FIBRONICS-PROPRIETARY-FX8210-B-MIB :: rUBrSw

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › FIBRONICS-PROPRIETARY-FX8210-B-MIB › rUBrSw

rUBrSw

Module: FIBRONICS-PROPRIETARY-FX8210-B-MIB

OID (symbolic): FIBRONICS-PROPRIETARY-FX8210-B-MIB::rUBrSw

OID (numeric): 1.3.6.1.4.1.22.5.1.12

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Indicates the state of the bridging feature. If this switch is turned OFF, no traffic will be bridged through this unit. All traffic will be required to be sent through one of the active routing functions.

What is rUBrSw?

Turns Layer 2 bridging on or off for the whole unit. When off, all traffic must instead go through one of the unit's active routing functions (IP or DECnet) rather than being bridged transparently.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.5.1.12
snmpwalk -v2c -c public <target> FIBRONICS-PROPRIETARY-FX8210-B-MIB::rUBrSw

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.22.5.1.12.1
snmpget -v2c -c public <target> FIBRONICS-PROPRIETARY-FX8210-B-MIB::rUBrSw.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.22.5.1.12.1 i <value>

Start monitoring Fibronics FX8210-B switch (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FIBRONICS-PROPRIETARY-FX8210-B-MIB::rUBrSw OID value, configure state conditions and alerts, and monitor any Fibronics FX8210-B switch (legacy) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.22spartacusCMU-MIB
Numeric OIDNameModule
1.3.6.1.4.1.22.5propSysFIBRONICS-PROPRIETARY-FX8210-B-MIB
1.3.6.1.4.1.22.5.1propSysRunFIBRONICS-PROPRIETARY-FX8210-B-MIB
1.3.6.1.4.1.22.5.1.12rUBrSwFIBRONICS-PROPRIETARY-FX8210-B-MIB