All MIBs › F3-CONNECTGUARD-MIB
Organization: ADVA Optical Networking
Last Updated: 2016-07-11
Description: F3-CONNECTGUARD-MIB module
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is F3-CONNECTGUARD-MIB?
F3-CONNECTGUARD-MIB is a vendor-specific SNMP module from ADVA Optical Networking for the FSP150CM/CC family of carrier Ethernet access devices, covering the 'Connect Guard' encryption/security feature for Ethernet flows. It exposes configuration and status data for encrypted flow instances, including cipher suite selection, key exchange profiles, and VLAN tagging used for the key-exchange control channel. Monitoring-wise it is squarely a hardware/software status MIB: it reports per-flow administrative, operational, and secondary states so an operator can see whether an encrypted flow on a given card/port is actually passing traffic or has failed to establish a security association, plus performance counters tied to those flows. It builds on the F3 platform's general flow/interface model rather than any external standards MIB. It is typically deployed by carriers and enterprises using ADVA FSP150 metro/access transport boxes to protect point-to-point or point-to-multipoint Ethernet services with MACsec-like link encryption. Engineers can download the F3-CONNECTGUARD-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in F3-CONNECTGUARD-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ADVA FSP150CM/CC carrier Ethernet access/aggregation device
Monitoring Examples
An operator would poll f3ConnectGuardFlowTable/f3ConnectGuardFlowEntry, indexed by f3ConnectGuardFlowIndex, to check f3ConnectGuardFlowOperationalState and f3ConnectGuardFlowSecondaryState for each secured flow; a flow stuck in a non-operational secondary state while f3ConnectGuardFlowAdminState shows enabled typically indicates a key-exchange or cipher mismatch. f3ConnectGuardFlowCipherSuite and f3ConnectGuardFlowKeyExchangeProfile reveal which encryption parameters are configured, while f3ConnectGuardFlowEgressInterface ties the flow to a physical port for fault isolation. The f3ConnectGuardFlowKeyExchangeFrameOuterVlanEnabled/Id objects let an admin confirm the key-exchange control frames are tagged correctly when the secured flow rides a tagged interface.
What Can Be Monitored
- encrypted flow admin state
- encrypted flow operational state
- encrypted flow secondary state
- cipher suite in use
- key exchange profile
- key exchange VLAN tagging
- egress interface for secured flow
This MIB depends on
Related MIBs
Imported Objects
From ADVA-MIB
| fsp150cm | OBJECT-IDENTITY |
From CM-COMMON-MIB
| AdminState | |
| AfpTagControl | |
| CmPmBinAction | |
| CmPmIntervalType | |
| EthernetMediaType | |
| EthernetPortSpeed | |
| F3DisplayString | |
| OperationalState | |
| PerfCounter64 | |
| PriorityMapMode | |
| SecondaryState | |
| SfpConnectorValue | |
| SfpMediaType | |
| TrafficDirection | |
| VlanEthertype | |
| VlanId | |
| VlanPriority | |
| VlanTagType |
From CM-ENTITY-MIB
| f3UsbHostIndex | OBJECT-TYPE |
| neIndex | OBJECT-TYPE |
| networkElementEntry | OBJECT-TYPE |
| shelfIndex | OBJECT-TYPE |
| slotIndex | OBJECT-TYPE |
From CM-FACILITY-MIB
| cmFlowEntry | OBJECT-TYPE |
From ENTITY-MIB
| PhysicalIndex |
From F3-FPM-MIB
| f3AccFlowPointEntry | OBJECT-TYPE |
| f3NetFlowPointEntry | OBJECT-TYPE |
From IEEE8021-SECY-MIB
| SecySCI |
From IF-MIB
| InterfaceIndex | |
| ifIndex | OBJECT-TYPE |
From IPV6-TC
| Ipv6Address |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| MacAddress | |
| RowStatus | |
| StorageType | |
| TEXTUAL-CONVENTION | |
| TimeStamp | |
| TruthValue | |
| VariablePointer |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| f3ConnectGuardMIB | 1.3.6.1.4.1.2544.1.12.36 | This module defines the Connect Guard MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking. | ||
| f3ConnectGuardConfigObjects | 1.3.6.1.4.1.2544.1.12.36.1 | |||
| f3ConnectGuardFlowTable | 1.3.6.1.4.1.2544.1.12.36.1.1 | not-accessible | A list of entries for the Connect Guard flow. | |
| f3ConnectGuardFlowEntry | 1.3.6.1.4.1.2544.1.12.36.1.1.1 | not-accessible | A conceptual row in the f3ConnectGuardFlowTable. | |
| I32 f3ConnectGuardFlowIndex | 1.3.6.1.4.1.2544.1.12.36.1.1.1.1 | Integer32 | not-accessible | The index of the Connect Guard flow entry. |
| CIP f3ConnectGuardFlowCipherSuite | 1.3.6.1.4.1.2544.1.12.36.1.1.1.2 | CipherSuiteType | read-write | This object defines the cipher suite type for this flow. |
| ADM f3ConnectGuardFlowAdminState | 1.3.6.1.4.1.2544.1.12.36.1.1.1.3 | AdminState | read-write | This object represents the Administrative State of the Flow. |
| SEC f3ConnectGuardFlowSecondaryState | 1.3.6.1.4.1.2544.1.12.36.1.1.1.4 | SecondaryState | read-only | This object represents the Secondary State of the Flow. |
| OPE f3ConnectGuardFlowOperationalState | 1.3.6.1.4.1.2544.1.12.36.1.1.1.5 | OperationalState | read-only | This object represents the Operational State of the Flow. |
| NUM f3ConnectGuardFlowEgressInterface | 1.3.6.1.4.1.2544.1.12.36.1.1.1.6 | VariablePointer | read-write | This object defines the Connect Guard Flow egress interface. |
| NUM f3ConnectGuardFlowKeyExchangeProfile | 1.3.6.1.4.1.2544.1.12.36.1.1.1.7 | VariablePointer | read-write | This object defines the key exchange profile to be used for the secure flow. |
| KEY f3ConnectGuardFlowKeyExchangeFrameTagControl | 1.3.6.1.4.1.2544.1.12.36.1.1.1.8 | KeyExchangeFrameTagControl | read-write | This object defines the key exchange frame tag mode. |
| T/F f3ConnectGuardFlowKeyExchangeFrameOuterVlanEnabled | 1.3.6.1.4.1.2544.1.12.36.1.1.1.9 | TruthValue | read-write | This object controls the key exchange frame Outer Vlan. |
| VLA f3ConnectGuardFlowKeyExchangeFrameOuterVlanId | 1.3.6.1.4.1.2544.1.12.36.1.1.1.10 | VlanId | read-write | This object defines the key exchange frame outer Vlan ID |
| VLA f3ConnectGuardFlowKeyExchangeFrameOuterVlanPriority | 1.3.6.1.4.1.2544.1.12.36.1.1.1.11 | VlanPriority | read-write | This object defines the key exchange frame outer Vlan Priority. |
| T/F f3ConnectGuardFlowKeyExchangeFrameInner1VlanEnabled | 1.3.6.1.4.1.2544.1.12.36.1.1.1.12 | TruthValue | read-write | This object controls the key exchange frame Inner Vlan. |
| VLA f3ConnectGuardFlowKeyExchangeFrameInner1VlanId | 1.3.6.1.4.1.2544.1.12.36.1.1.1.13 | VlanId | read-write | This object defines the key exchange frame Inner Vlan ID |
| VLA f3ConnectGuardFlowKeyExchangeFrameInner1VlanPriority | 1.3.6.1.4.1.2544.1.12.36.1.1.1.14 | VlanPriority | read-write | This object defines the key exchange frame Inner Vlan Priority. |
| T/F f3ConnectGuardFlowKeyExchangeFrameInner2VlanEnabled | 1.3.6.1.4.1.2544.1.12.36.1.1.1.15 | TruthValue | read-write | This object controls the key exchange frame Inner most Vlan. |
| VLA f3ConnectGuardFlowKeyExchangeFrameInner2VlanId | 1.3.6.1.4.1.2544.1.12.36.1.1.1.16 | VlanId | read-write | This object defines the key exchange frame Inner most Vlan ID |
| VLA f3ConnectGuardFlowKeyExchangeFrameInner2VlanPriority | 1.3.6.1.4.1.2544.1.12.36.1.1.1.17 | VlanPriority | read-write | This object defines the key exchange frame Inner most Vlan Priority. |
| I32 f3ConnectGuardFlowKeyExchangeInterval | 1.3.6.1.4.1.2544.1.12.36.1.1.1.18 | Integer32 | read-write | This object defines the key exchange interval value, in one minute increment |
| I32 f3ConnectGuardFlowTagsClear | 1.3.6.1.4.1.2544.1.12.36.1.1.1.19 | Integer32 | read-write | This object defines the number of tags to by pass in encryption |
| STO f3ConnectGuardFlowStorageType | 1.3.6.1.4.1.2544.1.12.36.1.1.1.20 | StorageType | read-create | The type of storage configured for this entry. |
| ROW f3ConnectGuardFlowRowStatus | 1.3.6.1.4.1.2544.1.12.36.1.1.1.21 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3ConnectGuardFlowRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3ConnectGuardFlowRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The f3ConnectGuardFlowRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| U32 f3ConnectGuardFlowKeyXchgFailsCounts | 1.3.6.1.4.1.2544.1.12.36.1.1.1.22 | Unsigned32 | read-only | This object counts number of times key exchange protocol failed. |
| CON f3ConnectGuardFlowAction | 1.3.6.1.4.1.2544.1.12.36.1.1.1.23 | ConnectGuardFlowActionType | read-write | This object describe operation on the Connect Guard flow. |
| T/F f3ConnectGuardFlowReplayProtectionEnabled | 1.3.6.1.4.1.2544.1.12.36.1.1.1.24 | TruthValue | read-write | This object can be used to enable/disable replay proctection. |
| U32 f3ConnectGuardFlowReplayProtectionWindow | 1.3.6.1.4.1.2544.1.12.36.1.1.1.25 | Unsigned32 | read-write | This object defines replay proctection window value. |
| T/F f3ConnectGuardFlowRemoteMacAddrEnabled | 1.3.6.1.4.1.2544.1.12.36.1.1.1.26 | TruthValue | read-write | This object can be used to enable/disable remote MAC Address that used as the destination MAC address in the key exchange protocol packets. |
| MAC f3ConnectGuardFlowRemoteMacAddr | 1.3.6.1.4.1.2544.1.12.36.1.1.1.27 | MacAddress | read-write | This object defines remote MAC Address value. |
| NUM f3ConnectGuardFlowAssociatedMep | 1.3.6.1.4.1.2544.1.12.36.1.1.1.28 | VariablePointer | read-write | This object speicify the mep object to use as trigger for key exchange failure |
| STR f3ConnectGuardFlowAlias | 1.3.6.1.4.1.2544.1.12.36.1.1.1.29 | DisplayString | read-write | This object speicify the connect guard flow's alias. |
| U32 f3ConnectGuardFlowKeyExchangeFrameOuterVlanEtherType | 1.3.6.1.4.1.2544.1.12.36.1.1.1.30 | Unsigned32 | read-create | Outer vlan ether type used in key exchange. |
| U32 f3ConnectGuardFlowKeyExchangeFrameInner1VlanEtherType | 1.3.6.1.4.1.2544.1.12.36.1.1.1.31 | Unsigned32 | read-create | Inner1 vlan ether type used in key exchange. |
| U32 f3ConnectGuardFlowKeyExchangeFrameInner2VlanEtherType | 1.3.6.1.4.1.2544.1.12.36.1.1.1.32 | Unsigned32 | read-create | Inner2 vlan ether type used in key exchange. |
| NUM f3ConnectGuardFlowKeyInjectFlowPoint | 1.3.6.1.4.1.2544.1.12.36.1.1.1.33 | VariablePointer | read-create | Pointer to a flowpoint used to up inject key exchange frames in case of ERP. |
| f3ConnectGuardKeyExchangeProfileTable | 1.3.6.1.4.1.2544.1.12.36.1.2 | not-accessible | A list of entries for the key exchange profile. | |
| f3ConnectGuardKeyExchangeProfileEntry | 1.3.6.1.4.1.2544.1.12.36.1.2.1 | not-accessible | A conceptual row in the f3ConnectGuardKeyExchangeProfileTable. | |
| I32 f3ConnectGuardKeyExchangeProfileIndex | 1.3.6.1.4.1.2544.1.12.36.1.2.1.1 | Integer32 | not-accessible | The index of the key exchange profile. |
| STR f3ConnectGuardKeyExchangeProfileName | 1.3.6.1.4.1.2544.1.12.36.1.2.1.2 | DisplayString | read-write | The name of this profile. |
| STR f3ConnectGuardKeyExchangeProfileUserId | 1.3.6.1.4.1.2544.1.12.36.1.2.1.3 | DisplayString | read-only | The user name who created this profile. It is automatically set by the system. |
| CON f3ConnectGuardKeyExchangeProfileMode | 1.3.6.1.4.1.2544.1.12.36.1.2.1.4 | ConnectGuardKeyExMode | read-write | The key exchange mode. |
| STR f3ConnectGuardKeyExchangeProfileAuthPassword | 1.3.6.1.4.1.2544.1.12.36.1.2.1.5 | DisplayString | read-write | The authentication password for this profile. |
| DIF f3ConnectGuardKeyExchangeProfileDiffieHellmanKeyPairLen | 1.3.6.1.4.1.2544.1.12.36.1.2.1.6 | DiffieHellmanKeyPairLength | read-write | The Diffie-Hellman key pair length for this profile. |
| STO f3ConnectGuardKeyExchangeProfileStorageType | 1.3.6.1.4.1.2544.1.12.36.1.2.1.7 | StorageType | read-create | The type of storage configured for this entry. |
| ROW f3ConnectGuardKeyExchangeProfileRowStatus | 1.3.6.1.4.1.2544.1.12.36.1.2.1.8 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3ConnectGuardKeyExchangeProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3ConnectGuardKeyExchangeProfileRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The f3ConnectGuardKeyExchangeProfileRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| f3ConnectGuardTxSCTable | 1.3.6.1.4.1.2544.1.12.36.1.3 | not-accessible | A list of entries for the Connect Guard TX SC. | |
| f3ConnectGuardTxSCEntry | 1.3.6.1.4.1.2544.1.12.36.1.3.1 | not-accessible | A conceptual row in the f3ConnectGuardTxSCTable. | |
| I32 f3ConnectGuardTxSCIndex | 1.3.6.1.4.1.2544.1.12.36.1.3.1.1 | Integer32 | not-accessible | The index of the Connect Guard TX SC entry. |
| SEC f3ConnectGuardTxSCI | 1.3.6.1.4.1.2544.1.12.36.1.3.1.2 | SecySCI | read-only | The index of the Connect Guard TX SCI. |
| SCS f3ConnectGuardTxScState | 1.3.6.1.4.1.2544.1.12.36.1.3.1.3 | ScSaState | read-only | This object defines the Tx Sc State. |
| I32 f3ConnectGuardCurrentTxSa | 1.3.6.1.4.1.2544.1.12.36.1.3.1.4 | Integer32 | read-only | This object defines the AN number of current Tx SA. -1 means no current Tx SA. |
| I32 f3ConnectGuardPreviousTxSa | 1.3.6.1.4.1.2544.1.12.36.1.3.1.5 | Integer32 | read-only | This object defines the AN number of previous Tx SA. -1 means no previous Tx SA. |
| DAT f3ConnectGuardTxScCreateTime | 1.3.6.1.4.1.2544.1.12.36.1.3.1.6 | DateAndTime | read-only | This object defines the system time when the SC was created. |
| DAT f3ConnectGuardTxScStartTime | 1.3.6.1.4.1.2544.1.12.36.1.3.1.7 | DateAndTime | read-only | The system time when this transmitting SC last started transmitting Connect Guard frames. |
| DAT f3ConnectGuardTxScStopTime | 1.3.6.1.4.1.2544.1.12.36.1.3.1.8 | DateAndTime | read-only | The system time when this transmitting SC last stopped transmitting Connect Guard frames. |
| f3ConnectGuardRxSCTable | 1.3.6.1.4.1.2544.1.12.36.1.4 | not-accessible | A list of entries for the Connect Guard RX SC. | |
| f3ConnectGuardRxSCEntry | 1.3.6.1.4.1.2544.1.12.36.1.4.1 | not-accessible | A conceptual row in the f3ConnectGuardRxSCTable. | |
| I32 f3ConnectGuardRxSCIndex | 1.3.6.1.4.1.2544.1.12.36.1.4.1.1 | Integer32 | not-accessible | The RX SC number. |
| SEC f3ConnectGuardRxSCI | 1.3.6.1.4.1.2544.1.12.36.1.4.1.2 | SecySCI | read-only | The SCI value, includes 8 bytes. |
| SCS f3ConnectGuardRxScState | 1.3.6.1.4.1.2544.1.12.36.1.4.1.3 | ScSaState | read-only | The state of the receiving SC in the SecY. inUse(1) : means any of SAs for this SC is in use. notInUse(2) : means no SAs for this SC is in use. |
| I32 f3ConnectGuardCurrentRxSa | 1.3.6.1.4.1.2544.1.12.36.1.4.1.4 | Integer32 | read-only | The AN number of current Rx SA, -1 means no current Rx SA. |
| DAT f3ConnectGuardRxScCreateTime | 1.3.6.1.4.1.2544.1.12.36.1.4.1.5 | DateAndTime | read-only | The system time when this receiving SC was created. |
| DAT f3ConnectGuardRxScStartTime | 1.3.6.1.4.1.2544.1.12.36.1.4.1.6 | DateAndTime | read-only | The system time when this receiving SC last started receiving ConnectGuard frames. |
| DAT f3ConnectGuardRxScStopTime | 1.3.6.1.4.1.2544.1.12.36.1.4.1.7 | DateAndTime | read-only | The system time when this receiving SC last stopped receiving ConnectGuard frames. |
| f3ConnectGuardTxSATable | 1.3.6.1.4.1.2544.1.12.36.1.5 | not-accessible | A table for providing information about the status of each transmitting SA supported by the MAC security entity. | |
| f3ConnectGuardTxSAEntry | 1.3.6.1.4.1.2544.1.12.36.1.5.1 | not-accessible | An entry containing transmitting SA management information applicable to a particular SA. | |
| U32 f3ConnectGuardTxSAIndex | 1.3.6.1.4.1.2544.1.12.36.1.5.1.1 | Unsigned32 | not-accessible | The association number (AN) for identifying a transmitting SA. |
| SCS f3ConnectGuardTxSAState | 1.3.6.1.4.1.2544.1.12.36.1.5.1.2 | ScSaState | read-only | The current status of the transmitting SA. inUse(1) : means this SA is in use. notInUse(2) : means this SA is not in use. |
| U32 f3ConnectGuardTxSANextPN | 1.3.6.1.4.1.2544.1.12.36.1.5.1.3 | Unsigned32 | read-only | The next packet number (PN) that will be used in transmitting ConnectGuard frames in the SA. |
| T/F f3ConnectGuardTxSASAKUnchanged | 1.3.6.1.4.1.2544.1.12.36.1.5.1.4 | TruthValue | read-only | A reference to an SAK that is unchanged for the life of the transmitting SA. |
| DAT f3ConnectGuardTxSACreatedTime | 1.3.6.1.4.1.2544.1.12.36.1.5.1.5 | DateAndTime | read-only | The system time when this transmitting SA was created. |
| DAT f3ConnectGuardTxSAStartedTime | 1.3.6.1.4.1.2544.1.12.36.1.5.1.6 | DateAndTime | read-only | The system time when this transmitting SA last started transmitting ConnectGuard frames. |
| DAT f3ConnectGuardTxSAStoppedTime | 1.3.6.1.4.1.2544.1.12.36.1.5.1.7 | DateAndTime | read-only | The system time when this transmitting SA last stopped transmitting ConnectGuard frames. |
| f3ConnectGuardRxSATable | 1.3.6.1.4.1.2544.1.12.36.1.6 | not-accessible | A table for providing information about the status of each transmitting SA supported by the MAC security entity. | |
| f3ConnectGuardRxSAEntry | 1.3.6.1.4.1.2544.1.12.36.1.6.1 | not-accessible | An entry containing transmitting SA management information applicable to a particular SA. | |
| U32 f3ConnectGuardRxSAIndex | 1.3.6.1.4.1.2544.1.12.36.1.6.1.1 | Unsigned32 | not-accessible | The association number (AN) for identifying a transmitting SA. |
| SCS f3ConnectGuardRxSAState | 1.3.6.1.4.1.2544.1.12.36.1.6.1.2 | ScSaState | read-only | The current status of the transmitting SA. inUse(1) : means this SA is in use. notInUse(2) : means this SA is not in use. |
| U32 f3ConnectGuardRxSANextPN | 1.3.6.1.4.1.2544.1.12.36.1.6.1.3 | Unsigned32 | read-only | The next packet number (PN) that will be used in transmitting ConnectGuard frames in the SA. |
| T/F f3ConnectGuardRxSASAKUnchanged | 1.3.6.1.4.1.2544.1.12.36.1.6.1.4 | TruthValue | read-only | A reference to an SAK that is unchanged for the life of the transmitting SA. |
| DAT f3ConnectGuardRxSACreatedTime | 1.3.6.1.4.1.2544.1.12.36.1.6.1.5 | DateAndTime | read-only | The system time when this transmitting SA was created. |
| DAT f3ConnectGuardRxSAStartedTime | 1.3.6.1.4.1.2544.1.12.36.1.6.1.6 | DateAndTime | read-only | The system time when this transmitting SA last started transmitting ConnectGuard frames. |
| DAT f3ConnectGuardRxSAStoppedTime | 1.3.6.1.4.1.2544.1.12.36.1.6.1.7 | DateAndTime | read-only | The system time when this transmitting SA last stopped transmitting ConnectGuard frames. |
| f3FlowExtConnectGuardTable | 1.3.6.1.4.1.2544.1.12.36.1.7 | not-accessible | A list of entries corresponding to Flow for configuration purposes. This table has been deprecated. Attributes have been moved to cmFlowTable. | |
| f3FlowExtConnectGuardEntry | 1.3.6.1.4.1.2544.1.12.36.1.7.1 | not-accessible | A conceptual row in the f3FlowExtConnectGuardTable. | |
| NUM f3FlowRefConnectGuardFlowObject | 1.3.6.1.4.1.2544.1.12.36.1.7.1.1 | VariablePointer | read-write | This object specifies Mac Sec flow object OID. |
| T/F f3FlowSecureBlockingEnabled | 1.3.6.1.4.1.2544.1.12.36.1.7.1.2 | TruthValue | read-write | This object can be used to enable/disable secure block. |
| FLO f3FlowSecureState | 1.3.6.1.4.1.2544.1.12.36.1.7.1.3 | FlowSecureState | read-only | This object specifies the secure state of this flow. |
| f3ConnectGuardConfigScalars | 1.3.6.1.4.1.2544.1.12.36.1.8 | |||
| T/F f3ConnectGuardRestoreFactoryApproved | 1.3.6.1.4.1.2544.1.12.36.1.8.1 | TruthValue | read-write | Crypto user can use this object to enable/disable restore factory defaults on the NID. |
| STR f3ConnectGuardSoftwareVersionApproved | 1.3.6.1.4.1.2544.1.12.36.1.8.2 | DisplayString | read-write | This object describes the software version that crypto user approved for upgrade. |
| T/F f3ConnectGuardSoftwareInstallApproved | 1.3.6.1.4.1.2544.1.12.36.1.8.3 | TruthValue | read-write | Crypto user can use this object to enable/disable sofware install on the NID. |
| T/F f3ConnectGuardRestoreDatabaseApproved | 1.3.6.1.4.1.2544.1.12.36.1.8.4 | TruthValue | read-write | Crypto user can use this object to enable/disable restore database on the NID. |
| T/F f3ConnectGuardConfigFileLoadApproved | 1.3.6.1.4.1.2544.1.12.36.1.8.5 | TruthValue | read-write | Crypto user can use this object to enable/disable config file operation on the NID. |
| T/F f3ConnectGuardCryptoPasswordControl | 1.3.6.1.4.1.2544.1.12.36.1.8.6 | TruthValue | read-write | A system level attribute to disable/enable crypto password request when changing ConnectGuard attributes. |
| f3ConnectGuardPasswordScalars | 1.3.6.1.4.1.2544.1.12.36.1.9 | |||
| STR f3ConnectGuardCryptoPassword | 1.3.6.1.4.1.2544.1.12.36.1.9.1 | DisplayString | read-write | This is the second level password for the crypto user. This password is required to modify ConnectGuard objects. Every set request that involves a ConnectGuard object should include this variable with correct password value to succeed. |
| f3ConnectGuardPerformanceObjects | 1.3.6.1.4.1.2544.1.12.36.2 | |||
| f3ConnectGuardFlowStatsTable | 1.3.6.1.4.1.2544.1.12.36.2.1 | not-accessible | A collection of Mac Sec Flow statistics. These reflect the current data. | |
| f3ConnectGuardFlowStatsEntry | 1.3.6.1.4.1.2544.1.12.36.2.1.1 | not-accessible | A conceptual row in the f3ConnectGuardFlowStatsTable. Entries exist in this table for each Connect Guard Flow. | |
| I32 f3ConnectGuardFlowStatsIndex | 1.3.6.1.4.1.2544.1.12.36.2.1.1.1 | Integer32 | not-accessible | An arbitrary integer index value used to uniquely identify this Connect Guard Flow statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min |
| NUM f3ConnectGuardFlowStatsIntervalType | 1.3.6.1.4.1.2544.1.12.36.2.1.1.2 | CmPmIntervalType | read-only | Indicates the type of collection, i.e. whether it is 15 Min, 1 Day or rollover. |
| T/F f3ConnectGuardFlowStatsValid | 1.3.6.1.4.1.2544.1.12.36.2.1.1.3 | TruthValue | read-only | Indicates the validity of the bin. |
| CMP f3ConnectGuardFlowStatsAction | 1.3.6.1.4.1.2544.1.12.36.2.1.1.4 | CmPmBinAction | read-write | Allows the operator to clear the bin. |
| NUM f3ConnectGuardFlowStatsTxUntaggedPkts | 1.3.6.1.4.1.2544.1.12.36.2.1.1.5 | PerfCounter64 | read-only | The number of transmitted packets without the MAC security tag (SecTAG). |
| NUM f3ConnectGuardFlowStatsTxTooLongPkts | 1.3.6.1.4.1.2544.1.12.36.2.1.1.6 | PerfCounter64 | read-only | The number of transmitted packets discarded because the packet length is greater than the ifMtu of the Common Port interface. |
| NUM f3ConnectGuardFlowStatsRxUntaggedPkts | 1.3.6.1.4.1.2544.1.12.36.2.1.1.7 | PerfCounter64 | read-only | The number of received packets without the MAC security tag(SecTAG). |
| NUM f3ConnectGuardFlowStatsRxNotagPkts | 1.3.6.1.4.1.2544.1.12.36.2.1.1.8 | PerfCounter64 | read-only | The number of received packets discarded without the MAC security tag (SecTAG). |
| NUM f3ConnectGuardFlowStatsRxBadtagPkts | 1.3.6.1.4.1.2544.1.12.36.2.1.1.9 | PerfCounter64 | read-only | The number of received packets discarded with an invalid SecTAG or a zero value PN or an invalid ICV. |
| NUM f3ConnectGuardFlowStatsRxUnknownSCIPkts | 1.3.6.1.4.1.2544.1.12.36.2.1.1.10 | PerfCounter64 | read-only | The number of received packets with unknown SCI. |
| NUM f3ConnectGuardFlowStatsRxNoSCIPkts | 1.3.6.1.4.1.2544.1.12.36.2.1.1.11 | PerfCounter64 | read-only | The number of received packets discarded with unknown SCI information. |
| NUM f3ConnectGuardFlowStatsRxOverrunPkts | 1.3.6.1.4.1.2544.1.12.36.2.1.1.12 | PerfCounter64 | read-only | The number of packets discarded because the number of received packets exceeded the cryptographic performance capabilities. |
| f3ConnectGuardFlowHistoryTable | 1.3.6.1.4.1.2544.1.12.36.2.2 | not-accessible | A collection of Connect Guard Flow history statistics. These reflect the history data. | |
| f3ConnectGuardFlowHistoryEntry | 1.3.6.1.4.1.2544.1.12.36.2.2.1 | not-accessible | A conceptual row in the f3ConnectGuardFlowHistoryTable. Entries exist in this table for each Connect Guard Flow. | |
| I32 f3ConnectGuardFlowHistoryIndex | 1.3.6.1.4.1.2544.1.12.36.2.2.1.1 | Integer32 | not-accessible | An arbitrary integer index value used to uniquely identify this Connect Guard Flow statistics entry. |
| DAT f3ConnectGuardFlowHistoryTime | 1.3.6.1.4.1.2544.1.12.36.2.2.1.2 | DateAndTime | read-only | Indicates the time of history bin creation. |
| T/F f3ConnectGuardFlowHistoryValid | 1.3.6.1.4.1.2544.1.12.36.2.2.1.3 | TruthValue | read-only | Indicates the validity of the bin. |
| CMP f3ConnectGuardFlowHistoryAction | 1.3.6.1.4.1.2544.1.12.36.2.2.1.4 | CmPmBinAction | read-write | Allows the operator to clear the bin. |
| NUM f3ConnectGuardFlowHistoryTxUntaggedPkts | 1.3.6.1.4.1.2544.1.12.36.2.2.1.5 | PerfCounter64 | read-only | The number of transmitted packets without the MAC security tag (SecTAG). |
| NUM f3ConnectGuardFlowHistoryTxTooLongPkts | 1.3.6.1.4.1.2544.1.12.36.2.2.1.6 | PerfCounter64 | read-only | The number of transmitted packets discarded because the packet length is greater than the ifMtu of the Common Port interface. |
| NUM f3ConnectGuardFlowHistoryRxUntaggedPkts | 1.3.6.1.4.1.2544.1.12.36.2.2.1.7 | PerfCounter64 | read-only | The number of received packets without the MAC security tag(SecTAG). |
| NUM f3ConnectGuardFlowHistoryRxNotagPkts | 1.3.6.1.4.1.2544.1.12.36.2.2.1.8 | PerfCounter64 | read-only | The number of received packets discarded without the MAC security tag (SecTAG). |
| NUM f3ConnectGuardFlowHistoryRxBadtagPkts | 1.3.6.1.4.1.2544.1.12.36.2.2.1.9 | PerfCounter64 | read-only | The number of received packets discarded with an invalid SecTAG or a zero value PN or an invalid ICV. |
| NUM f3ConnectGuardFlowHistoryRxUnknownSCIPkts | 1.3.6.1.4.1.2544.1.12.36.2.2.1.10 | PerfCounter64 | read-only | The number of received packets with unknown SCI. |
| NUM f3ConnectGuardFlowHistoryRxNoSCIPkts | 1.3.6.1.4.1.2544.1.12.36.2.2.1.11 | PerfCounter64 | read-only | The number of received packets discarded with unknown SCI information. |
| NUM f3ConnectGuardFlowHistoryRxOverrunPkts | 1.3.6.1.4.1.2544.1.12.36.2.2.1.12 | PerfCounter64 | read-only | The number of packets discarded because the number of received packets exceeded the cryptographic performance capabilities. |
| f3ConnectGuardFlowThresholdTable | 1.3.6.1.4.1.2544.1.12.36.2.3 | not-accessible | A table of entries that allow manageability of Connect Guard Flow Thresholds. | |
| f3ConnectGuardFlowThresholdEntry | 1.3.6.1.4.1.2544.1.12.36.2.3.1 | not-accessible | A conceptual row in the f3PtpAccPortFlowPointThresholdTable. | |
| I32 f3ConnectGuardFlowThresholdIndex | 1.3.6.1.4.1.2544.1.12.36.2.3.1.1 | Integer32 | not-accessible | An index that uniquely identifies an entry in the f3ConnectGuardFlowThresholdTable. |
| NUM f3ConnectGuardFlowThresholdInterval | 1.3.6.1.4.1.2544.1.12.36.2.3.1.2 | CmPmIntervalType | read-only | The interval over which monitored value is sampled and compared with the specified threshold. |
| NUM f3ConnectGuardFlowThresholdVariable | 1.3.6.1.4.1.2544.1.12.36.2.3.1.3 | VariablePointer | read-only | The object identifier of the particular variable to be sampled. |
| U32 f3ConnectGuardFlowThresholdValueLo | 1.3.6.1.4.1.2544.1.12.36.2.3.1.4 | Unsigned32 | read-write | Lower 32 bits of the threshold value. |
| U32 f3ConnectGuardFlowThresholdValueHi | 1.3.6.1.4.1.2544.1.12.36.2.3.1.5 | Unsigned32 | read-write | Higher 32 bits of the threshold value. |
| NUM f3ConnectGuardFlowThresholdMonValue | 1.3.6.1.4.1.2544.1.12.36.2.3.1.6 | PerfCounter64 | read-only | Monitored value corresponding to f3ConnectGuardFlowThresholdVariable. |
| f3ConnectGuardTxSCStatsTable | 1.3.6.1.4.1.2544.1.12.36.2.4 | not-accessible | A collection of Connect Guard TxSC statistics. These reflect the current data. | |
| f3ConnectGuardTxSCStatsEntry | 1.3.6.1.4.1.2544.1.12.36.2.4.1 | not-accessible | A conceptual row in the f3ConnectGuardTxSCStatsTable. Entries exist in this table for each Connect Guard TxSC. | |
| I32 f3ConnectGuardTxSCStatsIndex | 1.3.6.1.4.1.2544.1.12.36.2.4.1.1 | Integer32 | not-accessible | An arbitrary integer index value used to uniquely identify this Connect Guard TX SC statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min |
| NUM f3ConnectGuardTxSCStatsIntervalType | 1.3.6.1.4.1.2544.1.12.36.2.4.1.2 | CmPmIntervalType | read-only | Indicates the type of collection, i.e. whether it is 15 Min, 1 Day or rollover. |
| T/F f3ConnectGuardTxSCStatsValid | 1.3.6.1.4.1.2544.1.12.36.2.4.1.3 | TruthValue | read-only | Indicates the validity of the bin. |
| CMP f3ConnectGuardTxSCStatsAction | 1.3.6.1.4.1.2544.1.12.36.2.4.1.4 | CmPmBinAction | read-write | Allows the operator to clear the bin. |
| NUM f3ConnectGuardTxSCStatsTxProtectedPkts | 1.3.6.1.4.1.2544.1.12.36.2.4.1.5 | PerfCounter64 | read-only | The number of integrity protected but not encrypted packets. |
| NUM f3ConnectGuardTxSCStatsTxEncryptedPkts | 1.3.6.1.4.1.2544.1.12.36.2.4.1.6 | PerfCounter64 | read-only | The number of integrity protected and encrypted packets. |
| NUM f3ConnectGuardTxSCStatsTxOctetsProtected | 1.3.6.1.4.1.2544.1.12.36.2.4.1.7 | PerfCounter64 | read-only | The number of plain text octets that are integrity protected but not encrypted. |
| NUM f3ConnectGuardTxSCStatsTxOctetsEncrypted | 1.3.6.1.4.1.2544.1.12.36.2.4.1.8 | PerfCounter64 | read-only | The number of plain text octets that are integrity protected and encrypted. |
| f3ConnectGuardTxSCHistoryTable | 1.3.6.1.4.1.2544.1.12.36.2.5 | not-accessible | A collection of Connect Guard TxSC history statistics. These reflect the history data. | |
| f3ConnectGuardTxSCHistoryEntry | 1.3.6.1.4.1.2544.1.12.36.2.5.1 | not-accessible | A conceptual row in the f3ConnectGuardTxSCHistoryTable. Entries exist in this table for each Connect Guard TX SC. | |
| I32 f3ConnectGuardTxSCHistoryIndex | 1.3.6.1.4.1.2544.1.12.36.2.5.1.1 | Integer32 | not-accessible | An arbitrary integer index value used to uniquely identify this Connect Guard TxSC statistics entry. |
| DAT f3ConnectGuardTxSCHistoryTime | 1.3.6.1.4.1.2544.1.12.36.2.5.1.2 | DateAndTime | read-only | Indicates the time of history bin creation. |
| T/F f3ConnectGuardTxSCHistoryValid | 1.3.6.1.4.1.2544.1.12.36.2.5.1.3 | TruthValue | read-only | Indicates the validity of the bin. |
| CMP f3ConnectGuardTxSCHistoryAction | 1.3.6.1.4.1.2544.1.12.36.2.5.1.4 | CmPmBinAction | read-write | Allows the operator to clear the bin. |
| NUM f3ConnectGuardTxSCHistoryTxProtectedPkts | 1.3.6.1.4.1.2544.1.12.36.2.5.1.5 | PerfCounter64 | read-only | The number of integrity protected but not encrypted packets. |
| NUM f3ConnectGuardTxSCHistoryTxEncryptedPkts | 1.3.6.1.4.1.2544.1.12.36.2.5.1.6 | PerfCounter64 | read-only | The number of integrity protected and encrypted packets. |
| NUM f3ConnectGuardTxSCHistoryTxOctetsProtected | 1.3.6.1.4.1.2544.1.12.36.2.5.1.7 | PerfCounter64 | read-only | The number of plain text octets that are integrity protected but not encrypted. |
| NUM f3ConnectGuardTxSCHistoryTxOctetsEncrypted | 1.3.6.1.4.1.2544.1.12.36.2.5.1.8 | PerfCounter64 | read-only | The number of plain text octets that are integrity protected and encrypted. |
| f3ConnectGuardTxSCThresholdTable | 1.3.6.1.4.1.2544.1.12.36.2.6 | not-accessible | A table of entries that allow manageability of Connect Guard TxSC Thresholds. | |
| f3ConnectGuardTxSCThresholdEntry | 1.3.6.1.4.1.2544.1.12.36.2.6.1 | not-accessible | A conceptual row in the f3ConnectGuardTxSCThresholdEntry. | |
| I32 f3ConnectGuardTxSCThresholdIndex | 1.3.6.1.4.1.2544.1.12.36.2.6.1.1 | Integer32 | not-accessible | An index that uniquely identifies an entry in the f3ConnectGuardTxSCThresholdTable. |
| NUM f3ConnectGuardTxSCThresholdInterval | 1.3.6.1.4.1.2544.1.12.36.2.6.1.2 | CmPmIntervalType | read-only | The interval over which monitored value is sampled and compared with the specified threshold. |
| NUM f3ConnectGuardTxSCThresholdVariable | 1.3.6.1.4.1.2544.1.12.36.2.6.1.3 | VariablePointer | read-only | The object identifier of the particular variable to be sampled. |
| U32 f3ConnectGuardTxSCThresholdValueLo | 1.3.6.1.4.1.2544.1.12.36.2.6.1.4 | Unsigned32 | read-write | Lower 32 bits of the threshold value. |
| U32 f3ConnectGuardTxSCThresholdValueHi | 1.3.6.1.4.1.2544.1.12.36.2.6.1.5 | Unsigned32 | read-write | Higher 32 bits of the threshold value. |
| NUM f3ConnectGuardTxSCThresholdMonValue | 1.3.6.1.4.1.2544.1.12.36.2.6.1.6 | PerfCounter64 | read-only | Monitored value corresponding to f3ConnectGuardTxSCThresholdVariable. |
| f3ConnectGuardRxSCStatsTable | 1.3.6.1.4.1.2544.1.12.36.2.7 | not-accessible | A collection of Connect Guard RxSC statistics. These reflect the current data. | |
| f3ConnectGuardRxSCStatsEntry | 1.3.6.1.4.1.2544.1.12.36.2.7.1 | not-accessible | A conceptual row in the f3ConnectGuardRxSCStatsTable. Entries exist in this table for each Connect Guard RxSC. | |
| I32 f3ConnectGuardRxSCStatsIndex | 1.3.6.1.4.1.2544.1.12.36.2.7.1.1 | Integer32 | not-accessible | An arbitrary integer index value used to uniquely identify this Connect Guard Rx SC statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min |
| NUM f3ConnectGuardRxSCStatsIntervalType | 1.3.6.1.4.1.2544.1.12.36.2.7.1.2 | CmPmIntervalType | read-only | Indicates the type of collection, i.e. whether it is 15 Min, 1 Day or rollover. |
| T/F f3ConnectGuardRxSCStatsValid | 1.3.6.1.4.1.2544.1.12.36.2.7.1.3 | TruthValue | read-only | Indicates the validity of the bin. |
| CMP f3ConnectGuardRxSCStatsAction | 1.3.6.1.4.1.2544.1.12.36.2.7.1.4 | CmPmBinAction | read-write | Allows the operator to clear the bin. |
| NUM f3ConnectGuardRxSCStatsRxUnusedSAPkts | 1.3.6.1.4.1.2544.1.12.36.2.7.1.5 | PerfCounter64 | read-only | The summation of counter secyRxSAStatsUnusedSAPkts information for all the SAs. |
| NUM f3ConnectGuardRxSCStatsRxNoUsingSAPkts | 1.3.6.1.4.1.2544.1.12.36.2.7.1.6 | PerfCounter64 | read-only | The summation of counter secyRxSAStatsNoUsingSAPkts information for all the SAs. |
| NUM f3ConnectGuardRxSCStatsRxLatePkts | 1.3.6.1.4.1.2544.1.12.36.2.7.1.7 | PerfCounter64 | read-only | the number of received packets that have been discarded with the condition : secyReplayProtect is equal to true and the PN of the packet is lower than the lower bound replay check PN. |
| NUM f3ConnectGuardRxSCStatsRxNotValidPkts | 1.3.6.1.4.1.2544.1.12.36.2.7.1.8 | PerfCounter64 | read-only | The summation of counter secyRxSAStatsNotValidPkts information for all the SAs. |
| NUM f3ConnectGuardRxSCStatsRxInvalidPkts | 1.3.6.1.4.1.2544.1.12.36.2.7.1.9 | PerfCounter64 | read-only | The summation of counter secyRxSAStatsInvalidPkts information for all the SAs. |
| NUM f3ConnectGuardRxSCStatsRxDelayedPkts | 1.3.6.1.4.1.2544.1.12.36.2.7.1.10 | PerfCounter64 | read-only | The number of packets with the condition that the PN of the packets is lower than the lower bound replay protection PN. |
| NUM f3ConnectGuardRxSCStatsRxUncheckedPkts | 1.3.6.1.4.1.2544.1.12.36.2.7.1.11 | PerfCounter64 | read-only | The number of packets with the following condition: -secyValidateFrames is disabled or -secyValidateFrames is not disabled and the packet is not encrypted and the integrity check has failed or -secyValidateFrames is not disable and the packet is encrypted and integrity check has failed. |
| NUM f3ConnectGuardRxSCStatsRxOKPkts | 1.3.6.1.4.1.2544.1.12.36.2.7.1.12 | PerfCounter64 | read-only | The summation of counter secyRxSAStatsOKPkts information for all the SAs. |
| NUM f3ConnectGuardRxSCStatsRxOctetsValidated | 1.3.6.1.4.1.2544.1.12.36.2.7.1.13 | PerfCounter64 | read-only | The number of octets of plaintext recovered from received packets that were integrity protected but not encrypted. |
| NUM f3ConnectGuardRxSCStatsRxOctetsDecrypted | 1.3.6.1.4.1.2544.1.12.36.2.7.1.14 | PerfCounter64 | read-only | The number of octets of plaintext recovered from received packets that were integrity protected and encrypted. |
| f3ConnectGuardRxSCHistoryTable | 1.3.6.1.4.1.2544.1.12.36.2.8 | not-accessible | A collection of Connect Guard RxSC history statistics. These reflect the history data. | |
| f3ConnectGuardRxSCHistoryEntry | 1.3.6.1.4.1.2544.1.12.36.2.8.1 | not-accessible | A conceptual row in the f3ConnectGuardRxSCHistoryTable. Entries exist in this table for each Connect Guard Flow RX SC. | |
| I32 f3ConnectGuardRxSCHistoryIndex | 1.3.6.1.4.1.2544.1.12.36.2.8.1.1 | Integer32 | not-accessible | An arbitrary integer index value used to uniquely identify this Connect Guard RxSC statistics entry. |
| DAT f3ConnectGuardRxSCHistoryTime | 1.3.6.1.4.1.2544.1.12.36.2.8.1.2 | DateAndTime | read-only | Indicates the time of history bin creation. |
| T/F f3ConnectGuardRxSCHistoryValid | 1.3.6.1.4.1.2544.1.12.36.2.8.1.3 | TruthValue | read-only | Indicates the validity of the bin. |
| CMP f3ConnectGuardRxSCHistoryAction | 1.3.6.1.4.1.2544.1.12.36.2.8.1.4 | CmPmBinAction | read-write | Allows the operator to clear the bin. |
| NUM f3ConnectGuardRxSCHistoryRxUnusedSAPkts | 1.3.6.1.4.1.2544.1.12.36.2.8.1.5 | PerfCounter64 | read-only | The summation of counter secyRxSAStatsUnusedSAPkts information for all the SAs. |
| NUM f3ConnectGuardRxSCHistoryRxNoUsingSAPkts | 1.3.6.1.4.1.2544.1.12.36.2.8.1.6 | PerfCounter64 | read-only | The summation of counter secyRxSAStatsNoUsingSAPkts information for all the SAs. |
| NUM f3ConnectGuardRxSCHistoryRxLatePkts | 1.3.6.1.4.1.2544.1.12.36.2.8.1.7 | PerfCounter64 | read-only | the number of received packets that have been discarded with the condition : secyReplayProtect is equal to true and the PN of the packet is lower than the lower bound replay check PN. |
| NUM f3ConnectGuardRxSCHistoryRxNotValidPkts | 1.3.6.1.4.1.2544.1.12.36.2.8.1.8 | PerfCounter64 | read-only | The summation of counter secyRxSAStatsNotValidPkts information for all the SAs. |
| NUM f3ConnectGuardRxSCHistoryRxInvalidPkts | 1.3.6.1.4.1.2544.1.12.36.2.8.1.9 | PerfCounter64 | read-only | The summation of counter secyRxSAStatsInvalidPkts information for all the SAs. |
| NUM f3ConnectGuardRxSCHistoryRxDelayedPkts | 1.3.6.1.4.1.2544.1.12.36.2.8.1.10 | PerfCounter64 | read-only | The number of packets with the condition that the PN of the packets is lower than the lower bound replay protection PN. |
| NUM f3ConnectGuardRxSCHistoryRxUncheckedPkts | 1.3.6.1.4.1.2544.1.12.36.2.8.1.11 | PerfCounter64 | read-only | The number of packets with the following condition: -secyValidateFrames is disabled or -secyValidateFrames is not disabled and the packet is not encrypted and the integrity check has failed or -secyValidateFrames is not disable and the packet is encrypted and integrity check has failed. |
| NUM f3ConnectGuardRxSCHistoryRxOKPkts | 1.3.6.1.4.1.2544.1.12.36.2.8.1.12 | PerfCounter64 | read-only | The summation of counter secyRxSAStatsOKPkts information for all the SAs. |
| NUM f3ConnectGuardRxSCHistoryRxOctetsValidated | 1.3.6.1.4.1.2544.1.12.36.2.8.1.13 | PerfCounter64 | read-only | The number of octets of plaintext recovered from received packets that were integrity protected but not encrypted. |
| NUM f3ConnectGuardRxSCHistoryRxOctetsDecrypted | 1.3.6.1.4.1.2544.1.12.36.2.8.1.14 | PerfCounter64 | read-only | The number of octets of plaintext recovered from received packets that were integrity protected and encrypted. |
| f3ConnectGuardRxSCThresholdTable | 1.3.6.1.4.1.2544.1.12.36.2.9 | not-accessible | A table of entries that allow manageability of Connect Guard RxSC Thresholds. | |
| f3ConnectGuardRxSCThresholdEntry | 1.3.6.1.4.1.2544.1.12.36.2.9.1 | not-accessible | A conceptual row in the f3ConnectGuardRxSCThresholdEntry. | |
| I32 f3ConnectGuardRxSCThresholdIndex | 1.3.6.1.4.1.2544.1.12.36.2.9.1.1 | Integer32 | not-accessible | An index that uniquely identifies an entry in the f3ConnectGuardRxSCThresholdTable. |
| NUM f3ConnectGuardRxSCThresholdInterval | 1.3.6.1.4.1.2544.1.12.36.2.9.1.2 | CmPmIntervalType | read-only | The interval over which monitored value is sampled and compared with the specified threshold. |
| NUM f3ConnectGuardRxSCThresholdVariable | 1.3.6.1.4.1.2544.1.12.36.2.9.1.3 | VariablePointer | read-only | The object identifier of the particular variable to be sampled. |
| U32 f3ConnectGuardRxSCThresholdValueLo | 1.3.6.1.4.1.2544.1.12.36.2.9.1.4 | Unsigned32 | read-write | Lower 32 bits of the threshold value. |
| U32 f3ConnectGuardRxSCThresholdValueHi | 1.3.6.1.4.1.2544.1.12.36.2.9.1.5 | Unsigned32 | read-write | Higher 32 bits of the threshold value. |
| NUM f3ConnectGuardRxSCThresholdMonValue | 1.3.6.1.4.1.2544.1.12.36.2.9.1.6 | PerfCounter64 | read-only | Monitored value corresponding to f3ConnectGuardRxSCThresholdVariable. |
| f3ConnectGuardTxSAStatsTable | 1.3.6.1.4.1.2544.1.12.36.2.10 | not-accessible | A collection of Connect Guard Tx SA statistics. These reflect the current data. | |
| f3ConnectGuardTxSAStatsEntry | 1.3.6.1.4.1.2544.1.12.36.2.10.1 | not-accessible | A conceptual row in the f3ConnectGuardTxSAStatsTable. Entries exist in this table for each Connect Guard TxSA. | |
| NUM f3ConnectGuardTxSAStatsProtectedPkts | 1.3.6.1.4.1.2544.1.12.36.2.10.1.1 | PerfCounter64 | read-only | The number of integrity protected but not encrypted packets for this transmitting SA. |
| NUM f3ConnectGuardTxSAStatsEncryptedPkts | 1.3.6.1.4.1.2544.1.12.36.2.10.1.2 | PerfCounter64 | read-only | The number of integrity protected and encrypted packets for this transmitting SA. |
| f3ConnectGuardRxSAStatsTable | 1.3.6.1.4.1.2544.1.12.36.2.11 | not-accessible | A collection of Connect Guard Rx SA statistics. These reflect the current data. | |
| f3ConnectGuardRxSAStatsEntry | 1.3.6.1.4.1.2544.1.12.36.2.11.1 | not-accessible | A conceptual row in the f3ConnectGuardRxSAStatsTable. Entries exist in this table for each Connect Guard RxSA. | |
| NUM f3ConnectGuardRxSAStatsUnusedSAPkts | 1.3.6.1.4.1.2544.1.12.36.2.11.1.1 | PerfCounter64 | read-only | For this SA which is not currently in use, the number of received, unencrypted, packets with secyValidateFrames not in the strict mode. |
| NUM f3ConnectGuardRxSAStatsNoUsingSAPkts | 1.3.6.1.4.1.2544.1.12.36.2.11.1.2 | PerfCounter64 | read-only | For this SA which is not currently in use, the number of received packets that have been discarded, and have either the packets encrypted or the secyValidateFrames set to strict mode. |
| NUM f3ConnectGuardRxSAStatsNotValidPkts | 1.3.6.1.4.1.2544.1.12.36.2.11.1.3 | PerfCounter64 | read-only | For this SA, the number discarded packets with the condition that the packets are not valid and one of the following conditions are true: either secyValidateFrames in strict mode or the packets encrypted. |
| NUM f3ConnectGuardRxSAStatsInvalidPkts | 1.3.6.1.4.1.2544.1.12.36.2.11.1.4 | PerfCounter64 | read-only | For this SA, the number of packets with the condition that the packets are not valid and secyValidateFrames is in check mode. |
| NUM f3ConnectGuardRxSAStatsOKPkts | 1.3.6.1.4.1.2544.1.12.36.2.11.1.5 | PerfCounter64 | read-only | For this SA, the number of validated packets. |
| f3ConnectGuardNotifications | 1.3.6.1.4.1.2544.1.12.36.3 | |||
| NTF f3ConnectGuardFlowThresholdCrossingAlert | 1.3.6.1.4.1.2544.1.12.36.3.1 | This trap is sent each time a threshold on a PM condition on an Connect Guard flow is crossed. | ||
| NTF f3ConnectGuardTxSCThresholdCrossingAlert | 1.3.6.1.4.1.2544.1.12.36.3.2 | This trap is sent each time a threshold on a PM condition on an Connect Guard Tx SC is crossed. | ||
| NTF f3ConnectGuardRxSCThresholdCrossingAlert | 1.3.6.1.4.1.2544.1.12.36.3.3 | This trap is sent each time a threshold on a PM condition on an Connect Guard Rx SC is crossed. | ||
| NTF f3ConnectGuardStateChangeTrap | 1.3.6.1.4.1.2544.1.12.36.3.4 | This trap is sent each time secure state value changed. | ||
| f3ConnectGuardConformance | 1.3.6.1.4.1.2544.1.12.36.4 | |||
| f3ConnectGuardCompliances | 1.3.6.1.4.1.2544.1.12.36.4.1 | |||
| f3ConnectGuardCompliance | 1.3.6.1.4.1.2544.1.12.36.4.1.1 | Describes the requirements for conformance to the Connect Guard. | ||
| f3ConnectGuardGroups | 1.3.6.1.4.1.2544.1.12.36.4.2 | |||
| f3ConnectGuardObjectsGroup | 1.3.6.1.4.1.2544.1.12.36.4.2.1 | A collection of objects used to manage the Connect Guard functionality. | ||
| f3ConnectGuardPerfGroup | 1.3.6.1.4.1.2544.1.12.36.4.2.2 | A collection of objects performance used to manage the Connect Guard functionality. |
RFC description
Defines Connect Guard flow security management objects for ADVA FSP150CM/CC optical networking platforms with encryption and key exchange features.
Start monitoring ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (Connect Guard link encryption) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.