| OID symbolic | OID numeric | Type | Access | Description |
|---|
| eriRouterConfigFileMib | 1.3.6.1.4.1.193.218.2.13 | | | Defines the objects necessary to support loading
system configuration files and saving the contents of the
current system configuration.
For security reasons, all mib objects defined in this module
are only accessible via SNMP community strings (v1/v2c) or
SNMP contextNames (v3) that map to the system's 'local'
context.
Note well: due to these security reasons, it is highly
encouraged to only allow access to this MIB via the more
secure protocols supported by SNMPv3. |
| eriRouterConfigFileMIBNotifications | 1.3.6.1.4.1.193.218.2.13.0 | | | |
| NTF eriRouterCfJobCompleted | 1.3.6.1.4.1.193.218.2.13.0.1 | | | A notification indicating that a configuration job has
completed. |
| eriRouterConfigFileMIBObjects | 1.3.6.1.4.1.193.218.2.13.1 | | | |
| eriRouterCfJobs | 1.3.6.1.4.1.193.218.2.13.1.1 | | | |
| TES eriRouterCfJobSpinLock | 1.3.6.1.4.1.193.218.2.13.1.1.1 | TestAndIncr | read-write | An advisory lock used to allow several cooperating Command
Generator Applications to coordinate their use of facilities
to create/modify entries in the eriRouterCfJobTable. |
| U32 eriRouterCfJobNextIndex | 1.3.6.1.4.1.193.218.2.13.1.1.2 | Unsigned32 | read-only | The next available index which can be used to create a eriRouterCfJobEntry. |
| eriRouterCfJobTable | 1.3.6.1.4.1.193.218.2.13.1.1.3 | | not-accessible | A table which is used to start and monitor a process which
loads a configuration file, or saves the current configuration
out to a file.
The suggested method to create a new entry is:
1. GET(eriRouterCfJobSpinLock.0,
eriRouterCfJobNextIndex.0) and save in
slValue, niValue respectively
2. SET(eriRouterCfJobSpinLock.0 = slValue,
eriRouterCfJobXxx.niValue = ...
eriRouterCfJobYyy.niValue = ...
...
eriRouterCfJobRowStatus.niValue = 'createAndGo')
Entries whose state is 'completed' may be automatically
deleted by the system after some system dependant time. |
| eriRouterCfJobEntry | 1.3.6.1.4.1.193.218.2.13.1.1.3.1 | | not-accessible | An entry created by a Command Generator application which starts
and monitors a process which loads a system configuration file or
saves the current system configuration out to a file.
When eriRouterCfJobRowStatus becomes active, eriRouterCfJobState is set to
'pending' and is queued for processing. Only one job may be
processed at a time.
When the job reaches the head of the queue, eriRouterCfJobState is set
to 'inProgress' and the configuration operation will be performed.
When the operation completes, eriRouterCfJobState will be set to
'completed'. Also at this time the objects eriRouterCfJobResult and
eriRouterCfJobErrorMsgs will be instantiated and will provide the
success/failure status of the operation.
A job in the 'pending' state may be aborted by setting
eriRouterCfJobRowStatus to 'notInService' or 'destroy'.
An entry for a job which has completed (eriRouterCfJobState is
'completed') may be reset to the 'pending' state
by setting eriRouterCfRowStatus to 'notInService' and then back to
'active' to initiate another configuration operation.
Note: while eriRouterCfRowStatus equals 'active', the only object
instance that can be modified in the entry is eriRouterCfRowStatus. To
alter any other object instance, eriRouterCfRowStatus must be set to
'notInService'. |
| U32 eriRouterCfJobIndex | 1.3.6.1.4.1.193.218.2.13.1.1.3.1.1 | Unsigned32 | not-accessible | A unique identifier for an entry in this table. |
| INT eriRouterCfJobOp | 1.3.6.1.4.1.193.218.2.13.1.1.3.1.2 | INTEGER | read-create | The configuration operation to perform.
If 'load', the file specified in eriRouterCfJobFilename is retrieved,
parsed and loaded into the system configuration.
If 'save', the current system configuration is written to the
file specified in eriRouterCfJobFilename. |
| INT eriRouterCfJobProtocol | 1.3.6.1.4.1.193.218.2.13.1.1.3.1.3 | INTEGER | read-create | The file transfer protocol to use.
If 'local', the filename specified in eriRouterCfJobFilename exists
locally on the system (eg in /flash).
If 'tftp', the filename specified in eriRouterCfJobFilename will be
read/written from/to the system identified by eriRouterCfJobIpAddress
via the TFTP file transfer protocol.
If 'ftp', the filename specified in eriRouterCfJobFilename will be
read/written from/to the system identified by eriRouterCfJobIpAddress
via the FTP file transfer protocol. The values in
eriRouterCfJobUsername and eriRouterCfJobPassword will be used for
authentication. eriRouterCfJobPassiveMode can be used to
enable/disable FTP's passive mode. |
| STR eriRouterCfJobFilename | 1.3.6.1.4.1.193.218.2.13.1.1.3.1.4 | SnmpAdminString | read-create | The name of the source file (loads) or destination file (saves). |
| IPt eriRouterCfJobIpAddressType | 1.3.6.1.4.1.193.218.2.13.1.1.3.1.5 | InetAddressType | read-create | The address type for eriRouterCfJobIpAddress.
This object is only relevant for non-local filenames. If
eriRouterCfJobProtocol equals 'local', any value for this object
will effectively be ignored. |
| IP eriRouterCfJobIpAddress | 1.3.6.1.4.1.193.218.2.13.1.1.3.1.6 | InetAddress | read-create | The IP address for the file server which contains the source
file (loads) or destination file (saves).
This object is only relevant for non-local filenames. If
eriRouterCfJobProtocol equals 'local', any value for this object will
effectively be ignored. |
| STR eriRouterCfJobUsername | 1.3.6.1.4.1.193.218.2.13.1.1.3.1.7 | SnmpAdminString | read-create | The username to use for authentication with the file server.
This object is only relevant for the FTP protocol. If
eriRouterCfJobProtocol does not equal 'ftp', any value for this
object will effectively be ignored.
For security reasons, all SNMP gets on this object will
return a zero-length string. |
| STR eriRouterCfJobPassword | 1.3.6.1.4.1.193.218.2.13.1.1.3.1.8 | SnmpAdminString | read-create | The password to use for authentication with the file server.
A zero-length string value would be used for usernames that
do not require a password.
This object is only relevant for the FTP protocol. If
eriRouterCfJobProtocol does not equal 'ftp', any value for this
object will effectively be ignored.
For security reasons, all SNMP gets on this object will
return a zero-length string. |
| T/F eriRouterCfJobPassiveMode | 1.3.6.1.4.1.193.218.2.13.1.1.3.1.9 | TruthValue | read-create | Enables/disables passive mode on FTP connections.
This object is only relevant for the FTP protocol. If
eriRouterCfJobProtocol does not equal 'ftp', any value for this
object will effectively be ignored. |
| U32 eriRouterCfJobStopAtLine | 1.3.6.1.4.1.193.218.2.13.1.1.3.1.10 | Unsigned32 | read-create | If this object instance has a non-zero value, parsing and
loading of the configuration file will terminate after the
specified line number.
This object is only relevant for 'load' operations. If
eriRouterCfJobOp does not equal 'load', any value for this object will
effectively be ignored. |
| T/F eriRouterCfJobSaveDefaults | 1.3.6.1.4.1.193.218.2.13.1.1.3.1.11 | TruthValue | read-create | If 'true', default values for all configuration values are
saved. If 'false', only the values which have been explicitly
configured are saved.
This object is only relevant for 'save' operations. If
eriRouterCfJobOp does not equal 'save', any value for this object will
effectively be ignored. |
| INT eriRouterCfJobState | 1.3.6.1.4.1.193.218.2.13.1.1.3.1.12 | INTEGER | read-only | The current state of the configuration job.
pending -- The initial state of all jobs. Jobs are queued
and processed in order of creation.
inProgress -- The job is actively being performed.
completed -- The job has completed. |
| INT eriRouterCfJobResult | 1.3.6.1.4.1.193.218.2.13.1.1.3.1.13 | INTEGER | read-only | A generic result code. This object is instantiated only when
eriRouterCfJobStatus equals 'completed'.
success -- The job completed successfully.
other -- An error that doesn't fall into one of the categories
below.
noMemory -- Insufficient system resources to perform the
operation.
parse -- A parse failure occurred. ie- there was a syntax
error in the source configuration file.
io -- An i/o error occurred.
access -- A file access error occurred. This could be caused
by a non-existant source file, or insufficient
access/permission to create/modify the destination
file.
More detailed error descriptions can be found in the
eriRouterCfJobErrorMsgs object. |
| STR eriRouterCfJobErrorMsgs | 1.3.6.1.4.1.193.218.2.13.1.1.3.1.14 | SnmpAdminString | read-only | Detailed error messages generated during the configuration
operation. This object is instantiated only when eriRouterCfJobState
equals 'completed'.
Note: the amount of error messages produced by a configuration
operation may exceed the max size of this object (255 bytes).
If this happens, the last character in the eriRouterCfJobErrorMsgs
value will be '$' to indicate that a truncation occurred.
Note: there may be some types of messages that one will see
when performing a configuration operation via the CLI. However
these messages will not be seen in the values for this object.
A specific example on the SMS platform is the messages the
CLI will display when there is a parse failure. These messages
will not be captured in this object. |
| TIM eriRouterCfJobCreateTime | 1.3.6.1.4.1.193.218.2.13.1.1.3.1.15 | TimeStamp | read-only | The value of sysUpTime when this job entry was created. |
| TIM eriRouterCfJobStartTime | 1.3.6.1.4.1.193.218.2.13.1.1.3.1.16 | TimeStamp | read-only | The value of sysUpTime when eriRouterCfJobState moved from 'pending' to
'inProgress'.
This object will not be instantiated until eriRouterCfJobState moves to
'inProgress'. The object will be un-instantiated if
eriRouterCfJobRowStatus is set to 'notInService'. |
| TIM eriRouterCfJobStopTime | 1.3.6.1.4.1.193.218.2.13.1.1.3.1.17 | TimeStamp | read-only | The value of sysUpTime when the job completed.
This object will not be instantiated until eriRouterCfJobState moves to
'completed'. The object will be un-instantiated if
eriRouterCfJobRowStatus is set to 'notInService'. |
| T/F eriRouterCfJobNotifyOnCompletion | 1.3.6.1.4.1.193.218.2.13.1.1.3.1.18 | TruthValue | read-create | If 'true', an eriRouterCfJobCompleted notification will be generated
when the job completes. |
| STR eriRouterCfJobOwner | 1.3.6.1.4.1.193.218.2.13.1.1.3.1.19 | OwnerString | read-create | This object can be used to identify who/what/where created this
job entry. |
| ROW eriRouterCfJobRowStatus | 1.3.6.1.4.1.193.218.2.13.1.1.3.1.20 | RowStatus | read-create | The row status for creating, modifying, or deleting an entry
in the table.
Note that 'active' entries cannot be modified.
Any attempt to modify an object in this entry while
eriRouterCfJobRowStatus equals 'active' will result in an
inconsistentValue error.
To modify objects in an active entry, eriRouterCfJobRowStatus must
first be set to 'notInService'.
All entries will be automatically deleted by the agent after
some system dependent time. |
| eriRouterConfigFileMIBConformance | 1.3.6.1.4.1.193.218.2.13.2 | | | |
| eriRouterConfigFileCompliances | 1.3.6.1.4.1.193.218.2.13.2.1 | | | |
| eriRouterConfigFileCompliance | 1.3.6.1.4.1.193.218.2.13.2.1.1 | | | The compliance statement for SNMP entities which implement
this Configuration File MIB. |
| eriRouterConfigFileGroups | 1.3.6.1.4.1.193.218.2.13.2.2 | | | |
| eriRouterCfJobGroup | 1.3.6.1.4.1.193.218.2.13.2.2.1 | | | The collection of objects which represent a configuration job. |
| eriRouterCfJobNotifyGroup | 1.3.6.1.4.1.193.218.2.13.2.2.2 | | | The collection of notifications related to configuration jobs. |
