WC7520-MIB

All MIBs › WC7520-MIB

Organization: NETGEAR Inc.

Last Updated: 2020-09-12

Description: MIB for the NETGEAR WC7520 ProSafe 802.11a/b/g/n wireless LAN controller, managing AP associations, system settings, and controller notifications for up to 50 access points

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WC7520-MIB?

WC7520-MIB is NETGEAR's module for the ProSafe WC7520 802.11a/b/g/n wireless LAN controller, a controller product managing up to 50 access points (enterprise OID netgear.productID.Wlancontroller.wc7520). It exposes controller identity and system settings (name, location, country), IP/VLAN network configuration (IP address, subnet mask, gateway, DNS/WINS servers, VLAN tagging), and a notifications group for SNMP traps. Monitoring use includes tracking the controller's operational/system state (wcState) and its network configuration, plus receiving trap-based notifications for events across the managed AP fleet, functioning as the primary software/configuration health indicator for this controller-and-AP deployment. No specific dependency on other MIBs is apparent from the module description beyond standard SNMP notification conventions. It is deployed in mid-sized enterprise wireless networks where a NETGEAR WC7520 controller centrally manages a fleet of up to 50 access points. Engineers can download the WC7520-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WC7520-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NETGEAR WC7520 ProSafe wireless LAN controller

Monitoring Examples

An administrator would poll wcState alongside wcName, wcLocation, and wcCountry to confirm the controller's identity and current operating state, and check wcIpVlanIp, wcIpVlanSubnetMask, and wcIpVlanDefaultGateway for correct network configuration. Receiving a trap defined under wcNotifications with objects populated from wcNotificationObjects (using prefix wcNotificationPrefix) would alert the admin to an event such as an AP joining, leaving, or losing connectivity to the controller.

What Can Be Monitored

controller system identity/location
controller operational state
IP/VLAN network configuration
DNS/WINS server settings
controller trap notifications

Imported Objects

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
StorageType

How to Use in IPNetwork Monitor

Example using wcState OID:

Select an NETGEAR WC7520 ProSafe wireless LAN controller (controller state/network-config/trap status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type wcState into the Find box to locate it in the OID tree, then select it and click OK. It reports the state flag is used to apply the configuration. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value is anything other than 'Applied', since that indicates the condition this object reports has changed to one worth investigating. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
netgear	1.3.6.1.4.1.4526
productID	1.3.6.1.4.1.4526.100
Wlancontroller	1.3.6.1.4.1.4526.100.8
wc7520	1.3.6.1.4.1.4526.100.8.2			The MIB module for 802.11a/b/g/n Prosafe 50AP Wireless Management System iso(1). org(3).dod(6).internet(1).private(4). enterprises(1).netgear(4526).productID(100). Wlancontroller(14).wc7520(2)
wcSystemGeneralSettings	1.3.6.1.4.1.4526.100.8.2.1
STR wcName	1.3.6.1.4.1.4526.100.8.2.1.1	DisplayString	read-write	WC7520 controller name.
INT wcCountry	1.3.6.1.4.1.4526.100.8.2.1.2	INTEGER	read-write	WC7520 controllers country.
STR wcLocation	1.3.6.1.4.1.4526.100.8.2.1.3	DisplayString	read-write	WC7520 controllers location.
INT wcStateEx	1.3.6.1.4.1.4526.100.8.2.1.4	INTEGER	read-write	State flag is used to apply the configuration. Applied(1) : configuration is fresh or applied already. Modified(2) : some of the configuration field is modified but not yet applied. Apply(3) : Use this value to apply modified configuration
wcIpVlan	1.3.6.1.4.1.4526.100.8.2.2
IP wcIpVlanIp	1.3.6.1.4.1.4526.100.8.2.2.1	IpAddress	read-write	IP address of controller
IP wcIpVlanSubnetMask	1.3.6.1.4.1.4526.100.8.2.2.2	IpAddress	read-write	Subnet mask for controller IP
IP wcIpVlanDefaultGateway	1.3.6.1.4.1.4526.100.8.2.2.3	IpAddress	read-write	Default Gateway servers IP address.
IP wcIpVlanPrimaryDnsServer	1.3.6.1.4.1.4526.100.8.2.2.4	IpAddress	read-write	Primary DNS Server IP address
IP wcIpVlanSecondaryDnsServer	1.3.6.1.4.1.4526.100.8.2.2.5	IpAddress	read-write	Secondary DNS Server IP address
STR wcIpVlanWinsServer	1.3.6.1.4.1.4526.100.8.2.2.6	DisplayString	read-write	Wins Server IP address.
INT wcIpVlanVlanEnable	1.3.6.1.4.1.4526.100.8.2.2.7	INTEGER	read-write	enable-disable Vlan. disable(0) : To disable Vlan enable(1) : To enable Vlan
I32 wcIpVlanUntaggedVlan	1.3.6.1.4.1.4526.100.8.2.2.8	Integer32	read-write	WC7520 controller untagged vlan
I32 wcIpVlanManagementVlan	1.3.6.1.4.1.4526.100.8.2.2.9	Integer32	read-write	WC7520 controller management vlan
INT wcIpVlanState	1.3.6.1.4.1.4526.100.8.2.2.10	INTEGER	read-write	State flag is used to apply the configuration. Applied(1) : configuration is fresh or applied already. Modified(2) : some of the configurations field are modified but not yet applied. Apply(3) : Use this value to apply modified configuration
wcAccessPoint	1.3.6.1.4.1.4526.100.8.2.3
wcAccessPointTable	1.3.6.1.4.1.4526.100.8.2.3.1		not-accessible	List of access points managed by WC7520. MAC address is the key index for this table
wcAccessPointEntry	1.3.6.1.4.1.4526.100.8.2.3.1.1		not-accessible	A row describing configuration of one managed access point.
MAC wcAccessPointMac	1.3.6.1.4.1.4526.100.8.2.3.1.1.1	MacAddress	read-only	MAC address of Access Point
IP wcAccessPointIp	1.3.6.1.4.1.4526.100.8.2.3.1.1.2	IpAddress	read-only	IP address of Access Point
IP wcAccessPointSubnetMask	1.3.6.1.4.1.4526.100.8.2.3.1.1.3	IpAddress	read-only	IP subnet mask of Access Point
IP wcAccessPointDefaultGateway	1.3.6.1.4.1.4526.100.8.2.3.1.1.4	IpAddress	read-only	Default gateway for Access Point.
INT wcAccessPointVlanEnable	1.3.6.1.4.1.4526.100.8.2.3.1.1.5	INTEGER	read-write	enable-disable Vlan. disable(0) : To disable Vlan enable(1) : To enable Vlan
I32 wcAccessPointUntaggedVlan	1.3.6.1.4.1.4526.100.8.2.3.1.1.6	Integer32	read-write	Access Point Untagged Vlan.
I32 wcAccessPointManagementVlan	1.3.6.1.4.1.4526.100.8.2.3.1.1.7	Integer32	read-write	Access Point Management Vlan
STR wcAccessPointName	1.3.6.1.4.1.4526.100.8.2.3.1.1.8	DisplayString	read-write	Access Point Name
STR wcAccessPointModel	1.3.6.1.4.1.4526.100.8.2.3.1.1.9	DisplayString	read-only	Access Point Model
I32 wcAccessPointGroup	1.3.6.1.4.1.4526.100.8.2.3.1.1.10	Integer32	read-only	Access Point Group id
I32 wcAccessPointAntenna	1.3.6.1.4.1.4526.100.8.2.3.1.1.11	Integer32	read-only	Access Point Antenna
I32 wcAccessPointBuilding	1.3.6.1.4.1.4526.100.8.2.3.1.1.12	Integer32	read-write	Access Point building index.
I32 wcAccessPointFloor	1.3.6.1.4.1.4526.100.8.2.3.1.1.13	Integer32	read-write	Access Point floor index
STR wcAccessPointLocation	1.3.6.1.4.1.4526.100.8.2.3.1.1.14	DisplayString	read-write	Access Point location string
I32 wcAccessPointLocX	1.3.6.1.4.1.4526.100.8.2.3.1.1.15	Integer32	read-only	Access Point location x-axis (in meters)
I32 wcAccessPointLocY	1.3.6.1.4.1.4526.100.8.2.3.1.1.16	Integer32	read-only	Access Point location y-axis (in meters)
STR wcAccessPointState	1.3.6.1.4.1.4526.100.8.2.3.1.1.17	DisplayString	read-only	Access Point Status
ROW wcAccessPointRowStatus	1.3.6.1.4.1.4526.100.8.2.3.1.1.18	RowStatus	read-write	Row Status is used to apply the access point configuration. active(1) - send rowstatus as active(1) to apply the configuration. notReady(3) - Indicates that some columns in the row are modified and not yet applied. notInService(2), createAndWait(5), createAndGo(4), destroy(6) - not valid for this table.
wcAccessPointDetailsTable	1.3.6.1.4.1.4526.100.8.2.3.2		not-accessible	This table provides detailed configuration of access point.
wcAccessPointDetailsEntry	1.3.6.1.4.1.4526.100.8.2.3.2.1		not-accessible	A row describing detailed configuration of one managed access point.
MAC wcAccessPointDetailsMac	1.3.6.1.4.1.4526.100.8.2.3.2.1.1	MacAddress	read-only	Access Point MAC address.
IP wcAccessPointDetailsIp	1.3.6.1.4.1.4526.100.8.2.3.2.1.2	IpAddress	read-only	Access Point IP address.
STR wcAccessPointDetailsName	1.3.6.1.4.1.4526.100.8.2.3.2.1.3	DisplayString	read-only	Access Point Name.
STR wcAccessPointDetailsModel	1.3.6.1.4.1.4526.100.8.2.3.2.1.4	DisplayString	read-only	Access Point model.
I32 wcAccessPointDetailsGroup	1.3.6.1.4.1.4526.100.8.2.3.2.1.5	Integer32	read-only	Access Point group index.
STR wcAccessPointDetails24GHzChannel	1.3.6.1.4.1.4526.100.8.2.3.2.1.6	DisplayString	read-only	Access Point 2.4 GHz channel.
STR wcAccessPointDetails5GHzChannel	1.3.6.1.4.1.4526.100.8.2.3.2.1.7	DisplayString	read-only	Access Point 5 GHz channel.
STR wcAccessPointDetails24GHzOperatingChannel	1.3.6.1.4.1.4526.100.8.2.3.2.1.8	DisplayString	read-only	Access Point 2.4 GHz operating channel.
STR wcAccessPointDetails5GHzOperatingChannel	1.3.6.1.4.1.4526.100.8.2.3.2.1.9	DisplayString	read-only	Access Point 5 GHz channel.
STR wcAccessPointDetailsChannelMgmt	1.3.6.1.4.1.4526.100.8.2.3.2.1.10	DisplayString	read-only	This field tells if auto channel allocation is on or not.
I32 wcAccessPointDetailsLoadBalanceMaxClients	1.3.6.1.4.1.4526.100.8.2.3.2.1.11	Integer32	read-only	Max number of clients for load balancing.
I32 wcAccessPointDetailsLoadBalanceSignalQuality	1.3.6.1.4.1.4526.100.8.2.3.2.1.12	Integer32	read-only	Signal quality for load balancing.
wcClients	1.3.6.1.4.1.4526.100.8.2.4
wcClientListTable	1.3.6.1.4.1.4526.100.8.2.4.1		not-accessible	List of all the clients connected to Access points managed by WC7520
wcClientListEntry	1.3.6.1.4.1.4526.100.8.2.4.1.1		not-accessible	Each row give info about a client and access point to which it is connected.
MAC wcClientMac	1.3.6.1.4.1.4526.100.8.2.4.1.1.1	MacAddress	read-only	Mac address of the client.
IP wcClientIp	1.3.6.1.4.1.4526.100.8.2.4.1.1.2	IpAddress	read-only	IP address of the client.
STR wcClientLocation	1.3.6.1.4.1.4526.100.8.2.4.1.1.3	DisplayString	read-only	client location.
STR wcClientApName	1.3.6.1.4.1.4526.100.8.2.4.1.1.4	DisplayString	read-only	Name of Access Point to which cleint is connected.
IP wcClientApIp	1.3.6.1.4.1.4526.100.8.2.4.1.1.5	IpAddress	read-only	IP Address of Access Point to which cleint is connected.
MAC wcClientApMac	1.3.6.1.4.1.4526.100.8.2.4.1.1.6	MacAddress	read-only	MAC address of Access Point to which cleint is connected.
STR wcClientBssid	1.3.6.1.4.1.4526.100.8.2.4.1.1.7	DisplayString	read-only	Brodcast SSID of Access Point.
STR wcClientSsid	1.3.6.1.4.1.4526.100.8.2.4.1.1.8	DisplayString	read-only	SSID of Access Point.
wcClientDetailsTable	1.3.6.1.4.1.4526.100.8.2.4.2		not-accessible	Detailed information about the clients connected to Access Points managed by WC7520.
wcClientDetailsEntry	1.3.6.1.4.1.4526.100.8.2.4.2.1		not-accessible	A row describing detailed information about each client.
MAC wcClientDetailsMac	1.3.6.1.4.1.4526.100.8.2.4.2.1.1	MacAddress	read-only	MAC address of the client.
STR wcClientDetailsAp	1.3.6.1.4.1.4526.100.8.2.4.2.1.2	DisplayString	read-only	Name of Access Point to which client is connected.
STR wcClientDetailsBssid	1.3.6.1.4.1.4526.100.8.2.4.2.1.3	DisplayString	read-only	Bssid of the client.
STR wcClientDetailsFrequency	1.3.6.1.4.1.4526.100.8.2.4.2.1.4	DisplayString	read-only	Frequent band of client.
STR wcClientDetailsAuth	1.3.6.1.4.1.4526.100.8.2.4.2.1.5	DisplayString	read-only	Authentication method.
STR wcClientDetailsCipher	1.3.6.1.4.1.4526.100.8.2.4.2.1.6	DisplayString	read-only	Cleint cipher
I32 wcClientDetailsAid	1.3.6.1.4.1.4526.100.8.2.4.2.1.7	Integer32	read-only	Client Aid
I32 wcClientDetailsRssi	1.3.6.1.4.1.4526.100.8.2.4.2.1.8	Integer32	read-only	Clients RSSI
I32 wcClientDetailsTxPower	1.3.6.1.4.1.4526.100.8.2.4.2.1.9	Integer32	read-only	Client transmit power
STR wcClientDetailsTxRate	1.3.6.1.4.1.4526.100.8.2.4.2.1.10	DisplayString	read-only	Client transmited data rate.
I32 wcClientDetailsTxBytes	1.3.6.1.4.1.4526.100.8.2.4.2.1.11	Integer32	read-only	Client transmited number of bytes.
STR wcClientDetailsRxRate	1.3.6.1.4.1.4526.100.8.2.4.2.1.12	DisplayString	read-only	Client received data rate.
I32 wcClientDetailsRxBytes	1.3.6.1.4.1.4526.100.8.2.4.2.1.13	Integer32	read-only	Client received number of bytes.
I32 wcClientDetailsTxPackets	1.3.6.1.4.1.4526.100.8.2.4.2.1.14	Integer32	read-only	Client transmitted number of bytes
I32 wcClientDetailsRxPackets	1.3.6.1.4.1.4526.100.8.2.4.2.1.15	Integer32	read-only	Client received number of packets
wcProfiles	1.3.6.1.4.1.4526.100.8.2.5
wcProfileGroupsTable	1.3.6.1.4.1.4526.100.8.2.5.1		not-accessible	List of profile groups.
wcProfileGroupsEntry	1.3.6.1.4.1.4526.100.8.2.5.1.1		read-create	A row describing a profile-group.
I32 wcProfileGroupGroupIdx	1.3.6.1.4.1.4526.100.8.2.5.1.1.1	Integer32	not-accessible	Profile group index.
STR wcProfileGroupName	1.3.6.1.4.1.4526.100.8.2.5.1.1.2	DisplayString	read-only	Name of profile-group
I32 wcProfileGroupBgProfiles	1.3.6.1.4.1.4526.100.8.2.5.1.1.3	Integer32	read-only	Number of 802.11b/bg/ng profiles.
I32 wcProfileGroupAProfiles	1.3.6.1.4.1.4526.100.8.2.5.1.1.4	Integer32	read-only	Number of 802.11a/na profiles.
ROW wcProfileGroupsRowStatus	1.3.6.1.4.1.4526.100.8.2.5.1.1.5	RowStatus	read-create	active(1) - Default value of row status. createAndGo(4) - To create a new profile group. group-index must be provided to add a new profile group. Note: After creation of profile-group, group-index can be different from what is provided. destroy(6) - To delete a profile group.
wcProfilesTable	1.3.6.1.4.1.4526.100.8.2.5.2		not-accessible	List of all the profiles.
wcProfilesEntry	1.3.6.1.4.1.4526.100.8.2.5.2.1		read-create	A row describing a profile. A profile is identified by its group-index, radio-mode, and profile-index.
I32 wcProfilesGroupIdx	1.3.6.1.4.1.4526.100.8.2.5.2.1.1	Integer32	not-accessible	Profile group index to which this profile belongs. for basic group index=0.
STR wcProfilesRadioMode	1.3.6.1.4.1.4526.100.8.2.5.2.1.2	DisplayString	not-accessible	Profile radio mode, one of 802.11b/bg/ng or 802.11a/na.
I32 wcProfilesIdx	1.3.6.1.4.1.4526.100.8.2.5.2.1.3	Integer32	not-accessible	Profile index which identifies a profile in a group.
STR wcProfilesName	1.3.6.1.4.1.4526.100.8.2.5.2.1.4	DisplayString	read-write	Profile name.
STR wcProfilesSsid	1.3.6.1.4.1.4526.100.8.2.5.2.1.5	DisplayString	read-write	SSID of profile.
INT wcProfilesBssid	1.3.6.1.4.1.4526.100.8.2.5.2.1.6	INTEGER	read-write	enable/disable broadcast of SSID.
INT wcProfilesAuthentication	1.3.6.1.4.1.4526.100.8.2.5.2.1.7	INTEGER	read-write	Authentication type.
INT wcProfilesEncryption	1.3.6.1.4.1.4526.100.8.2.5.2.1.8	INTEGER	read-write	Encryption type.
I32 wcProfilesKeyIndex	1.3.6.1.4.1.4526.100.8.2.5.2.1.9	Integer32	read-write	Index of key used out of following four keys.
STR wcProfilesKey1	1.3.6.1.4.1.4526.100.8.2.5.2.1.10	DisplayString	read-write	key 1
STR wcProfilesKey2	1.3.6.1.4.1.4526.100.8.2.5.2.1.11	DisplayString	read-write	key 2
STR wcProfilesKey3	1.3.6.1.4.1.4526.100.8.2.5.2.1.12	DisplayString	read-write	key 3
STR wcProfilesKey4	1.3.6.1.4.1.4526.100.8.2.5.2.1.13	DisplayString	read-write	key 4
INT wcProfilesClientSepration	1.3.6.1.4.1.4526.100.8.2.5.2.1.14	INTEGER	read-write	enable/disable client seperation.
I32 wcProfilesVlan	1.3.6.1.4.1.4526.100.8.2.5.2.1.15	Integer32	read-write	Vlan
I32 wcProfilesAuthServerGroup	1.3.6.1.4.1.4526.100.8.2.5.2.1.16	Integer32	read-write	Index of Authetication server group used for this profile.
I32 wcProfilesAclGroup	1.3.6.1.4.1.4526.100.8.2.5.2.1.17	Integer32	read-write	Index of ACL group used for this profile.
INT wcProfilesCaptivePortal	1.3.6.1.4.1.4526.100.8.2.5.2.1.18	INTEGER	read-write	enable/disable captive portal.
INT wcProfilesWiFiMultimedia	1.3.6.1.4.1.4526.100.8.2.5.2.1.19	INTEGER	read-write	enable/disable WiFi Multimedia.
INT wcProfilesWiFiMultimediaPowerSave	1.3.6.1.4.1.4526.100.8.2.5.2.1.20	INTEGER	read-write	enable/disable WiFi Multimedia Powersave.
ROW wcProfilesRowStatus	1.3.6.1.4.1.4526.100.8.2.5.2.1.21	RowStatus	read-create	Row Status is used to apply modified profile configuration, create and destroy a new profile. active(1) - Indicates there is no modifications pending for commit for this profile. notReady(3) - Indicates that some columns in the row are modified and not yet applied. send active(1) to apply modified configurations. createAndGo(4) - To create a new profile. group-index, radio-mode and profile-index must be provided to add a new profile. Note: After creation of a profile, profile-index can be different from what is provided. destroy(6) - To delete a profile. notInService(2), createAndWait(5) - not valid for this table.
wcNotifications	1.3.6.1.4.1.4526.100.8.2.20
wcNotificationPrefix	1.3.6.1.4.1.4526.100.8.2.20.0
wcNotificationObjects	1.3.6.1.4.1.4526.100.8.2.20.3

RFC description

Manages Netgear WC7520 wireless controller with system settings, country configuration, and 802.11 network management.

Start monitoring NETGEAR WC7520 ProSafe wireless LAN controller (controller state/network-config/trap status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WC7520-MIB