All MIBs › FMX1830
Category: Domain: Optical Transport, Domain: Telco/Transport, Technology: Optical Transport
Description: Nokia (formerly NSN) 1830 FMX optical transport MIB for managing the 1830 Photonic Service Switch/FMX optical network elements.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is FMX1830?
FMX1830 is a legacy vendor-private MIB authored by Fibronics for its terminal-server linecard product of the same name, defined under the fibronics enterprise branch (fmxbd/devices/terminal-server). Despite the name suggesting a modern optical transport platform, the actual module models an async terminal server: port configuration and session state in vPortTable (vPortState, vPortActiveSessions, vPortSecurityEnable, vPortGroups), service definitions in vSvcTable (vSvcTelEnable/vSvcLtEnable/vSvcRawEnable, vSvcIpAddr, vSvcTcpPort), user/security profiles in vProfTable and vSecTable, host/name-service tables (vHostTable, vNsTable), TACACS configuration (vTacTable), active protocol sessions (vTelSessTable for Telnet, vRlogSessTable for rlogin, vLtSessTable for LAT), output queues (vQueTable), and SNMP trap destination configuration (vSnmpTrapDestTable). This data is useful for tracking how many terminal sessions are active per port/service and whether trap destinations and TACACS-based security are correctly configured on the device. It has no dependency on other MIBs beyond RFC1155-SMI/RFC1213-MIB textual conventions, and it is deployed on standalone Fibronics FMX1830 terminal-server hardware -- engineers looking up the FMX1830 MIB should note it documents this older terminal-server line rather than any optical transport product that happens to share the same model number.
IPNetwork Monitor allows you to monitor SNMP objects defined in FMX1830. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Fibronics FMX1830 terminal server / linecard (legacy async terminal-server hardware, distinct from later Nokia 1830 optical transport products despite the shared model number)
Monitoring Examples
An operator polls vPortActiveSessions and vPortState in vPortTable to see how many Telnet/rlogin/LAT sessions are active on a given port, and checks vTelSessTable for stalled entries; a port stuck at its vPortSessionLimit for vPortActiveSessions would indicate the port is exhausted and unable to accept new terminal sessions.
What Can Be Monitored
- per-port terminal session state and counts
- active Telnet/rlogin/LAT session tables
- service (Telnet/LAT/raw) enablement per port
- user/security profile and TACACS configuration
- output queue tables
- SNMP trap destination configuration
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| IpAddress | |
| TimeTicks | |
| enterprises |
From RFC1213-MIB
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| fibronics | 1.3.6.1.4.1.22 | |||
| fmxbd | 1.3.6.1.4.1.22.65 | |||
| devices | 1.3.6.1.4.1.22.65.1 | |||
| terminal_server | 1.3.6.1.4.1.22.65.1.2 | |||
| port | 1.3.6.1.4.1.22.65.1.2.1 | |||
| server | 1.3.6.1.4.1.22.65.1.2.2 | |||
| service | 1.3.6.1.4.1.22.65.1.2.3 | |||
| slot | 1.3.6.1.4.1.22.65.1.2.4 | |||
| serverAdmin | 1.3.6.1.4.1.22.65.1.2.5 | |||
| serverDevice | 1.3.6.1.4.1.22.65.1.2.5.1 | |||
| fmxServerDevice | 1.3.6.1.4.1.22.65.1.2.5.1.1 | |||
| serverProtocol | 1.3.6.1.4.1.22.65.1.2.5.2 | |||
| protNone | 1.3.6.1.4.1.22.65.1.2.5.2.1 | |||
| protTelnet | 1.3.6.1.4.1.22.65.1.2.5.2.2 | |||
| protRlogin | 1.3.6.1.4.1.22.65.1.2.5.2.3 | |||
| protLt | 1.3.6.1.4.1.22.65.1.2.5.2.4 | |||
| serverMibs | 1.3.6.1.4.1.22.65.1.2.6 | |||
| fmxServerMib | 1.3.6.1.4.1.22.65.1.2.6.1 | |||
| fmxSystem | 1.3.6.1.4.1.22.65.1.2.6.1.1 | |||
| OID vSysIdentifier | 1.3.6.1.4.1.22.65.1.2.6.1.1.1 | OBJECT IDENTIFIER | read-only | A unique identifier of the server type. The OID is one of those found under { serverDevice }, such as { fmxServerDevice }. |
| INT vSysReboot | 1.3.6.1.4.1.22.65.1.2.6.1.1.2 | INTEGER | read-write | A control to reinitialize the server. In response to a get-request or get-next-request, the agent always returns 'ready(1)' as the value. Setting the value to 'execute(2)' causes the server to reboot. |
| INT vSysLtGroupStatus | 1.3.6.1.4.1.22.65.1.2.6.1.1.3 | INTEGER | read-only | An integer indicating whether the fmxLt group is implemented on this particular unit. That entire group has a status of optional, as some software configurations executing in a server unit may not implement the group. For example, the group is not implemented in a unit which is configured without the Lat-compatible protocol, and in this case the value of vSysLtGroupStatus is absent(2). This variable gives management stations an easy way to determine whether the group is implemented in the particular unit being managed. |
| INT vSysPrimaryBoot | 1.3.6.1.4.1.22.65.1.2.6.1.1.4 | INTEGER | read-write | The primary boot method of the server. This boot method is attempted first on system re-initialization. |
| INT vSysSecondaryBoot | 1.3.6.1.4.1.22.65.1.2.6.1.1.5 | INTEGER | read-write | The secondary boot method of the server. This boot method is attempted on system re-initialization when the primary boot method fails. |
| STR vSysBootFilePath | 1.3.6.1.4.1.22.65.1.2.6.1.1.6 | DisplayString | read-write | The pathname on the remote boot host of the server's boot file for boot through TFTP. |
| STR vSysBootFileName | 1.3.6.1.4.1.22.65.1.2.6.1.1.7 | DisplayString | read-write | The filename of the server's boot file for boot through MOP, TFTP, or Card. |
| IP vSysBootServer | 1.3.6.1.4.1.22.65.1.2.6.1.1.8 | IpAddress | read-write | The IP address of the boot server for boot through TFTP or BOOTP. A value of '0.0.0.0' (on read or write) indicates that no boot server is defined. |
| INT vSysRemoteBoot | 1.3.6.1.4.1.22.65.1.2.6.1.1.9 | INTEGER | read-write | Indicates whether this server will supply system software as a boot image for remote servers when they request a network boot. |
| INT vSysEtherType | 1.3.6.1.4.1.22.65.1.2.6.1.1.10 | INTEGER | read-write | Selects the operating ethernet interface. 'autoSelect(1)' indicates that the server will automatically select an interface by identifying that interface showing network activity. Note that the server must be rebooted before a change in the value of this variable actually takes effect. |
| INT vSysBroadband | 1.3.6.1.4.1.22.65.1.2.6.1.1.11 | INTEGER | read-write | Determines whether or not the server is configured to interface with with broadband network tranceivers. Note that the server must be rebooted before a change in the value of this variable actually takes effect. |
| INT vSysPasswordLimit | 1.3.6.1.4.1.22.65.1.2.6.1.1.12 | INTEGER | read-write | Determines the number of times the server will allow a user to mistype a local password, either to login to a port or connect to a local service, before refusing the login attempt. The value 0 indicates infinite password attempts. |
| STR vSysPrivPassword | 1.3.6.1.4.1.22.65.1.2.6.1.1.13 | DisplayString | read-write | The password required for users to enter privileged mode, and have access to privileged commands. Note that on a set-request, the new value is automatically converted to upper-case, as is the user password input. |
| OCT vSysMaintenancePassword | 1.3.6.1.4.1.22.65.1.2.6.1.1.14 | OCTET STRING | read-write | The password required for access to the server remote console port through the MOP network protocol. |
| fmxPort | 1.3.6.1.4.1.22.65.1.2.6.1.2 | |||
| INT vPortBroadcast | 1.3.6.1.4.1.22.65.1.2.6.1.2.1 | INTEGER | read-write | Determines whether or not port users may broadcast text directly to other ports, using the local 'BROADCAST' command. |
| INT vPortInactivityTimer | 1.3.6.1.4.1.22.65.1.2.6.1.2.2 | INTEGER | read-write | The number of minutes that may pass with no port activity before that port is automatically logged out, if the port's inactivity logout feature is enabled. |
| INT vPortAbsoluteTimer | 1.3.6.1.4.1.22.65.1.2.6.1.2.3 | INTEGER | read-write | The number of minutes that may pass with no port activity before that port is automatically logged out, if the port's absolute logout feature is enabled. |
| INT vPortLock | 1.3.6.1.4.1.22.65.1.2.6.1.2.4 | INTEGER | read-write | Determines whether or not the server will allow a user to lock a port using the local 'LOCK' command. |
| STR vPortLoginPassword | 1.3.6.1.4.1.22.65.1.2.6.1.2.5 | DisplayString | read-write | The password required for users to login ports with vPortPasswordEnable = 'enabled(1)'. On a set-request the agent converts lower case ASCII characters to upper case for this object, because the user's password input is also converted before comparison. |
| INT vPortConsoleIndex | 1.3.6.1.4.1.22.65.1.2.6.1.2.6 | INTEGER | read-write | The value of vPortIndex for the port which is serving as the local console port. Abnormal event messages are automatically directed to the local console port. A value of 0 indicates that console messages are disabled. |
| INT vPortFailover | 1.3.6.1.4.1.22.65.1.2.6.1.2.7 | INTEGER | read-write | Determines whether or not the port failover feature is enabled. |
| INT vPortSignalCheck | 1.3.6.1.4.1.22.65.1.2.6.1.2.8 | INTEGER | read-write | Determines whether or not the port signal check feature can be enabled for individual ports. |
| INT vPortLoginMsgEnable | 1.3.6.1.4.1.22.65.1.2.6.1.2.9 | INTEGER | read-write | Determines whether or not the server prints an introductory login message to the user when the user completes a login to a port. |
| INT vPortBreakDuration | 1.3.6.1.4.1.22.65.1.2.6.1.2.10 | INTEGER | read-write | Determines the length, in milliseconds, of a BREAK when transmitted from a physical port. |
| INT vPortXoffMark | 1.3.6.1.4.1.22.65.1.2.6.1.2.11 | INTEGER | read-write | Determines the number of free bytes in a port input buffer at which point the port will XOFF the attached device. When set, the new value will not take effect until the server is re-initialized. |
| INT vPortXonMark | 1.3.6.1.4.1.22.65.1.2.6.1.2.12 | INTEGER | read-write | Determines the number of used bytes in a port input buffer at which point the port will XON the attached device. When set, the new value will not take effect until the server is re-initialized. |
| INT vPortNumber | 1.3.6.1.4.1.22.65.1.2.6.1.2.13 | INTEGER | read-only | An integer indicating the number of entries in vPortTable. This value cannot change from one re-initialization of the unit to the next re-initialization. |
| vPortTable | 1.3.6.1.4.1.22.65.1.2.6.1.2.14 | not-accessible | A list of port entries. The number of entries is given by the value of vPortNumber. | |
| vPortEntry | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1 | not-accessible | Status and parameter values for a port. | |
| INT vPortIndex | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.1 | INTEGER | read-only | A unique value for each port. Its value ranges between 1 and the value of vPortNumber. The value for each port will remain constant at least from one re-initialization of the unit's network management system to the next re-initialization. |
| INT vPortType | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.2 | INTEGER | read-only | An integer indicating the type of the port. Virtual ports should be considered communication channels to their particular interface. For example, a virtualX25(7) port is a channel to an X.25 interface for establishing connections to/from that interface. |
| STR vPortName | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.3 | DisplayString | read-write | A textual name for the port. This name is used in LAT-compatible session start requests, where a device can request to be connected to a port with a given name. On a set-request the agent converts lower case ASCII characters to upper case for this object. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| STR vPortUserName | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.4 | DisplayString | read-only | The textual username typed in by the user who logged into the port. |
| INT vPortState | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.5 | INTEGER | read-only | The current operational state of the port. 'idle(2)' indicates that the port has no sessions and is logged out. 'local(3)' indicates that the port is currently in local server mode, although suspended sessions may exist on the port. 'connecting(4)' indicates that the server is attempting to connect the port to a session. 'connected(5) indicates that the port is currently connected to a protocol session. 'locked(6)' indicates that the port has been locked by a local LOCK command and is awaiting the unlock password. 'serial-interface(7)' indicates that the port is acting as an interface for a serial link controlled by SLIP, PPP, etc. |
| INT vPortLogout | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.6 | INTEGER | read-write | A control to logout a port. In response to a get-request or get-next-request, the agent always returns 'ready(1)' as the value. Setting the value to 'execute(2)' causes all sessions on the port to be disconnected and the port is returned to idle state. |
| INT vPortActiveSessions | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.7 | INTEGER | read-only | The number of presently active sessions on the port, whether current or suspended. |
| INT vPortCurrSessNumber | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.8 | INTEGER | read-only | The reference number of the port's current session. There is a unique non-zero reference number for each session on a port. The reference number stays constant for the life of the session. It can be used in conjunction with vPortIndex to index into the appropriate session table for retrieval of session information (vTelSessTable, vLtSessTable, or vRlogSessTable). If there are no sessions on the port, or if none of them is current, this object will have the value 0. |
| OID vPortCurrSessProt | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.9 | OBJECT IDENTIFIER | read-only | An identifier of which higher-level protocol the current port session is running over. The possibilities are { protNone } (for no current session, or unknown), { protTelnet }, { protRlogin }, or { protLt }. |
| INT vPortAccess | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.10 | INTEGER | read-write | An indication of the allowed types of access to the port. 'local(1)' indicates that the port can only carry sessions initiated by it. 'remote(2)' indicates that the port can only accept connections initiated by another entity. 'dynamic(3)' indicates that the port can both initiate sessions and accept connections initiated by another entity. 'none(4)' indicates that the port can not pass any characters, and can neither initiate nor accept connections. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortVirtualEnable | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.11 | INTEGER | read-write | An indication of the current setting of the port's virtual characteristic. This parameter affects the port's actions when connections are established. Refer to the user manual for a complete description of this parameter. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| OCT vPortVirtualString | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.12 | OCTET STRING | read-write | An indication of the current setting of the port's virtual text string. This parameter affects the port's actions when connections are established. Refer to the user manual for a complete description of this parameter. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortSessionLimit | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.13 | INTEGER | read-write | The maximum number of simultaneous sessions allowed on the port. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| STR vPortProfile | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.14 | DisplayString | read-write | The name of the profile in use for the port. The profile contains session parameter information for Telnet and Rlogin. When the port initiates a Telnet or Rlogin session, the parameters to be used for that session are taken from the port's profile. vPortProfilename can be used to index into the profile table and retrieve/modify the relevant parameters. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortQueueing | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.15 | INTEGER | read-write | An indication of whether the LAT-compatible protocol will request session queueing when attempting to establish a session initiated at this port. If queueing is requested, a remote node will queue the connection request in the case of resource failures and accept the session when it is able. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortPasswordEnable | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.16 | INTEGER | read-write | An indication of whether the system password must be entered to login to the port. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortTacacsEnable | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.17 | INTEGER | read-write | An indication of whether the username and password entered at login must be verified by a Tacacs server before port access is permitted. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortSecurityEnable | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.18 | INTEGER | read-write | An indication of whether the port security feature is enabled. Ports for which security is enabled are allowed to execute only a limited subset of the available local commands. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| LTG vPortGroups | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.19 | LtGroupList | read-write | Indicates which LAT-compatible groups are authorized and currently enabled on the port. There are 256 possible LAT-compatible groups (0-255). Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortBreakMode | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.20 | INTEGER | read-write | An indication of how a BREAK is interpreted when received at the port as input. 'local(1)' indicates that a received BREAK causes any current session to be suspended and the port returned to local mode. If there is no current session, the BREAK causes any port output in progress to be aborted. 'remote(2)' indicates that a received BREAK is passed through the current session to the other side via a protocol-specific mechanism. If there is no current session, the BREAK causes any port output in progress to be aborted. 'disabled(3)' indicates that all received BREAKs are ignored. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| CHA vPortBackSwitch | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.21 | Character | read-write | A 'hot' key which, when received at the port's input, causes the current session to be changed to the immediately preceding session (from session 3 to session 2, for example). A value of 0 means that no backwards switch is in effect. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| CHA vPortForwSwitch | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.22 | Character | read-write | A 'hot' key which, when received at the port's input, causes the current session to be changed to the next numerical session (from session 3 to session 4, for example). A value of 0 means that no forwards switch is in effect. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| CHA vPortLocalSwitch | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.23 | Character | read-write | A 'hot' key which, when received at the port's input, forces the port to suspend any current session and return to local mode. If no current session exists, any port output currently in progress is aborted. A value of 0 means that no local switch is in effect. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| STR vPortPrefSvc | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.24 | DisplayString | read-write | A string defining the port's preferred service. A user at the port does not need to specify the service name (or node address) to connect to the service, he simply executes the connect command. Alternately, the port may connect to this service immediately upon being logged in from an idle state. The exact mode of operation depends on the setting of vPortPrefMode. A zero-length value for this object means that no preferred service is in effect. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| STR vPortPrefNode | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.25 | DisplayString | read-write | A string defining the node name for the port's preferred service. Multiple LAT-compatible nodes may offer the same service name. This object defines which node is the preferred choice for the port. A zero-length value for this object means that no preferred node is in effect. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| STR vPortPrefPort | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.26 | DisplayString | read-write | A string defining the port name for the port's preferred service. For LAT-compatible services this string identifies the LAT-compatible port name of the desired destination. For IP hosts this string defines the desired TCP port number. A zero-length value means that no preferred port is in effect. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortPrefMode | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.27 | INTEGER | read-write | An indication of the mode of preferred service connection. 'preferred(2)' indicates the 'preferred' mode of connection. In this mode users may break back to local mode by means of the BREAK key or a defined local switch. 'dedicated(3)' indicates that the port cannot function in local mode at all. It is dedicated to the specified service. Once the service connection is broken, the port is logged out. When the port is logged in, it immediately connects to the dedicated service. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortAutoConnect | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.28 | INTEGER | read-write | A port characteristic which, when enabled, causes the port to automatically attempt to re-establish any connection which is abnormally terminated, such as by network media failure. If a preferred service is also defined, the port will automatically attempt connection to the preferred service upon login. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| STR vPortPrompt | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.29 | DisplayString | read-write | The prompt string for the port when it is in local mode. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortInactiveLogout | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.30 | INTEGER | read-write | A port characteristic which, when enabled, causes the port to automatically become logged out if it has no active sessions and no data has been received or transmitted at the port for the duration of the vSysInactivityTimer. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortAutoPrompt | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.31 | INTEGER | read-write | A port characteristic which, when enabled, causes the LAT-compatible service prompt to appear at the port immediately upon connecting to a LAT-compatible service. Many LAT-compatible services do not supply a prompt until a carriage return is encountered. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortBroadcastEnable | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.32 | INTEGER | read-write | A port characteristic which, when enabled, allows characters broadcast from other server ports to appear at the port. If disabled, such broadcasts are not permitted to the particular port. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortInterrupts | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.33 | INTEGER | read-write | A port characteristic which, when enabled, allows a remote connection to the port to be interrupted by a local user by means of the BREAK key. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortMessageCodes | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.34 | INTEGER | read-write | A port characteristic which, when enabled, causes a message code reference number to be generated along with any port status or error messages. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortVerification | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.35 | INTEGER | read-write | A port characteristic which, when enabled, causes a status message to appear on each connection attempt by the port. The status message indicates success or failure of the connection and provides the session number of the newly established session. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortDialup | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.36 | INTEGER | read-write | A port characteristic which, when enabled, causes the server to identify that the port is configured for modem dial-in service when it connects to a LAT-compatible service. This may cause the service to initiate any security features it chooses to verify the authority or source of the connecting user. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortRemoteModify | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.37 | INTEGER | read-write | A port characteristic which, when enabled, causes the server to allow modification of local port parameters (speed, character size, parity, etc.) from the remote end of the connection through protocol-specific means. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortAbsoluteLogout | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.38 | INTEGER | read-write | A port characteristic which, when enabled, causes the port to automatically become logged out if no data has been received or transmitted at the port for the duration of the vSysAbsoluteTimer, regardless of the presence of suspended sessions on the port. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortIOflush | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.39 | INTEGER | read-write | A port characteristic which, when enabled, causes the server to automatically flush the port's output buffer when the port becomes logged out. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortLogoutMsgEnable | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.40 | INTEGER | read-write | A port characteristic which, when enabled, causes the port to print a message whenever it becomes logged out. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortScreenType | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.41 | INTEGER | read-write | A port characteristic which determines the type of output device connected to the port, and therefore determines the output data formatting used for server configuration and statistics screens. 'ansi(1)' indicates that ANSI-compatible screen formatting sequences may be used. 'softcopy(2)' specifies that VT-100 screen formatting sequences may be used. 'hardcopy(3)' indicates that no screen-formatting sequences may be used. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports. |
| INT vPortFlowType | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.42 | INTEGER | read-write | The port's type of flow control. 'none(1)' indicates that no flow control is in effect. 'xonXoff(2)' indicates software flow control by recognizing XON and XOFF characters. 'hardware(3)' indicates flow control delegated to the lower level, for example a parallel port. 'ctsRts(4)' and 'dsrDtr(5)' are specific to ports with vPortType = 'physicalRS-232(2) or 'physicalRS-423(3)'. |
| INT vPortInFlowState | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.43 | INTEGER | read-only | The current operational state of input flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level does not know. 'stop' indicates flow not allowed. 'go' indicates flow allowed. |
| INT vPortOutFlowState | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.44 | INTEGER | read-only | The current operational state of output flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level does not know. 'stop' indicates flow not allowed. 'go' indicates flow allowed. |
| INT vPortCTSstate | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.45 | INTEGER | read-only | The current state of the port's CLEAR-TO-SEND input. 'none(1)' indicates that the port has no CTS input. 'unknown(4)' indicates that the state of the input signal is unavailable to this software level. |
| INT vPortDSRstate | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.46 | INTEGER | read-only | The current state of the port's DATA-SET-READY input. 'none(1)' indicates that the port has no DSR input. 'unknown(4)' indicates that the state of the input signal is unavailable to this software level. |
| INT vPortDCDstate | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.47 | INTEGER | read-only | The current state of the port's DATA-CARRIER-DETECT input. 'none(1)' indicates that the port has no DCD input. 'unknown(4)' indicates that the state of the input signal is unavailable to this software level. |
| INT vPortDTRstate | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.48 | INTEGER | read-only | The current state of the port's DATA-TERMINAL-READY output. 'none(1)' indicates that the port has no DTR output. 'unknown(4)' indicates that the state of the output signal is unavailable to this software level. |
| INT vPortRIstate | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.49 | INTEGER | read-only | The current state of the port's RING-INDICATOR input. 'none(1)' indicates that the port has no RI input. 'unknown(4)' indicates that the state of the input signal is unavailable to this software level. |
| INT vPortRTSstate | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.50 | INTEGER | read-only | The current state of the port's REQUEST-TO-SEND output. 'none(1)' indicates that the port has no RTS output. 'unknown(4)' indicates that the state of the output signal is unavailable to this software level. |
| INT vPortSpeed | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.51 | INTEGER | read-write | The serial baud rate of the port. 'none(1)' indicates that the port is not a physical serial port. The agent will accept any valid value on a set-request for such ports. |
| INT vPortCharSize | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.52 | INTEGER | read-write | The size of serial characters transmitted/received at the port, excluding parity and stop bits. 'none(1)' indicates that the port is not a physical serial port. The agent will accept any valid value on a set-request for such ports. |
| INT vPortParityType | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.53 | INTEGER | read-write | The type of parity used for serial transmission and reception of characters at the port. 'not-applicable(1)' indicates that the port is not a physical serial port. The agent will accept any valid value on a set-request for such ports. |
| INT vPortAutobaud | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.54 | INTEGER | read-write | Indicates whether the port will automatically attempt to autobaud to an external serial device after being logged out. 'not-applicable(3)' indicates that the port is not a physical serial port. The agent will accept any valid value on a set-request for such ports. |
| INT vPortModemControl | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.55 | INTEGER | read-write | Indicates whether the port modem control characteristic is enabled. When enabled, a physical serial port will not function unless modem signals are asserted, and the port's DTR output is dropped for 5 seconds each time the port gets logged out. 'not-applicable(3)' indicates that the port is not a physical serial port. The agent will accept any valid value on a set-request for such ports. |
| INT vPortDSRlogout | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.56 | INTEGER | read-write | Indicates whether the port DSRlogout characteristic is enabled. When enabled, a physical serial port will automatically be logged out when the DSR input is dropped. 'not-applicable(3)' indicates that the port is not a physical serial port. The agent will accept any valid value on a set-request for such ports. |
| INT vPortRing | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.57 | INTEGER | read-write | Indicates whether the port ring characteristic is enabled. When enabled, a physical serial port will raise and lower its RTS output and wait for the DSR input to be raised before accepting a remote connection request. 'not-applicable(3)' indicates that the port is not a physical serial port. The agent will accept any valid value on a set-request for such ports. |
| INT vPortDTRwait | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.58 | INTEGER | read-write | Indicates whether the port DTRwait characteristic is enabled. When enabled, a physical serial port will delay asserting its DTR and RTS outputs until the RI input signal is asserted. 'not-applicable(3)' indicates that the port is not a physical serial port. The agent will accept any valid value on a set-request for such ports. |
| INT vPortSignalCheckEnable | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.59 | INTEGER | read-write | Indicates whether the port signal check characteristic is enabled. When enabled, a physical serial port will check for the assertion of the DSR input signal before accepting a remote connection request. 'not-applicable(3)' indicates that the port is not a physical serial port. The agent will accept any valid value on a set-request for such ports. |
| INT vPortHandshake | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.60 | INTEGER | read-write | On some server units the physical serial ports have connectors which do not allow both the CTS and RI input signals. This object indicates how the input signal is to be interpreted. 'not-applicable(3)' indicates that the port is not a physical serial port, or that the serial port can accept both the CTS and RI input signals. The agent will accept any valid value on a set-request for such ports. |
| CTR vPortRcvChars | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.61 | Counter | read-only | Total number of characters detected as input from the port since system re-initialization, including locally-processed input, and input sent to all sessions. |
| CTR vPortTrnChars | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.62 | Counter | read-only | Total number of characters detected as output from the port since system re-initialization, including locally-creating output, and output received from all sessions. |
| CTR vPortFrameErrs | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.63 | Counter | read-only | Total number of received characters which were rejected because a framing error was detected. This counter only applies to physical serial ports. The value 0 will be returned for all other ports. |
| CTR vPortOverrunErrs | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.64 | Counter | read-only | Total number of received characters which were rejected for lack of character FIFO space on the serial communication controller. This counter only applies to physical serial ports. The value 0 will be returned for all other ports. |
| CTR vPortParityErrs | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.65 | Counter | read-only | Total number of received characters which were rejected because a parity error was detected. This counter only applies to physical serial ports. The value 0 will be returned for all other ports. |
| CTR vPortCharsDropped | 1.3.6.1.4.1.22.65.1.2.6.1.2.14.1.66 | Counter | read-only | Total number of received characters which were rejected for any reason not covered in other objects, for example lack of input buffer space. This counter only applies to physical serial ports. The value 0 will be returned for all other ports. |
| fmxService | 1.3.6.1.4.1.22.65.1.2.6.1.3 | |||
| INT vSvcRatingMode | 1.3.6.1.4.1.22.65.1.2.6.1.3.1 | INTEGER | read-write | Determines the method of computation for the rating of local services. 'scaled(2)' indicates that an algorithm is used where the rating is scaled to be between 0 and 255. 'unScaled(1)' indicates that the service rating is equal to the number of available service ports. |
| INT vSvcCurrNumber | 1.3.6.1.4.1.22.65.1.2.6.1.3.2 | INTEGER | read-only | An integer indicating the current number of entries in vSvcTable. This object is not constant. |
| vSvcTable | 1.3.6.1.4.1.22.65.1.2.6.1.3.3 | not-accessible | A list of service entries. The number of entries is given by the value of vSvcCurrNumber. | |
| vSvcEntry | 1.3.6.1.4.1.22.65.1.2.6.1.3.3.1 | not-accessible | Status and parameter values for a service. | |
| STR vSvcName | 1.3.6.1.4.1.22.65.1.2.6.1.3.3.1.1 | DisplayString | read-write | A string which identifies the service uniquely among all other local services configured in the unit. This name is transmitted as part of the unit's LAT-compatible multicast messages. On a set-request the string is automatically converted to upper-case, as lower-case service names are not allowed on the server. |
| OCT vSvcPorts | 1.3.6.1.4.1.22.65.1.2.6.1.3.3.1.2 | OCTET STRING | read-write | A 32-byte string which represents a bit map of which server ports are enabled for the service. Each server port is represented by one bit in the 32 bytes. If the bit is turned on, the corresponding server port is enabled for the service. The least significant bit of each byte represents the lowest of the ports for that byte. For example, port 1 (port with vPortIndex = 1) is represented by the least significant bit of the first byte, and port 16 (port with vPortIndex = 16) is represented by the most significant bit of the second byte, etc. Note that 32 bytes allows for up to 256 ports. For servers configured with less than 256 ports, all bits above the highest port number must always be zero. Note also that ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' cannot be enabled on a service. |
| STR vSvcIdent | 1.3.6.1.4.1.22.65.1.2.6.1.3.3.1.3 | DisplayString | read-write | A locally-administered identification string which is associated with the service and is transmitted as part of the unit's LAT-compatible multicast messages. |
| INT vSvcRating | 1.3.6.1.4.1.22.65.1.2.6.1.3.3.1.4 | INTEGER | read-only | An integer indicating the ability for connections to this service to be accepted by the server. The higher the value, the more able the server is to accept connections to this service. A very low value indicates that the resources for this service are close to exhausted. The most dominant factor for determining the service rating is the number of idle ports which are enabled for the service. If a service has no idle ports enabled, its rating is zero. This number is transmitted as part of the unit's LAT-compatible multicast messages. |
| INT vSvcLtEnable | 1.3.6.1.4.1.22.65.1.2.6.1.3.3.1.5 | INTEGER | read-write | Indicates whether the server will accept connections to this service over the LAT-compatible protocol. 'disabled(2)' indicates that LAT-compatible connections will not be accepted. |
| INT vSvcTelEnable | 1.3.6.1.4.1.22.65.1.2.6.1.3.3.1.6 | INTEGER | read-write | Indicates whether the server will accept connections to this service over the Telnet protocol. 'disabled(2)' indicates that Telnet connections will not be accepted. |
| INT vSvcLprEnable | 1.3.6.1.4.1.22.65.1.2.6.1.3.3.1.7 | INTEGER | read-write | Indicates whether the server will accept connections to this service over the LPR line printer protocol. 'disabled(2)' indicates that LPR connections will not be accepted. |
| INT vSvcRawEnable | 1.3.6.1.4.1.22.65.1.2.6.1.3.3.1.8 | INTEGER | read-write | If enabled(1), indicates that the server will not interpret Telnet interesting characters when a Telnet connection is established to the service. |
| INT vSvcVirtualEnable | 1.3.6.1.4.1.22.65.1.2.6.1.3.3.1.9 | INTEGER | read-write | Indicates whether the virtual characteristic is enabled or not on this service. Refer to the user manual for more information on the service virtual characteristic. |
| OCT vSvcVirtualText | 1.3.6.1.4.1.22.65.1.2.6.1.3.3.1.10 | OCTET STRING | read-write | Defines the virtual text string for this service. Refer to the user manual for more information on the function of the service virtual text string. |
| INT vSvcConnectEnable | 1.3.6.1.4.1.22.65.1.2.6.1.3.3.1.11 | INTEGER | read-write | Indicates whether connections are presently being accepted for this service or not. It is a way of temporarily turning off the service without deleting it from the table. |
| STR vSvcPassword | 1.3.6.1.4.1.22.65.1.2.6.1.3.3.1.12 | DisplayString | read-write | Defines the password that must be correctly supplied before a session to this service can be established. a zero-length value indicates that no password must be supplied. Note that on a set-request, the new value is automatically converted to upper-case, as is the user password input. |
| INT vSvcQueueEnable | 1.3.6.1.4.1.22.65.1.2.6.1.3.3.1.13 | INTEGER | read-write | Indicates whether or not the server will queue connection requests to the service if it is unavailable. |
| IP vSvcIpAddr | 1.3.6.1.4.1.22.65.1.2.6.1.3.3.1.14 | IpAddress | read-write | Indicates the only IP address upon which the service will carry TCP sessions. This is used when the server has multiple IP addresses and it is desired that the service only respond to connection requests on one of those addresses. A value of 0.0.0.0 indicates that any of the server's IP addresses can be used to connect to this service. |
| INT vSvcTcpPort | 1.3.6.1.4.1.22.65.1.2.6.1.3.3.1.15 | INTEGER | read-write | Indicates the TCP port on which this service accepts TCP connections. A value of zero normally means that no TCP port has been assigned. |
| STR vSvcProfile | 1.3.6.1.4.1.22.65.1.2.6.1.3.3.1.16 | DisplayString | read-write | Indicates the profile entry in the vProfTable which is used to determine Telnet parameters when a Telnet connection is accepted to the service. A zero-length value indicates that only default profile parameter values will be used. |
| INT vSvcStatus | 1.3.6.1.4.1.22.65.1.2.6.1.3.3.1.17 | INTEGER | read-write | The current status of this service entry. Setting this object to the value invalid(2) has the effect of deleting the entry from the service table. |
| fmxProfile | 1.3.6.1.4.1.22.65.1.2.6.1.4 | |||
| INT vProfCurrNumber | 1.3.6.1.4.1.22.65.1.2.6.1.4.1 | INTEGER | read-only | An integer indicating the current number of entries in vProfTable. This object is not constant. |
| vProfTable | 1.3.6.1.4.1.22.65.1.2.6.1.4.2 | not-accessible | A list of profile entries. The number of entries is given by the value of vProfCurrNumber. | |
| vProfEntry | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1 | not-accessible | Parameter values for a profile entry. | |
| STR vProfName | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.1 | DisplayString | read-write | A unique string value for each profile. |
| STR vProfDomain | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.2 | DisplayString | read-write | A domain name extension that may be appended to a user-specified hostname with which the user wishes to start a session. For example, if the user's port profile has a vProfDomain of 'dss.com', and the user attempts to start a session to the specified host 'pluto,' the server will first attempt to resolve the hostname 'pluto,' and if this is unsuccessful it will then attempt to resolve the hostname 'pluto.dss.com.' This automatic appending of domain extension is only attempted if the value of vProfConcatenate is 'enabled(1).' A zero-length value indicates that no extension is used. |
| INT vProfConcatenate | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.3 | INTEGER | read-write | An indication of whether the server will append the value of vProfDomain to a user-specified hostname when the user wishes to start a session to the host (see vProfDomain). 'enabled(1)' indicates that the server will attempt to resolve the concatenated hostname if the unconcatenated hostname cannot be resolved to an IP address. 'disabled(2)' indicates that the server will not attempt the hostname concatenization. |
| INT vProfPermHostOnly | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.4 | INTEGER | read-write | An indication of whether the server will attempt to resolve a user-specified hostname through the network nameserver protocol for ports with this profile. 'disabled(1)' indicates that the server will automatically attempt to resolve an unknown user-specified hostname. 'enabled(2)' indicates that if the user-specified hostname is not already in the hostname table, the server will not attempt to resolve it through the nameserver protocol. |
| INT vProfTcpPort | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.5 | INTEGER | read-write | The default remote TCP port to which the server will attempt to connect when a user starts a Telnet/Rlogin session on a port with this profile. |
| INT vProfTcpTimeout | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.6 | INTEGER | read-write | The maximum number of seconds TCP will wait for an acknowledgement before terminating the session. |
| INT vProfTcpKeepalive | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.7 | INTEGER | read-write | The number of seconds that the sessions intiated with this profile may remain idle (no characters transmitted or recieved) before a TCP keepalive message is generated. A value of 0 indicates that keepalive messages are never generated. |
| INT vProfIpTTL | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.8 | INTEGER | read-write | The value of the IP time to live on packets transmitted for sessions initiated with this profile. |
| INT vProfIpPrecedence | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.9 | INTEGER | read-write | The value of the IP precedence on packets transmitted for sessions initiated with this profile. |
| STR vProfTermType | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.10 | DisplayString | read-write | The terminal type that Telnet/Rlogin will attempt to negotiate with the remote node for sessions initiated with this profile. A zero-length value indicates that no terminal type is negotiated. |
| OCT vProfCrToNet | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.11 | OCTET STRING | read-write | The character sequence which is sent by Telnet to the remote node to indicate a carriage return in the data stream for sessions initiated with this profile. |
| OCT vProfCrFromTerm | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.12 | OCTET STRING | read-write | The local character sequence which, when delivered to Telnet for transmission, is interpreted as a carriage return and translated to the sequence indicated by vProfCrToNet for sessions initiated with this profile. |
| CHA vProfPadChar | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.13 | Character | read-write | The character used by the local Telnet implementation to pad transmitted data immediately following a carriage return for sessions initiated with this profile. A value of 0 indicates that the character is disabled. |
| INT vProfPadLength | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.14 | INTEGER | read-write | The number of pad characters inserted into the data stream by the local Telnet implementation immediately following a carriage return for sessions initiated with this profile. |
| CHA vProfEndRecord | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.15 | Character | read-write | The local character which, when delivered to Telnet for transmission, is interpreted as an end-of-record character and translated to the appropriate Telnet control function for sessions initiated with this profile. A value of 255 indicates that the character is disabled. |
| CHA vProfNop | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.16 | Character | read-write | The local character which, when delivered to Telnet for transmission, is interpreted as a no-op character and translated to the appropriate Telnet control function for sessions initiated with this profile. A value of 255 indicates that the character is disabled. |
| CHA vProfDataMark | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.17 | Character | read-write | The local character which, when delivered to Telnet for transmission, is interpreted as a data mark character and translated to the appropriate Telnet control function for sessions initiated with this profile. A value of 255 indicates that the character is disabled. |
| CHA vProfBreak | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.18 | Character | read-write | The local character which, when delivered to Telnet for transmission, is interpreted as a break character and translated to the appropriate Telnet control function for sessions initiated with this profile. A value of 255 indicates that the character is disabled. |
| CHA vProfIntProcess | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.19 | Character | read-write | The local character which, when delivered to Telnet for transmission, is interpreted as the interrupt process character and translated to the appropriate Telnet control function for sessions initiated with this profile. A value of 255 indicates that the character is disabled. |
| CHA vProfAbortOutput | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.20 | Character | read-write | The local character which, when delivered to Telnet for transmission, is interpreted as the abort output character and translated to the appropriate Telnet control function for sessions initiated with this profile. A value of 255 indicates that the character is disabled. |
| CHA vProfAttention | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.21 | Character | read-write | The local character which, when delivered to Telnet for transmission, is interpreted as the attention character and translated to the appropriate Telnet control function for sessions initiated with this profile. A value of 255 indicates that the character is disabled. |
| CHA vProfEraseChar | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.22 | Character | read-write | The local character which, when delivered to Telnet for transmission, is interpreted as the backspace character and translated to the appropriate Telnet control function for sessions initiated with this profile. A value of 255 indicates that the character is disabled. |
| CHA vProfEraseLine | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.23 | Character | read-write | The local character which, when delivered to Telnet for transmission, is interpreted as the erase line character and translated to the appropriate Telnet control function for sessions initiated with this profile. A value of 255 indicates that the character is disabled. |
| CHA vProfGoAhead | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.24 | Character | read-write | The local character which, when delivered to Telnet for transmission, is interpreted as the go ahead character and translated to the appropriate Telnet control function for sessions initiated with this profile. A value of 255 indicates that the character is disabled. |
| INT vProfNullPass | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.25 | INTEGER | read-write | When enabled, null characters received by Telnet immediately following carriage return characters are passed through the data stream untouched. When disabled, these padding null characters are removed from the received data stream. This applies to sessions initiated with this profile. |
| INT vProfLocalEcho | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.26 | INTEGER | read-write | Determines how the local Telnet entity negotiates the local echo option with the remote Telnet entity for sessions initiated with this profile. 'attempt(1)' indicates the the local Telnet entity actively attempts to enable the option. 'refuse(2)' indicates that the local Telnet entity will refuse to enable the option even when requested by the remote entity. 'allow(3) indicates that the local Telnet entity will not actively attempt to enable the option, but will enable the option when requested by the remote entity. |
| INT vProfRemoteEcho | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.27 | INTEGER | read-write | Determines how the local Telnet entity negotiates the remote echo option with the remote Telnet entity for sessions initiated with this profile. 'attempt(1)' indicates the the local Telnet entity actively attempts to enable the option. 'refuse(2)' indicates that the local Telnet entity will refuse to enable the option even when requested by the remote entity. 'allow(3) indicates that the local Telnet entity will not actively attempt to enable the option, but will enable the option when requested by the remote entity. |
| INT vProfLocalBinary | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.28 | INTEGER | read-write | Determines how the local Telnet entity negotiates the local binary option with the remote Telnet entity for sessions initiated with this profile. 'attempt(1)' indicates the the local Telnet entity actively attempts to enable the option. 'refuse(2)' indicates that the local Telnet entity will refuse to enable the option even when requested by the remote entity. 'allow(3) indicates that the local Telnet entity will not actively attempt to enable the option, but will enable the option when requested by the remote entity. |
| INT vProfRemoteBinary | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.29 | INTEGER | read-write | Determines how the local Telnet entity negotiates the remote binary option with the remote Telnet entity for sessions initiated with this profile. 'attempt(1)' indicates the the local Telnet entity actively attempts to enable the option. 'refuse(2)' indicates that the local Telnet entity will refuse to enable the option even when requested by the remote entity. 'allow(3) indicates that the local Telnet entity will not actively attempt to enable the option, but will enable the option when requested by the remote entity. |
| INT vProfStatus | 1.3.6.1.4.1.22.65.1.2.6.1.4.2.1.30 | INTEGER | read-write | The current status of this profile entry. Setting this object to the value invalid(2) has the effect of deleting the entry from the profile table. |
| fmxIpSecurity | 1.3.6.1.4.1.22.65.1.2.6.1.5 | |||
| INT vSecEnable | 1.3.6.1.4.1.22.65.1.2.6.1.5.1 | INTEGER | read-write | Determines whether or not the server's IP security feature is enabled. |
| INT vSecCurrNumber | 1.3.6.1.4.1.22.65.1.2.6.1.5.2 | INTEGER | read-only | An integer indicating the current number of entries in vSecTable. This object is not constant. |
| vSecTable | 1.3.6.1.4.1.22.65.1.2.6.1.5.3 | not-accessible | A list of security entries. The number of entries is given by the value of vSecCurrNumber. | |
| vSecEntry | 1.3.6.1.4.1.22.65.1.2.6.1.5.3.1 | not-accessible | Parameter values for a security entry. | |
| INT vSecIndex | 1.3.6.1.4.1.22.65.1.2.6.1.5.3.1.1 | INTEGER | read-write | A unique value for each security entry. |
| IP vSecAddress | 1.3.6.1.4.1.22.65.1.2.6.1.5.3.1.2 | IpAddress | read-write | The target address of the IP security entry. |
| IP vSecMask | 1.3.6.1.4.1.22.65.1.2.6.1.5.3.1.3 | IpAddress | read-write | A mask which is applied to vSecAddress to determine its significant bits. |
| LTG vSecGroups | 1.3.6.1.4.1.22.65.1.2.6.1.5.3.1.4 | LtGroupList | read-write | A set of group numbers which determines which security entries are in use on which ports. |
| INT vSecStatus | 1.3.6.1.4.1.22.65.1.2.6.1.5.3.1.5 | INTEGER | read-write | The current status of this security entry. Setting this object to the value invalid(2) has the effect of deleting the entry from the security table. |
| fmxHostname | 1.3.6.1.4.1.22.65.1.2.6.1.6 | |||
| INT vHostCurrNumber | 1.3.6.1.4.1.22.65.1.2.6.1.6.1 | INTEGER | read-only | An integer indicating the current number of entries in vHostTable. This object is not constant. |
| vHostTable | 1.3.6.1.4.1.22.65.1.2.6.1.6.2 | not-accessible | A list of hostname entries. The number of entries is given by the value of vHostCurrNumber. | |
| vHostEntry | 1.3.6.1.4.1.22.65.1.2.6.1.6.2.1 | not-accessible | Parameter and status values for a hostname entry. | |
| STR vHostHostname | 1.3.6.1.4.1.22.65.1.2.6.1.6.2.1.1 | DisplayString | read-write | The hostname of the host. Note that if the value of vNsAllowLowerCase is 'disabled(2)', then on a set-request the specified hostname is automatically converted to upper case. |
| IP vHostAddress | 1.3.6.1.4.1.22.65.1.2.6.1.6.2.1.2 | IpAddress | read-write | The IP address of the host. |
| INT vHostTTL | 1.3.6.1.4.1.22.65.1.2.6.1.6.2.1.3 | INTEGER | read-only | The time to live (in seconds) of this entry in the host table. If the entry has been dynamically created by the nameserver protocol, the TTL will be a non-zero value indicating its remaining lifetime. Upon expiration of the TTL the entry is automatically deleted from the table. If the entry was created by a network administrator, the entry is considered 'permanent' and the value of its vHostTTL will be 0. |
| INT vHostStatus | 1.3.6.1.4.1.22.65.1.2.6.1.6.2.1.4 | INTEGER | read-write | The desired status of this host entry. Setting this object to the value 'invalid(2)' indicates that the entry is desired to be deleted from the host table. Only permanent entries will be deleted (entries for which the value of vHostTTL is 0). Dynamic entries are only deleted upon expiration of their vHostTTL or upon system re-initialization. |
| fmxNameserver | 1.3.6.1.4.1.22.65.1.2.6.1.7 | |||
| INT vNsRequestMode | 1.3.6.1.4.1.22.65.1.2.6.1.7.1 | INTEGER | read-write | The current mode of network hostname resolution. 'recursive(1)' indicates that the server sends recursive-type requests to network nameservers. 'nonRecursive(2)' indicates that the server does not send recursive-type nameserver requests. |
| INT vNsAllowLowerCase | 1.3.6.1.4.1.22.65.1.2.6.1.7.2 | INTEGER | read-write | Determines whether the nameserver resolver will automatically convert user-specified hostnames to upper case before attempting to resolve them. 'disabled(2)' indicates that automatic conversion to upper case will take place. |
| INT vNsCurrNumber | 1.3.6.1.4.1.22.65.1.2.6.1.7.3 | INTEGER | read-only | An integer indicating the current number of entries in vNsTable. This object is not constant. |
| vNsTable | 1.3.6.1.4.1.22.65.1.2.6.1.7.4 | not-accessible | A list of nameserver entries. The number of entries is given by the value of vNsCurrNumber. | |
| vNsEntry | 1.3.6.1.4.1.22.65.1.2.6.1.7.4.1 | not-accessible | Parameter values for a nameserver entry. | |
| IP vNsAddress | 1.3.6.1.4.1.22.65.1.2.6.1.7.4.1.1 | IpAddress | read-write | The IP address of the nameserver host. |
| STR vNsHostname | 1.3.6.1.4.1.22.65.1.2.6.1.7.4.1.2 | DisplayString | read-only | The resolved hostname of the nameserver host A zero- length value indicates that the hostname is unknown at the present time. |
| TIK vNsTTL | 1.3.6.1.4.1.22.65.1.2.6.1.7.4.1.3 | TimeTicks | read-only | The time to live (in seconds) of this entry in the nameserver table. If the entry has been dynamically created by the nameserver protocol, the TTL will be a non-zero value indicating its remaining lifetime. Upon expiration of the TTL the entry is automatically deleted from the table. If the entry was created by a network administrator, the entry is considered 'permanent' and the value of its vNsTTL will be 0. |
| INT vNsStatus | 1.3.6.1.4.1.22.65.1.2.6.1.7.4.1.4 | INTEGER | read-write | The status of this nameserver entry. Setting this object to the value 'invalid(2)' has the effect of deleting the entry from the nameserver table. Dynamic entries are also automatically deleted upon expiration of their vNsTTL or upon system re-initialization. |
| fmxTacacs | 1.3.6.1.4.1.22.65.1.2.6.1.8 | |||
| INT vTacServerCurrNumber | 1.3.6.1.4.1.22.65.1.2.6.1.8.1 | INTEGER | read-only | An integer indicating the current number of entries in vTacTable. This object is not constant. |
| vTacTable | 1.3.6.1.4.1.22.65.1.2.6.1.8.2 | not-accessible | A list of Tacacs server entries. The number of entries is given by the value of vTacServerCurrNumber. | |
| vTacEntry | 1.3.6.1.4.1.22.65.1.2.6.1.8.2.1 | not-accessible | Parameter values for a Tacacs server entry. | |
| IP vTacAddress | 1.3.6.1.4.1.22.65.1.2.6.1.8.2.1.1 | IpAddress | read-write | The IP address of the Tacacs server host. |
| STR vTacHostname | 1.3.6.1.4.1.22.65.1.2.6.1.8.2.1.2 | DisplayString | read-only | The resolved hostname of the Tacacs server host. If the hostname is currently unknown, a zero-length value is returned. |
| INT vTacStatus | 1.3.6.1.4.1.22.65.1.2.6.1.8.2.1.3 | INTEGER | read-write | The current status of this Tacacs server entry. Setting this object to the value invalid(2) has the effect of deleting the entry from the Tacacs server table. |
| fmxIp | 1.3.6.1.4.1.22.65.1.2.6.1.9 | |||
| IP vIpBcastAddr | 1.3.6.1.4.1.22.65.1.2.6.1.9.1 | IpAddress | read-write | The IP address to be used for IP limited broadcasts originating from this unit. |
| INT vIpMaxAddr | 1.3.6.1.4.1.22.65.1.2.6.1.9.2 | INTEGER | read-write | An integer indicating the maximum number of IP addresses that can be simultaneously assigned to this unit, totaling over all interfaces. Note that the server must be rebooted before a change in the value of this variable actually takes effect. |
| INT vIpMaxHostHashEntries | 1.3.6.1.4.1.22.65.1.2.6.1.9.3 | INTEGER | read-write | An integer indicating the number of buckets in the host route hash table. Note that the server must be rebooted before a change in the value of this variable actually takes effect. |
| INT vIpMaxNetHashEntries | 1.3.6.1.4.1.22.65.1.2.6.1.9.4 | INTEGER | read-write | An integer indicating the number of buckets in the network route hash table. Note that the server must be rebooted before a change in the value of this variable actually takes effect. |
| INT vIpMaxInterfaces | 1.3.6.1.4.1.22.65.1.2.6.1.9.5 | INTEGER | read-write | An integer indicating the maximum number of IP interfaces of all types that can be configured on the unit. Note that the server must be rebooted before a change in the value of this variable actually takes effect. |
| INT vIpMaxRoutes | 1.3.6.1.4.1.22.65.1.2.6.1.9.6 | INTEGER | read-write | An integer indicating the maximum number of entries in the unit's route table. Note that the server must be rebooted before a change in the value of this variable actually takes effect. |
| fmxArp | 1.3.6.1.4.1.22.65.1.2.6.1.10 | |||
| INT vArpMaxEntries | 1.3.6.1.4.1.22.65.1.2.6.1.10.1 | INTEGER | read-write | An integer indicating the maximum number of entries in the unit's ARP table. Note that the server must be rebooted before a change in the value of this variable actually takes effect. |
| INT vArpRetryTimeout | 1.3.6.1.4.1.22.65.1.2.6.1.10.2 | INTEGER | read-write | An integer indicating the number of seconds between ARP retransmit attempts. |
| INT vArpRetryMax | 1.3.6.1.4.1.22.65.1.2.6.1.10.3 | INTEGER | read-write | An integer indicating the maximum number of ARP retransmit attempts. |
| INT vArpConfirmTimer | 1.3.6.1.4.1.22.65.1.2.6.1.10.4 | INTEGER | read-write | An integer indicating the number of seconds between confirmations of an ARP entry. |
| INT vArpIdleTimeout | 1.3.6.1.4.1.22.65.1.2.6.1.10.5 | INTEGER | read-write | An integer indicating the number of seconds that a non-permanent ARP entry can go unused before it is deleted from the table. A non-permanent entry is one which was entered into the table by the ARP protocol rather than manually entered by a network administrator. |
| fmxTcp | 1.3.6.1.4.1.22.65.1.2.6.1.11 | |||
| INT vTcpIpPrecedence | 1.3.6.1.4.1.22.65.1.2.6.1.11.1 | INTEGER | read-write | An integer indicating the value of the IP precedence that the TCP layer will request. |
| INT vTcpSendQSize | 1.3.6.1.4.1.22.65.1.2.6.1.11.2 | INTEGER | read-write | An integer indicating the maximum number of data bytes that will be queued for transmission by the TCP protocol layer. |
| INT vTcpRcvWinSize | 1.3.6.1.4.1.22.65.1.2.6.1.11.3 | INTEGER | read-write | An integer indicating the TCP receive window size in bytes. |
| INT vTcpSegSize | 1.3.6.1.4.1.22.65.1.2.6.1.11.4 | INTEGER | read-write | An integer indicating the TCP segment size in bytes. |
| INT vTcpTimerInterval | 1.3.6.1.4.1.22.65.1.2.6.1.11.5 | INTEGER | read-write | An integer indicating the resolution (in 1/100 s) of all timer values used by TCP. |
| INT vTcpChecksumEnable | 1.3.6.1.4.1.22.65.1.2.6.1.11.6 | INTEGER | read-write | An integer indicating whether TCP checksums are enabled for all TCP connections. |
| fmxTelnet | 1.3.6.1.4.1.22.65.1.2.6.1.12 | |||
| INT vTelCourierEnable | 1.3.6.1.4.1.22.65.1.2.6.1.12.1 | INTEGER | read-write | Determines whether or not the Telnet courier feature is enabled. |
| OCT vTelCourierText | 1.3.6.1.4.1.22.65.1.2.6.1.12.2 | OCTET STRING | read-write | Defines the text which is tranmsitted for the Telnet courier feature. |
| INT vTelSessCurrNumber | 1.3.6.1.4.1.22.65.1.2.6.1.12.3 | INTEGER | read-only | An integer indicating the current number of entries in vTelSessTable. This object is not constant. |
| vTelSessTable | 1.3.6.1.4.1.22.65.1.2.6.1.12.4 | not-accessible | A list of Telnet session entries. The number of entries is given by the value of vTelSessCurrNumber. | |
| vTelSessEntry | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1 | not-accessible | Parameter and status values for a Telnet session entry. | |
| INT vTelSessPortIndex | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.1 | INTEGER | read-only | The value of vPortIndex for the port to which this session belongs. |
| INT vTelSessIndex | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.2 | INTEGER | read-only | The session index in the context of the port, a non-zero positive integer. Session indexes within a port need not be sequential. Session indexes may be reused for different ports. For example, port 1 and port 3 may both have a session 2 at the same time. |
| INT vTelSessOrigin | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.3 | INTEGER | read-only | The session's source of establishment. |
| INT vTelSessState | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.4 | INTEGER | read-only | The current state of the session. |
| INT vTelSessDisconnect | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.5 | INTEGER | read-write | A control to terminate the session. In response to a get-request or get-next-request, the agent always returns 'ready(1)' as the value. Setting the value to 'execute(2)' causes termination. |
| IP vTelSessLocalAddr | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.6 | IpAddress | read-only | The local IP address for this session. This object supplies part of the necessary index information to locate the corresponding session in the MIB II TcpConnTable. |
| INT vTelSessLocalTcpPort | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.7 | INTEGER | read-only | The local TCP port number for this session. This object supplies part of the necessary index information to locate the corresponding session in the MIB II TcpConnTable. |
| IP vTelSessRemAddr | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.8 | IpAddress | read-only | The remote IP address for this session. This object supplies part of the necessary index information to locate the corresponding session in the MIB II TcpConnTable. |
| INT vTelSessRemTcpPort | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.9 | INTEGER | read-only | The remote TCP port number for this session. This object supplies part of the necessary index information to locate the corresponding session in the MIB II TcpConnTable. |
| OCT vTelSessCrToNet | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.10 | OCTET STRING | read-write | The character sequence which is sent to the remote node of the session to indicate a carriage return in the data stream. |
| OCT vTelSessCrFromTerm | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.11 | OCTET STRING | read-write | The local character sequence which, when delivered to Telnet for transmission, is interpreted as a carriage return and translated to the sequence indicated by vTelSessCrToNet. |
| CHA vTelSessPadChar | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.12 | Character | read-write | The character used by the local Telnet implementation to pad transmitted data immediately following a carriage return. A value of 0 indicates that the character is disabled. |
| INT vTelSessPadLength | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.13 | INTEGER | read-write | The number of pad characters inserted into the data stream by the local Telnet implementation immediately following a carriage return. |
| INT vTelSessUserTimeout | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.14 | INTEGER | read-only | The maximum number of seconds Telnet instructs TCP to wait for an acknowledgement before terminating the session. |
| INT vTelSessKeepalive | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.15 | INTEGER | read-only | The number of seconds that the session may remain idle (no characters transmitted or recieved) before a TCP keepalive message is generated. A value of 0 indicates that keepalive messages are never generated. |
| INT vTelSessIpTTL | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.16 | INTEGER | read-only | The value of the IP time to live on packets transmitted for this session. |
| INT vTelSessIpPrecedence | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.17 | INTEGER | read-only | The value of the IP precedence on packets transmitted for this session. |
| CHA vTelSessEndRecord | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.18 | Character | read-write | The local character which, when delivered to Telnet for transmission, is interpreted as an end-of-record character and translated to the appropriate Telnet control function. A value of 255 indicates that the character is disabled. |
| CHA vTelSessNop | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.19 | Character | read-write | The local character which, when delivered to Telnet for transmission, is interpreted as a no-op character and translated to the appropriate Telnet control function. A value of 255 indicates that the character is disabled. |
| CHA vTelSessDataMark | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.20 | Character | read-write | The local character which, when delivered to Telnet for transmission, is interpreted as a data mark character and translated to the appropriate Telnet control function. A value of 255 indicates that the character is disabled. |
| CHA vTelSessBreak | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.21 | Character | read-write | The local character which, when delivered to Telnet for transmission, is interpreted as a break character and translated to the appropriate Telnet control function. A value of 255 indicates that the character is disabled. |
| CHA vTelSessIntProcess | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.22 | Character | read-write | The local character which, when delivered to Telnet for transmission, is interpreted as the interrupt process character and translated to the appropriate Telnet control function. A value of 255 indicates that the character is disabled. |
| CHA vTelSessAbortOutput | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.23 | Character | read-write | The local character which, when delivered to Telnet for transmission, is interpreted as the abort output character and translated to the appropriate Telnet control function. A value of 255 indicates that the character is disabled. |
| CHA vTelSessAttention | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.24 | Character | read-write | The local character which, when delivered to Telnet for transmission, is interpreted as the attention character and translated to the appropriate Telnet control function. A value of 255 indicates that the character is disabled. |
| CHA vTelSessEraseChar | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.25 | Character | read-write | The local character which, when delivered to Telnet for transmission, is interpreted as the backspace character and translated to the appropriate Telnet control function. A value of 255 indicates that the character is disabled. |
| CHA vTelSessEraseLine | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.26 | Character | read-write | The local character which, when delivered to Telnet for transmission, is interpreted as the erase line character and translated to the appropriate Telnet control function. A value of 255 indicates that the character is disabled. |
| CHA vTelSessGoAhead | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.27 | Character | read-write | The local character which, when delivered to Telnet for transmission, is interpreted as the go ahead character and translated to the appropriate Telnet control function. A value of 255 indicates that the character is disabled. |
| INT vTelSessNullPass | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.28 | INTEGER | read-write | When enabled, null characters received by Telnet immediately following carriage return characters are passed through the data stream untouched. When disabled, these padding null characters are removed from the received data stream. |
| STR vTelSessTermType | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.29 | DisplayString | read-only | A text string indicating the currently negotiated terminal type for the session. A zero-length value indicates no terminal type has been negotiated. |
| INT vTelSessLocalEcho | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.30 | INTEGER | read-only | When enabled, the local Telnet will perform local echoing of all data delivered to it for transmission. |
| INT vTelSessRemoteEcho | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.31 | INTEGER | read-only | When enabled, the remote Telnet will perform echoing of all received network data. |
| INT vTelSessLocalBinary | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.32 | INTEGER | read-only | When enabled, the local Telnet will transmit data in binary mode. |
| INT vTelSessRemoteBinary | 1.3.6.1.4.1.22.65.1.2.6.1.12.4.1.33 | INTEGER | read-only | When enabled, the remote Telnet will transmit data in binary mode. |
| fmxRlogin | 1.3.6.1.4.1.22.65.1.2.6.1.13 | |||
| INT vRlogSessCurrNumber | 1.3.6.1.4.1.22.65.1.2.6.1.13.1 | INTEGER | read-only | An integer indicating the current number of entries in vRlogSessTable. This object is not constant. |
| vRlogSessTable | 1.3.6.1.4.1.22.65.1.2.6.1.13.2 | not-accessible | A list of Rlogin session entries. The number of entries is given by the value of vRlogSessCurrNumber. | |
| vRlogSessEntry | 1.3.6.1.4.1.22.65.1.2.6.1.13.2.1 | not-accessible | Parameter and status values for a Rlogin session entry. | |
| INT vRlogSessPortIndex | 1.3.6.1.4.1.22.65.1.2.6.1.13.2.1.1 | INTEGER | read-only | The value of vPortIndex for the port to which this session belongs. |
| INT vRlogSessIndex | 1.3.6.1.4.1.22.65.1.2.6.1.13.2.1.2 | INTEGER | read-only | The session index in the context of the port, a non-zero positive integer. Session indexes within a port need not be sequential. Session indexes may be reused for different ports. For example, port 1 and port 3 may both have a session 2 at the same time. |
| INT vRlogSessOrigin | 1.3.6.1.4.1.22.65.1.2.6.1.13.2.1.3 | INTEGER | read-only | The session's source of establishment. |
| INT vRlogSessState | 1.3.6.1.4.1.22.65.1.2.6.1.13.2.1.4 | INTEGER | read-only | The current state of the session. |
| INT vRlogSessDisconnect | 1.3.6.1.4.1.22.65.1.2.6.1.13.2.1.5 | INTEGER | read-write | A control to terminate the session. In response to a get-request or get-next-request, the agent always returns 'ready(1)' as the value. Setting the value to 'execute(2)' causes termination. |
| IP vRlogSessLocalAddr | 1.3.6.1.4.1.22.65.1.2.6.1.13.2.1.6 | IpAddress | read-only | The local IP address for this session. This object supplies part of the necessary index information to locate the corresponding session in the MIB II TcpConnTable. |
| INT vRlogSessLocalTcpPort | 1.3.6.1.4.1.22.65.1.2.6.1.13.2.1.7 | INTEGER | read-only | The local TCP port number for this session. This object supplies part of the necessary index information to locate the corresponding session in the MIB II TcpConnTable. |
| IP vRlogSessRemAddr | 1.3.6.1.4.1.22.65.1.2.6.1.13.2.1.8 | IpAddress | read-only | The remote IP address for this session. This object supplies part of the necessary index information to locate the corresponding session in the MIB II TcpConnTable. |
| INT vRlogSessRemTcpPort | 1.3.6.1.4.1.22.65.1.2.6.1.13.2.1.9 | INTEGER | read-only | The remote TCP port number for this session. This object supplies part of the necessary index information to locate the corresponding session in the MIB II TcpConnTable. |
| STR vRlogSessTermType | 1.3.6.1.4.1.22.65.1.2.6.1.13.2.1.10 | DisplayString | read-only | A text string indicating the currently negotiated terminal type for the session. A zero-length value indicates no terminal type has been negotiated. |
| fmxLt | 1.3.6.1.4.1.22.65.1.2.6.1.14 | |||
| STR vLtNodeName | 1.3.6.1.4.1.22.65.1.2.6.1.14.1 | DisplayString | read-write | The LAT-compatible node name for this unit. This name is transmitted as part of the node's LAT-compatible multicast messages. |
| STR vLtNodeID | 1.3.6.1.4.1.22.65.1.2.6.1.14.2 | DisplayString | read-write | The LAT-compatible identification string for this server. This string is transmitted as part of the agent's LAT-compatible multicast messages. |
| LTG vLtNodeGroups | 1.3.6.1.4.1.22.65.1.2.6.1.14.3 | LtGroupList | read-write | A bit string indicating the LAT-compatible groups which are transmitted as part of the node's LAT-compatible multicast messages. |
| INT vLtNumber | 1.3.6.1.4.1.22.65.1.2.6.1.14.4 | INTEGER | read-write | An integer indicating the LAT-compatible number that is tranmsitted as part of the node's LAT-compatible multicast messages. |
| INT vLtMcastEnable | 1.3.6.1.4.1.22.65.1.2.6.1.14.5 | INTEGER | read-write | An integer indicating whether the unit's LAT-compatible periodic multicast is enabled or not. If enabled, the unit will transmit one LAT-compatible multicast message every vLtMcastTimer seconds if it has any local services to announce. |
| INT vLtMcastTimer | 1.3.6.1.4.1.22.65.1.2.6.1.14.6 | INTEGER | read-write | An integer indicating the unit's multicast timer value in seconds. If multicasts are enabled, the unit will transmit one LAT-compatible multicast message every vLtMcastTimer seconds if it has any local services to announce. |
| INT vLtCktTimer | 1.3.6.1.4.1.22.65.1.2.6.1.14.7 | INTEGER | read-write | An integer indicating the unit's circuit timer value in milliseconds. For circuits on which the unit is the master, circuit data is collected for transmission once every circuit timer interval. |
| INT vLtKeepaliveTimer | 1.3.6.1.4.1.22.65.1.2.6.1.14.8 | INTEGER | read-write | An integer indicating the unit's keepalive timer value in seconds. For circuits on which the unit is the master, a keepalive message is transmitted once every keepalive timer interval if the circuit is otherwise idle. |
| INT vLtMaxRetran | 1.3.6.1.4.1.22.65.1.2.6.1.14.9 | INTEGER | read-write | An integer indicating the maximum number of times the unit will attempt to retransmit LAT-compatible messages. |
| INT vLtSlotPerCkt | 1.3.6.1.4.1.22.65.1.2.6.1.14.10 | INTEGER | read-write | An integer indicating the maximum number of slots per circuit that the unit can support. This effectively limits the number of sessions the unit can maintain with any other node on a single circuit. |
| INT vLtMaxNodes | 1.3.6.1.4.1.22.65.1.2.6.1.14.11 | INTEGER | read-write | An integer indicating the maximum number of LAT-compatible nodes about which the unit will maintain information necessary for session establishment. When the unit receives LAT-compatible multicasts, it enters the pertinent information into its internal node table. This object indicates the maximum number of entries in the node table. |
| INT vLtMaxSvcs | 1.3.6.1.4.1.22.65.1.2.6.1.14.12 | INTEGER | read-write | An integer indicating the maximum number of LAT-compatible services about which the unit will maintain information necessary for session establishment. When the unit receives LAT-compatible multicasts, it enters the pertinent information into its internal service table. This object indicates the size of the service table. |
| INT vLtMaxCkts | 1.3.6.1.4.1.22.65.1.2.6.1.14.13 | INTEGER | read-write | An integer indicating the maximum number of simultaneous active LAT-compatible circuits. In effect this object governs the maximum number of LAT-compatible nodes with which the unit can maintain simultaneous connections. |
| INT vLtSessCurrNumber | 1.3.6.1.4.1.22.65.1.2.6.1.14.14 | INTEGER | read-only | An integer indicating the current number of entries in vLtSessTable. This object is not constant. |
| vLtSessTable | 1.3.6.1.4.1.22.65.1.2.6.1.14.15 | not-accessible | A list of LAT-compatible session entries. The number of entries is given by the value of vLtSessCurrNumber. | |
| vLtSessEntry | 1.3.6.1.4.1.22.65.1.2.6.1.14.15.1 | not-accessible | Parameter and status values for a LAT-compatible session entry. | |
| INT vLtSessPortIndex | 1.3.6.1.4.1.22.65.1.2.6.1.14.15.1.1 | INTEGER | read-only | The value of vPortIndex for the port to which this session belongs. |
| INT vLtSessIndex | 1.3.6.1.4.1.22.65.1.2.6.1.14.15.1.2 | INTEGER | read-only | The session index in the context of the port, a non-zero positive integer. Session indexes within a port need not be sequential. Session indexes may be reused for different ports. For example, port 1 and port 3 may both have a session 2 at the same time. |
| INT vLtSessOrigin | 1.3.6.1.4.1.22.65.1.2.6.1.14.15.1.3 | INTEGER | read-only | The session's source of establishment. 'network(2)' indicates that a remote node has started this session. 'local(3)' indicates that the session was started by the agent port given by vLtSessPortIndex. 'remote-port(4)' indicates that the session is local between two server ports, and the port given by vLtSessPortIndex was not the initiator of the session. |
| INT vLtSessState | 1.3.6.1.4.1.22.65.1.2.6.1.14.15.1.4 | INTEGER | read-only | The current state of the session. |
| INT vLtSessDisconnect | 1.3.6.1.4.1.22.65.1.2.6.1.14.15.1.5 | INTEGER | read-write | A control to terminate the session. In response to a get-request or get-next-request, the agent always returns 'ready(1)' as the value. Setting the value to 'execute(2)' causes termination. |
| STR vLtSessSvcName | 1.3.6.1.4.1.22.65.1.2.6.1.14.15.1.6 | DisplayString | read-only | A (readable) text string indicating the name of the LAT-compatible remote service. A zero-length value indicates that the remote service for this session is unknown. |
| STR vLtSessNodeName | 1.3.6.1.4.1.22.65.1.2.6.1.14.15.1.7 | DisplayString | read-only | A (readable) text string indicating the name of the LAT-compatible remote node. A zero-length value indicates that the remote node for this session is unknown. |
| STR vLtSessDestName | 1.3.6.1.4.1.22.65.1.2.6.1.14.15.1.8 | DisplayString | read-only | A (readable) text string indicating the name of the LAT-compatible remote destination port. A zero-length value indicates that the remote port name for this session is unknown. |
| CTR vLtTotalRcvPkts | 1.3.6.1.4.1.22.65.1.2.6.1.14.16 | Counter | read-only | A count of the total number of LAT-compatible messages received and processed by the unit. |
| CTR vLtTotalTrnPkts | 1.3.6.1.4.1.22.65.1.2.6.1.14.17 | Counter | read-only | A count of the total number of LAT-compatible messages transmitted by the unit. |
| CTR vLtTotalRetranPkts | 1.3.6.1.4.1.22.65.1.2.6.1.14.18 | Counter | read-only | A count of the total number of LAT-compatible messages retransmited. |
| CTR vLtRcvCorruptPkts | 1.3.6.1.4.1.22.65.1.2.6.1.14.19 | Counter | read-only | A count of the total number of LAT-compatible station packets recieved which were found to be invalid or corrupted. |
| CTR vLtRcvCorruptMcasts | 1.3.6.1.4.1.22.65.1.2.6.1.14.20 | Counter | read-only | A count of the total number of LAT-compatible multicast packets recieved which were found to be invalid or corrupted. |
| CTR vLtRcvDuplicatePkts | 1.3.6.1.4.1.22.65.1.2.6.1.14.21 | Counter | read-only | A count of the total number of LAT-compatible messages received which had already been acknowledged by the unit. |
| CTR vLtReqAccepted | 1.3.6.1.4.1.22.65.1.2.6.1.14.22 | Counter | read-only | A count of the total number of remote connection requests which were received and accepted by the unit. |
| CTR vLtReqRejected | 1.3.6.1.4.1.22.65.1.2.6.1.14.23 | Counter | read-only | A count of the total number of remote connection requests which were received and rejected by the unit. |
| CTR vLtTotalNodeDiscards | 1.3.6.1.4.1.22.65.1.2.6.1.14.24 | Counter | read-only | A count of the total number of LAT-compatible nodes that the unit has not been able to insert into its internal node table, due to resource failures. |
| fmxQueue | 1.3.6.1.4.1.22.65.1.2.6.1.15 | |||
| INT vQueMaxEntries | 1.3.6.1.4.1.22.65.1.2.6.1.15.1 | INTEGER | read-write | An integer indicating the maximum number of queued connection requests. This governs the maximum value that vQueCurrNumber can take. |
| INT vQueCurrNumber | 1.3.6.1.4.1.22.65.1.2.6.1.15.2 | INTEGER | read-only | An integer indicating the current number of entries in vQueTable. This object is not constant. |
| vQueTable | 1.3.6.1.4.1.22.65.1.2.6.1.15.3 | not-accessible | A list of queue entries. The number of entries is given by the value of vQueCurrNumber. | |
| vQueEntry | 1.3.6.1.4.1.22.65.1.2.6.1.15.3.1 | not-accessible | Parameter and status values for a queue entry. | |
| INT vQueEntryNumber | 1.3.6.1.4.1.22.65.1.2.6.1.15.3.1.1 | INTEGER | read-only | A unique identifier for the queue entry. Entry numbers may be re-used, but there will never be two simultaneous queue entries with the same value of vQueEntryNumber. |
| STR vQueSvcName | 1.3.6.1.4.1.22.65.1.2.6.1.15.3.1.2 | DisplayString | read-only | The name of the service for which this queue entry is awating connection. |
| STR vQueNodeName | 1.3.6.1.4.1.22.65.1.2.6.1.15.3.1.3 | DisplayString | read-only | The name of the remote node with which the connection will take place. |
| STR vQuePortName | 1.3.6.1.4.1.22.65.1.2.6.1.15.3.1.4 | DisplayString | read-only | The name of the port with which the connection will take place. |
| INT vQueStatus | 1.3.6.1.4.1.22.65.1.2.6.1.15.3.1.5 | INTEGER | read-write | The current status of the queue entry. Setting the value of this object to 'invalid(2)' has the effect of deleting the queue entry. |
| fmxSnmp | 1.3.6.1.4.1.22.65.1.2.6.1.16 | |||
| OCT vSnmpReadCommunity | 1.3.6.1.4.1.22.65.1.2.6.1.16.1 | OCTET STRING | read-write | A current community name in use by the agent for which get-requests and getnext-requests are permitted. |
| OCT vSnmpWriteCommunity | 1.3.6.1.4.1.22.65.1.2.6.1.16.2 | OCTET STRING | read-write | A current community name in use by the agent for which the set-request is permitted. |
| OCT vSnmpReadWriteCommunity | 1.3.6.1.4.1.22.65.1.2.6.1.16.3 | OCTET STRING | read-write | A current community name in use by the agent for which set-requests, get-requests, and getnext-requests are permitted. |
| INT vSnmpWriteEnable | 1.3.6.1.4.1.22.65.1.2.6.1.16.4 | INTEGER | read-write | An integer which indicates whether SET requests are permitted from any management station. This flag overrides use of the WRITE or READWRITE community names. Thus, if this object has the value disabled(2), no SET requests are permitted regardless of community name. |
| INT vSnmpTrapDestCurrNumber | 1.3.6.1.4.1.22.65.1.2.6.1.16.5 | INTEGER | read-only | An integer indicating the current number of entries in vSnmpTrapDestTable. This object is not constant. |
| vSnmpTrapDestTable | 1.3.6.1.4.1.22.65.1.2.6.1.16.6 | not-accessible | A list of destination management stations to which this agent will address certain generated trap messages. The number of entries is given by the value of vSnmpTrapDestCurrNumber. | |
| vSnmpTrapDestEntry | 1.3.6.1.4.1.22.65.1.2.6.1.16.6.1 | not-accessible | Parameter and status values for a SNMP trap destination entry. | |
| IP vSnmpTrapDestAddr | 1.3.6.1.4.1.22.65.1.2.6.1.16.6.1.1 | IpAddress | read-write | The IP address of this trap destination node. |
| INT vSnmpTrapDestCommunity | 1.3.6.1.4.1.22.65.1.2.6.1.16.6.1.2 | INTEGER | read-write | Indication of which of the three locally maintained community names will be used in trap messages addressed to this trap destination. |
| INT vSnmpTrapDestColdEnable | 1.3.6.1.4.1.22.65.1.2.6.1.16.6.1.3 | INTEGER | read-write | An indication of whether trap messages of the 'cold-start' type will be sent to this trap destination. |
| INT vSnmpTrapDestAuthEnable | 1.3.6.1.4.1.22.65.1.2.6.1.16.6.1.4 | INTEGER | read-write | An indication of whether trap messages of the 'authentication-failure' type will be sent to this trap destination. |
| INT vSnmpTrapDestStatus | 1.3.6.1.4.1.22.65.1.2.6.1.16.6.1.5 | INTEGER | read-write | The current status of the trap destination entry. Setting this object to the value 'invalid(2)' has the effect of deleting the entry. |
RFC description
Manages Fibronics FMX1830 terminal server configuration including ports, services, protocols, hostname, networking, and TACACS settings.
Start monitoring Fibronics FMX1830 terminal server (legacy, distinct from Nokia 1830 optical) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.