ERICSSON-ROUTER-OPTICAL-TRANSCEIVER-MIB

All MIBs › ERICSSON-ROUTER-OPTICAL-TRANSCEIVER-MIB

Organization: Ericsson AB

Last Updated: 2015-06-25

Category: Domain: Optical Transport, Vendor: Ericsson

Description: Monitors optical transceiver (SFP/XFP/QSFP) DOM parameters such as optical power, temperature, and bias current.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ERICSSON-ROUTER-OPTICAL-TRANSCEIVER-MIB?

ERICSSON-ROUTER-OPTICAL-TRANSCEIVER-MIB is an Ericsson vendor MIB for the SmartEdge/SSR family of routers, providing digital optical monitoring (DOM) data for pluggable optical transceivers (SFP/XFP/QSFP) installed in line-card ports. It exposes a per-transceiver table keyed by card slot and port that reports transceiver type, media type, wavelength/frequency, serial number, CLEI code, and whether Ericsson-approved diagnostics monitoring is available. This is squarely a hardware-health MIB: it lets an admin confirm optical module identity/compatibility and, where diagnostic monitoring is enabled, watch for degraded optical conditions (implicitly optical power, temperature, and bias current per its short description) that presage link failures. It depends on the router's entity/physical-slot model to locate each transceiver by card slot and port, complementing standard ENTITY-MIB and IF-MIB data. It is deployed on Ericsson SmartEdge/SM/SSR routers wherever pluggable optics are used on line-card interfaces, especially in service-provider optical transport and edge-routing roles. Engineers can download the ERICSSON-ROUTER-OPTICAL-TRANSCEIVER-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ERICSSON-ROUTER-OPTICAL-TRANSCEIVER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ericsson SmartEdge/SM/SSR routers with pluggable optical transceivers

Monitoring Examples

An admin would poll eriRouterOpticalTransceiverPortTable/eriRouterOpticalTransceiverPortEntry indexed by eriRouterOpticalTransceiverCardSlot and eriRouterOpticalTransceiverPort to identify each installed module's eriRouterOpticalTransceiverType, eriRouterOpticalTransceiverSerialNo, and eriRouterOpticalTransceiverWaveLength. Checking eriRouterOpticalTransceiverEriRouterEricssonApproved would flag use of a non-approved/third-party optic, while eriRouterOpticalTransceiverDiagMonitoring indicates whether that port's module supports real-time DOM telemetry for detecting optical power or temperature degradation.

What Can Be Monitored

transceiver type and media type
wavelength/frequency
serial number and CLEI code
Ericsson-approved status
diagnostic monitoring availability
card slot/port location

Imported Objects

From ERICSSON-ROUTER-ALARM-TC

EriRouterAlarmId
EriRouterAlarmPerceivedSeverity
EriRouterAlarmServiceAffecting

From ERICSSON-ROUTER-SFP-MIB

eriRouterSfpAlarmDateAndTime	OBJECT-TYPE
eriRouterSfpAlarmDescription	OBJECT-TYPE
eriRouterSfpAlarmId	OBJECT-TYPE
eriRouterSfpAlarmProbableCause	OBJECT-TYPE
eriRouterSfpAlarmSeverity	OBJECT-TYPE
eriRouterSfpAlarmType	OBJECT-TYPE
eriRouterSfpMonMIBConformance	OBJECT-IDENTITY
eriRouterSfpMonMIBNotifications	OBJECT-IDENTITY
eriRouterSfpMonMIBObjects	OBJECT-IDENTITY

From ERICSSON-ROUTER-SMI

eriRouterMgmt

OBJECT-IDENTITY

From ERICSSON-ROUTER-TC

EriRouterPort
EriRouterSlot

From IANA-ITU-ALARM-TC-MIB

IANAItuProbableCause

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
transmission

From SNMPv2-TC

DateAndTime
DisplayString
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using eriRouterOpticalTransceiverActiveAlarmCount OID:

Select an Ericsson SmartEdge/SM/SSR router (Redback Networks heritage) with pluggable optical transceiver (SFP/XFP/QSFP DOM) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type eriRouterOpticalTransceiverActiveAlarmCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of alarms active on the Optical Transceiver. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the count changes from its expected baseline, since that would indicate the underlying set of items changed unexpectedly. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF eriRouterOpticalTransceiverAlarm	1.3.6.1.4.1.193.218.2.49.0.2			An eriRouterOpticalTransceiverAlarm notification signifies that an alarm has been raised or cleared on a Optical Transceiver
NTF eriRouterOpticalTransceiverLaneAlarm	1.3.6.1.4.1.193.218.2.49.0.3			An eriRouterOpticalTransceiverLaneAlarm notification signifies that an alarm has been raised or cleared in a lane on a Optical Transceiver
eriRouterOpticalTransceiverMonMIBGroups	1.3.6.1.4.1.193.218.2.49.2.3
eriRouterOpticalTransceiverMonMIBNotificationGroup	1.3.6.1.4.1.193.218.2.49.2.3.2			A collection of notifications providing Optical Transceiver fault condition
eriRouterOpticalTransceiverMonMIBCompliances	1.3.6.1.4.1.193.218.2.49.2.4
eriRouterOpticalTransceiverMonMIBCompliance	1.3.6.1.4.1.193.218.2.49.2.4.1			The compliance statement for the OpticalTransceiver MIB
eriRouterOpticalTransceiver	1.3.6.1.4.1.193.218.2.50			The MIB used to manage the Optical Transceivers in Line Card ports in SSR
eriRouterOpticalTransceiverDetails	1.3.6.1.4.1.193.218.2.50.1
eriRouterOpticalTransceiverPortTable	1.3.6.1.4.1.193.218.2.50.1.1		not-accessible	This table contains the ports with optical transceivers and corresponding parameters
eriRouterOpticalTransceiverPortEntry	1.3.6.1.4.1.193.218.2.50.1.1.1		not-accessible	Line Card port optical transceiver parameter description.
ERI eriRouterOpticalTransceiverCardSlot	1.3.6.1.4.1.193.218.2.50.1.1.1.1	EriRouterSlot	read-only	The chassis slot number in which the card is present where the Optical Transceiver plugged in.
ERI eriRouterOpticalTransceiverPort	1.3.6.1.4.1.193.218.2.50.1.1.1.2	EriRouterPort	read-only	The port number where the Optical Transceiver plugged in.
OCT eriRouterOpticalTransceiverType	1.3.6.1.4.1.193.218.2.50.1.1.1.3	OCTET STRING	read-only	Type and category of Optical Transceiver
OCT eriRouterOpticalTransceiverMediaType	1.3.6.1.4.1.193.218.2.50.1.1.1.4	OCTET STRING	read-only	Optical Transceiver Media Type
T/F eriRouterOpticalTransceiverEriRouterEricssonApproved	1.3.6.1.4.1.193.218.2.50.1.1.1.5	TruthValue	read-only	Is the Optical Transceiver n this port approved by Ericsson, Yes/No?
T/F eriRouterOpticalTransceiverDiagMonitoring	1.3.6.1.4.1.193.218.2.50.1.1.1.6	TruthValue	read-only	Is Optical Transceiver Diag Monitoring On or Off?
OCT eriRouterOpticalTransceiverCLEIcode	1.3.6.1.4.1.193.218.2.50.1.1.1.7	OCTET STRING	read-only	Optical Transceiver Common Language Equipment Identifier (CLEI) code.
OCT eriRouterOpticalTransceiverSerialNo	1.3.6.1.4.1.193.218.2.50.1.1.1.8	OCTET STRING	read-only	Optical Transceiver serial number
OCT eriRouterOpticalTransceiverFrequency	1.3.6.1.4.1.193.218.2.50.1.1.1.9	OCTET STRING	read-only	Optical Transceiver Frequency
ERI eriRouterOpticalTransceiverWaveLength	1.3.6.1.4.1.193.218.2.50.1.1.1.10	EriRouterOpticalTransceiverParamWaveLength	read-only	Optical Transceiver Wave Length
OCT eriRouterOpticalTransceiverAdditionalFeatures	1.3.6.1.4.1.193.218.2.50.1.1.1.11	OCTET STRING	read-only	Optical Transceiver Additional Features such as, Is Optical Transceiver OTN capable? and/or Is Optical Transceiver Tunable?
OCT eriRouterOpticalTransceiverFrequencyStart	1.3.6.1.4.1.193.218.2.50.1.1.1.12	OCTET STRING	read-only	Frequency Start for tunable optical transceiver. Not applicable if optical transceiver is not tunable
OCT eriRouterOpticalTransceiverFrequencyEnd	1.3.6.1.4.1.193.218.2.50.1.1.1.13	OCTET STRING	read-only	Frequency End for tunable optical transceiver. Not applicable if optical transceiver is not tunable
OCT eriRouterOpticalTransceiverFrequencySpacing	1.3.6.1.4.1.193.218.2.50.1.1.1.14	OCTET STRING	read-only	Frequency Spacing for tunable optical transceiver. Not applicable if optical transceiver is not tunable
OCT eriRouterOpticalTransceiverOTNFramer	1.3.6.1.4.1.193.218.2.50.1.1.1.15	OCTET STRING	read-only	Framer of OTN if optical transceiver is OTN capable. Not applicable if optical transceiver is not OTN capable
OCT eriRouterOpticalTransceiverOTNFEC	1.3.6.1.4.1.193.218.2.50.1.1.1.16	OCTET STRING	read-only	FEC of OTN if optical transceiver is OTN capable. Not applicable if optical transceiver is not OTN capable
OCT eriRouterOpticalTransceiverPowerLevel	1.3.6.1.4.1.193.218.2.50.1.1.1.17	OCTET STRING	read-only	Optical Transceiver Power Level
INT eriRouterOpticalTransceiverActiveAlarmCountEx	1.3.6.1.4.1.193.218.2.50.1.1.1.18	INTEGER	read-only	Number of alarms active on the Optical Transceiver
I32 eriRouterOpticalTransceiverParamBitMask	1.3.6.1.4.1.193.218.2.50.1.1.1.19	Integer32	read-only	This Bit Mask indicates which values are valid for EriRouterOpticalTransceiverParamType in eriRouterOpticalTransceiverParamTable: 0x0001 optical transceiver txpower valid 0x0002 optical transceiver rxpower valid 0x0004 optical transceiver temperature valid 0x0008 optical transceiver laserBiasCurrent valid 0x0010 optical transceiver soaBiasCurrent valid 0x0020 optical transceiver Vcc valid 0x0040 optical transceiver aux1 valid 0x0080 optical transceiver aux2 valid 0x0100 optical transceiver lane txpower valid 0x0200 optical transceiver lane rxpower valid 0x0400 optical transceiver lane temperature valid 0x0800 optical transceiver lane laserBiasCurrent valid
INT eriRouterOpticalTransceiverLaneCount	1.3.6.1.4.1.193.218.2.50.1.1.1.20	INTEGER	read-only	Number of Lanes in optical transceiver
eriRouterOpticalTransceiverParamTable	1.3.6.1.4.1.193.218.2.50.1.2		not-accessible	This table provides objects to monitor optical transceiver parameters in a network element. It also provides objects for monitoring high and low warning and alarm threshold on these monitored parameters.
eriRouterOpticalTransceiverParamEntry	1.3.6.1.4.1.193.218.2.50.1.2.1		not-accessible	OpticalTransceiver Parameter Entries in Table
ERI eriRouterOpticalTransceiverParamType	1.3.6.1.4.1.193.218.2.50.1.2.1.1	EriRouterOpticalTransceiverParamType	read-only	This object specifies the optical parameter type that is being monitored in this entry.
OCT eriRouterOpticalTransceiverParamDescription	1.3.6.1.4.1.193.218.2.50.1.2.1.2	OCTET STRING	read-only	This object specifies the optical parameter description including units that is being monitored in this entry.
ERI eriRouterOpticalTransceiverCurrentValue	1.3.6.1.4.1.193.218.2.50.1.2.1.3	EriRouterOpticalTransceiverParameterValue	read-only	The current value of tx power, rx power, temperature, bias current and Vcc
ERI eriRouterOpticalTransceiverMaxAlarmValue	1.3.6.1.4.1.193.218.2.50.1.2.1.4	EriRouterOpticalTransceiverParameterValue	read-only	The alarm high threshold value of tx power, rx power, temperature, bias current and Vcc
ERI eriRouterOpticalTransceiverMaxWarningValue	1.3.6.1.4.1.193.218.2.50.1.2.1.5	EriRouterOpticalTransceiverParameterValue	read-only	The warning high threshold value of tx power, rx power, temperature, bias current and Vcc
ERI eriRouterOpticalTransceiverMinAlarmValue	1.3.6.1.4.1.193.218.2.50.1.2.1.6	EriRouterOpticalTransceiverParameterValue	read-only	The alarm low threshold value of tx power, rx power, temperature, bias current and Vcc
ERI eriRouterOpticalTransceiverMinWarningValue	1.3.6.1.4.1.193.218.2.50.1.2.1.7	EriRouterOpticalTransceiverParameterValue	read-only	The warning low threshold value of tx power, rx power, temperature, bias current and Vcc
eriRouterLaneInOpticalTransceiverParamTable	1.3.6.1.4.1.193.218.2.50.1.3		not-accessible	This table provides objects to monitor optical transceiver parameters in a network element. It also provides objects for monitoring high and low warning and alarm threshold on these monitored parameters.
eriRouterLaneInOpticalTransceiverParamEntry	1.3.6.1.4.1.193.218.2.50.1.3.1		not-accessible	LaneInOpticalTransceiver Parameter Entries in Table
I32 eriRouterLaneInOpticalTransceiver	1.3.6.1.4.1.193.218.2.50.1.3.1.1	Integer32	read-only	This object specifies the optical tranceiver lane that is being monitored in this entry.
ERI eriRouterLaneInOpticalTransceiverParamType	1.3.6.1.4.1.193.218.2.50.1.3.1.2	EriRouterLaneInOpticalTransceiverParamType	read-only	This object specifies the optical parameter type that is being monitored in this entry.
ERI eriRouterLaneInOpticalTransceiverCurrentValue	1.3.6.1.4.1.193.218.2.50.1.3.1.3	EriRouterLaneInOpticalTransceiverParameterValue	read-only	The current value of tx power, rx power, temperature, bias current and Vcc
ERI eriRouterLaneInOpticalTransceiverMaxAlarmValue	1.3.6.1.4.1.193.218.2.50.1.3.1.4	EriRouterLaneInOpticalTransceiverParameterValue	read-only	The alarm high threshold value of tx power, rx power, temperature, bias current and Vcc
ERI eriRouterLaneInOpticalTransceiverMaxWarningValue	1.3.6.1.4.1.193.218.2.50.1.3.1.5	EriRouterLaneInOpticalTransceiverParameterValue	read-only	The warning high threshold value of tx power, rx power, temperature, bias current and Vcc
ERI eriRouterLaneInOpticalTransceiverMinAlarmValue	1.3.6.1.4.1.193.218.2.50.1.3.1.6	EriRouterLaneInOpticalTransceiverParameterValue	read-only	The alarm low threshold value of tx power, rx power, temperature, bias current and Vcc
ERI eriRouterLaneInOpticalTransceiverMinWarningValue	1.3.6.1.4.1.193.218.2.50.1.3.1.7	EriRouterLaneInOpticalTransceiverParameterValue	read-only	The warning low threshold value of tx power, rx power, temperature, bias current and Vcc

RFC description

Manages optical transceivers in Ericsson SSR line card ports, including transceiver parameters and monitoring.

Start monitoring Ericsson SmartEdge/SM/SSR router (Redback Networks heritage) with pluggable optical transceivers (SFP/XFP/QSFP DOM) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ERICSSON-ROUTER-OPTICAL-TRANSCEIVER-MIB