All MIBs › F3-LAG-MIB › f3LagMode
f3LagMode
Module: F3-LAG-MIB
OID (symbolic): F3-LAG-MIB::f3LagMode
OID (numeric): 1.3.6.1.4.1.2544.1.12.14.1.1.1.6
Node type: OBJECT-TYPE
Type: AggMode
Access: read-write
Description:
Defines the LAG behavior. A LAG with mode active-standby - exhibits 1:1 protection behavior loadsharing - exhibits port aggregation behavior An active-standby LAG supports 0-2 member ports. One member is in Active role while the other is in Standby role. A loadsharing LAG can have multiple (0-x) member ports, where x is as follows. x = 2 for GE112Pro, GE114Pro, GE206V (Network ports only) x = 2 for XG210 Network ports, x = 10 for XG210 Access ports x = 4 for XG116Pro, XG120Pro (10G ports) x = 6 for XG116Pro GE ports x = 10 for XG120Pro GE ports In CM Aggregation Shelf, the loadsharing LAG can have 2-8 member ports.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.14.1.1.1.6 snmpwalk -v2c -c public <target> F3-LAG-MIB::f3LagMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.14.1.1.1.6.1 snmpget -v2c -c public <target> F3-LAG-MIB::f3LagMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.14.1.1.1.6.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12.14 | f3LagMIB | F3-LAG-MIB |
| 1.3.6.1.4.1.2544.1.12.14.1 | f3LagObjects | F3-LAG-MIB |
| 1.3.6.1.4.1.2544.1.12.14.1.1 | f3LagTable | F3-LAG-MIB |
| 1.3.6.1.4.1.2544.1.12.14.1.1.1 | f3LagEntry | F3-LAG-MIB |
| 1.3.6.1.4.1.2544.1.12.14.1.1.1.6 | f3LagMode | F3-LAG-MIB |