4.1.22.5.2.8	INTEGER	read-write	Permanently stored (EEPROM) value for bridging status. See rUBrSw for a complete description. The default value for this object is ON.
INT pUDecSw	1.3.6.1.4.1.22.5.2.7	INTEGER	read-write	Permanently stored (EEPROM) value for DECnet routing status. See rUDecSw for a complete description. The default value for this object is ON.
INT pUDefaults	1.3.6.1.4.1.22.5.2.11	INTEGER	read-write	When this object is set to 1, the side effect will be to cause the unit to reset all the objects defined under the subtree propSysPerm to their default values. Reading this object has no meaning. The integer value 1 will be returned to a get or get-next request.
pUFlashEntry	1.3.6.1.4.1.22.5.2.12.1		not-accessible	Information about a particular bank of flash memory.
pUFlashTable	1.3.6.1.4.1.22.5.2.12		not-accessible	Contains the information needed for Flash memory maintenance.
INT pUIpCfg	1.3.6.1.4.1.22.5.2.9	INTEGER	read-only	Permanently stored (EEPROM) value for IP configuration. See rUIpCfg for a complete description. The default value for this object is determined by the IP address stored in the permanent database.
INT pUIpSw	1.3.6.1.4.1.22.5.2.6	INTEGER	read-write	Permanently stored (EEPROM) value for IP routing status. See rUIpSw for a complete description. The default value for this object is ON.
INT pUloadType	1.3.6.1.4.1.22.5.2.50	INTEGER	read-write	This object indicates the type of download to be exercised the next time the unit is loaded. It is a choice of: USER 1 MFG 2 DEV 3
OCT pULoadVersion	1.3.6.1.4.1.22.5.2.10	OCTET STRING	read-write	Permanently stored (EEPROM) value for the desired load version. This value of this object indicates which flash-stored version is to be initiated upon reset of this unit.
INT pysmiFakeCol808	1.3.6.1.4.1.22.2.1.1.3.1.4294967295	INTEGER	not-accessible
INT pysmiFakeCol809	1.3.6.1.4.1.22.2.1.1.4.1.4294967295	INTEGER	not-accessible
INT pysmiFakeCol810	1.3.6.1.4.1.22.2.2.1.2.1.4294967295	INTEGER	not-accessible
INT pysmiFakeCol811	1.3.6.1.4.1.22.4.1.1.1.4294967295	INTEGER	not-accessible
INT pysmiFakeCol812	1.3.6.1.4.1.22.4.1.2.1.4294967295	INTEGER	not-accessible
INT pysmiFakeCol813	1.3.6.1.4.1.22.4.1.3.1.4294967295	INTEGER	not-accessible
IP pysmiFakeCol814	1.3.6.1.4.1.22.6.1.2.1.4294967295	IpAddress	not-accessible
INT pysmiFakeCol815	1.3.6.1.4.1.22.6.1.3.1.4294967295	INTEGER	not-accessible
INT pysmiFakeCol816	1.3.6.1.4.1.22.6.1.5.1.4294967295	INTEGER	not-accessible
INT pysmiFakeCol817	1.3.6.1.4.1.22.6.1.5.1.4294967294	INTEGER	not-accessible
IP pysmiFakeCol818	1.3.6.1.4.1.22.6.1.5.1.4294967293	IpAddress	not-accessible
IP pysmiFakeCol819	1.3.6.1.4.1.22.6.1.6.1.4294967295	IpAddress	not-accessible
INT raCIdx	1.3.6.1.4.1.22.2.1.3.1.1.2	INTEGER	read-only
INT raCost	1.3.6.1.4.1.22.2.1.3.1.1.3	INTEGER	read-only
INT rAddrDbcast	1.3.6.1.4.1.22.6.1.2.1.1	INTEGER	read-write	Allows the user to set the directed broadcast parameter of an IP network. Default value is 'no directed broadcast'.
INT rAddrRipMetric	1.3.6.1.4.1.22.6.1.2.1.2	INTEGER	read-write	A number from 1 to 15 used to calculate the metrics to given destinations, RIP will add this metric to metrics received from other RIP gateways on this (sub)network. In effect, this can be used to prioritize the (sub)network used for a destination reachable via more than one Brouter (sub)network. Default value is 1.
INT rAddrRipState	1.3.6.1.4.1.22.6.1.2.1.3	INTEGER	read-write	Defines the current state of the RIP protocol for this IP network. The default value is ON.
INT rAddrState	1.3.6.1.4.1.22.6.1.2.1.4	INTEGER	read-write	The state of this entry. To remove an entry from the table, simply set this field to INACTIVE.
INT raHops	1.3.6.1.4.1.22.2.1.3.1.1.4	INTEGER	read-only
OCT raNext	1.3.6.1.4.1.22.2.1.3.1.1.5	OCTET STRING	read-only
IP rAnncDestAddr	1.3.6.1.4.1.22.6.1.12.1.2	IpAddress	read-write	The IP address of the gateway being restricted.
IP rAnncNet	1.3.6.1.4.1.22.6.1.12.1.1	IpAddress	read-write	The IP address this unit recognizes on the (sub)network being restricted.
INT rAnncRstState	1.3.6.1.4.1.22.6.1.12.1.3	INTEGER	read-write	The state of this entry. To remove an entry from the table, simply set this field to INACTIVE.
INT raNum	1.3.6.1.4.1.22.2.1.3.1.1.1	INTEGER	read-only
raParmEntry	1.3.6.1.4.1.22.2.1.3.1.1		not-accessible
raParmTbl	1.3.6.1.4.1.22.2.1.3.1		not-accessible
rareas	1.3.6.1.4.1.22.2.1.3
CTR rArpInErr	1.3.6.1.4.1.22.6.1.16.2	Counter	read-only	The number of ARP messages which the entity received but determined as having errors (bad ARP opcode, bad protocol, bad hardware type).
CTR rArpInIll	1.3.6.1.4.1.22.6.1.16.3	Counter	read-only	The number of illegal ARP messages received: Target Protocol Address (tpa) and Sender Protocol Address (spa) belongs to different networks, tpa, spa are illegal, tpa is broadcast etc.
CTR rArpInMsgs	1.3.6.1.4.1.22.6.1.16.1	Counter	read-only	The total number of ARP messages which the entity received. Note that this counter includes all those counted by 'Inbound Errors'.
CTR rArpInNotMe	1.3.6.1.4.1.22.6.1.16.7	Counter	read-only	The number of ARP Requests 'Not For Me messages' received.
CTR rArpInOpCd	1.3.6.1.4.1.22.6.1.16.4	Counter	read-only	The number of ARP messages received, with bad opcode. Neither request nor reply.
CTR rArpInRep	1.3.6.1.4.1.22.6.1.16.6	Counter	read-only	The number of ARP Reply messages received.
CTR rArpInReq	1.3.6.1.4.1.22.6.1.16.5	Counter	read-only	The number of ARP Request messages received.
CTR rArpOutErr	1.3.6.1.4.1.22.6.1.16.9	Counter	read-only	The number of ARP messages which this entity did not send due to problems discovered within ARP such as a lack of buffers. This value should not include errors discovered outside the ARP layer such as the inability of the data link layer to send the message.
CTR rArpOutMsgs	1.3.6.1.4.1.22.6.1.16.8	Counter	read-only	The total number of ARP messages which this entity attempted to send. Note that this counter includes all those counted by 'Outbound Errors'.
CTR rArpOutRep	1.3.6.1.4.1.22.6.1.16.11	Counter	read-only	The number of ARP Reply messages sent.
CTR rArpOutReq	1.3.6.1.4.1.22.6.1.16.10	Counter	read-only	The number of ARP Request messages sent.
CTR rArpResReq	1.3.6.1.4.1.22.6.1.16.12	Counter	read-only	The number of resolve requests to this entity made by an upper level protocol.
INT rAtAge	1.3.6.1.4.1.22.6.1.5.1.2	INTEGER	read-only	The age of the entry in minutes.
INT rAtStatic	1.3.6.1.4.1.22.6.1.5.1.1	INTEGER	read-only	Defines an entry as static or dynamic. A static entry is one that has been entered manually by the network administrator and can be changed only by the network administrator. The routing protocols never overwrite a static entry. A dynamic entry is one created by the routing protocols and is updated by them as per standard definitions.
OCT rbcDrout	1.3.6.1.4.1.22.2.1.1.3.1.1	OCTET STRING	read-only
rbcEntry	1.3.6.1.4.1.22.2.1.1.3.1		not-accessible	The INDEX value specified should correspond to the index of the circuit of the desired entry.
INT rbcMrout	1.3.6.1.4.1.22.2.1.1.3.1.2	INTEGER	read-write
INT rbcRpri	1.3.6.1.4.1.22.2.1.1.3.1.3	INTEGER	read-write
rbcTable	1.3.6.1.4.1.22.2.1.1.3		not-accessible
OCT rBlHAddr	1.3.6.1.4.1.22.4.1.2.1.1	OCTET STRING	read-only
rBlParmEntry	1.3.6.1.4.1.22.4.1.2.1		not-accessible	The INDEX value specified should correspond to the index of the interface of the desired entry.
rBlParmTbl	1.3.6.1.4.1.22.4.1.2		not-accessible
INT rccBSize	1.3.6.1.4.1.22.2.1.1.2.1.5	INTEGER	read-only
INT rccCost	1.3.6.1.4.1.22.2.1.1.2.1.4	INTEGER	read-write
rccEntry	1.3.6.1.4.1.22.2.1.1.2.1		not-accessible
INT rccHTimer	1.3.6.1.4.1.22.2.1.1.2.1.6	INTEGER	read-write
INT rccIndex	1.3.6.1.4.1.22.2.1.1.2.1.1	INTEGER	read-only
INT rccLine	1.3.6.1.4.1.22.2.1.1.2.1.7	INTEGER	read-only
CTR rCCntAdjDown	1.3.6.1.4.1.22.2.1.1.4.1.5	Counter	read-only
CTR rCCntOPktsOut	1.3.6.1.4.1.22.2.1.1.4.1.2	Counter	read-only
rCCntrEntry	1.3.6.1.4.1.22.2.1.1.4.1		not-accessible	The INDEX value specified should correspond to the index of the circuit of the desired entry.
rCCntrs	1.3.6.1.4.1.22.2.1.1.4		not-accessible
CTR rCCntTePktsIn	1.3.6.1.4.1.22.2.1.1.4.1.1	Counter	read-only
CTR rCCntTrPktsIn	1.3.6.1.4.1.22.2.1.1.4.1.3	Counter	read-only
CTR rCCntTrPktsOut	1.3.6.1.4.1.22.2.1.1.4.1.4	Counter	read-only
INT rccState	1.3.6.1.4.1.22.2.1.1.2.1.2	INTEGER	read-write
rccTable	1.3.6.1.4.1.22.2.1.1.2		not-accessible
INT rccType	1.3.6.1.4.1.22.2.1.1.2.1.3	INTEGER	read-only
INT rCircNum	1.3.6.1.4.1.22.2.1.1.1	INTEGER	read-only
rcircs	1.3.6.1.4.1.22.2.1.1
rClParmEntry	1.3.6.1.4.1.22.4.1.1.1		not-accessible	The INDEX value specified should correspond to the index of the interface of the desired entry.
rClParmTbl	1.3.6.1.4.1.22.4.1.1		not-accessible
INT rClState	1.3.6.1.4.1.22.4.1.1.1.1	INTEGER	read-write
INT rClSubSt	1.3.6.1.4.1.22.4.1.1.1.2	INTEGER	read-only
INT rDDevStat	1.3.6.1.4.1.22.5.1.4.1.2	INTEGER	read-write	Indicates whether the development level debug messages for this module should be reported to the NMS.
rDebugEntry	1.3.6.1.4.1.22.5.1.4.1		not-accessible	Variables needed to maintain the FPP debug mechanisms.
rDebugTable	1.3.6.1.4.1.22.5.1.4		not-accessible	A table of entries used to manage debug reporting from the Brouter.
IP rDftGw	1.3.6.1.4.1.22.6.1.4	IpAddress	read-write	The IP address of the default gateway.
INT rDRunStat	1.3.6.1.4.1.22.5.1.4.1.3	INTEGER	read-write	Indicates whether the runtime network diagnostic messages for this module should be reported to the NMS.
INT rDTaskId	1.3.6.1.4.1.22.5.1.4.1.1	INTEGER	read-only	Task-id assigned to the task being debugged. Task-id`s are assigned as follows: IP-ID 2 ICMP-ID 3 RIP-ID 4 UDP-ID 6 ARP-ID 7 KSMAP-ID 8 FMAINP-ID 9 SYSTEM-ID 10 PROXY-ARP-ID 11
CTR rElBadD	1.3.6.1.4.1.22.4.1.3.1.13	Counter	read-only
CTR rElBcBIn	1.3.6.1.4.1.22.4.1.3.1.3	Counter	read-only
CTR rElBcFIn	1.3.6.1.4.1.22.4.1.3.1.4	Counter	read-only
CTR rElCDetF	1.3.6.1.4.1.22.4.1.3.1.11	Counter	read-only
rElCountEntry	1.3.6.1.4.1.22.4.1.3.1		not-accessible	The INDEX value specified should correspond to the index of the interface of the desired entry.
rElCountTbl	1.3.6.1.4.1.22.4.1.3		not-accessible
CTR rElF1Col	1.3.6.1.4.1.22.4.1.3.1.8	Counter	read-only
CTR rElFDef	1.3.6.1.4.1.22.4.1.3.1.7	Counter	read-only
CTR rElFMCol	1.3.6.1.4.1.22.4.1.3.1.9	Counter	read-only
CTR rElFrIn	1.3.6.1.4.1.22.4.1.3.1.1	Counter	read-only
CTR rElFrOut	1.3.6.1.4.1.22.4.1.3.1.2	Counter	read-only
CTR rElInF	1.3.6.1.4.1.22.4.1.3.1.12	Counter	read-only
CTR rElMcBIn	1.3.6.1.4.1.22.4.1.3.1.5	Counter	read-only
CTR rElMcFIn	1.3.6.1.4.1.22.4.1.3.1.6	Counter	read-only
CTR rElNoBuf	1.3.6.1.4.1.22.4.1.3.1.15	Counter	read-only
CTR rElOutF	1.3.6.1.4.1.22.4.1.3.1.10	Counter	read-only
CTR rElOvRun	1.3.6.1.4.1.22.4.1.3.1.14	Counter	read-only
INT rFddiIfIndex	1.3.6.1.4.1.22.5.1.2	INTEGER	read-only	The snmp Fddi interface Number
INT rIfArpStat	1.3.6.1.4.1.22.6.1.3.1.1	INTEGER	read-write	Allows the user to turn ARP on and off for the interface.
INT rIfBcMask	1.3.6.1.4.1.22.6.1.3.1.3	INTEGER	read-write	When set to ON, Brouter will broadcast its address mask on start up. When set to OFF, the Brouter will not broadcast its address mask on start up.
INT rIfPArpStat	1.3.6.1.4.1.22.6.1.3.1.2	INTEGER	read-write	Allows the user to turn proxy ARP on and off for the interface.
rIpArpStats	1.3.6.1.4.1.22.6.1.16
rIpAtEntry	1.3.6.1.4.1.22.6.1.5.1		not-accessible	Proprietary extensions for the rfc1156 defined atEntry. A proprietary atTable entry contains 3 standard objects and the 2 proprietary objects listed below. The standard objects are: atIfIndex, atPhysAddress and atNetAddress. To add an atEntry to the atTable, MIB-II defines the atPhysAddress as the validating item. Therefore, atPhysAddress must be the last item in the message when adding an entry. To add to the atTable the user must provide the atNetAddress followed by the atPhysAddress. The 2 proprietary objects associated with this entry are provided by the agent. The rAtAge is incremented as the entry ages and the rAtStatic entry is set to static. All atEntries manually defined are considered static and are not removed by the agent until specifically requested by the manager. To remove an atEntry, the atPhysAddress should be set to a NULL string. The INDEX value is constructed from the interface index of the desired entry, the integer value 1, and the network address of the desired entry.
rIpAtTable	1.3.6.1.4.1.22.6.1.5		not-accessible	Proprietary extensions for the rfc1156 defined atTable.
rIpIfEntry	1.3.6.1.4.1.22.6.1.3.1		not-accessible	Proprietary extensions for the rfc1156 defined ifEntry. The INDEX value specified should correspond to the index of the interface of the desired entry.
rIpIfTable	1.3.6.1.4.1.22.6.1.3		not-accessible	Proprietary extensions for the rfc1156 defined ifTable.
rIpMaskEntry	1.3.6.1.4.1.22.6.1.1.1		not-accessible	Items contained in the runtime Address Mask Table.
rIpMaskTable	1.3.6.1.4.1.22.6.1.1		not-accessible	The list of address masks used by this router for determining its subnets.
rIpOurAddrEntry	1.3.6.1.4.1.22.6.1.2.1		not-accessible	Proprietary extensions for the rfc1156 defined ipAddrEntry. A proprietary ipAddrTable entry contains 4 standard objects and the 4 proprietary objects listed below. The standard objects are: ipAdEntAddr, ipAdEntIfIndex, ipAdEntNetMask and ipAdEntBcastAddr. To add an ipAddrEntry to the ipAddrTable, the rAddrState is the validating item. Therefore, rAddrState must be the last item in the message when adding an entry. The ipAdEntNetMask is determined by the agent. There is a separate mechanism that allows the user to define address masks for the unit. See rIpMaskTable and pIpMaskTable. To add to the ipAddrTable the agent requires the ipAdEntAddr, ipAdEntIfIndex, ipAdEntBcastAddr, rAddrDBcast, rAddrRipMetric and the rAddrRipState followed by the rAddrState. There are 4 default values provided by the agent for this entry: ipAdEntBcastAddr defaults to 'all ones', rAddrDbcast defaults to 'no directed broadcast', rAddrRipState defaults to ON and rAddrRipMetric defaults to 1. To remove an ipAddrEntry, the rAddrState should be set to INACTIVE. The INDEX value specified should correspond to the IP address of the desired entry.
rIpOurAddrTable	1.3.6.1.4.1.22.6.1.2		not-accessible	Proprietary extensions for the rfc1156 defined ipAddrTable.
rIpPArp	1.3.6.1.4.1.22.6.1.17
rIpRipStats	1.3.6.1.4.1.22.6.1.15
rIpRtEntry	1.3.6.1.4.1.22.6.1.6.1		not-accessible	Proprietary extensions for the rfc1156 defined ipRoutingEntry. A proprietary ipRouteEntry entry contains 10 standard objects and the proprietary object listed below. The standard objects are: ipRouteDest, ipRouteIfIndex, ipRouteMetric1, ipRouteMetric2, ipRouteMetric3, ipRouteMetric4, ipRouteNextHop, ipRouteType, ipRouteProto and ipRouteAge. To add an atEntry to the ipRoutingTable, MIB-II defines the ipRouteType as the validating item. Therefore, ipRouteType must be the last item in the message when adding an entry. All items, both proprietary and standard, except the ipRouteDest, ipRouteNextHop, ipRouteMetric1, and ipRouteType are determined by the agent. To add to the ipRouteEntry the agent requires the ipRouteDest, ipRouteNextHop, and the ipRouteMetric1 followed by the ipRouteType. The ipRouteIfIndex is determined by the agent based on the ipRouteDest. The ipRouteMetric2, ipRouteMetric3 and ipRouteMetric4 are not used by the router and are set to zero. The ipRouteProto is set to local and rRtStatic is set to static. All ipRouteEntries manually defined are considered static and are not removed by the agent until specifically requested by the manager. If the ipRouteMetric1 is not provided, it's value defaults to 1. To remove an ipRouteEntry, the ipRouteType should be set to invalid. The INDEX value specified should correspond to the destination IP address of the desired entry.
rIpRtEvEntry	1.3.6.1.4.1.22.6.1.14.1		not-accessible	The entry containing the status of a specific routing event.
rIpRtEvTable	1.3.6.1.4.1.22.6.1.14		not-accessible	Table containing the status of each routing event supported in the brouter.
rIpRtTable	1.3.6.1.4.1.22.6.1.6		not-accessible	Proprietary extensions for the rfc1156 defined ipRoutingTable.
IP rLsnAddr	1.3.6.1.4.1.22.6.1.10.1.1	IpAddress	read-write	The destination address being restricted by this command.
IP rLsnRstAddr	1.3.6.1.4.1.22.6.1.10.1.2	IpAddress	read-write	The IP address of the gateway/network being restricted.
INT rLsnRstState	1.3.6.1.4.1.22.6.1.10.1.3	INTEGER	read-write	The state of this entry. To remove an entry from the table, set this field to INACTIVE. To add an item to this table set the state to ACTIVE. However, please note that before entries be added to this list it must have a corresponding entry in the rRipLsnIndTable.
IP rMask	1.3.6.1.4.1.22.6.1.1.1.2	IpAddress	read-write	The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
IP rMaskNet	1.3.6.1.4.1.22.6.1.1.1.1	IpAddress	read-write	The IP network this mask is defined for.
INT rMaskState	1.3.6.1.4.1.22.6.1.1.1.3	INTEGER	read-write	The state of this entry. To remove an entry from the table, simply set this field to INACTIVE.
OCT rnAdjAddr	1.3.6.1.4.1.22.2.1.2.4.1.1	OCTET STRING	read-only
INT rnAdjBSize	1.3.6.1.4.1.22.2.1.2.4.1.5	INTEGER	read-only
INT rnAdjCIdx	1.3.6.1.4.1.22.2.1.2.4.1.4	INTEGER	read-only
rnAdjEnt	1.3.6.1.4.1.22.2.1.2.4.1		not-accessible
INT rnAdjLTmr	1.3.6.1.4.1.22.2.1.2.4.1.6	INTEGER	read-only
INT rnAdjPri	1.3.6.1.4.1.22.2.1.2.4.1.7	INTEGER	read-only
INT rnAdjState	1.3.6.1.4.1.22.2.1.2.4.1.2	INTEGER	read-only
rnAdjTbl	1.3.6.1.4.1.22.2.1.2.4		not-accessible
INT rnAdjType	1.3.6.1.4.1.22.2.1.2.4.1.3	INTEGER	read-only
OCT rnLvl1Addr	1.3.6.1.4.1.22.2.1.2.5.1.1	OCTET STRING	read-only
INT rnLvl1Cidx	1.3.6.1.4.1.22.2.1.2.5.1.2	INTEGER	read-only
INT rnLvl1Cost	1.3.6.1.4.1.22.2.1.2.5.1.3	INTEGER	read-only
rnLvl1Ent	1.3.6.1.4.1.22.2.1.2.5.1		not-accessible
INT rnLvl1Hops	1.3.6.1.4.1.22.2.1.2.5.1.4	INTEGER	read-only
OCT rnLvl1Next	1.3.6.1.4.1.22.2.1.2.5.1.5	OCTET STRING	read-only
rnLvl1Tbl	1.3.6.1.4.1.22.2.1.2.5		not-accessible
OCT rnNmId	1.3.6.1.4.1.22.2.1.2.1.1	OCTET STRING	read-only
OCT rnNmPaddr	1.3.6.1.4.1.22.2.1.2.1.2	OCTET STRING	read-only
rnNmParms	1.3.6.1.4.1.22.2.1.2.1
rnodes	1.3.6.1.4.1.22.2.1.2
CTR rnRcAgedPkt	1.3.6.1.4.1.22.2.1.2.3.1	Counter	read-only
CTR rnRcBadRange	1.3.6.1.4.1.22.2.1.2.3.3	Counter	read-only
CTR rnRcFormErr	1.3.6.1.4.1.22.2.1.2.3.5	Counter	read-only
CTR rnRcOversize	1.3.6.1.4.1.22.2.1.2.3.4	Counter	read-only
CTR rnRcRtUpLoss	1.3.6.1.4.1.22.2.1.2.3.6	Counter	read-only
CTR rnRcUnReach	1.3.6.1.4.1.22.2.1.2.3.2	Counter	read-only
OCT rnRpAddr	1.3.6.1.4.1.22.2.1.2.2.16	OCTET STRING	read-only
INT rnRpAMaxC	1.3.6.1.4.1.22.2.1.2.2.1	INTEGER	read-write
INT rnRpAMaxH	1.3.6.1.4.1.22.2.1.2.2.2	INTEGER	read-write
INT rnRpBRtTmr	1.3.6.1.4.1.22.2.1.2.2.3	INTEGER	read-write
INT rnRpBSize	1.3.6.1.4.1.22.2.1.2.2.4	INTEGER	read-write
INT rnRpMAddr	1.3.6.1.4.1.22.2.1.2.2.5	INTEGER	read-write
INT rnRpMArea	1.3.6.1.4.1.22.2.1.2.2.6	INTEGER	read-write
INT rnRpMaxBNR	1.3.6.1.4.1.22.2.1.2.2.7	INTEGER	read-write
INT rnRpMaxBR	1.3.6.1.4.1.22.2.1.2.2.8	INTEGER	read-write
INT rnRpMaxCir	1.3.6.1.4.1.22.2.1.2.2.9	INTEGER	read-only
INT rnRpMaxCost	1.3.6.1.4.1.22.2.1.2.2.10	INTEGER	read-write
INT rnRpMaxHops	1.3.6.1.4.1.22.2.1.2.2.11	INTEGER	read-write
INT rnRpMaxV	1.3.6.1.4.1.22.2.1.2.2.12	INTEGER	read-write
INT rnRpSegBuf	1.3.6.1.4.1.22.2.1.2.2.14	INTEGER	read-only
INT rnRpType	1.3.6.1.4.1.22.2.1.2.2.15	INTEGER	read-write
INT rnRpUseL2A	1.3.6.1.4.1.22.2.1.2.2.17	INTEGER	read-write
OCT rnRpVers	1.3.6.1.4.1.22.2.1.2.2.13	OCTET STRING	read-only
rnRtCount	1.3.6.1.4.1.22.2.1.2.3
rnRtParms	1.3.6.1.4.1.22.2.1.2.2
CTR rPArpInRep	1.3.6.1.4.1.22.6.1.17.1	Counter	read-only	The number of ARP replies recognized as a reply to a previous arp-request issued by proxy arp.
CTR rPArpInReqSrch	1.3.6.1.4.1.22.6.1.17.2	Counter	read-only	The number of ARP requests recognized as 'naive request' that were put on the Proxy Search List.
CTR rPArpNaiveReq	1.3.6.1.4.1.22.6.1.17.7	Counter	read-only	The number of ARP requests recognized as 'naive request' and to be handled by proxy arp mechanism. (A 'naive host' is a host with no subnetting knowledge.)
CTR rPArpOutActRep	1.3.6.1.4.1.22.6.1.17.5	Counter	read-only	The number of ARP replies sent by proxy arp, back to a naive host, as the result of an active proxy search.
CTR rPArpOutRep	1.3.6.1.4.1.22.6.1.17.4	Counter	read-only	The number of ARP replies sent by proxy arp, back to a naive host, as a result of passive proxy (the sought host was in the table).
CTR rPArpOutReq	1.3.6.1.4.1.22.6.1.17.3	Counter	read-only	The number of ARP request sent on behalf of another host by proxy arp.
CTR rPArpToutSrch	1.3.6.1.4.1.22.6.1.17.6	Counter	read-only	The number of entries that were timed out from proxy arp search list (these entries got no reply during the proxy life-time interval).
IP rPDest	1.3.6.1.4.1.22.5.1.3.1.2	IpAddress	read-write	The network address of the node to ping.
rPingEntry	1.3.6.1.4.1.22.5.1.3.1		not-accessible	The list of parameters required to perform a ping request
rPingTable	1.3.6.1.4.1.22.5.1.3		not-accessible	A table of requests for ping via ICMP echo. No modification of existing table entries is allowed, only addition of new entries.
INT rPProto	1.3.6.1.4.1.22.5.1.3.1.1	INTEGER	read-write	The protocol to be used for the ping request. Future versions will also support Loopback Mirror and Decnet Circuit Loopback.
INT rPReply	1.3.6.1.4.1.22.5.1.3.1.4	INTEGER	read-write	Reply to ICMP echo received by agent. NOTE: Although this object is defined as read-write, attempting to write any value results in an error.
INT rPState	1.3.6.1.4.1.22.5.1.3.1.5	INTEGER	read-write	The state of the entry. When this state is set to ACTIVE, the appropriate ping request will be issued by Brouter. A table entry with a state of INACTIVE is an invalidated entry and will not be returned to a get request.
INT rPTimeOut	1.3.6.1.4.1.22.5.1.3.1.3	INTEGER	read-write	Timeout in seconds to allow for the remote node to respond.
rRipAnncEntry	1.3.6.1.4.1.22.6.1.12.1		not-accessible	The list of fields needed to support the rRipAnncTable.
rRipAnncIndEntry	1.3.6.1.4.1.22.6.1.11.1		not-accessible	The variables needed to maintain an entry in the rRipAnncIndTable.
IP rRipAnncIndNet	1.3.6.1.4.1.22.6.1.11.1.1	IpAddress	read-write	The IP address this unit recognizes on the (sub)network being restricted.
rRipAnncIndTable	1.3.6.1.4.1.22.6.1.11		not-accessible	The rRipAnncIndTable contains the flags that indicate the type of announce restriction(s) that are active for each (sub)network supported by the unit. Please note that before any entries can be defined here or in the rRipAnncTable, the (sub)network must be defined to the router via an ipAddrEntry.
rRipAnncTable	1.3.6.1.4.1.22.6.1.12		not-accessible	Setting this table causes RIP to taylor its update announcements. This table allows the network administrator to limit RIP's scope for outbound processing. Inbound processing is not affected by this table. If the rRipAnncType is set to ANNOUNCE, RIP will adjust its outbound announcments on the indicated (sub)network by propogating announcements for those gateways listed in the rRipAnncTable only. All announcements for gateways not on the ANNOUNCE list will not be sent over the associated (sub)network. If the rRipAnncType is set to DO-NOT-ANNOUNCE, RIP will adjust its outbound announcements on the indicated (sub)network by not propogating announcements for those gateways listed in the rRipAnncTable. All other announcements will be propogated on the indicated (sub)network. If the value of ripAnncType is changed, this table is cleared. This table is maintained on a per (sub)network basis. If the table is empty, it is assumed that all gateways on all (sub)networks are ANNOUNCE. This is also the default state. To change the state of an entry from ANNOUNCE to DO-NOT-ANNOUNCE or vice versa, change the rRipAnncType in the ripAnncIndTable for the (sub)network and then define the new restriction list for the (sub)network. Please note that before any entries can be defined here or in the rRipAnncIndTable, the (sub)network must be defined to the router via an ipAddrEntry.
INT rRipAnncType	1.3.6.1.4.1.22.6.1.11.1.2	INTEGER	read-write	Indicates whether this (sub)network has an ANNOUNCE list, a DO-NOT-ANNOUNCE list or if the restriction is shut OFF. When the restriction indicator is changed, the associated ANNOUNCE/DO-NOT-ANNOUNCE list is removed.
CTR rRipInvRcv	1.3.6.1.4.1.22.6.1.15.8	Counter	read-only	Number of invalid RIP messages received.
rRipLsnEntry	1.3.6.1.4.1.22.6.1.10.1		not-accessible	The list of fields needed to support the rRipLsnTable.
IP rRipLsnIndDest	1.3.6.1.4.1.22.6.1.9.1.1	IpAddress	read-write	The restricted destination address. For the LISTEN list this address will be the address of a gateway on a locally attached (sub)network. For the DO-NOT-LISTEN list this address will be a locally attached (sub)network.
rRipLsnIndEntry	1.3.6.1.4.1.22.6.1.9.1		not-accessible	The variables needed to maintain an entry in the rRipLsnIndTable.
rRipLsnIndTable	1.3.6.1.4.1.22.6.1.9		not-accessible	The rRipLsnIndTable contains the flags that indicate the type of listen restriction that is active for a given destination address.
rRipLsnTable	1.3.6.1.4.1.22.6.1.10		not-accessible	Setting this table causes RIP to select inbound update information about a specific network or host. This table allows the network administrator to limit RIP's scope for inbound processing. Outbound processing is not affected by this table. If the rRipLsnType for this destination is set to LISTEN, RIP will use updates received from the specified gateways only. If the rRipLsnType is set to DO-NOT-LISTEN, RIP will discard updates received from the specified gateways and process all others. If the value of rRipLsnType is changed, this table is cleared. This table is maintained on a per destination basis. If the table is empty, it is assumed that all gateways are LISTEN for all destination addresses. This is also the default setting. To change the state of an entry in this table from LISTEN to DO-NOT-LISTEN or vice versa, change the rRipLsnType for the destination address and then define the new restriction list for that address.
INT rRipLsnType	1.3.6.1.4.1.22.6.1.9.1.2	INTEGER	read-write	Indicates whether the restricted list for this destination is a LISTEN list or a DO-NOT-LISTEN list. When the restriction indicator is changed, the associated LISTEN/DO-NOT-LISTEN list is removed. This field is the validation field to add/delete an entry in this table.
CTR rRipReqRcv	1.3.6.1.4.1.22.6.1.15.6	Counter	read-only	Number of received RIP requests.
CTR rRipReqXmt	1.3.6.1.4.1.22.6.1.15.7	Counter	read-only	Number of transmitted RIP requests.
rRipSrcEntry	1.3.6.1.4.1.22.6.1.13.1		not-accessible	The list of fields needed to support the rRipSrcTable.
rRipSrcTable	1.3.6.1.4.1.22.6.1.13		not-accessible	Setting this table causes RIP broadcasting to be shut off by indicating which gateways should receive directed RIP information. No broadcast RIP update massages will be sent on the specified network. This table allows the network administrator to limit RIP's scope for outbound processing. Inbound processing is not affected by this table. As stated above, this table is maintained on a per (sub)network basis. If the table is empty, it is assumed that all gateways are to receive updates, i.e. broadcast is turned on. The default is broadcast all updates on all (sub)networks. Please note that before any entries can be defined here, the (sub)network must be defined to the router via an ipAddrEntry.
CTR rRipTotFnd	1.3.6.1.4.1.22.6.1.15.2	Counter	read-only	Number of times when routing destination was found.
CTR rRipTotRef	1.3.6.1.4.1.22.6.1.15.1	Counter	read-only	Total number of RIP lookups.
INT rRipTrInd	1.3.6.1.4.1.22.6.1.7	INTEGER	read-write	This flag indicates whether the rRipTrustTable is used to list trusted or not-trusted gateways. When the state is changed, all existing entries in the table are cleared. The default value is OFF. Setting this object to OFF causes the trust list to be removed and the router is returned to the default state of TRUST ALL.
rRipTrustEntry	1.3.6.1.4.1.22.6.1.8.1		not-accessible	The list of fields needed to support the rRipTrustTable.
rRipTrustTable	1.3.6.1.4.1.22.6.1.8		not-accessible	This table has 2 possible meanings depending on the value of rRipTrInd. These 2 configuration options allow the network administrator to limit RIP's scope for inbound processing. Outbound processing in not affected by this table. If rRipTrInd is set to TRUSTED, RIP listens only to the indicated gateways and no others. If rRipTrInd is set to NOT-TRUSTED, RIP does not listen to the indicated gateways but will accept updates from all other gateways. If the value of rRipTrInd is changed, this table is cleared. If the table is empty, it is assumed that all gateways are to be trusted or not-trusted depending on the value of rRipTrInd. The default for initialization is all gateways are trusted.
CTR rRipUdpRcv	1.3.6.1.4.1.22.6.1.15.3	Counter	read-only	Number of received RIP responses.
CTR rRipUdpTrig	1.3.6.1.4.1.22.6.1.15.5	Counter	read-only	Total number of triggered RIP updates.
CTR rRipUdpXmt	1.3.6.1.4.1.22.6.1.15.4	Counter	read-only	Number of transmitted RIP responses.
INT rRtEvCode	1.3.6.1.4.1.22.6.1.14.1.2	INTEGER	read-only	The event id assigned to the specific routing event.
INT rRtEvStatus	1.3.6.1.4.1.22.6.1.14.1.3	INTEGER	read-write	Status of this routing event.
INT rRtEvTskId	1.3.6.1.4.1.22.6.1.14.1.1	INTEGER	read-only	The task id of the reporting entity.
INT rRtStatic	1.3.6.1.4.1.22.6.1.6.1.1	INTEGER	read-only	Defines an entry as static or dynamic. A static entry is one that has been entered manually by the network administrator and can be changed only by the network administrator. The routing protocols never overwrite a static entry. A dynamic entry is one created by the routing protocols and is updated by them as per standard definitions.
IP rSrcAddr	1.3.6.1.4.1.22.6.1.13.1.1	IpAddress	read-write	The IP address this unit recognizes on the (sub)network being restricted.
IP rSrcRstGw	1.3.6.1.4.1.22.6.1.13.1.2	IpAddress	read-write	The IP address of the gateway being restricted.
INT rSrcRstState	1.3.6.1.4.1.22.6.1.13.1.3	INTEGER	read-write	The state of this entry. To remove an entry from the table, simply set this field to INACTIVE.
OCT rTod	1.3.6.1.4.1.22.5.1.1	OCTET STRING	read-write	This is a 15 byte string containing the Greenwich Mean Time formatted as: YYMMDDHHMMSSUUU, where: YY = year DD = day HH = hours MM = minutes SS = seconds UUU = microseconds
IP rTrapAddrAddr	1.3.6.1.4.1.22.3.1.1.1.1	IpAddress	read-write	The IP address of the network management entity to which traps (of the type specified in this table entry) should be sent.
OCT rTrapAddrComm	1.3.6.1.4.1.22.3.1.1.1.2	OCTET STRING	read-write	Community string to be used in SNMP message generated to the receiving SNMP protocol entity.
rTrapAddrEntry	1.3.6.1.4.1.22.3.1.1.1		not-accessible	This object contains runtime information about an individual trap destination.
INT rTrapAddrState	1.3.6.1.4.1.22.3.1.1.1.5	INTEGER	read-write	The state of this entry in the trap address table. Setting this object to INACTIVE removes the corresponding entry from the table.
rTrapAddrTbl	1.3.6.1.4.1.22.3.1.1		not-accessible	This table contains runtime information about destinations to which traps should be directed. Setting the rTrapAddrState to INACTIVE removes an entry from the table.
OCT rTrapAddrType	1.3.6.1.4.1.22.3.1.1.1.4	OCTET STRING	read-write	A bit-encoded string, 1 byte in length, which contains information about which trap(s) should be directed to the management entity described by this table entry. The following list identifies the trap types and corresponding bit values. TRAP-STANDARD-MIB 1000 0000 TRAP-DIAG 0100 0000 TRAP-GNRL-PROPRIETARY 0010 0000 TRAP-ROUT 0001 0000 TRAP-DEBUG 0000 1000 TRAP-PROP-DEC4 0000 0100
INT rTrapAddrVer	1.3.6.1.4.1.22.3.1.1.1.3	INTEGER	read-write	The trap address table version number. The current (and only valid) version number is 1.
IP rTrRestGw	1.3.6.1.4.1.22.6.1.8.1.1	IpAddress	read-write	The IP address of the gateway being restricted.
INT rTrRestState	1.3.6.1.4.1.22.6.1.8.1.2	INTEGER	read-write	The state of this entry. To add an entry to the list, set this field to ACTIVE. To remove an entry from the table, simply set this field to INACTIVE.
INT rUBrSw	1.3.6.1.4.1.22.5.1.12	INTEGER	read-write	Indicates the state of the bridging feature. If this switch is turned OFF, no traffic will be bridged through this unit. All traffic will be required to be sent through one of the active routing functions.
INT rUDecSw	1.3.6.1.4.1.22.5.1.11	INTEGER	read-write	Indicates the state of the Decnet feature. If this switch is turned OFF, no Decnet traffic will be routed through this unit. If bridging is activated, the Decnet trafic will be bridged.
INT rUDnld	1.3.6.1.4.1.22.5.1.7	INTEGER	read-write	Setting this object to 1 has the side effect of causing the unit to perform a cold reset. Reading this object has no meaning. The value 1 is returned in response to a get or get-next request.
INT rUDnldAllowed	1.3.6.1.4.1.22.5.1.15	INTEGER	read-write	Indicates whether downloading to the brouter's Flash memory will be permitted. If this flag is set to OFF the agent will refuse to download into its flash memory. At system start-up this parameter will be initialized to OFF. Once this has been set to ON, it will remain ON until either the user sets it to OFF or a download has been performed at which time the agent will set it to OFF.
INT rUInitFlash	1.3.6.1.4.1.22.5.1.16	INTEGER	read-write	Indicates if the flash bank states are being initialized. If this object is set to TRUE, the side effect will be to cause the flash states to be initialized. If the flash is in the process of being initialized, a get or getnext operation performed on this object will return 1 (TRUE), otherwise it will return 2 (FALSE).
INT rUIpCfg	1.3.6.1.4.1.22.5.1.13	INTEGER	read-write	Indicates the state of IP routing based on its (sub)net configuration. RT-CFG-HOST-ONLY indicates that there is only one IP address in the unit. All IP packets received while in this state will be bridged as an unknown protocol.
INT rUIpSw	1.3.6.1.4.1.22.5.1.10	INTEGER	read-write	Indicates the state of the IP routing feature. If this switch is turned OFF, IP traffic will not be routed through the brouter. IP messages destined for the brouter will be delivered to the unit's upper layers. This leaves the SNMP agent accessible to its manager even when IP routing is de-activated. If bridging is activated, the IP traffic will be bridged.
INT rURset	1.3.6.1.4.1.22.5.1.8	INTEGER	read-write	Setting this object to 1 has the side effect of causing the unit to perform a warm reset. Reading this object has no meaning. The value 1 is returned in response to a get or get-next request.
OCT rURunningVersion	1.3.6.1.4.1.22.5.1.14	OCTET STRING	read-only	Indicates the running version.
spartacus	1.3.6.1.4.1.22
INT sysPermBridgeAvailable	1.3.6.1.4.1.22.5.2.13	INTEGER	read-only	Indicates whether the unit supports bridging functionality or not.
INT sysPermDecAvailable	1.3.6.1.4.1.22.5.2.15	INTEGER	read-only	Indicates whether the unit supports DECnet functionality or not.
INT sysPermIpAvailable	1.3.6.1.4.1.22.5.2.14	INTEGER	read-only	Indicates whether the unit supports IP functionality or not. IP host functionality is always present.
trap	1.3.6.1.4.1.22.3
traperm	1.3.6.1.4.1.22.3.2
traprun	1.3.6.1.4.1.22.3.1

RFC description

Proprietary MIB for the Fibronics FX8210-B network device. Includes objects for monitoring FDDI port status, IP routing configuration, ARP cache management, and various network protocol statistics.

Start monitoring Fibronics FX8210-B switch (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FIBRONICS-PROPRIETARY-FX8210-B-MIB

What Is FIBRONICS-PROPRIETARY-FX8210-B-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description