F3-FPM-MIB

All MIBs › F3-FPM-MIB

Organization: ADVA Optical Networking

Last Updated: 2016-07-11

Description: F3-FPM-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is F3-FPM-MIB?

F3-FPM-MIB defines the Flow Point Model used by ADVA Optical Networking's FSP150CM/CC carrier Ethernet product line, modeling access and network flow points that anchor Ethernet services to physical or logical interfaces. It exposes configuration data such as VLAN membership, CoS marking, and shaping parameters, alongside operational data describing each flow point's health. For monitoring, the key value is state visibility: f3AccFlowPointAdminState, f3AccFlowPointOperationalState, and f3AccFlowPointSecondaryState let an operator determine whether a service flow point is administratively enabled and actually passing traffic, effectively a software/service-status indicator rather than a chassis-hardware one. It ties into the broader F3 platform object model, referencing associated flow IDs shared with other F3 MIBs like Connect Guard and SHG. It is used in carrier and enterprise deployments running ADVA FSP150 devices to deliver and troubleshoot point-to-point and multipoint Ethernet access services. Engineers can download the F3-FPM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in F3-FPM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ADVA FSP150CM/CC carrier Ethernet access/aggregation device

Monitoring Examples

An NMS would poll f3AccFlowPointTable/f3AccFlowPointEntry indexed by f3AccFlowPointIndex, checking f3AccFlowPointOperationalState against f3AccFlowPointAdminState to detect a flow point that is enabled but down, and cross-referencing f3AccFlowPointAssociatedFlowId to correlate with performance data in other tables. f3AccFlowPointIngressVlanMemberList and f3AccFlowPointIngressCOS reveal the configured VLAN and CoS classification, useful when diagnosing why traffic on a given service isn't matching expected QoS treatment. f3AccFlowPointEgressShapingType indicates whether egress shaping is applied, relevant when troubleshooting throughput complaints.

What Can Be Monitored

flow point admin state
flow point operational state
flow point secondary state
VLAN membership per flow point
ingress CoS marking
egress shaping configuration

Imported Objects

From ADVA-MIB

fsp150cm

OBJECT-IDENTITY

From CM-COMMON-MIB

AdminState
CmPmBinAction
CmPmIntervalType
FlowSecState
OperationalState
PerfCounter64
SecondaryState
VlanId
VlanPriority

From CM-ENTITY-MIB

neIndex	OBJECT-TYPE
shelfIndex	OBJECT-TYPE
slotIndex	OBJECT-TYPE

From CM-FACILITY-MIB

CmActiveControlProtocolsType
CmControlProtocolDispType
FlowTagControl
FlowVlanActionType
PolicerAlgorithmType
PolicerColorMode
ShapingType
cmEthernetAccPortIndex	OBJECT-TYPE
cmEthernetNetPortIndex	OBJECT-TYPE
cmMPFlowEntry	OBJECT-TYPE
cmMPFlowIndex	OBJECT-TYPE

From F3-BRIDGE-MIB

FlowLearningConfigAction
LearningAction
ProtectLearningControl

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
StorageType
TEXTUAL-CONVENTION
TruthValue
VariablePointer

OIDs

OID symbolic	OID numeric	Type	Access	Description
f3FpmMIB	1.3.6.1.4.1.2544.1.12.43			This module defines the Flow Point Model MIB definitions used by the F3 product lines. Copyright (C) ADVA Optical Networking.
f3FpmConfigObjects	1.3.6.1.4.1.2544.1.12.43.1
f3AccFlowPointTable	1.3.6.1.4.1.2544.1.12.43.1.1		not-accessible	A list of entries corresponding to Access Flow Point for configuration purposes.
f3AccFlowPointEntry	1.3.6.1.4.1.2544.1.12.43.1.1.1		not-accessible	A conceptual row in the f3AccFlowPointTable. These entries represent an Access Flow Point. If the Flow Point attached to a lag, the slotIndex should be 255 (255 is used to identify the Flow Point belongs to lag), and the cmEthernetAccPortIndex should be the f3LagIndex.
I32 f3AccFlowPointIndex	1.3.6.1.4.1.2544.1.12.43.1.1.1.1	Integer32	not-accessible	The integer index value corresponding to an Flow Point.
STR f3AccFlowPointAlias	1.3.6.1.4.1.2544.1.12.43.1.1.1.2	DisplayString	read-create	This object allows SNMP management entities to provide a circuit identifier with the Flow Point.
ADM f3AccFlowPointAdminState	1.3.6.1.4.1.2544.1.12.43.1.1.1.3	AdminState	read-create	This object represents the Administrative State of the Flow Point.
OPE f3AccFlowPointOperationalState	1.3.6.1.4.1.2544.1.12.43.1.1.1.4	OperationalState	read-only	This object represents the Operational State of the Flow Point.
SEC f3AccFlowPointSecondaryState	1.3.6.1.4.1.2544.1.12.43.1.1.1.5	SecondaryState	read-only	This object represents the Secondary State of the Flow Point.
NUM f3AccFlowPointAssociatedFlowId	1.3.6.1.4.1.2544.1.12.43.1.1.1.6	VariablePointer	read-only	This object provides the association of an Flow with an Flow Point.
T/F f3AccFlowPointIngressMultiCOSEnabled	1.3.6.1.4.1.2544.1.12.43.1.1.1.7	TruthValue	read-create	This object allows specification of ingress multiple COS (Class of Service) Flow Point.
I32 f3AccFlowPointIngressCOS	1.3.6.1.4.1.2544.1.12.43.1.1.1.8	Integer32	read-create	This object allows specification of ingress COS (Class of Service) Flow Point. This attribute has been deprecated and is not supported. The Ingress COS is determined from the flowpoint's associated Priority Mapping Profle.
SHA f3AccFlowPointEgressShapingType	1.3.6.1.4.1.2544.1.12.43.1.1.1.9	ShapingType	read-write	This object allows specification of Shaping Type for Flow Point. For 8.1.1 release, only flow-based Shaping Type is supported.
STR f3AccFlowPointIngressVlanMemberList	1.3.6.1.4.1.2544.1.12.43.1.1.1.10	DisplayString	read-create	It allows specification of VLAN members of the Flow Point. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* or X (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. Once the Flow Point is created, this attribute can only be updated using f3AccFlowPointVlanMemberAction and f3AccFlowPointVlanMemberActionVlan objects.
FLO f3AccFlowPointVlanMemberAction	1.3.6.1.4.1.2544.1.12.43.1.1.1.11	FlowVlanActionType	read-write	This object allows to add or remove the VLAN members specified by f3AccFlowPointVlanMemberActionVlan object. SNMP manager must first configure the VLAN member to be added/removed in the object f3AccFlowPointVlanMemberActionVlan and then should specify f3AccFlowPointVlanMemberAction on whether to add/remove the specified VLAN member.
STR f3AccFlowPointVlanMemberActionVlan	1.3.6.1.4.1.2544.1.12.43.1.1.1.12	DisplayString	read-create	This object allows adding/removing VLAN members to a Flow Point. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. In order to add/remove VLAN member to a flow, user must specify this object with appropriate VLAN and then invoke f3AccFlowPointVlanMemberAction.
T/F f3AccFlowPointIngressUntaggedFrameEnabled	1.3.6.1.4.1.2544.1.12.43.1.1.1.13	TruthValue	read-create	This object allows to specify whether or not the Flow Point supports untagged frame.
FLO f3AccFlowPointCTagControl	1.3.6.1.4.1.2544.1.12.43.1.1.1.14	FlowTagControl	read-create	This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (f3AccFlowPointCTagVlanId) and priority (f3AccFlowPointCTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified f3AccFlowPointCTagVlanId and f3AccFlowPointCTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified f3AccFlowPointCTagVlanId; if the type is 'none', no C-TAG management is performed.
VLA f3AccFlowPointCTagVlanId	1.3.6.1.4.1.2544.1.12.43.1.1.1.15	VlanId	read-create	This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3AccFlowPointIngressCTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.
VLA f3AccFlowPointCTagVlanPriority	1.3.6.1.4.1.2544.1.12.43.1.1.1.16	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3AccFlowPointIngressCTagControl. It is applicable for 'push' and 'swaptag' control types.
FLO f3AccFlowPointSTagControl	1.3.6.1.4.1.2544.1.12.43.1.1.1.17	FlowTagControl	read-create	This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (f3AccFlowPointSTagVlanId) and priority (f3AccFlowPointSTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified f3AccFlowPointSTagVlanId and f3AccFlowPointSTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified f3AccFlowPointSTagVlanId; if the type is 'none', no S-TAG management is performed.
VLA f3AccFlowPointSTagVlanId	1.3.6.1.4.1.2544.1.12.43.1.1.1.18	VlanId	read-create	This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3AccFlowPointIngressSTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.
VLA f3AccFlowPointSTagVlanPriority	1.3.6.1.4.1.2544.1.12.43.1.1.1.19	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3AccFlowPointIngressSTagControl. It is applicable for 'push' and 'swaptag' control types.
T/F f3AccFlowPointEgressOuterTagPrioMapEnabled	1.3.6.1.4.1.2544.1.12.43.1.1.1.20	TruthValue	read-create	This object defines whether to use the Egress Prio Mapping to swap the priority of outer tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled,the EgressPrioMapTable operations are ignored for specified Flow COS.
T/F f3AccFlowPointEgressInnerTagPrioMapEnabled	1.3.6.1.4.1.2544.1.12.43.1.1.1.21	TruthValue	read-create	This object defines whether to use the Egress Prio Mapping to swap the priority of inner tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled, the EgressPrioMapTable operations are ignored for specified Flow COS.
I32 f3AccFlowPointSESFramesLossThresholdRatio	1.3.6.1.4.1.2544.1.12.43.1.1.1.22	Integer32	read-create	This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the flowpoint. This functionality is applicable if the flowpoint is monitored using the Y.1731 ESA functionality.
T/F f3AccFlowPointDefaultMemberEnabled	1.3.6.1.4.1.2544.1.12.43.1.1.1.23	TruthValue	read-create	Truth Value means that on this FP, the membership is all the tag packets without match any other membership associated to the port. Untagged means untagged flow. Default only care tagged flow.
T/F f3AccFlowPointMcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.43.1.1.1.24	TruthValue	read-create	Whether multicast packets need be limited per FP.
U32 f3AccFlowPointMcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.43.1.1.1.25	Unsigned32	read-create	The rate limiting for multicast packets per FP. When f3AccFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 f3AccFlowPointMcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.43.1.1.1.26	Unsigned32	read-create	The rate limiting for multicast packets per FP. When f3AccFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
T/F f3AccFlowPointBcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.43.1.1.1.27	TruthValue	read-create	Whether broadcast packets need be limited per FP.
U32 f3AccFlowPointBcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.43.1.1.1.28	Unsigned32	read-create	The rate limiting for broadcast packets per FP. When f3AccFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 f3AccFlowPointBcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.43.1.1.1.29	Unsigned32	read-create	The rate limiting for broadcast packets per FP. When f3AccFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
T/F f3AccFlowPointCombinedRateLimitEnabled	1.3.6.1.4.1.2544.1.12.43.1.1.1.30	TruthValue	read-create	Whether broadcast and multicast packets need be limited per FP.
U32 f3AccFlowPointCombinedRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.43.1.1.1.31	Unsigned32	read-create	The rate limiting for broadcast and multicast packets per FP. When f3AccFlowPointCombinedRateLimitEnabled is true and the value is 0, it means all broadcast and multicast frame are dropped. This object only represents low 32 bits.
U32 f3AccFlowPointCombinedRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.43.1.1.1.32	Unsigned32	read-create	The rate limiting for broadcast and multicast packets per FP. When f3AccFlowPointCombinedRateLimitEnabled is true and the value is 0, it means all broadcast and multicast frame are dropped. This object only represents high 32 bits.
NUM f3AccFlowPointSplitHorizonGroupOID	1.3.6.1.4.1.2544.1.12.43.1.1.1.33	VariablePointer	read-create	Specifies the Split-Horizon Group OID. If there is no SHG, the value is none.
NUM f3AccFlowPointLoopAvoidance	1.3.6.1.4.1.2544.1.12.43.1.1.1.34	VariablePointer	read-create	EID of this associated Loop Avoidance protocol entity. A value of NONE indicates there is no loop avoidance protocol. Currently ERP EID is filled when ELAN service is created.
T/F f3AccFlowPointHierarchicalCOSEnabled	1.3.6.1.4.1.2544.1.12.43.1.1.1.35	TruthValue	read-create	Enable or Disable Hierarchical COS shaping (flow shaping).
U32 f3AccFlowPointMaximumBWLo	1.3.6.1.4.1.2544.1.12.43.1.1.1.36	Unsigned32	read-create	This attribute description the Flow Point maximum bandwidth. This object only represents low 32 bits.
U32 f3AccFlowPointMaximumBWHi	1.3.6.1.4.1.2544.1.12.43.1.1.1.37	Unsigned32	read-create	This attribute description the Flow Point maximum bandwidth. This object only represents high 32 bits.
U32 f3AccFlowPointGuaranteedBWLo	1.3.6.1.4.1.2544.1.12.43.1.1.1.38	Unsigned32	read-create	This attribute description the Flow Point guaranteed bandwidth. This object only represents low 32 bits.
U32 f3AccFlowPointGuaranteedBWHi	1.3.6.1.4.1.2544.1.12.43.1.1.1.39	Unsigned32	read-create	This attribute description the Flow Point guaranteed bandwidth. This objects only represents high 32 bits.
T/F f3AccFlowPointAutoBandwidthConfigEnabled	1.3.6.1.4.1.2544.1.12.43.1.1.1.40	TruthValue	read-create	This object specifies the shaper bandwidth is automatically adjusted by the system. For a single COS Flow Point, the shaper EIR bandwidth is set to the maximum port bandwidth; the shaper CIR is set to the available port bandwidth multiplied by the value of the f3AccFlowPointAutoCIRPercentage object. For a Hierarchical-COS Flow Point, the f3AccFlowPointMaximumBWLo and f3AccFlowPointMaximumBWHi are set to the maximum port bandwidth; the f3AccFlowPointGuaranteedBWLo and f3AccFlowPointGuaranteedBWHi are set to the available port bandwidth multiplied by the value of the f3AccFlowPointAutoCIRPercentage object. The value of this object must be FALSE when f3AccFlowPointIngressMultiCOSEnabled is TRUE and f3AccFlowPointHierarchicalCOSEnabled is FALSE.
I32 f3AccFlowPointAutoCIRPercentage	1.3.6.1.4.1.2544.1.12.43.1.1.1.41	Integer32	read-create	This object specifies the percentage of available shaper CIR to be assigned to this Flow Point when f3AccFlowPointAutoBandwidthConfigEnabled is TRUE.
T/F f3AccFlowPointFrameFwdEnabled	1.3.6.1.4.1.2544.1.12.43.1.1.1.42	TruthValue	read-create	When enabled Flow Point will forward frames it receives. When disabled, the Flow Point will not forward frames it receives.
STO f3AccFlowPointStorageType	1.3.6.1.4.1.2544.1.12.43.1.1.1.43	StorageType	read-create	The type of storage configured for this entry.
ROW f3AccFlowPointRowStatus	1.3.6.1.4.1.2544.1.12.43.1.1.1.44	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3AccFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3AccFlowPointRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3AccFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1).
T/F f3AccFlowPointUsePortPrioMapProfile	1.3.6.1.4.1.2544.1.12.43.1.1.1.45	TruthValue	read-write	This indicates whether the flow point is using, if true, the port's Priority Mapping Profile or, if false, is using its own Priority Mapping Profile.
NUM f3AccFlowPointRefPrioMapProfile	1.3.6.1.4.1.2544.1.12.43.1.1.1.46	VariablePointer	read-write	This object allows to set priority map profile.
NUM f3AccFlowpointRefConnectGuardFlowObject	1.3.6.1.4.1.2544.1.12.43.1.1.1.47	VariablePointer	read-write	This object specifies Mac Sec flow object OID.
T/F f3AccFlowpointSecureBlockingControl	1.3.6.1.4.1.2544.1.12.43.1.1.1.48	TruthValue	read-write	This object can be used to enable/disable secure block.
FLO f3AccFlowpointSecureState	1.3.6.1.4.1.2544.1.12.43.1.1.1.49	FlowSecState	read-only	This object specifies the secure state of this flow.
f3AccFpQosShaperTable	1.3.6.1.4.1.2544.1.12.43.1.2		not-accessible	A list of entries corresponding to Access Flow Point Quality of Service Shaper for configuration purposes.
f3AccFpQosShaperEntry	1.3.6.1.4.1.2544.1.12.43.1.2.1		not-accessible	A conceptual row in the f3AccFpQosShaperTable. These entries represent an Access Flow Point Quality of Service Shaper.
I32 f3AccFpQosShaperIndex	1.3.6.1.4.1.2544.1.12.43.1.2.1.1	Integer32	not-accessible	The unique integer index value corresponding to a Quality of Service Shaper.
ADM f3AccFpQosShaperAdminState	1.3.6.1.4.1.2544.1.12.43.1.2.1.2	AdminState	read-create	This object represents the Administrative State of a Shaper.
OPE f3AccFpQosShaperOperationalState	1.3.6.1.4.1.2544.1.12.43.1.2.1.3	OperationalState	read-only	This object represents the Operational State of a Shaper.
SEC f3AccFpQosShaperSecondaryState	1.3.6.1.4.1.2544.1.12.43.1.2.1.4	SecondaryState	read-only	This object represents the Secondary State of the Shaper.
U32 f3AccFpQosShaperCIRLo	1.3.6.1.4.1.2544.1.12.43.1.2.1.5	Unsigned32	read-create	This object represents the Commited Information Rate (CIR) (Lower 32 bits) of the Shaper.
U32 f3AccFpQosShaperCIRHi	1.3.6.1.4.1.2544.1.12.43.1.2.1.6	Unsigned32	read-create	This object represents the Commited Information Rate (CIR) (Higher 32 bits) of the Shaper.
U32 f3AccFpQosShaperEIRLo	1.3.6.1.4.1.2544.1.12.43.1.2.1.7	Unsigned32	read-create	This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Shaper.
U32 f3AccFpQosShaperEIRHi	1.3.6.1.4.1.2544.1.12.43.1.2.1.8	Unsigned32	read-create	This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Shaper.
U32 f3AccFpQosShaperCBS	1.3.6.1.4.1.2544.1.12.43.1.2.1.9	Unsigned32	read-create	This object represents the Commited Burst Size (CBS) of a Shaper.
U32 f3AccFpQosShaperEBS	1.3.6.1.4.1.2544.1.12.43.1.2.1.10	Unsigned32	read-create	This object represents the Excess Burst Size (EBS) of a Shaper.
U32 f3AccFpQosShaperBufferSize	1.3.6.1.4.1.2544.1.12.43.1.2.1.11	Unsigned32	read-create	This object represents the Buffer Size of the Shaper.
I32 f3AccFpQosShaperCOS	1.3.6.1.4.1.2544.1.12.43.1.2.1.12	Integer32	read-only	This object provides the COS (Class of Service) value for the QOS Shaper.
STO f3AccFpQosShaperStorageType	1.3.6.1.4.1.2544.1.12.43.1.2.1.13	StorageType	read-create	The type of storage configured for this entry.
ROW f3AccFpQosShaperRowStatus	1.3.6.1.4.1.2544.1.12.43.1.2.1.14	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3AccFpQosShaperRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3AccFpQosShaperRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3AccFpQosShaperRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3AccFpQosPolicerTable	1.3.6.1.4.1.2544.1.12.43.1.3		not-accessible	A list of entries corresponding to Access Flow Point Quality of Service Policer for configuration purposes.
f3AccFpQosPolicerEntry	1.3.6.1.4.1.2544.1.12.43.1.3.1		not-accessible	A conceptual row in the f3AccFpQosPolicerTable. These entries represent an Access Flow Point Quality of Service Policer.
I32 f3AccFpQosPolicerIndex	1.3.6.1.4.1.2544.1.12.43.1.3.1.1	Integer32	not-accessible	The unique integer index value corresponding to a Quality of Service Policer. The Policer Index represents the COS level. This is applicable in case of a Multi COS Flow Point. Index 1 represents COS 0; Index 2 represents COS 1 and so on.
ADM f3AccFpQosPolicerAdminState	1.3.6.1.4.1.2544.1.12.43.1.3.1.2	AdminState	read-create	This object represents the Administrative State of a Policer.
OPE f3AccFpQosPolicerOperationalState	1.3.6.1.4.1.2544.1.12.43.1.3.1.3	OperationalState	read-only	This object represents the Operational State of a Policer.
SEC f3AccFpQosPolicerSecondaryState	1.3.6.1.4.1.2544.1.12.43.1.3.1.4	SecondaryState	read-only	This object represents the Secondary State of a Policer.
U32 f3AccFpQosPolicerCIRLo	1.3.6.1.4.1.2544.1.12.43.1.3.1.5	Unsigned32	read-create	This object represents the Commited Information Rate (CIR) (Lower 32 bits) of the Policer.
U32 f3AccFpQosPolicerCIRHi	1.3.6.1.4.1.2544.1.12.43.1.3.1.6	Unsigned32	read-create	This object represents the Commited Information Rate (CIR) (Higher 32 bits) of the Policer.
U32 f3AccFpQosPolicerEIRLo	1.3.6.1.4.1.2544.1.12.43.1.3.1.7	Unsigned32	read-create	This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Policer.
U32 f3AccFpQosPolicerEIRHi	1.3.6.1.4.1.2544.1.12.43.1.3.1.8	Unsigned32	read-create	This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Policer.
I32 f3AccFpQosPolicerCBS	1.3.6.1.4.1.2544.1.12.43.1.3.1.9	Integer32	read-create	This object represents the Commited Burst Size (CBS) of a Policer.
I32 f3AccFpQosPolicerEBS	1.3.6.1.4.1.2544.1.12.43.1.3.1.10	Integer32	read-create	This object represents the Excess Burst Size (EBS) of a Policer.
POL f3AccFpQosPolicerAlgorithm	1.3.6.1.4.1.2544.1.12.43.1.3.1.11	PolicerAlgorithmType	read-only	This object represents Policer algorithm as 'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate Triple Color Marking).
POL f3AccFpQosPolicerColorMode	1.3.6.1.4.1.2544.1.12.43.1.3.1.12	PolicerColorMode	read-create	This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'.
T/F f3AccFpQosPolicerCouplingFlag	1.3.6.1.4.1.2544.1.12.43.1.3.1.13	TruthValue	read-create	This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level.
T/F f3AccFpQosPolicerPolicingEnabled	1.3.6.1.4.1.2544.1.12.43.1.3.1.14	TruthValue	read-create	This object allows specification of Policer Policing. When Policing is disabled, traffic policing is bypassed. When Policing is enabled, traffic policing is applied.
STO f3AccFpQosPolicerStorageType	1.3.6.1.4.1.2544.1.12.43.1.3.1.15	StorageType	read-create	The type of storage configured for this entry.
ROW f3AccFpQosPolicerRowStatus	1.3.6.1.4.1.2544.1.12.43.1.3.1.16	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3AccFpQosPolicerRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3AccFpQosPolicerRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3AccFpQosPolicerRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3MPFlowExtTable	1.3.6.1.4.1.2544.1.12.43.1.4		not-accessible	This table extends cmMPFlowTable to provide configuration of maximum forwarding table size.
f3MPFlowExtEntry	1.3.6.1.4.1.2544.1.12.43.1.4.1		not-accessible	A conceptual row in the f3MPFlowExtTable.
I32 f3MPFlowExtMaxFwdEntries	1.3.6.1.4.1.2544.1.12.43.1.4.1.1	Integer32	read-write	This object allows configuring the maximum number of Forwarding Entires for Forwarding Table of this MP Flow.
NUM f3MPFlowRefConnectGuardFlowObject	1.3.6.1.4.1.2544.1.12.43.1.4.1.2	VariablePointer	read-write	This object specifies Mac Sec flow object OID.
FLO f3MPFlowSecureState	1.3.6.1.4.1.2544.1.12.43.1.4.1.3	FlowSecState	read-only	This object specifies the secure state of the macsec flow.
f3AccFlowPointCpdV2Table	1.3.6.1.4.1.2544.1.12.43.1.5		not-accessible	A list of entries corresponding to Access Flow Point Control Protocol Disposition V2.
f3AccFlowPointCpdV2Entry	1.3.6.1.4.1.2544.1.12.43.1.5.1		not-accessible	A conceptual row in the f3AccFlowPointCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Access Flow Point.
I32 f3AccFlowPointCpdV2Index	1.3.6.1.4.1.2544.1.12.43.1.5.1.1	Integer32	not-accessible	Unique Index value to access the CPD row.
CMC f3AccFlowPointCpdV2IslDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.2	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC f3AccFlowPointCpdV2PagpDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.3	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC f3AccFlowPointCpdV2UdldDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC f3AccFlowPointCpdV2CdpDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC f3AccFlowPointCpdV2VtpDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
CMC f3AccFlowPointCpdV2DtpDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC f3AccFlowPointCpdV2PvstpPlusDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
CMC f3AccFlowPointCpdV2UplinkFastDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC f3AccFlowPointCpdV2VlanBridgeDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC f3AccFlowPointCpdV2L2PTDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
CMC f3AccFlowPointCpdV2BPDUDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC f3AccFlowPointCpdV2PauseDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.13	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC f3AccFlowPointCpdV2LACPDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.14	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC f3AccFlowPointCpdV2LACPMarkerDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC f3AccFlowPointCpdV2EfmOamDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC f3AccFlowPointCpdV2SSMDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
CMC f3AccFlowPointCpdV2PortAuthenDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC f3AccFlowPointCpdV2LANBridgesDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC f3AccFlowPointCpdV2GMRPDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC f3AccFlowPointCpdV2GVRPDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.21	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21).
CMC f3AccFlowPointCpdV2GARPDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.22	CmControlProtocolDispType	read-write	Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMA f3AccFlowPointCpdV2ActiveControlProtocols	1.3.6.1.4.1.2544.1.12.43.1.5.1.23	CmActiveControlProtocolsType	read-only	List of Active Control Protocol Dispositions. Note that if the Port Level Disposition control is set to PEER or DISCARD, the flow level disposition is no longer active. This object provides information on all the active dispositions.
CMC f3AccFlowPointCpdV2ELMIDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.24	CmControlProtocolDispType	read-write	ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.
CMC f3AccFlowPointCpdV2Mac00DispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.25	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC f3AccFlowPointCpdV2Mac01DispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.26	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC f3AccFlowPointCpdV2Mac02DispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.27	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC f3AccFlowPointCpdV2Mac03DispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.28	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC f3AccFlowPointCpdV2Mac04DispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.29	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC f3AccFlowPointCpdV2Mac05DispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.30	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC f3AccFlowPointCpdV2Mac06DispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC f3AccFlowPointCpdV2Mac07DispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC f3AccFlowPointCpdV2Mac08DispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC f3AccFlowPointCpdV2Mac09DispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC f3AccFlowPointCpdV2Mac0ADispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC f3AccFlowPointCpdV2Mac0BDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC f3AccFlowPointCpdV2Mac0CDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC f3AccFlowPointCpdV2Mac0DDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC f3AccFlowPointCpdV2Mac0EDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC f3AccFlowPointCpdV2Mac0FDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
CMC f3AccFlowPointCpdV2NearestLLDPDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.41	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.
CMC f3AccFlowPointCpdV2NonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.42	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.
CMC f3AccFlowPointCpdV2CustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.43.1.5.1.43	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.
f3AccFlowPointLearningConfigTable	1.3.6.1.4.1.2544.1.12.43.1.6		not-accessible	This table extends f3AccFlowPointTable to provide parameters for MAC Table control configuration.
f3AccFlowPointLearningConfigEntry	1.3.6.1.4.1.2544.1.12.43.1.6.1		not-accessible	A conceptual row in the f3AccFlowPointLearningConfigTable.
T/F f3AccFlowPointLearningConfigLearningEnabled	1.3.6.1.4.1.2544.1.12.43.1.6.1.1	TruthValue	read-write	This object allows configuring Learning Control on this Flowpoint.
I32 f3AccFlowPointLearningConfigMaxFwdEntries	1.3.6.1.4.1.2544.1.12.43.1.6.1.2	Integer32	read-write	This object allows configuring the maximum number of Forwarding Entries on this Flowpoint.
PRO f3AccFlowPointLearningConfigProtectLearningCtrl	1.3.6.1.4.1.2544.1.12.43.1.6.1.3	ProtectLearningControl	read-write	This object allows configuring Learning Control on this Flowpoint.
FLO f3AccFlowPointLearningConfigAction	1.3.6.1.4.1.2544.1.12.43.1.6.1.4	FlowLearningConfigAction	read-write	This objects allows performing user action on Flow Learning Table.
f3NetFlowPointTable	1.3.6.1.4.1.2544.1.12.43.1.7		not-accessible	A list of entries corresponding to Network Flow Point for configuration purposes.
f3NetFlowPointEntry	1.3.6.1.4.1.2544.1.12.43.1.7.1		not-accessible	A conceptual row in the f3NetFlowPointTable. These entries represent an Network Flow Point. If the Flow Point attached to a lag, the slotIndex should be 255 (255 is used to identify the Flow Point belongs to lag), and the cmEthernetNetPortIndex should be the f3LagIndex.
I32 f3NetFlowPointIndex	1.3.6.1.4.1.2544.1.12.43.1.7.1.1	Integer32	not-accessible	The integer index value corresponding to an Flow Point.
STR f3NetFlowPointAlias	1.3.6.1.4.1.2544.1.12.43.1.7.1.2	DisplayString	read-create	This object allows SNMP management entities to provide a circuit identifier with the Flow Point.
ADM f3NetFlowPointAdminState	1.3.6.1.4.1.2544.1.12.43.1.7.1.3	AdminState	read-create	This object represents the Administrative State of the Flow Point.
OPE f3NetFlowPointOperationalState	1.3.6.1.4.1.2544.1.12.43.1.7.1.4	OperationalState	read-only	This object represents the Operational State of the Flow Point.
SEC f3NetFlowPointSecondaryState	1.3.6.1.4.1.2544.1.12.43.1.7.1.5	SecondaryState	read-only	This object represents the Secondary State of the Flow Point.
NUM f3NetFlowPointAssociatedFlowId	1.3.6.1.4.1.2544.1.12.43.1.7.1.6	VariablePointer	read-only	This object provides the association of an Flow with an Flow Point.
T/F f3NetFlowPointIngressMultiCOSEnabled	1.3.6.1.4.1.2544.1.12.43.1.7.1.7	TruthValue	read-create	This object allows specification of ingress multiple COS (Class of Service) Flow Point.
I32 f3NetFlowPointIngressCOS	1.3.6.1.4.1.2544.1.12.43.1.7.1.8	Integer32	read-create	This object allows specification of ingress COS (Class of Service) Flow Point. This attribute has been deprecated and is not supported. The Ingress COS is determined from the flowpoint's associated Priority Mapping Profle.
SHA f3NetFlowPointEgressShapingType	1.3.6.1.4.1.2544.1.12.43.1.7.1.9	ShapingType	read-write	This object allows specification of Shaping Type for Flow Point. For 8.1.1 release, only flow-based Shaping Type is supported.
STR f3NetFlowPointIngressVlanMemberList	1.3.6.1.4.1.2544.1.12.43.1.7.1.10	DisplayString	read-create	It allows specification of VLAN members of the Flow Point. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* or X (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. Once the Flow Point is created, this attribute can only be updated using f3NetFlowPointVlanMemberAction and f3NetFlowPointVlanMemberActionVlan objects.
FLO f3NetFlowPointVlanMemberAction	1.3.6.1.4.1.2544.1.12.43.1.7.1.11	FlowVlanActionType	read-write	This object allows to add or remove the VLAN members specified by f3NetFlowPointVlanMemberActionVlan object. SNMP manager must first configure the VLAN member to be added/removed in the object f3NetFlowPointVlanMemberActionVlan and then should specify f3NetFlowPointVlanMemberAction on whether to add/remove the specified VLAN member.
STR f3NetFlowPointVlanMemberActionVlan	1.3.6.1.4.1.2544.1.12.43.1.7.1.12	DisplayString	read-create	This object allows adding/removing VLAN members to a Flow Point. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. In order to add/remove VLAN member to a flow, user must specify this object with appropriate VLAN and then invoke f3NetFlowPointVlanMemberAction.
T/F f3NetFlowPointIngressUntaggedFrameEnabled	1.3.6.1.4.1.2544.1.12.43.1.7.1.13	TruthValue	read-create	This object allows to specify whether or not the Flow Point supports untagged frame.
FLO f3NetFlowPointCTagControl	1.3.6.1.4.1.2544.1.12.43.1.7.1.14	FlowTagControl	read-create	This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (f3NetFlowPointCTagVlanId) and priority (f3NetFlowPointCTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified f3NetFlowPointCTagVlanId and f3NetFlowPointCTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified f3NetFlowPointCTagVlanId; if the type is 'none', no C-TAG management is performed.
VLA f3NetFlowPointCTagVlanId	1.3.6.1.4.1.2544.1.12.43.1.7.1.15	VlanId	read-create	This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3NetFlowPointIngressCTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.
VLA f3NetFlowPointCTagVlanPriority	1.3.6.1.4.1.2544.1.12.43.1.7.1.16	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3NetFlowPointIngressCTagControl. It is applicable for 'push' and 'swaptag' control types.
FLO f3NetFlowPointSTagControl	1.3.6.1.4.1.2544.1.12.43.1.7.1.17	FlowTagControl	read-create	This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (f3NetFlowPointSTagVlanId) and priority (f3NetFlowPointSTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified f3NetFlowPointSTagVlanId and f3NetFlowPointSTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified f3NetFlowPointSTagVlanId; if the type is 'none', no S-TAG management is performed.
VLA f3NetFlowPointSTagVlanId	1.3.6.1.4.1.2544.1.12.43.1.7.1.18	VlanId	read-create	This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3NetFlowPointIngressSTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.
VLA f3NetFlowPointSTagVlanPriority	1.3.6.1.4.1.2544.1.12.43.1.7.1.19	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3NetFlowPointIngressSTagControl. It is applicable for 'push' and 'swaptag' control types.
T/F f3NetFlowPointEgressOuterTagPrioMapEnabled	1.3.6.1.4.1.2544.1.12.43.1.7.1.20	TruthValue	read-create	This object defines whether to use the Egress Prio Mapping to swap the priority of outer tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled,the EgressPrioMapTable operations are ignored for specified Flow COS.
T/F f3NetFlowPointEgressInnerTagPrioMapEnabled	1.3.6.1.4.1.2544.1.12.43.1.7.1.21	TruthValue	read-create	This object defines whether to use the Egress Prio Mapping to swap the priority of inner tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled, the EgressPrioMapTable operations are ignored for specified Flow COS.
I32 f3NetFlowPointSESFramesLossThresholdRatio	1.3.6.1.4.1.2544.1.12.43.1.7.1.22	Integer32	read-create	This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the flowpoint. This functionality is applicable if the flowpoint is monitored using the Y.1731 ESA functionality.
T/F f3NetFlowPointDefaultMemberEnabled	1.3.6.1.4.1.2544.1.12.43.1.7.1.23	TruthValue	read-create	Truth Value means that on this FP, the membership is all the tag packets without match any other membership associated to the port. Untagged means untagged flow. Default only care tagged flow.
T/F f3NetFlowPointMcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.43.1.7.1.24	TruthValue	read-create	Whether multicast packets need be limited per FP.
U32 f3NetFlowPointMcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.43.1.7.1.25	Unsigned32	read-create	The rate limiting for multicast packets per FP. When f3NetFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 f3NetFlowPointMcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.43.1.7.1.26	Unsigned32	read-create	The rate limiting for multicast packets per FP. When f3NetFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
T/F f3NetFlowPointBcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.43.1.7.1.27	TruthValue	read-create	Whether broadcast packets need be limited per FP.
U32 f3NetFlowPointBcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.43.1.7.1.28	Unsigned32	read-create	The rate limiting for broadcast packets per FP. When f3NetFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 f3NetFlowPointBcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.43.1.7.1.29	Unsigned32	read-create	The rate limiting for broadcast packets per FP. When f3NetFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
T/F f3NetFlowPointCombinedRateLimitEnabled	1.3.6.1.4.1.2544.1.12.43.1.7.1.30	TruthValue	read-create	Whether broadcast and multicast packets need be limited per FP.
U32 f3NetFlowPointCombinedRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.43.1.7.1.31	Unsigned32	read-create	The rate limiting for broadcast and multicast packets per FP. When f3NetFlowPointCombinedRateLimitEnabled is true and the value is 0, it means all broadcast and multicast frame are dropped. This object only represents low 32 bits.
U32 f3NetFlowPointCombinedRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.43.1.7.1.32	Unsigned32	read-create	The rate limiting for broadcast and multicast packets per FP. When f3NetFlowPointCombinedRateLimitEnabled is true and the value is 0, it means all broadcast and multicast frame are dropped. This object only represents high 32 bits.
NUM f3NetFlowPointSplitHorizonGroupOID	1.3.6.1.4.1.2544.1.12.43.1.7.1.33	VariablePointer	read-create	Specifies the Split-Horizon Group OID. If there is no SHG, the value is none.
NUM f3NetFlowPointLoopAvoidance	1.3.6.1.4.1.2544.1.12.43.1.7.1.34	VariablePointer	read-create	EID of this associated Loop Avoidance protocol entity. A value of NONE indicates there is no loop avoidance protocol. Currently ERP EID is filled when ELAN service is created.
T/F f3NetFlowPointHierarchicalCOSEnabled	1.3.6.1.4.1.2544.1.12.43.1.7.1.35	TruthValue	read-create	Enable or Disable Hierarchical COS shaping (flow shaping).
U32 f3NetFlowPointMaximumBWLo	1.3.6.1.4.1.2544.1.12.43.1.7.1.36	Unsigned32	read-create	This attribute description the Flow Point maximum bandwidth. This object only represents low 32 bits.
U32 f3NetFlowPointMaximumBWHi	1.3.6.1.4.1.2544.1.12.43.1.7.1.37	Unsigned32	read-create	This attribute description the Flow Point maximum bandwidth. This object only represents high 32 bits.
U32 f3NetFlowPointGuaranteedBWLo	1.3.6.1.4.1.2544.1.12.43.1.7.1.38	Unsigned32	read-create	This attribute description the Flow Point guaranteed bandwidth. This object only represents low 32 bits.
U32 f3NetFlowPointGuaranteedBWHi	1.3.6.1.4.1.2544.1.12.43.1.7.1.39	Unsigned32	read-create	This attribute description the Flow Point guaranteed bandwidth. This objects only represents high 32 bits.
T/F f3NetFlowPointAutoBandwidthConfigEnabled	1.3.6.1.4.1.2544.1.12.43.1.7.1.40	TruthValue	read-create	This object specifies the shaper bandwidth is automatically adjusted by the system. For a single COS Flow Point, the shaper EIR bandwidth is set to the maximum port bandwidth; the shaper CIR is set to the available port bandwidth multiplied by the value of the f3NetFlowPointAutoCIRPercentage object. For a Hierarchical-COS Flow Point, the f3NetFlowPointMaximumBWLo and f3NetFlowPointMaximumBWHi are set to the maximum port bandwidth; the f3NetFlowPointGuaranteedBWLo and f3NetFlowPointGuaranteedBWHi are set to the available port bandwidth multiplied by the value of the f3NetFlowPointAutoCIRPercentage object. The value of this object must be FALSE when f3NetFlowPointIngressMultiCOSEnabled is TRUE and f3NetFlowPointHierarchicalCOSEnabled is FALSE.
I32 f3NetFlowPointAutoCIRPercentage	1.3.6.1.4.1.2544.1.12.43.1.7.1.41	Integer32	read-create	This object specifies the percentage of available shaper CIR to be assigned to this Flow Point when f3NetFlowPointAutoBandwidthConfigEnabled is TRUE.
T/F f3NetFlowPointFrameFwdEnabled	1.3.6.1.4.1.2544.1.12.43.1.7.1.42	TruthValue	read-create	When enabled Flow Point will forward frames it receives. When disabled, the Flow Point will not forward frames it receives.
STO f3NetFlowPointStorageType	1.3.6.1.4.1.2544.1.12.43.1.7.1.43	StorageType	read-create	The type of storage configured for this entry.
ROW f3NetFlowPointRowStatus	1.3.6.1.4.1.2544.1.12.43.1.7.1.44	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3NetFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3NetFlowPointRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3NetFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1).
T/F f3NetFlowPointUsePortPrioMapProfile	1.3.6.1.4.1.2544.1.12.43.1.7.1.45	TruthValue	read-write	This indicates whether the flow point is using, if true, the port's Priority Mapping Profile or, if false, is using its own Priority Mapping Profile.
NUM f3NetFlowPointRefPrioMapProfile	1.3.6.1.4.1.2544.1.12.43.1.7.1.46	VariablePointer	read-write	This object allows to set priority map profile.
NUM f3NetFlowpointRefConnectGuardFlowObject	1.3.6.1.4.1.2544.1.12.43.1.7.1.47	VariablePointer	read-write	This object specifies Mac Sec flow object OID.
T/F f3NetFlowpointSecureBlockingControl	1.3.6.1.4.1.2544.1.12.43.1.7.1.48	TruthValue	read-write	This object can be used to enable/disable secure block.
FLO f3NetFlowpointSecureState	1.3.6.1.4.1.2544.1.12.43.1.7.1.49	FlowSecState	read-only	This object specifies the secure state of this flow.
f3NetFpQosShaperTable	1.3.6.1.4.1.2544.1.12.43.1.8		not-accessible	A list of entries corresponding to Net Flow Point Quality of Service Shaper for configuration purposes.
f3NetFpQosShaperEntry	1.3.6.1.4.1.2544.1.12.43.1.8.1		not-accessible	A conceptual row in the f3NetFpQosShaperTable. These entries represent an Net Flow Point Quality of Service Shaper.
I32 f3NetFpQosShaperIndex	1.3.6.1.4.1.2544.1.12.43.1.8.1.1	Integer32	not-accessible	The unique integer index value corresponding to a Quality of Service Shaper.
ADM f3NetFpQosShaperAdminState	1.3.6.1.4.1.2544.1.12.43.1.8.1.2	AdminState	read-create	This object represents the Administrative State of a Shaper.
OPE f3NetFpQosShaperOperationalState	1.3.6.1.4.1.2544.1.12.43.1.8.1.3	OperationalState	read-only	This object represents the Operational State of a Shaper.
SEC f3NetFpQosShaperSecondaryState	1.3.6.1.4.1.2544.1.12.43.1.8.1.4	SecondaryState	read-only	This object represents the Secondary State of the Shaper.
U32 f3NetFpQosShaperCIRLo	1.3.6.1.4.1.2544.1.12.43.1.8.1.5	Unsigned32	read-create	This object represents the Commited Information Rate (CIR) (Lower 32 bits) of the Shaper.
U32 f3NetFpQosShaperCIRHi	1.3.6.1.4.1.2544.1.12.43.1.8.1.6	Unsigned32	read-create	This object represents the Commited Information Rate (CIR) (Higher 32 bits) of the Shaper.
U32 f3NetFpQosShaperEIRLo	1.3.6.1.4.1.2544.1.12.43.1.8.1.7	Unsigned32	read-create	This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Shaper.
U32 f3NetFpQosShaperEIRHi	1.3.6.1.4.1.2544.1.12.43.1.8.1.8	Unsigned32	read-create	This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Shaper.
U32 f3NetFpQosShaperCBS	1.3.6.1.4.1.2544.1.12.43.1.8.1.9	Unsigned32	read-create	This object represents the Commited Burst Size (CBS) of a Shaper.
U32 f3NetFpQosShaperEBS	1.3.6.1.4.1.2544.1.12.43.1.8.1.10	Unsigned32	read-create	This object represents the Excess Burst Size (EBS) of a Shaper.
U32 f3NetFpQosShaperBufferSize	1.3.6.1.4.1.2544.1.12.43.1.8.1.11	Unsigned32	read-create	This object represents the Buffer Size of the Shaper.
I32 f3NetFpQosShaperCOS	1.3.6.1.4.1.2544.1.12.43.1.8.1.12	Integer32	read-only	This object provides the COS (Class of Service) value for the QOS Shaper.
STO f3NetFpQosShaperStorageType	1.3.6.1.4.1.2544.1.12.43.1.8.1.13	StorageType	read-create	The type of storage configured for this entry.
ROW f3NetFpQosShaperRowStatus	1.3.6.1.4.1.2544.1.12.43.1.8.1.14	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3NetFpQosShaperRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3NetFpQosShaperRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3NetFpQosShaperRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3NetFpQosPolicerTable	1.3.6.1.4.1.2544.1.12.43.1.9		not-accessible	A list of entries corresponding to Net Flow Point Quality of Service Policer for configuration purposes.
f3NetFpQosPolicerEntry	1.3.6.1.4.1.2544.1.12.43.1.9.1		not-accessible	A conceptual row in the f3NetFpQosPolicerTable. These entries represent an Net Flow Point Quality of Service Policer.
I32 f3NetFpQosPolicerIndex	1.3.6.1.4.1.2544.1.12.43.1.9.1.1	Integer32	not-accessible	The unique integer index value corresponding to a Quality of Service Policer. The Policer Index represents the COS level. This is applicable in case of a Multi COS Flow Point. Index 1 represents COS 0; Index 2 represents COS 1 and so on.
ADM f3NetFpQosPolicerAdminState	1.3.6.1.4.1.2544.1.12.43.1.9.1.2	AdminState	read-create	This object represents the Administrative State of a Policer.
OPE f3NetFpQosPolicerOperationalState	1.3.6.1.4.1.2544.1.12.43.1.9.1.3	OperationalState	read-only	This object represents the Operational State of a Policer.
SEC f3NetFpQosPolicerSecondaryState	1.3.6.1.4.1.2544.1.12.43.1.9.1.4	SecondaryState	read-only	This object represents the Secondary State of a Policer.
U32 f3NetFpQosPolicerCIRLo	1.3.6.1.4.1.2544.1.12.43.1.9.1.5	Unsigned32	read-create	This object represents the Commited Information Rate (CIR) (Lower 32 bits) of the Policer.
U32 f3NetFpQosPolicerCIRHi	1.3.6.1.4.1.2544.1.12.43.1.9.1.6	Unsigned32	read-create	This object represents the Commited Information Rate (CIR) (Higher 32 bits) of the Policer.
U32 f3NetFpQosPolicerEIRLo	1.3.6.1.4.1.2544.1.12.43.1.9.1.7	Unsigned32	read-create	This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Policer.
U32 f3NetFpQosPolicerEIRHi	1.3.6.1.4.1.2544.1.12.43.1.9.1.8	Unsigned32	read-create	This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Policer.
I32 f3NetFpQosPolicerCBS	1.3.6.1.4.1.2544.1.12.43.1.9.1.9	Integer32	read-create	This object represents the Commited Burst Size (CBS) of a Policer.
I32 f3NetFpQosPolicerEBS	1.3.6.1.4.1.2544.1.12.43.1.9.1.10	Integer32	read-create	This object represents the Excess Burst Size (EBS) of a Policer.
POL f3NetFpQosPolicerAlgorithm	1.3.6.1.4.1.2544.1.12.43.1.9.1.11	PolicerAlgorithmType	read-only	This object represents Policer algorithm as 'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate Triple Color Marking).
POL f3NetFpQosPolicerColorMode	1.3.6.1.4.1.2544.1.12.43.1.9.1.12	PolicerColorMode	read-create	This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'.
T/F f3NetFpQosPolicerCouplingFlag	1.3.6.1.4.1.2544.1.12.43.1.9.1.13	TruthValue	read-create	This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level.
T/F f3NetFpQosPolicerPolicingEnabled	1.3.6.1.4.1.2544.1.12.43.1.9.1.14	TruthValue	read-create	This object allows specification of Policer Policing. When Policing is disabled, traffic policing is bypassed. When Policing is enabled, traffic policing is applied.
STO f3NetFpQosPolicerStorageType	1.3.6.1.4.1.2544.1.12.43.1.9.1.15	StorageType	read-create	The type of storage configured for this entry.
ROW f3NetFpQosPolicerRowStatus	1.3.6.1.4.1.2544.1.12.43.1.9.1.16	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3NetFpQosPolicerRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3NetFpQosPolicerRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3NetFpQosPolicerRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3NetFlowPointCpdV2Table	1.3.6.1.4.1.2544.1.12.43.1.10		not-accessible	A list of entries corresponding to Net Flow Point Control Protocol Disposition V2.
f3NetFlowPointCpdV2Entry	1.3.6.1.4.1.2544.1.12.43.1.10.1		not-accessible	A conceptual row in the f3NetFlowPointCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Net Flow Point.
I32 f3NetFlowPointCpdV2Index	1.3.6.1.4.1.2544.1.12.43.1.10.1.1	Integer32	not-accessible	Unique Index value to access the CPD row.
CMC f3NetFlowPointCpdV2IslDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.2	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC f3NetFlowPointCpdV2PagpDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.3	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC f3NetFlowPointCpdV2UdldDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC f3NetFlowPointCpdV2CdpDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC f3NetFlowPointCpdV2VtpDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
CMC f3NetFlowPointCpdV2DtpDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC f3NetFlowPointCpdV2PvstpPlusDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
CMC f3NetFlowPointCpdV2UplinkFastDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC f3NetFlowPointCpdV2VlanBridgeDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC f3NetFlowPointCpdV2L2PTDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
CMC f3NetFlowPointCpdV2BPDUDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC f3NetFlowPointCpdV2PauseDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.13	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC f3NetFlowPointCpdV2LACPDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.14	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC f3NetFlowPointCpdV2LACPMarkerDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC f3NetFlowPointCpdV2EfmOamDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC f3NetFlowPointCpdV2SSMDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
CMC f3NetFlowPointCpdV2PortAuthenDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC f3NetFlowPointCpdV2LANBridgesDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC f3NetFlowPointCpdV2GMRPDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC f3NetFlowPointCpdV2GVRPDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.21	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21).
CMC f3NetFlowPointCpdV2GARPDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.22	CmControlProtocolDispType	read-write	Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMA f3NetFlowPointCpdV2ActiveControlProtocols	1.3.6.1.4.1.2544.1.12.43.1.10.1.23	CmActiveControlProtocolsType	read-only	List of Active Control Protocol Dispositions. Note that if the Port Level Disposition control is set to PEER or DISCARD, the flow level disposition is no longer active. This object provides information on all the active dispositions.
CMC f3NetFlowPointCpdV2ELMIDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.24	CmControlProtocolDispType	read-write	ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.
CMC f3NetFlowPointCpdV2Mac00DispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.25	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC f3NetFlowPointCpdV2Mac01DispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.26	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC f3NetFlowPointCpdV2Mac02DispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.27	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC f3NetFlowPointCpdV2Mac03DispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.28	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC f3NetFlowPointCpdV2Mac04DispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.29	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC f3NetFlowPointCpdV2Mac05DispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.30	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC f3NetFlowPointCpdV2Mac06DispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC f3NetFlowPointCpdV2Mac07DispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC f3NetFlowPointCpdV2Mac08DispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC f3NetFlowPointCpdV2Mac09DispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC f3NetFlowPointCpdV2Mac0ADispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC f3NetFlowPointCpdV2Mac0BDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC f3NetFlowPointCpdV2Mac0CDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC f3NetFlowPointCpdV2Mac0DDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC f3NetFlowPointCpdV2Mac0EDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC f3NetFlowPointCpdV2Mac0FDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
CMC f3NetFlowPointCpdV2NearestLLDPDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.41	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.
CMC f3NetFlowPointCpdV2NonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.42	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.
CMC f3NetFlowPointCpdV2CustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.43.1.10.1.43	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.
f3NetFlowPointLearningConfigTable	1.3.6.1.4.1.2544.1.12.43.1.11		not-accessible	This table extends f3NetFlowPointTable to provide parameters for MAC Table control configuration.
f3NetFlowPointLearningConfigEntry	1.3.6.1.4.1.2544.1.12.43.1.11.1		not-accessible	A conceptual row in the f3NetFlowPointLearningConfigTable.
T/F f3NetFlowPointLearningConfigLearningEnabled	1.3.6.1.4.1.2544.1.12.43.1.11.1.1	TruthValue	read-write	This object allows configuring Learning Control on this Flowpoint.
I32 f3NetFlowPointLearningConfigMaxFwdEntries	1.3.6.1.4.1.2544.1.12.43.1.11.1.2	Integer32	read-write	This object allows configuring the maximum number of Forwarding Entries on this Flowpoint.
PRO f3NetFlowPointLearningConfigProtectLearningCtrl	1.3.6.1.4.1.2544.1.12.43.1.11.1.3	ProtectLearningControl	read-write	This object allows configuring Learning Control on this Flowpoint.
FLO f3NetFlowPointLearningConfigAction	1.3.6.1.4.1.2544.1.12.43.1.11.1.4	FlowLearningConfigAction	read-write	This objects allows performing user action on Flow Learning Table.
f3FpmPerfObjects	1.3.6.1.4.1.2544.1.12.43.2
f3AccFlowPointStatsTable	1.3.6.1.4.1.2544.1.12.43.2.1		not-accessible	A collection of FlowPoint statistics. These reflect the current data.
f3AccFlowPointStatsEntry	1.3.6.1.4.1.2544.1.12.43.2.1.1		not-accessible	A conceptual row in the f3AccFlowPointStatsTable. Entries exist in this table for each FlowPoint.
I32 f3AccFlowPointStatsIndex	1.3.6.1.4.1.2544.1.12.43.2.1.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this Access Ethernet Flowpoint statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3 corresponds to rollover.
NUM f3AccFlowPointStatsIntervalType	1.3.6.1.4.1.2544.1.12.43.2.1.1.2	CmPmIntervalType	read-only	Interval over which Performance Monitoring data is collected.
T/F f3AccFlowPointStatsValid	1.3.6.1.4.1.2544.1.12.43.2.1.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3AccFlowPointStatsAction	1.3.6.1.4.1.2544.1.12.43.2.1.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3AccFlowPointStatsL2CPFD	1.3.6.1.4.1.2544.1.12.43.2.1.1.5	PerfCounter64	read-only	Layer 2 Control Protocol Frames Discarded.
NUM f3AccFlowPointStatsABRRx	1.3.6.1.4.1.2544.1.12.43.2.1.1.6	PerfCounter64	read-only	The average bit rate.
NUM f3AccFlowPointStatsABRRLRx	1.3.6.1.4.1.2544.1.12.43.2.1.1.7	PerfCounter64	read-only	The average bit rate, rate limited.
NUM f3AccFlowPointStatsUAS	1.3.6.1.4.1.2544.1.12.43.2.1.1.8	PerfCounter64	read-only	The number of Unavailable Seconds (UAS).
NUM f3AccFlowPointStatsSES	1.3.6.1.4.1.2544.1.12.43.2.1.1.9	PerfCounter64	read-only	The number of Severely Errored Seconds (ES).
NUM f3AccFlowPointStatsFMG	1.3.6.1.4.1.2544.1.12.43.2.1.1.10	PerfCounter64	read-only	The number of Frames Marked Green.
NUM f3AccFlowPointStatsFMY	1.3.6.1.4.1.2544.1.12.43.2.1.1.11	PerfCounter64	read-only	The number of Frames Marked Yellow.
NUM f3AccFlowPointStatsFMRD	1.3.6.1.4.1.2544.1.12.43.2.1.1.12	PerfCounter64	read-only	The number of Frames Marked Red and Discarded.
NUM f3AccFlowPointStatsFTD	1.3.6.1.4.1.2544.1.12.43.2.1.1.13	PerfCounter64	read-only	The number of Frames Tail Dropped.
NUM f3AccFlowPointStatsBytesIn	1.3.6.1.4.1.2544.1.12.43.2.1.1.14	PerfCounter64	read-only	The number of Bytes In in the ingress direction.
NUM f3AccFlowPointStatsBytesOut	1.3.6.1.4.1.2544.1.12.43.2.1.1.15	PerfCounter64	read-only	The number of Bytes Out in the ingress direction.
NUM f3AccFlowPointStatsIBRMax	1.3.6.1.4.1.2544.1.12.43.2.1.1.16	PerfCounter64	read-only	Instantaneous Bit Rate Maximum.
NUM f3AccFlowPointStatsIBRRlMax	1.3.6.1.4.1.2544.1.12.43.2.1.1.17	PerfCounter64	read-only	Instantaneous Bit Rate Maximum - Rate Limited.
NUM f3AccFlowPointStatsIBRMin	1.3.6.1.4.1.2544.1.12.43.2.1.1.18	PerfCounter64	read-only	Instantaneous Bit Rate Minimum.
NUM f3AccFlowPointStatsIBRRlMin	1.3.6.1.4.1.2544.1.12.43.2.1.1.19	PerfCounter64	read-only	Instantaneous Bit Rate Minimum - Rate Limited.
NUM f3AccFlowPointStatsIBR	1.3.6.1.4.1.2544.1.12.43.2.1.1.20	PerfCounter64	read-only	Instantaneous Bit Rate Minimum.
NUM f3AccFlowPointStatsIBRRl	1.3.6.1.4.1.2544.1.12.43.2.1.1.21	PerfCounter64	read-only	Instantaneous Bit Rate Minimum - Rate Limited.
NUM f3AccFlowPointStatsFBCD	1.3.6.1.4.1.2544.1.12.43.2.1.1.22	PerfCounter64	read-only	The number of Frames Dropped - Broadcast Rate Limit.
NUM f3AccFlowPointStatsFMCD	1.3.6.1.4.1.2544.1.12.43.2.1.1.23	PerfCounter64	read-only	The number of Frames Dropped - Multicast Rate Limit.
NUM f3AccFlowPointStatsFdRxFb	1.3.6.1.4.1.2544.1.12.43.2.1.1.24	PerfCounter64	read-only	The number of Frames Dropped RX - Flowpoint Blocked.
NUM f3AccFlowPointStatsFdTxFb	1.3.6.1.4.1.2544.1.12.43.2.1.1.25	PerfCounter64	read-only	The number of Frames Dropped TX - Flowpoint Blocked.
NUM f3AccFlowPointStatsFdicd	1.3.6.1.4.1.2544.1.12.43.2.1.1.26	PerfCounter64	read-only	The number of Frames Dropped - Ingress COS Disabled.
NUM f3AccFlowPointStatsNumLearnTableFlushes	1.3.6.1.4.1.2544.1.12.43.2.1.1.27	PerfCounter64	read-only	The number of learning table flushes.
f3NetFlowPointStatsTable	1.3.6.1.4.1.2544.1.12.43.2.2		not-accessible	A collection of FlowPoint statistics. These reflect the current data.
f3NetFlowPointStatsEntry	1.3.6.1.4.1.2544.1.12.43.2.2.1		not-accessible	A conceptual row in the f3NetFlowPointStatsTable. Entries exist in this table for each FlowPoint.
I32 f3NetFlowPointStatsIndex	1.3.6.1.4.1.2544.1.12.43.2.2.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this Access Ethernet Flowpoint statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3 corresponds to rollover.
NUM f3NetFlowPointStatsIntervalType	1.3.6.1.4.1.2544.1.12.43.2.2.1.2	CmPmIntervalType	read-only	Interval over which Performance Monitoring data is collected.
T/F f3NetFlowPointStatsValid	1.3.6.1.4.1.2544.1.12.43.2.2.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3NetFlowPointStatsAction	1.3.6.1.4.1.2544.1.12.43.2.2.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3NetFlowPointStatsL2CPFD	1.3.6.1.4.1.2544.1.12.43.2.2.1.5	PerfCounter64	read-only	Layer 2 Control Protocol Frames Discarded.
NUM f3NetFlowPointStatsABRRx	1.3.6.1.4.1.2544.1.12.43.2.2.1.6	PerfCounter64	read-only	The average bit rate.
NUM f3NetFlowPointStatsABRRLRx	1.3.6.1.4.1.2544.1.12.43.2.2.1.7	PerfCounter64	read-only	The average bit rate, rate limited.
NUM f3NetFlowPointStatsUAS	1.3.6.1.4.1.2544.1.12.43.2.2.1.8	PerfCounter64	read-only	The number of Unavailable Seconds (UAS).
NUM f3NetFlowPointStatsSES	1.3.6.1.4.1.2544.1.12.43.2.2.1.9	PerfCounter64	read-only	The number of Severely Errored Seconds (ES).
NUM f3NetFlowPointStatsFMG	1.3.6.1.4.1.2544.1.12.43.2.2.1.10	PerfCounter64	read-only	The number of Frames Marked Green.
NUM f3NetFlowPointStatsFMY	1.3.6.1.4.1.2544.1.12.43.2.2.1.11	PerfCounter64	read-only	The number of Frames Marked Yellow.
NUM f3NetFlowPointStatsFMRD	1.3.6.1.4.1.2544.1.12.43.2.2.1.12	PerfCounter64	read-only	The number of Frames Marked Red and Discarded.
NUM f3NetFlowPointStatsFTD	1.3.6.1.4.1.2544.1.12.43.2.2.1.13	PerfCounter64	read-only	The number of Frames Tail Dropped.
NUM f3NetFlowPointStatsBytesIn	1.3.6.1.4.1.2544.1.12.43.2.2.1.14	PerfCounter64	read-only	The number of Bytes In in the ingress direction.
NUM f3NetFlowPointStatsBytesOut	1.3.6.1.4.1.2544.1.12.43.2.2.1.15	PerfCounter64	read-only	The number of Bytes Out in the ingress direction.
NUM f3NetFlowPointStatsIBRMax	1.3.6.1.4.1.2544.1.12.43.2.2.1.16	PerfCounter64	read-only	Instantaneous Bit Rate Maximum.
NUM f3NetFlowPointStatsIBRRlMax	1.3.6.1.4.1.2544.1.12.43.2.2.1.17	PerfCounter64	read-only	Instantaneous Bit Rate Maximum - Rate Limited.
NUM f3NetFlowPointStatsIBRMin	1.3.6.1.4.1.2544.1.12.43.2.2.1.18	PerfCounter64	read-only	Instantaneous Bit Rate Minimum.
NUM f3NetFlowPointStatsIBRRlMin	1.3.6.1.4.1.2544.1.12.43.2.2.1.19	PerfCounter64	read-only	Instantaneous Bit Rate Minimum - Rate Limited.
NUM f3NetFlowPointStatsIBR	1.3.6.1.4.1.2544.1.12.43.2.2.1.20	PerfCounter64	read-only	Instantaneous Bit Rate Minimum.
NUM f3NetFlowPointStatsIBRRl	1.3.6.1.4.1.2544.1.12.43.2.2.1.21	PerfCounter64	read-only	Instantaneous Bit Rate Minimum - Rate Limited.
NUM f3NetFlowPointStatsFBCD	1.3.6.1.4.1.2544.1.12.43.2.2.1.22	PerfCounter64	read-only	The number of Frames Dropped - Broadcast Rate Limit.
NUM f3NetFlowPointStatsFMCD	1.3.6.1.4.1.2544.1.12.43.2.2.1.23	PerfCounter64	read-only	The number of Frames Dropped - Multicast Rate Limit.
NUM f3NetFlowPointStatsFdRxFb	1.3.6.1.4.1.2544.1.12.43.2.2.1.24	PerfCounter64	read-only	The number of Frames Dropped RX - Flowpoint Blocked.
NUM f3NetFlowPointStatsFdTxFb	1.3.6.1.4.1.2544.1.12.43.2.2.1.25	PerfCounter64	read-only	The number of Frames Dropped TX - Flowpoint Blocked.
NUM f3NetFlowPointStatsFdicd	1.3.6.1.4.1.2544.1.12.43.2.2.1.26	PerfCounter64	read-only	The number of Frames Dropped - Ingress COS Disabled.
NUM f3NetFlowPointStatsNumLearnTableFlushes	1.3.6.1.4.1.2544.1.12.43.2.2.1.27	PerfCounter64	read-only	The number of learning table flushes.
f3AccFlowPointHistoryTable	1.3.6.1.4.1.2544.1.12.43.2.3		not-accessible	A collection of FlowPoint statistics. These reflect the history data.
f3AccFlowPointHistoryEntry	1.3.6.1.4.1.2544.1.12.43.2.3.1		not-accessible	A conceptual row in the f3AccFlowPointHistoryTable. Entries exist in this table for each FlowPoint.
I32 f3AccFlowPointHistoryIndex	1.3.6.1.4.1.2544.1.12.43.2.3.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this Access Ethernet Flowpoint History statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3 corresponds to rollover.
DAT f3AccFlowPointHistoryTime	1.3.6.1.4.1.2544.1.12.43.2.3.1.2	DateAndTime	read-only	Indicates the time of history bin creation.
T/F f3AccFlowPointHistoryValid	1.3.6.1.4.1.2544.1.12.43.2.3.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3AccFlowPointHistoryAction	1.3.6.1.4.1.2544.1.12.43.2.3.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3AccFlowPointHistoryL2CPFD	1.3.6.1.4.1.2544.1.12.43.2.3.1.5	PerfCounter64	read-only	Layer 2 Control Protocol Frames Discarded.
NUM f3AccFlowPointHistoryABRRx	1.3.6.1.4.1.2544.1.12.43.2.3.1.6	PerfCounter64	read-only	The average bit rate.
NUM f3AccFlowPointHistoryABRRLRx	1.3.6.1.4.1.2544.1.12.43.2.3.1.7	PerfCounter64	read-only	The average bit rate, rate limited.
NUM f3AccFlowPointHistoryUAS	1.3.6.1.4.1.2544.1.12.43.2.3.1.8	PerfCounter64	read-only	The number of Unavailable Seconds (UAS).
NUM f3AccFlowPointHistorySES	1.3.6.1.4.1.2544.1.12.43.2.3.1.9	PerfCounter64	read-only	The number of Severely Errored Seconds (ES).
NUM f3AccFlowPointHistoryFMG	1.3.6.1.4.1.2544.1.12.43.2.3.1.10	PerfCounter64	read-only	The number of Frames Marked Green.
NUM f3AccFlowPointHistoryFMY	1.3.6.1.4.1.2544.1.12.43.2.3.1.11	PerfCounter64	read-only	The number of Frames Marked Yellow.
NUM f3AccFlowPointHistoryFMRD	1.3.6.1.4.1.2544.1.12.43.2.3.1.12	PerfCounter64	read-only	The number of Frames Marked Red and Discarded.
NUM f3AccFlowPointHistoryFTD	1.3.6.1.4.1.2544.1.12.43.2.3.1.13	PerfCounter64	read-only	The number of Frames Tail Dropped.
NUM f3AccFlowPointHistoryBytesIn	1.3.6.1.4.1.2544.1.12.43.2.3.1.14	PerfCounter64	read-only	The number of Bytes In in the ingress direction.
NUM f3AccFlowPointHistoryBytesOut	1.3.6.1.4.1.2544.1.12.43.2.3.1.15	PerfCounter64	read-only	The number of Bytes Out in the ingress direction.
NUM f3AccFlowPointHistoryIBRMax	1.3.6.1.4.1.2544.1.12.43.2.3.1.16	PerfCounter64	read-only	Instantaneous Bit Rate Maximum.
NUM f3AccFlowPointHistoryIBRRlMax	1.3.6.1.4.1.2544.1.12.43.2.3.1.17	PerfCounter64	read-only	Instantaneous Bit Rate Maximum - Rate Limited.
NUM f3AccFlowPointHistoryIBRMin	1.3.6.1.4.1.2544.1.12.43.2.3.1.18	PerfCounter64	read-only	Instantaneous Bit Rate Minimum.
NUM f3AccFlowPointHistoryIBRRlMin	1.3.6.1.4.1.2544.1.12.43.2.3.1.19	PerfCounter64	read-only	Instantaneous Bit Rate Minimum - Rate Limited.
NUM f3AccFlowPointHistoryIBR	1.3.6.1.4.1.2544.1.12.43.2.3.1.20	PerfCounter64	read-only	Instantaneous Bit Rate Minimum.
NUM f3AccFlowPointHistoryIBRRl	1.3.6.1.4.1.2544.1.12.43.2.3.1.21	PerfCounter64	read-only	Instantaneous Bit Rate Minimum - Rate Limited.
NUM f3AccFlowPointHistoryFBCD	1.3.6.1.4.1.2544.1.12.43.2.3.1.22	PerfCounter64	read-only	The number of Frames Dropped - Broadcast Rate Limit.
NUM f3AccFlowPointHistoryFMCD	1.3.6.1.4.1.2544.1.12.43.2.3.1.23	PerfCounter64	read-only	The number of Frames Dropped - Multicast Rate Limit.
NUM f3AccFlowPointHistoryFdRxFb	1.3.6.1.4.1.2544.1.12.43.2.3.1.24	PerfCounter64	read-only	The number of Frames Dropped RX - Flowpoint Blocked.
NUM f3AccFlowPointHistoryFdTxFb	1.3.6.1.4.1.2544.1.12.43.2.3.1.25	PerfCounter64	read-only	The number of Frames Dropped TX - Flowpoint Blocked.
NUM f3AccFlowPointHistoryFdicd	1.3.6.1.4.1.2544.1.12.43.2.3.1.26	PerfCounter64	read-only	The number of Frames Dropped - Ingress COS Disabled.
NUM f3AccFlowPointHistoryNumLearnTableFlushes	1.3.6.1.4.1.2544.1.12.43.2.3.1.27	PerfCounter64	read-only	The number of learning table flushes.
f3NetFlowPointHistoryTable	1.3.6.1.4.1.2544.1.12.43.2.4		not-accessible	A collection of FlowPoint statistics. These reflect the history data.
f3NetFlowPointHistoryEntry	1.3.6.1.4.1.2544.1.12.43.2.4.1		not-accessible	A conceptual row in the f3NetFlowPointHistoryTable. Entries exist in this table for each FlowPoint.
I32 f3NetFlowPointHistoryIndex	1.3.6.1.4.1.2544.1.12.43.2.4.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this Access Ethernet Flowpoint History statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3 corresponds to rollover.
DAT f3NetFlowPointHistoryTime	1.3.6.1.4.1.2544.1.12.43.2.4.1.2	DateAndTime	read-only	Indicates the time of history bin creation.
T/F f3NetFlowPointHistoryValid	1.3.6.1.4.1.2544.1.12.43.2.4.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3NetFlowPointHistoryAction	1.3.6.1.4.1.2544.1.12.43.2.4.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3NetFlowPointHistoryL2CPFD	1.3.6.1.4.1.2544.1.12.43.2.4.1.5	PerfCounter64	read-only	Layer 2 Control Protocol Frames Discarded.
NUM f3NetFlowPointHistoryABRRx	1.3.6.1.4.1.2544.1.12.43.2.4.1.6	PerfCounter64	read-only	The average bit rate.
NUM f3NetFlowPointHistoryABRRLRx	1.3.6.1.4.1.2544.1.12.43.2.4.1.7	PerfCounter64	read-only	The average bit rate, rate limited.
NUM f3NetFlowPointHistoryUAS	1.3.6.1.4.1.2544.1.12.43.2.4.1.8	PerfCounter64	read-only	The number of Unavailable Seconds (UAS).
NUM f3NetFlowPointHistorySES	1.3.6.1.4.1.2544.1.12.43.2.4.1.9	PerfCounter64	read-only	The number of Severely Errored Seconds (ES).
NUM f3NetFlowPointHistoryFMG	1.3.6.1.4.1.2544.1.12.43.2.4.1.10	PerfCounter64	read-only	The number of Frames Marked Green.
NUM f3NetFlowPointHistoryFMY	1.3.6.1.4.1.2544.1.12.43.2.4.1.11	PerfCounter64	read-only	The number of Frames Marked Yellow.
NUM f3NetFlowPointHistoryFMRD	1.3.6.1.4.1.2544.1.12.43.2.4.1.12	PerfCounter64	read-only	The number of Frames Marked Red and Discarded.
NUM f3NetFlowPointHistoryFTD	1.3.6.1.4.1.2544.1.12.43.2.4.1.13	PerfCounter64	read-only	The number of Frames Tail Dropped.
NUM f3NetFlowPointHistoryBytesIn	1.3.6.1.4.1.2544.1.12.43.2.4.1.14	PerfCounter64	read-only	The number of Bytes In in the ingress direction.
NUM f3NetFlowPointHistoryBytesOut	1.3.6.1.4.1.2544.1.12.43.2.4.1.15	PerfCounter64	read-only	The number of Bytes Out in the ingress direction.
NUM f3NetFlowPointHistoryIBRMax	1.3.6.1.4.1.2544.1.12.43.2.4.1.16	PerfCounter64	read-only	Instantaneous Bit Rate Maximum.
NUM f3NetFlowPointHistoryIBRRlMax	1.3.6.1.4.1.2544.1.12.43.2.4.1.17	PerfCounter64	read-only	Instantaneous Bit Rate Maximum - Rate Limited.
NUM f3NetFlowPointHistoryIBRMin	1.3.6.1.4.1.2544.1.12.43.2.4.1.18	PerfCounter64	read-only	Instantaneous Bit Rate Minimum.
NUM f3NetFlowPointHistoryIBRRlMin	1.3.6.1.4.1.2544.1.12.43.2.4.1.19	PerfCounter64	read-only	Instantaneous Bit Rate Minimum - Rate Limited.
NUM f3NetFlowPointHistoryIBR	1.3.6.1.4.1.2544.1.12.43.2.4.1.20	PerfCounter64	read-only	Instantaneous Bit Rate Minimum.
NUM f3NetFlowPointHistoryIBRRl	1.3.6.1.4.1.2544.1.12.43.2.4.1.21	PerfCounter64	read-only	Instantaneous Bit Rate Minimum - Rate Limited.
NUM f3NetFlowPointHistoryFBCD	1.3.6.1.4.1.2544.1.12.43.2.4.1.22	PerfCounter64	read-only	The number of Frames Dropped - Broadcast Rate Limit.
NUM f3NetFlowPointHistoryFMCD	1.3.6.1.4.1.2544.1.12.43.2.4.1.23	PerfCounter64	read-only	The number of Frames Dropped - Multicast Rate Limit.
NUM f3NetFlowPointHistoryFdRxFb	1.3.6.1.4.1.2544.1.12.43.2.4.1.24	PerfCounter64	read-only	The number of Frames Dropped RX - Flowpoint Blocked.
NUM f3NetFlowPointHistoryFdTxFb	1.3.6.1.4.1.2544.1.12.43.2.4.1.25	PerfCounter64	read-only	The number of Frames Dropped TX - Flowpoint Blocked.
NUM f3NetFlowPointHistoryFdicd	1.3.6.1.4.1.2544.1.12.43.2.4.1.26	PerfCounter64	read-only	The number of Frames Dropped - Ingress COS Disabled.
NUM f3NetFlowPointHistoryNumLearnTableFlushes	1.3.6.1.4.1.2544.1.12.43.2.4.1.27	PerfCounter64	read-only	The number of learning table flushes.
f3AccFlowPointThresholdTable	1.3.6.1.4.1.2544.1.12.43.2.5		not-accessible	A table of entries that allow manageability of Agg FlowPoint Thresholds.
f3AccFlowPointThresholdEntry	1.3.6.1.4.1.2544.1.12.43.2.5.1		not-accessible	A conceptual row in the f3AccFlowPointThresholdTable.
I32 f3AccFlowPointThresholdIndex	1.3.6.1.4.1.2544.1.12.43.2.5.1.1	Integer32	read-only	An index that uniquely identifies an entry in the f3AccFlowPointThresholdTable.
NUM f3AccFlowPointThresholdInterval	1.3.6.1.4.1.2544.1.12.43.2.5.1.2	CmPmIntervalType	read-only	The interval over which monitored value is sampled and compared with the specified threshold.
NUM f3AccFlowPointThresholdVariable	1.3.6.1.4.1.2544.1.12.43.2.5.1.3	VariablePointer	read-only	The object identifier of the particular variable to be sampled.
U32 f3AccFlowPointThresholdValueLo	1.3.6.1.4.1.2544.1.12.43.2.5.1.4	Unsigned32	read-write	Lower 32 bits of the threshold value.
U32 f3AccFlowPointThresholdValueHi	1.3.6.1.4.1.2544.1.12.43.2.5.1.5	Unsigned32	read-write	Higher 32 bits of the threshold value.
C64 f3AccFlowPointThresholdMonValue	1.3.6.1.4.1.2544.1.12.43.2.5.1.6	Counter64	read-only	Monitored value corresponding to f3AccFlowPointThresholdVariable.
f3NetFlowPointThresholdTable	1.3.6.1.4.1.2544.1.12.43.2.6		not-accessible	A table of entries that allow manageability of Agg FlowPoint Thresholds.
f3NetFlowPointThresholdEntry	1.3.6.1.4.1.2544.1.12.43.2.6.1		not-accessible	A conceptual row in the f3NetFlowPointThresholdTable.
I32 f3NetFlowPointThresholdIndex	1.3.6.1.4.1.2544.1.12.43.2.6.1.1	Integer32	read-only	An index that uniquely identifies an entry in the f3NetFlowPointThresholdTable.
NUM f3NetFlowPointThresholdInterval	1.3.6.1.4.1.2544.1.12.43.2.6.1.2	CmPmIntervalType	read-only	The interval over which monitored value is sampled and compared with the specified threshold.
NUM f3NetFlowPointThresholdVariable	1.3.6.1.4.1.2544.1.12.43.2.6.1.3	VariablePointer	read-only	The object identifier of the particular variable to be sampled.
U32 f3NetFlowPointThresholdValueLo	1.3.6.1.4.1.2544.1.12.43.2.6.1.4	Unsigned32	read-write	Lower 32 bits of the threshold value.
U32 f3NetFlowPointThresholdValueHi	1.3.6.1.4.1.2544.1.12.43.2.6.1.5	Unsigned32	read-write	Higher 32 bits of the threshold value.
C64 f3NetFlowPointThresholdMonValue	1.3.6.1.4.1.2544.1.12.43.2.6.1.6	Counter64	read-only	Monitored value corresponding to f3NetFlowPointThresholdVariable.
f3MPFlowStatsTable	1.3.6.1.4.1.2544.1.12.43.2.7		not-accessible	A collection of MP Flow statistics. These reflect the current data.
f3MPFlowStatsEntry	1.3.6.1.4.1.2544.1.12.43.2.7.1		not-accessible	A conceptual row in the f3MPFlowStatsTable. Entries exist in this table for each MP Flow.
I32 f3MPFlowStatsIndex	1.3.6.1.4.1.2544.1.12.43.2.7.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this MP Flow statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3 corresponds to rollover.
NUM f3MPFlowStatsIntervalType	1.3.6.1.4.1.2544.1.12.43.2.7.1.2	CmPmIntervalType	read-only	Interval over which Performance Monitoring data is collected.
T/F f3MPFlowStatsValid	1.3.6.1.4.1.2544.1.12.43.2.7.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3MPFlowStatsAction	1.3.6.1.4.1.2544.1.12.43.2.7.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3MPFlowStatsFDStaticBlock	1.3.6.1.4.1.2544.1.12.43.2.7.1.5	PerfCounter64	read-only	Specifies current counter for number of frames discarded due to a static entry in Mac Table.
NUM f3MPFlowStatsFDHairPin	1.3.6.1.4.1.2544.1.12.43.2.7.1.6	PerfCounter64	read-only	Specifies current counter for number of frames discarded because destination Port is the ingress flowpoint or destination Port is in the same Split Horizon Group.
NUM f3MPFlowStatsMacTableDiscards	1.3.6.1.4.1.2544.1.12.43.2.7.1.7	PerfCounter64	read-only	Specifies current counter for total number of MAC Table entries that have been or would have been learned, but have been failed due to a lack of storage space in the Filtering Database.
NUM f3MPFlowStatsFDProtLearn	1.3.6.1.4.1.2544.1.12.43.2.7.1.8	PerfCounter64	read-only	Specifies current counter for number of frames dropped - protection learning.
f3MPFlowHistoryTable	1.3.6.1.4.1.2544.1.12.43.2.8		not-accessible	A collection of MP Flow statistics. These reflect the history data.
f3MPFlowHistoryEntry	1.3.6.1.4.1.2544.1.12.43.2.8.1		not-accessible	A conceptual row in the f3MPFlowHistoryTable. Entries exist in this table for each MP Flow.
I32 f3MPFlowHistoryIndex	1.3.6.1.4.1.2544.1.12.43.2.8.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this MP Flow History statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3 corresponds to rollover.
DAT f3MPFlowHistoryTime	1.3.6.1.4.1.2544.1.12.43.2.8.1.2	DateAndTime	read-only	Indicates the time of history bin creation.
T/F f3MPFlowHistoryValid	1.3.6.1.4.1.2544.1.12.43.2.8.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3MPFlowHistoryAction	1.3.6.1.4.1.2544.1.12.43.2.8.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3MPFlowHistoryFDStaticBlock	1.3.6.1.4.1.2544.1.12.43.2.8.1.5	PerfCounter64	read-only	Specifies history bin for number of frames discarded due to a static entry in Mac Table.
NUM f3MPFlowHistoryFDHairPin	1.3.6.1.4.1.2544.1.12.43.2.8.1.6	PerfCounter64	read-only	Specifies history bin for number of frames discarded because destination Port is the ingress flowpoint or destination Port is in the same Split Horizon Group.
NUM f3MPFlowHistoryMacTableDiscards	1.3.6.1.4.1.2544.1.12.43.2.8.1.7	PerfCounter64	read-only	Specifies history bin for total number of MAC Table entries that have been or would have been learned, but have been failed due to a lack of storage space in the Filtering Database.
NUM f3MPFlowHistoryFDProtLearn	1.3.6.1.4.1.2544.1.12.43.2.8.1.8	PerfCounter64	read-only	Specifies history bin for total number of frames dropped - protection learning.
f3MPFlowThresholdTable	1.3.6.1.4.1.2544.1.12.43.2.9		not-accessible	A table of entries that allow manageability of MP Flow Thresholds.
f3MPFlowThresholdEntry	1.3.6.1.4.1.2544.1.12.43.2.9.1		not-accessible	A conceptual row in the f3MPFlowThresholdTable.
I32 f3MPFlowThresholdIndex	1.3.6.1.4.1.2544.1.12.43.2.9.1.1	Integer32	read-only	An index that uniquely identifies an entry in the f3MPFlowThresholdTable.
NUM f3MPFlowThresholdInterval	1.3.6.1.4.1.2544.1.12.43.2.9.1.2	CmPmIntervalType	read-only	The interval over which monitored value is sampled and compared with the specified threshold.
NUM f3MPFlowThresholdVariable	1.3.6.1.4.1.2544.1.12.43.2.9.1.3	VariablePointer	read-only	The object identifier of the particular variable to be sampled.
U32 f3MPFlowThresholdValueLo	1.3.6.1.4.1.2544.1.12.43.2.9.1.4	Unsigned32	read-write	Lower 32 bits of the threshold value.
U32 f3MPFlowThresholdValueHi	1.3.6.1.4.1.2544.1.12.43.2.9.1.5	Unsigned32	read-write	Higher 32 bits of the threshold value.
C64 f3MPFlowThresholdMonValue	1.3.6.1.4.1.2544.1.12.43.2.9.1.6	Counter64	read-only	Monitored value corresponding to f3MPFlowThresholdVariable.
f3AccFpQosShaperStatsTable	1.3.6.1.4.1.2544.1.12.43.2.10		not-accessible	A collection of Acc FlowPoint QOS Shaper statistics. These reflect the current data.
f3AccFpQosShaperStatsEntry	1.3.6.1.4.1.2544.1.12.43.2.10.1		not-accessible	A conceptual row in the f3AccFpQosShaperStatsTable. Entries exist in this table for each FlowPoint QoS Shaper.
I32 f3AccFpQosShaperStatsIndex	1.3.6.1.4.1.2544.1.12.43.2.10.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this QOS Shaper statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
NUM f3AccFpQosShaperStatsIntervalType	1.3.6.1.4.1.2544.1.12.43.2.10.1.2	CmPmIntervalType	read-only	Interval over which Performance Monitoring data is collected.
T/F f3AccFpQosShaperStatsValid	1.3.6.1.4.1.2544.1.12.43.2.10.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3AccFpQosShaperStatsAction	1.3.6.1.4.1.2544.1.12.43.2.10.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3AccFpQosShaperStatsBT	1.3.6.1.4.1.2544.1.12.43.2.10.1.5	PerfCounter64	read-only	Bytes Transmitted.
NUM f3AccFpQosShaperStatsBTD	1.3.6.1.4.1.2544.1.12.43.2.10.1.6	PerfCounter64	read-only	Bytes Tail Dropped.
NUM f3AccFpQosShaperStatsFD	1.3.6.1.4.1.2544.1.12.43.2.10.1.7	PerfCounter64	read-only	Frames Dequeued.
NUM f3AccFpQosShaperStatsFTD	1.3.6.1.4.1.2544.1.12.43.2.10.1.8	PerfCounter64	read-only	Frames Tail Dropped.
NUM f3AccFpQosShaperStatsABRRL	1.3.6.1.4.1.2544.1.12.43.2.10.1.9	PerfCounter64	read-only	Average Bit Rate - Rate Limited.
NUM f3AccFpQosShaperStatsBREDD	1.3.6.1.4.1.2544.1.12.43.2.10.1.10	PerfCounter64	read-only	Bytes Random Early Discard, Dropped.
NUM f3AccFpQosShaperStatsFREDD	1.3.6.1.4.1.2544.1.12.43.2.10.1.11	PerfCounter64	read-only	Frames Random Early Discard, Dropped.
f3AccFpQosShaperHistoryTable	1.3.6.1.4.1.2544.1.12.43.2.11		not-accessible	A collection of Acc FlowPoint QOS Shaper statistics. These reflect the history data.
f3AccFpQosShaperHistoryEntry	1.3.6.1.4.1.2544.1.12.43.2.11.1		not-accessible	A conceptual row in the f3AccFpQosShaperHistoryTable. Entries exist in this table for each FlowPoint QoS Shaper.
I32 f3AccFpQosShaperHistoryIndex	1.3.6.1.4.1.2544.1.12.43.2.11.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this QOS Shaper statistics entry.
DAT f3AccFpQosShaperHistoryTime	1.3.6.1.4.1.2544.1.12.43.2.11.1.2	DateAndTime	read-only	Indicates the time of history bin creation.
T/F f3AccFpQosShaperHistoryValid	1.3.6.1.4.1.2544.1.12.43.2.11.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3AccFpQosShaperHistoryAction	1.3.6.1.4.1.2544.1.12.43.2.11.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3AccFpQosShaperHistoryBT	1.3.6.1.4.1.2544.1.12.43.2.11.1.5	PerfCounter64	read-only	Bytes Transmitted.
NUM f3AccFpQosShaperHistoryBTD	1.3.6.1.4.1.2544.1.12.43.2.11.1.6	PerfCounter64	read-only	Bytes Tail Dropped.
NUM f3AccFpQosShaperHistoryFD	1.3.6.1.4.1.2544.1.12.43.2.11.1.7	PerfCounter64	read-only	Frames Dequeued.
NUM f3AccFpQosShaperHistoryFTD	1.3.6.1.4.1.2544.1.12.43.2.11.1.8	PerfCounter64	read-only	Frames Tail Dropped.
NUM f3AccFpQosShaperHistoryABRRL	1.3.6.1.4.1.2544.1.12.43.2.11.1.9	PerfCounter64	read-only	Average Bit Rate - Rate Limited.
NUM f3AccFpQosShaperHistoryBREDD	1.3.6.1.4.1.2544.1.12.43.2.11.1.10	PerfCounter64	read-only	Bytes Random Early Discard, Dropped.
NUM f3AccFpQosShaperHistoryFREDD	1.3.6.1.4.1.2544.1.12.43.2.11.1.11	PerfCounter64	read-only	Frames Random Early Discard, Dropped.
f3AccFpQosShaperThresholdTable	1.3.6.1.4.1.2544.1.12.43.2.12		not-accessible	A table of entries that allow manageability of Acc FlowPoint QoS Shaper Thresholds.
f3AccFpQosShaperThresholdEntry	1.3.6.1.4.1.2544.1.12.43.2.12.1		not-accessible	A conceptual row in the f3AccFpQosShaperThresholdTable.
I32 f3AccFpQosShaperThresholdIndex	1.3.6.1.4.1.2544.1.12.43.2.12.1.1	Integer32	read-only	An index that uniquely identifies an entry in the f3AccFpQosShaperThresholdTable.
NUM f3AccFpQosShaperThresholdInterval	1.3.6.1.4.1.2544.1.12.43.2.12.1.2	CmPmIntervalType	read-only	The interval over which monitored value is sampled and compared with the specified threshold.
NUM f3AccFpQosShaperThresholdVariable	1.3.6.1.4.1.2544.1.12.43.2.12.1.3	VariablePointer	read-only	The object identifier of the particular variable to be sampled.
U32 f3AccFpQosShaperThresholdValueLo	1.3.6.1.4.1.2544.1.12.43.2.12.1.4	Unsigned32	read-write	Lower 32 bits of the threshold value.
U32 f3AccFpQosShaperThresholdValueHi	1.3.6.1.4.1.2544.1.12.43.2.12.1.5	Unsigned32	read-write	Higher 32 bits of the threshold value.
C64 f3AccFpQosShaperThresholdMonValue	1.3.6.1.4.1.2544.1.12.43.2.12.1.6	Counter64	read-only	Monitored value corresponding to f3AccFpQosShaperThresholdVariable.
f3NetFpQosShaperStatsTable	1.3.6.1.4.1.2544.1.12.43.2.13		not-accessible	A collection of Net FlowPoint QOS Shaper statistics. These reflect the current data.
f3NetFpQosShaperStatsEntry	1.3.6.1.4.1.2544.1.12.43.2.13.1		not-accessible	A conceptual row in the f3NetFpQosShaperStatsTable. Entries exist in this table for each FlowPoint QoS Shaper.
I32 f3NetFpQosShaperStatsIndex	1.3.6.1.4.1.2544.1.12.43.2.13.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this QOS Shaper statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
NUM f3NetFpQosShaperStatsIntervalType	1.3.6.1.4.1.2544.1.12.43.2.13.1.2	CmPmIntervalType	read-only	Interval over which Performance Monitoring data is collected.
T/F f3NetFpQosShaperStatsValid	1.3.6.1.4.1.2544.1.12.43.2.13.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3NetFpQosShaperStatsAction	1.3.6.1.4.1.2544.1.12.43.2.13.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3NetFpQosShaperStatsBT	1.3.6.1.4.1.2544.1.12.43.2.13.1.5	PerfCounter64	read-only	Bytes Transmitted.
NUM f3NetFpQosShaperStatsBTD	1.3.6.1.4.1.2544.1.12.43.2.13.1.6	PerfCounter64	read-only	Bytes Tail Dropped.
NUM f3NetFpQosShaperStatsFD	1.3.6.1.4.1.2544.1.12.43.2.13.1.7	PerfCounter64	read-only	Frames Dequeued.
NUM f3NetFpQosShaperStatsFTD	1.3.6.1.4.1.2544.1.12.43.2.13.1.8	PerfCounter64	read-only	Frames Tail Dropped.
NUM f3NetFpQosShaperStatsABRRL	1.3.6.1.4.1.2544.1.12.43.2.13.1.9	PerfCounter64	read-only	Average Bit Rate - Rate Limited.
NUM f3NetFpQosShaperStatsBREDD	1.3.6.1.4.1.2544.1.12.43.2.13.1.10	PerfCounter64	read-only	Bytes Random Early Discard, Dropped.
NUM f3NetFpQosShaperStatsFREDD	1.3.6.1.4.1.2544.1.12.43.2.13.1.11	PerfCounter64	read-only	Frames Random Early Discard, Dropped.
f3NetFpQosShaperHistoryTable	1.3.6.1.4.1.2544.1.12.43.2.14		not-accessible	A collection of Net FlowPoint QOS Shaper statistics. These reflect the history data.
f3NetFpQosShaperHistoryEntry	1.3.6.1.4.1.2544.1.12.43.2.14.1		not-accessible	A conceptual row in the f3NetFpQosShaperHistoryTable. Entries exist in this table for each FlowPoint QoS Shaper.
I32 f3NetFpQosShaperHistoryIndex	1.3.6.1.4.1.2544.1.12.43.2.14.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this QOS Shaper statistics entry.
DAT f3NetFpQosShaperHistoryTime	1.3.6.1.4.1.2544.1.12.43.2.14.1.2	DateAndTime	read-only	Indicates the time of history bin creation.
T/F f3NetFpQosShaperHistoryValid	1.3.6.1.4.1.2544.1.12.43.2.14.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3NetFpQosShaperHistoryAction	1.3.6.1.4.1.2544.1.12.43.2.14.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3NetFpQosShaperHistoryBT	1.3.6.1.4.1.2544.1.12.43.2.14.1.5	PerfCounter64	read-only	Bytes Transmitted.
NUM f3NetFpQosShaperHistoryBTD	1.3.6.1.4.1.2544.1.12.43.2.14.1.6	PerfCounter64	read-only	Bytes Tail Dropped.
NUM f3NetFpQosShaperHistoryFD	1.3.6.1.4.1.2544.1.12.43.2.14.1.7	PerfCounter64	read-only	Frames Dequeued.
NUM f3NetFpQosShaperHistoryFTD	1.3.6.1.4.1.2544.1.12.43.2.14.1.8	PerfCounter64	read-only	Frames Tail Dropped.
NUM f3NetFpQosShaperHistoryABRRL	1.3.6.1.4.1.2544.1.12.43.2.14.1.9	PerfCounter64	read-only	Average Bit Rate - Rate Limited.
NUM f3NetFpQosShaperHistoryBREDD	1.3.6.1.4.1.2544.1.12.43.2.14.1.10	PerfCounter64	read-only	Bytes Random Early Discard, Dropped.
NUM f3NetFpQosShaperHistoryFREDD	1.3.6.1.4.1.2544.1.12.43.2.14.1.11	PerfCounter64	read-only	Frames Random Early Discard, Dropped.
f3NetFpQosShaperThresholdTable	1.3.6.1.4.1.2544.1.12.43.2.15		not-accessible	A table of entries that allow manageability of Net FlowPoint QoS Shaper Thresholds.
f3NetFpQosShaperThresholdEntry	1.3.6.1.4.1.2544.1.12.43.2.15.1		not-accessible	A conceptual row in the f3NetFpQosShaperThresholdTable.
I32 f3NetFpQosShaperThresholdIndex	1.3.6.1.4.1.2544.1.12.43.2.15.1.1	Integer32	read-only	An index that uniquely identifies an entry in the f3NetFpQosShaperThresholdTable.
NUM f3NetFpQosShaperThresholdInterval	1.3.6.1.4.1.2544.1.12.43.2.15.1.2	CmPmIntervalType	read-only	The interval over which monitored value is sampled and compared with the specified threshold.
NUM f3NetFpQosShaperThresholdVariable	1.3.6.1.4.1.2544.1.12.43.2.15.1.3	VariablePointer	read-only	The object identifier of the particular variable to be sampled.
U32 f3NetFpQosShaperThresholdValueLo	1.3.6.1.4.1.2544.1.12.43.2.15.1.4	Unsigned32	read-write	Lower 32 bits of the threshold value.
U32 f3NetFpQosShaperThresholdValueHi	1.3.6.1.4.1.2544.1.12.43.2.15.1.5	Unsigned32	read-write	Higher 32 bits of the threshold value.
C64 f3NetFpQosShaperThresholdMonValue	1.3.6.1.4.1.2544.1.12.43.2.15.1.6	Counter64	read-only	Monitored value corresponding to f3NetFpQosShaperThresholdVariable.
f3AccFpQosPolicerStatsTable	1.3.6.1.4.1.2544.1.12.43.2.16		not-accessible	A collection of Acc FlowPoint QOS Policer statistics. These reflect the current data.
f3AccFpQosPolicerStatsEntry	1.3.6.1.4.1.2544.1.12.43.2.16.1		not-accessible	A conceptual row in the f3AccFpQosPolicerStatsTable. Entries exist in this table for each Acc FlowPoint QoS Policer.
I32 f3AccFpQosPolicerStatsIndex	1.3.6.1.4.1.2544.1.12.43.2.16.1.1	Integer32	read-only	An integer index value used to uniquely identify this QOS Policer statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
NUM f3AccFpQosPolicerStatsIntervalType	1.3.6.1.4.1.2544.1.12.43.2.16.1.2	CmPmIntervalType	read-only	Interval over which Performance Monitoring data is collected.
T/F f3AccFpQosPolicerStatsValid	1.3.6.1.4.1.2544.1.12.43.2.16.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3AccFpQosPolicerStatsAction	1.3.6.1.4.1.2544.1.12.43.2.16.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3AccFpQosPolicerStatsFMG	1.3.6.1.4.1.2544.1.12.43.2.16.1.5	PerfCounter64	read-only	Frames Marked Green.
NUM f3AccFpQosPolicerStatsFMY	1.3.6.1.4.1.2544.1.12.43.2.16.1.6	PerfCounter64	read-only	Frames Marked Yellow.
NUM f3AccFpQosPolicerStatsFMRD	1.3.6.1.4.1.2544.1.12.43.2.16.1.7	PerfCounter64	read-only	Frames Marked Red and Discarded.
NUM f3AccFpQosPolicerStatsBytesIn	1.3.6.1.4.1.2544.1.12.43.2.16.1.8	PerfCounter64	read-only	Number of bytes received by the Policer.
NUM f3AccFpQosPolicerStatsBytesOut	1.3.6.1.4.1.2544.1.12.43.2.16.1.9	PerfCounter64	read-only	Number of bytes transmitted by the Policer.
NUM f3AccFpQosPolicerStatsABR	1.3.6.1.4.1.2544.1.12.43.2.16.1.10	PerfCounter64	read-only	Average Bit Rate on the Policer.
f3AccFpQosPolicerHistoryTable	1.3.6.1.4.1.2544.1.12.43.2.17		not-accessible	A collection of Acc FlowPoint QOS Policer statistics. These reflect the history data.
f3AccFpQosPolicerHistoryEntry	1.3.6.1.4.1.2544.1.12.43.2.17.1		not-accessible	A conceptual row in the f3AccFpQosPolicerHistoryTable. Entries exist in this table for each Acc FlowPoint QoS Policer.
I32 f3AccFpQosPolicerHistoryIndex	1.3.6.1.4.1.2544.1.12.43.2.17.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this QOS Policer history entry.
DAT f3AccFpQosPolicerHistoryTime	1.3.6.1.4.1.2544.1.12.43.2.17.1.2	DateAndTime	read-only	Indicates the time of history bin creation.
T/F f3AccFpQosPolicerHistoryValid	1.3.6.1.4.1.2544.1.12.43.2.17.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3AccFpQosPolicerHistoryAction	1.3.6.1.4.1.2544.1.12.43.2.17.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3AccFpQosPolicerHistoryFMG	1.3.6.1.4.1.2544.1.12.43.2.17.1.5	PerfCounter64	read-only	Frames Marked Green.
NUM f3AccFpQosPolicerHistoryFMY	1.3.6.1.4.1.2544.1.12.43.2.17.1.6	PerfCounter64	read-only	Frames Marked Yellow.
NUM f3AccFpQosPolicerHistoryFMRD	1.3.6.1.4.1.2544.1.12.43.2.17.1.7	PerfCounter64	read-only	Frames Marked Red and Discarded.
NUM f3AccFpQosPolicerHistoryBytesIn	1.3.6.1.4.1.2544.1.12.43.2.17.1.8	PerfCounter64	read-only	Number of bytes received by the Policer.
NUM f3AccFpQosPolicerHistoryBytesOut	1.3.6.1.4.1.2544.1.12.43.2.17.1.9	PerfCounter64	read-only	Number of bytes transmitted by the Policer.
NUM f3AccFpQosPolicerHistoryABR	1.3.6.1.4.1.2544.1.12.43.2.17.1.10	PerfCounter64	read-only	Average Bit Rate on the Policer.
f3AccFpQosPolicerThresholdTable	1.3.6.1.4.1.2544.1.12.43.2.18		not-accessible	A table of entries that allow manageability of QOS Policer Thresholds.
f3AccFpQosPolicerThresholdEntry	1.3.6.1.4.1.2544.1.12.43.2.18.1		not-accessible	A conceptual row in the f3AccFpQosPolicerThresholdTable.
I32 f3AccFpQosPolicerThresholdIndex	1.3.6.1.4.1.2544.1.12.43.2.18.1.1	Integer32	read-only	An index that uniquely identifies an entry in the f3AccFpQosPolicerThresholdTable.
NUM f3AccFpQosPolicerThresholdInterval	1.3.6.1.4.1.2544.1.12.43.2.18.1.2	CmPmIntervalType	read-only	The interval over which monitored value is sampled and compared with the specified threshold.
NUM f3AccFpQosPolicerThresholdVariable	1.3.6.1.4.1.2544.1.12.43.2.18.1.3	VariablePointer	read-only	The object identifier of the particular variable to be sampled.
U32 f3AccFpQosPolicerThresholdValueLo	1.3.6.1.4.1.2544.1.12.43.2.18.1.4	Unsigned32	read-write	Lower 32 bits of the threshold value.
U32 f3AccFpQosPolicerThresholdValueHi	1.3.6.1.4.1.2544.1.12.43.2.18.1.5	Unsigned32	read-write	Higher 32 bits of the threshold value.
C64 f3AccFpQosPolicerThresholdMonValue	1.3.6.1.4.1.2544.1.12.43.2.18.1.6	Counter64	read-only	Monitored value corresponding to f3AccFpQosPolicerThresholdVariable.
f3NetFpQosPolicerStatsTable	1.3.6.1.4.1.2544.1.12.43.2.19		not-accessible	A collection of Net FlowPoint QOS Policer statistics. These reflect the current data.
f3NetFpQosPolicerStatsEntry	1.3.6.1.4.1.2544.1.12.43.2.19.1		not-accessible	A conceptual row in the f3NetFpQosPolicerStatsTable. Entries exist in this table for each Net FlowPoint QoS Policer.
I32 f3NetFpQosPolicerStatsIndex	1.3.6.1.4.1.2544.1.12.43.2.19.1.1	Integer32	read-only	An integer index value used to uniquely identify this QOS Policer statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
NUM f3NetFpQosPolicerStatsIntervalType	1.3.6.1.4.1.2544.1.12.43.2.19.1.2	CmPmIntervalType	read-only	Interval over which Performance Monitoring data is collected.
T/F f3NetFpQosPolicerStatsValid	1.3.6.1.4.1.2544.1.12.43.2.19.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3NetFpQosPolicerStatsAction	1.3.6.1.4.1.2544.1.12.43.2.19.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3NetFpQosPolicerStatsFMG	1.3.6.1.4.1.2544.1.12.43.2.19.1.5	PerfCounter64	read-only	Frames Marked Green.
NUM f3NetFpQosPolicerStatsFMY	1.3.6.1.4.1.2544.1.12.43.2.19.1.6	PerfCounter64	read-only	Frames Marked Yellow.
NUM f3NetFpQosPolicerStatsFMRD	1.3.6.1.4.1.2544.1.12.43.2.19.1.7	PerfCounter64	read-only	Frames Marked Red and Discarded.
NUM f3NetFpQosPolicerStatsBytesIn	1.3.6.1.4.1.2544.1.12.43.2.19.1.8	PerfCounter64	read-only	Number of bytes received by the Policer.
NUM f3NetFpQosPolicerStatsBytesOut	1.3.6.1.4.1.2544.1.12.43.2.19.1.9	PerfCounter64	read-only	Number of bytes transmitted by the Policer.
NUM f3NetFpQosPolicerStatsABR	1.3.6.1.4.1.2544.1.12.43.2.19.1.10	PerfCounter64	read-only	Average Bit Rate on the Policer.
f3NetFpQosPolicerHistoryTable	1.3.6.1.4.1.2544.1.12.43.2.20		not-accessible	A collection of Net FlowPoint QOS Policer statistics. These reflect the history data.
f3NetFpQosPolicerHistoryEntry	1.3.6.1.4.1.2544.1.12.43.2.20.1		not-accessible	A conceptual row in the f3NetFpQosPolicerHistoryTable. Entries exist in this table for each Net FlowPoint QoS Policer.
I32 f3NetFpQosPolicerHistoryIndex	1.3.6.1.4.1.2544.1.12.43.2.20.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this QOS Policer history entry.
DAT f3NetFpQosPolicerHistoryTime	1.3.6.1.4.1.2544.1.12.43.2.20.1.2	DateAndTime	read-only	Indicates the time of history bin creation.
T/F f3NetFpQosPolicerHistoryValid	1.3.6.1.4.1.2544.1.12.43.2.20.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3NetFpQosPolicerHistoryAction	1.3.6.1.4.1.2544.1.12.43.2.20.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3NetFpQosPolicerHistoryFMG	1.3.6.1.4.1.2544.1.12.43.2.20.1.5	PerfCounter64	read-only	Frames Marked Green.
NUM f3NetFpQosPolicerHistoryFMY	1.3.6.1.4.1.2544.1.12.43.2.20.1.6	PerfCounter64	read-only	Frames Marked Yellow.
NUM f3NetFpQosPolicerHistoryFMRD	1.3.6.1.4.1.2544.1.12.43.2.20.1.7	PerfCounter64	read-only	Frames Marked Red and Discarded.
NUM f3NetFpQosPolicerHistoryBytesIn	1.3.6.1.4.1.2544.1.12.43.2.20.1.8	PerfCounter64	read-only	Number of bytes received by the Policer.
NUM f3NetFpQosPolicerHistoryBytesOut	1.3.6.1.4.1.2544.1.12.43.2.20.1.9	PerfCounter64	read-only	Number of bytes transmitted by the Policer.
NUM f3NetFpQosPolicerHistoryABR	1.3.6.1.4.1.2544.1.12.43.2.20.1.10	PerfCounter64	read-only	Average Bit Rate on the Policer.
f3NetFpQosPolicerThresholdTable	1.3.6.1.4.1.2544.1.12.43.2.21		not-accessible	A table of entries that allow manageability of QOS Policer Thresholds.
f3NetFpQosPolicerThresholdEntry	1.3.6.1.4.1.2544.1.12.43.2.21.1		not-accessible	A conceptual row in the f3NetFpQosPolicerThresholdTable.
I32 f3NetFpQosPolicerThresholdIndex	1.3.6.1.4.1.2544.1.12.43.2.21.1.1	Integer32	read-only	An index that uniquely identifies an entry in the f3NetFpQosPolicerThresholdTable.
NUM f3NetFpQosPolicerThresholdInterval	1.3.6.1.4.1.2544.1.12.43.2.21.1.2	CmPmIntervalType	read-only	The interval over which monitored value is sampled and compared with the specified threshold.
NUM f3NetFpQosPolicerThresholdVariable	1.3.6.1.4.1.2544.1.12.43.2.21.1.3	VariablePointer	read-only	The object identifier of the particular variable to be sampled.
U32 f3NetFpQosPolicerThresholdValueLo	1.3.6.1.4.1.2544.1.12.43.2.21.1.4	Unsigned32	read-write	Lower 32 bits of the threshold value.
U32 f3NetFpQosPolicerThresholdValueHi	1.3.6.1.4.1.2544.1.12.43.2.21.1.5	Unsigned32	read-write	Higher 32 bits of the threshold value.
C64 f3NetFpQosPolicerThresholdMonValue	1.3.6.1.4.1.2544.1.12.43.2.21.1.6	Counter64	read-only	Monitored value corresponding to f3NetFpQosPolicerThresholdVariable.
f3FpmPerfNotifications	1.3.6.1.4.1.2544.1.12.43.3
NTF f3AccFlowPointThresholdCrossingAlert	1.3.6.1.4.1.2544.1.12.43.3.1			This trap is sent each time a threshold on a PM condition on an Ethernet Access Port FlowPoint is crossed.
NTF f3NetFlowPointThresholdCrossingAlert	1.3.6.1.4.1.2544.1.12.43.3.2			This trap is sent each time a threshold on a PM condition on an Ethernet Network Port FlowPoint is crossed.
NTF f3MPFlowThresholdCrossingAlert	1.3.6.1.4.1.2544.1.12.43.3.3			This trap is sent each time a threshold on a PM condition on an MP Flow is crossed.
NTF f3AccFpQosShaperThresholdCrossingAlert	1.3.6.1.4.1.2544.1.12.43.3.4			This trap is sent each time a threshold on a PM condition on an Acc FlowPoint QoS Shaper is crossed.
NTF f3NetFpQosShaperThresholdCrossingAlert	1.3.6.1.4.1.2544.1.12.43.3.5			This trap is sent each time a threshold on a PM condition on an Net FlowPoint QoS Shaper is crossed.
NTF f3AccFpQosPolicerThresholdCrossingAlert	1.3.6.1.4.1.2544.1.12.43.3.6			This trap is sent each time a threshold on a PM condition on an Acc FlowPoint QoS Policer is crossed.
NTF f3NetFpQosPolicerThresholdCrossingAlert	1.3.6.1.4.1.2544.1.12.43.3.7			This trap is sent each time a threshold on a PM condition on an Net FlowPoint QoS Policer is crossed.
f3FpmConformance	1.3.6.1.4.1.2544.1.12.43.4
f3FpmCompliances	1.3.6.1.4.1.2544.1.12.43.4.1
f3FpmCompliance	1.3.6.1.4.1.2544.1.12.43.4.1.1			Describes the requirements for conformance to the F3-FPM-MIB compilance.
f3FpmGroups	1.3.6.1.4.1.2544.1.12.43.4.2
f3AccFlowPointGroup	1.3.6.1.4.1.2544.1.12.43.4.2.1			A collection of Access Flow Point objects.
f3AccFpQosShaperGroup	1.3.6.1.4.1.2544.1.12.43.4.2.2			A collection of Access Flow Point QoS Shaper objects.
f3AccFpQosPolicerGroup	1.3.6.1.4.1.2544.1.12.43.4.2.3			A collection of Access Flow Point QoS Policer objects.
f3MPFlowExtGroup	1.3.6.1.4.1.2544.1.12.43.4.2.4			A collection of MP Flow objects.
f3AccFlowPointCpdV2Group	1.3.6.1.4.1.2544.1.12.43.4.2.5			A collection of Access Flow Point CDPV2 objects.
f3AccFlowPointLearningConfigGroup	1.3.6.1.4.1.2544.1.12.43.4.2.6			A collection of Access Flowpoint Learning Config objects.
f3NetFlowPointGroup	1.3.6.1.4.1.2544.1.12.43.4.2.7			A collection of Network Flow Point objects.
f3NetFpQosShaperGroup	1.3.6.1.4.1.2544.1.12.43.4.2.8			A collection of Network Flow Point QoS Shaper objects.
f3NetFpQosPolicerGroup	1.3.6.1.4.1.2544.1.12.43.4.2.9			A collection of Network Flow Point QoS Policer objects.
f3NetFlowPointCpdV2Group	1.3.6.1.4.1.2544.1.12.43.4.2.10			A collection of Network Flow Point CDPV2 objects.
f3NetFlowPointLearningConfigGroup	1.3.6.1.4.1.2544.1.12.43.4.2.11			A collection of Network Flowpoint Learning Config objects.
f3AccFlowPointPerfGroup	1.3.6.1.4.1.2544.1.12.43.4.2.12			A collection of Access Flowpoint Performance objects.
f3NetFlowPointPerfGroup	1.3.6.1.4.1.2544.1.12.43.4.2.13			A collection of Network Flowpoint Performance objects.
f3MPFlowPerfGroup	1.3.6.1.4.1.2544.1.12.43.4.2.14			A collection of MP Flow Performance objects.
f3AccFpQosShaperPerfGroup	1.3.6.1.4.1.2544.1.12.43.4.2.15			A collection of Acc FlowPoint QoS Shaper Performance objects.
f3NetFpQosShaperPerfGroup	1.3.6.1.4.1.2544.1.12.43.4.2.16			A collection of Net FlowPoint QoS Shaper Performance objects.
f3AccFpQosPolicerPerfGroup	1.3.6.1.4.1.2544.1.12.43.4.2.17			A collection of Acc FlowPoint QoS Policer Performance objects.
f3NetFpQosPolicerPerfGroup	1.3.6.1.4.1.2544.1.12.43.4.2.18			A collection of Net FlowPoint QoS Policer Performance objects.
f3FpmPerfNotifGroup	1.3.6.1.4.1.2544.1.12.43.4.2.19			A collection of notifications related to FSP150CC Threshold Crossing Alerts.

RFC description

Vendor-specific MIB for Flow Point Model management in ADVA Optical Networking F3 product line, defines flowpoint tables and traffic management.

Start monitoring ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (Flow Point Model) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download F3-FPM-MIB

What Is F3-FPM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description