ENGENIUS-PRIVATE-MIB

All MIBs › ENGENIUS-PRIVATE-MIB

Organization: Senao R&D Dept., S/W Division

Last Updated: 2009-06-11

Category: Domain: Wireless, Vendor: EnGenius, Wireless and WLAN

Description: EnGenius private MIB providing proprietary management objects for configuring EnGenius wireless access points and routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ENGENIUS-PRIVATE-MIB?

ENGENIUS-PRIVATE-MIB is a proprietary MIB from EnGenius (originally developed under the Senao brand) that supplements the standard IEEE 802.11 MIB with vendor-specific management objects for EnGenius wireless access points and routers. It exposes system identity/configuration data, WAN connection settings, and wireless-specific status such as client association state. For monitoring purposes it surfaces both configuration (systemName, wanIPAddress, wanConnectionType, wanGeneralAccount) and live operational/fault indicators such as statusWLANSTAAssoc (wireless station association status) and errMsg, which functions as a device error/fault indicator akin to a basic software health flag. It explicitly depends on and supplements the standard IEEE 802.11 MIB, adding vendor-specific detail the standard MIB does not cover. It is deployed on EnGenius/Senao 802.11 wireless access points and routers used in SOHO and enterprise Wi-Fi deployments. Engineers can download the ENGENIUS-PRIVATE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ENGENIUS-PRIVATE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

EnGenius (Senao) 802.11 wireless access point or router

Monitoring Examples

An administrator would poll errMsg to detect an internal fault condition being reported by the device, and check statusWLANSTAAssoc to see whether wireless clients are currently associated to the radio, useful for diagnosing a Wi-Fi outage. wanIPAddress, wanSubnetMask, and wanConnectionType let an operator confirm the WAN uplink configuration matches expectations after a provisioning change, while modelName and wirelessMacAddress identify the specific hardware unit being polled. This MIB blends device identity, WAN configuration, and basic wireless fault/status monitoring.

What Can Be Monitored

wireless station association status
device error message/fault flag
WAN IP address and connection type
WAN account/domain configuration
device model and MAC address

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From RFC1213-MIB

ifIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
TimeTicks
enterprises

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TimeInterval
TimeStamp
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
engenius	1.3.6.1.4.1.14125
engeniusprivate	1.3.6.1.4.1.14125.2			The MIB module defines Senao implementation-specific metrics useful in managing IEEE 802.11 on Senao devices. This is used as a supplement to the standard 802.11 MIB proposed by IEEE.
status	1.3.6.1.4.1.14125.2.1
system	1.3.6.1.4.1.14125.2.1.1
STR systemName	1.3.6.1.4.1.14125.2.1.1.1	DisplayString	read-only	The DUT's system name.
STR sysPassword	1.3.6.1.4.1.14125.2.1.1.2	DisplayString	read-only	The password that system manager own.
STR errMsg	1.3.6.1.4.1.14125.2.1.1.3	DisplayString	read-only	The error message record
INT statusWLANSTAAssoc	1.3.6.1.4.1.14125.2.1.1.4	INTEGER	read-only	The status of wireless interface connect to AP
STR modelName	1.3.6.1.4.1.14125.2.1.1.5	DisplayString	read-only	Firmware model name
STR wirelessMacAddress	1.3.6.1.4.1.14125.2.1.1.6	DisplayString	read-only	The wireless MAC address
STR wanIPAddress	1.3.6.1.4.1.14125.2.1.1.7	DisplayString	read-only	The WAN IP address
STR wanSubnetMask	1.3.6.1.4.1.14125.2.1.1.8	DisplayString	read-only	The WAN subnet mask
configuration	1.3.6.1.4.1.14125.2.2
wan	1.3.6.1.4.1.14125.2.2.1
INT wanConnectionType	1.3.6.1.4.1.14125.2.2.1.1	INTEGER	read-write	The wan connection type which one of Static IP/DHCP/PPPoE/PPTP
STR wanGeneralAccount	1.3.6.1.4.1.14125.2.2.1.2	DisplayString	read-write	The DUT network Account ID
STR wanGeneralDomain	1.3.6.1.4.1.14125.2.2.1.3	DisplayString	read-write	The DUT network Domain Name
IP wanGeneralIP	1.3.6.1.4.1.14125.2.2.1.4	IpAddress	read-write	The DUT wan interface static IP address in static connection type
IP wanGeneralSubnetMask	1.3.6.1.4.1.14125.2.2.1.5	IpAddress	read-write	The DUT wan interface subnet mask in static connection type
IP wanGeneralGateway	1.3.6.1.4.1.14125.2.2.1.6	IpAddress	read-write	The DUT networks gateway IP address in static connection type
pppoe	1.3.6.1.4.1.14125.2.2.2
STR wanPPPoELoginName	1.3.6.1.4.1.14125.2.2.2.1	DisplayString	read-write	PPPoE user name
STR wanPPPoEPassword	1.3.6.1.4.1.14125.2.2.2.2	DisplayString	read-write	PPPoE password
STR wanPPPoEServiceName	1.3.6.1.4.1.14125.2.2.2.3	DisplayString	read-write	Specifies the desired PPPoE service name
INT wanPPPoEConnectionType	1.3.6.1.4.1.14125.2.2.2.4	INTEGER	read-write	PPPoE connection type which keep alive or on demand.
I32 wanPPPoEMaxIdleTime	1.3.6.1.4.1.14125.2.2.2.5	Integer32	read-write	The max idle time (minutes) in connect on demand connection type
I32 wanPPPoERedialPeriod	1.3.6.1.4.1.14125.2.2.2.6	Integer32	read-write	The redial period (seconds) in keep alive connection type
dns	1.3.6.1.4.1.14125.2.2.3
INT wanDNSSourc	1.3.6.1.4.1.14125.2.2.3.1	INTEGER	read-write	Automatically gets DNS IP address from ISP or user sepcisicify
IP wanPrimaryDNSIP	1.3.6.1.4.1.14125.2.2.3.2	IpAddress	read-write	The primary DNS IP address
IP wanSecondaryDNSIP	1.3.6.1.4.1.14125.2.2.3.3	IpAddress	read-write	The secondary DNS IP address
mtu	1.3.6.1.4.1.14125.2.2.4
INT wanMTUMode	1.3.6.1.4.1.14125.2.2.4.1	INTEGER	read-write	Automatically setting MTU value or user sepcisicify
I32 wanMTU	1.3.6.1.4.1.14125.2.2.4.2	Integer32	read-write	The Maximum Transmission Unit (MTU) in WAN interface
I32 pppoeMTU	1.3.6.1.4.1.14125.2.2.4.3	Integer32	read-write	The Maximum Transmission Unit (MTU) in PPPoE protocol
landhcp	1.3.6.1.4.1.14125.2.2.5
INT lanDHCPC	1.3.6.1.4.1.14125.2.2.5.1	INTEGER	read-write	Automatically get LAN IP address form DHCP server or set static IP address
IP lanIP	1.3.6.1.4.1.14125.2.2.5.2	IpAddress	read-write	To setting static LAN IP address in DUT
IP lanSubnetmask	1.3.6.1.4.1.14125.2.2.5.3	IpAddress	read-write	To setting static Subnet Mask in DUT
IP lanGatewayIP	1.3.6.1.4.1.14125.2.2.5.4	IpAddress	read-write	To setting getway IP address in DUT
IP lanWINSAddr	1.3.6.1.4.1.14125.2.2.5.5	IpAddress	read-write	To setting WINS IP address in DUT
INT lanDHCPSrvEnable	1.3.6.1.4.1.14125.2.2.5.6	INTEGER	read-write	Enable / Disable DHCP server
IP lanDHCPSrvStartAddr	1.3.6.1.4.1.14125.2.2.5.7	IpAddress	read-write	To setting DHCP server allocate IP address up bound
IP lanDHCPSrvStopAddr	1.3.6.1.4.1.14125.2.2.5.8	IpAddress	read-write	To setting DHCP server allocate IP address low bound
ntp	1.3.6.1.4.1.14125.2.2.6
INT timeSettingMode	1.3.6.1.4.1.14125.2.2.6.1	INTEGER	read-write	Automatically get or manually set Date and Time
INT userNTPSrvMode	1.3.6.1.4.1.14125.2.2.6.2	INTEGER	read-write	Enable / Disable user sepcisicify NTP server
IP userNTPSrvIP	1.3.6.1.4.1.14125.2.2.6.3	IpAddress	read-write	User sepcisicify NTP server IP address
STR timeZone	1.3.6.1.4.1.14125.2.2.6.4	DisplayString	read-only	To setting time zone in DUT
admin	1.3.6.1.4.1.14125.2.2.8
STR username	1.3.6.1.4.1.14125.2.2.8.1	DisplayString	read-write	The User Name that system manager own
INT remoteManagementEnable	1.3.6.1.4.1.14125.2.2.8.3	INTEGER	read-write	Enable / Disable remote management DUT function
INT remoteUpgradeEnable	1.3.6.1.4.1.14125.2.2.8.4	INTEGER	read-write	Enable / Disable remote upgrade firmware
I32 remoteManagementPort	1.3.6.1.4.1.14125.2.2.8.5	Integer32	read-write	To setting remote management port
I32 remoteManagementVLANID	1.3.6.1.4.1.14125.2.2.8.6	Integer32	read-write	To setting management Tag on VLAN
wlan	1.3.6.1.4.1.14125.2.2.9
INT wlanMode	1.3.6.1.4.1.14125.2.2.9.1	INTEGER	read-write	The wireless lan operation mode. (802.11a/b/g)
INT chanBwMode	1.3.6.1.4.1.14125.2.2.9.2	INTEGER	read-write	The WLAN narrow band
STR wlanaSSID	1.3.6.1.4.1.14125.2.2.9.3	DisplayString	read-write	The SSID which station connect to
INT wlanOpMode	1.3.6.1.4.1.14125.2.2.9.4	INTEGER	read-write	The WLAN operation mode. (Access Point/ Client Bridge/ WDS Bridge/ Repeater/ AP Router / Client Router)
STR wlanCountryCode	1.3.6.1.4.1.14125.2.2.9.5	DisplayString	read-only	The country code
STR wlanCountry	1.3.6.1.4.1.14125.2.2.9.6	DisplayString	read-only	The string of the country name
I32 wlanChannel	1.3.6.1.4.1.14125.2.2.9.7	Integer32	read-write	The wireless channel frequency
INT wlanACLMode	1.3.6.1.4.1.14125.2.2.9.8	INTEGER	read-write	The WLAN Mac filter mode. (Disable / Deny / Allow)
I32 wlanOutdoorDistance	1.3.6.1.4.1.14125.2.2.9.9	Integer32	read-write	The distance between two DUTs
STR wlanDataRate	1.3.6.1.4.1.14125.2.2.9.10	DisplayString	read-write	The wireless LAN Data rate. The available input option: 1M, 2M, 5.5M, 6M, 9M, 11M, 12M, 18M, 24M, 36M, 48M, 54M, auto
I32 wlanTxPower	1.3.6.1.4.1.14125.2.2.9.11	Integer32	read-write	The WLAN transmission power
INT antennasel	1.3.6.1.4.1.14125.2.2.9.12	INTEGER	read-write	The antenna which prefer to use
I32 wlanBeaconInterval	1.3.6.1.4.1.14125.2.2.9.13	Integer32	read-write	The sent beacon interval time
I32 wlanRTSTh	1.3.6.1.4.1.14125.2.2.9.15	Integer32	read-write	The WLAN RTS/CTS threshold
I32 wlanFragLen	1.3.6.1.4.1.14125.2.2.9.16	Integer32	read-write	The WLAN packages fragment length
INT wlanProtmode	1.3.6.1.4.1.14125.2.2.9.18	INTEGER	read-write	Protection transmittion on G band. (CTS or RTS/CTS)
STR wlanPreferBSSID	1.3.6.1.4.1.14125.2.2.9.19	DisplayString	read-write	The MAC address of the prefer connection AP
wlanTable	1.3.6.1.4.1.14125.2.2.9.21		not-accessible	This table display the wlan table.
wlanTableEntry	1.3.6.1.4.1.14125.2.2.9.21.1		not-accessible	Represent the entry in the wlan table.
I32 wlanTableIndex	1.3.6.1.4.1.14125.2.2.9.21.1.1	Integer32	not-accessible	Specify the index of the wlan table.
INT wlanEnable	1.3.6.1.4.1.14125.2.2.9.21.1.2	INTEGER	read-write	Enable / Disable
STR wlanSSID	1.3.6.1.4.1.14125.2.2.9.21.1.3	DisplayString	read-write	The WLAN SSID
INT wlanHideSSID	1.3.6.1.4.1.14125.2.2.9.21.1.4	INTEGER	read-write	Enable / Disable broadcast SSID
INT wlanStaSeparation	1.3.6.1.4.1.14125.2.2.9.21.1.5	INTEGER	read-write	Enable / Disable STA separation
I32 wlanVLANID	1.3.6.1.4.1.14125.2.2.9.21.1.6	Integer32	read-write	The WLAN interface VLAN ID
INT wlanAuth	1.3.6.1.4.1.14125.2.2.9.21.1.7	INTEGER	read-write	The WLAN authentication type
INT wlanEncryption	1.3.6.1.4.1.14125.2.2.9.21.1.8	INTEGER	read-write	The WLAN encryption type
INT wlanWepDefaultKeyIdx	1.3.6.1.4.1.14125.2.2.9.21.1.9	INTEGER	read-write	The WLAN WEP Key index of combination
STR wlanWepKey	1.3.6.1.4.1.14125.2.2.9.21.1.10	DisplayString	read-write	The WLAN WEP Key combination. The input has to be 5,13,16 ascii keys, or 10,26,32 Hex keys
STR wlanWpapskPassphrase	1.3.6.1.4.1.14125.2.2.9.21.1.11	DisplayString	read-write	The WLAN WPA Key combination
IP wlanWpaRadiusSrvIP	1.3.6.1.4.1.14125.2.2.9.21.1.12	IpAddress	read-write	The WLAN WPA-Enterprise remote radius server IP
I32 wlanWpaRadiusSrvPort	1.3.6.1.4.1.14125.2.2.9.21.1.13	Integer32	read-write	The WLAN WPA-Enterprise remote radius server port
STR wlanWpaRadiusSrvSecret	1.3.6.1.4.1.14125.2.2.9.21.1.14	DisplayString	read-write	The WLAN WPA-Enterprise key combination
I32 wlanWpaGroupKeyUpdateInterval	1.3.6.1.4.1.14125.2.2.9.21.1.15	Integer32	read-write	The WLAN WPA-Enterprise group key update interval
wlansta	1.3.6.1.4.1.14125.2.2.10
INT wlanSTAAuth	1.3.6.1.4.1.14125.2.2.10.1	INTEGER	read-write	The WLAN STA authentication type
INT wlanSTAEncryption	1.3.6.1.4.1.14125.2.2.10.2	INTEGER	read-write	The WLAN STA encryption type
INT wlanSTAWepDefaultKeyIdx	1.3.6.1.4.1.14125.2.2.10.3	INTEGER	read-write	The WLAN STA WEP Key index of combination
STR wlanSTAWepKey	1.3.6.1.4.1.14125.2.2.10.4	DisplayString	read-write	The WLAN STA WEP Key combination. The input has to be 5,13,16 ascii keys, or 10,26,32 Hex keys
STR wlanSTAWpapskPassphrase	1.3.6.1.4.1.14125.2.2.10.5	DisplayString	read-write	The WLAN STA WPA Key combination
wlanmesh	1.3.6.1.4.1.14125.2.2.11
STR wlanMESHSSID	1.3.6.1.4.1.14125.2.2.11.1	DisplayString	read-write	The string of the WLAN SSID in MESH mode
INT wlanMESHGateway	1.3.6.1.4.1.14125.2.2.11.2	INTEGER	read-write	The Gateway IP address in MESH mode
INT wlanMESHAuth	1.3.6.1.4.1.14125.2.2.11.4	INTEGER	read-write	The authentication type in MESH mode
INT wlanMESHEncryption	1.3.6.1.4.1.14125.2.2.11.5	INTEGER	read-write	The encryption type in MESH mode
INT wlanMESHWepDefaultKeyIdx	1.3.6.1.4.1.14125.2.2.11.6	INTEGER	read-write	The WLAN WEP Key index of combination in MESH mode
STR wlanMESHWepKey	1.3.6.1.4.1.14125.2.2.11.7	DisplayString	read-write	The WLAN MESH WEP Key combination. The input has to be 5,13,16 ascii keys, or 10,26,32 Hex keys
STR wlanMESHWpapskPassphrase	1.3.6.1.4.1.14125.2.2.11.8	DisplayString	read-write	The WLAN WPA Key combination in MESH mode
wlanstawds	1.3.6.1.4.1.14125.2.2.14
INT staWDS	1.3.6.1.4.1.14125.2.2.14.1	INTEGER	read-write	Enable / Disable WDS link in Client Mode
stp	1.3.6.1.4.1.14125.2.2.15
INT stpMode	1.3.6.1.4.1.14125.2.2.15.1	INTEGER	read-write	Enable / Disable Spanning Tree
I32 stpHelloTime	1.3.6.1.4.1.14125.2.2.15.2	Integer32	read-write	The interval between periodic transmissions of Configuration Messages by Designated Ports. IEEE802.1D 17.13.6
I32 stpMaxAge	1.3.6.1.4.1.14125.2.2.15.3	Integer32	read-write	The maximum age of the information transmitted by the Bridge when it is the Root Bridge. IEEE 802.1D 17.13.8
I32 stpForwardDelay	1.3.6.1.4.1.14125.2.2.15.4	Integer32	read-write	The delay used by STP Bridges to transition Reoot and Designated Ports to Forwarding. IEEE 802.1D 17.13.5
I32 stpPriority	1.3.6.1.4.1.14125.2.2.15.5	Integer32	read-write	The manageable component of the Port Identifier. IEEE 802.1D 17.13.10
snmp	1.3.6.1.4.1.14125.2.2.16
INT snmpEnable	1.3.6.1.4.1.14125.2.2.16.1	INTEGER	read-write	Enable / Disable SNMP agent
STR snmpCmntyRO	1.3.6.1.4.1.14125.2.2.16.2	DisplayString	read-write	The communication string for Read Only
STR snmpCmntyRW	1.3.6.1.4.1.14125.2.2.16.3	DisplayString	read-write	The communication string for Read Write
IP snmpTrapDstIP	1.3.6.1.4.1.14125.2.2.16.4	IpAddress	read-write	The IP address which snmp trap sent to
STR snmpTrapCmnty	1.3.6.1.4.1.14125.2.2.16.5	DisplayString	read-write	The communication string for trap message
STR snmpCont	1.3.6.1.4.1.14125.2.2.16.6	DisplayString	read-write	The snmp contact information
STR snmpLocation	1.3.6.1.4.1.14125.2.2.16.7	DisplayString	read-write	The snmp location information
STR sysObjectID	1.3.6.1.4.1.14125.2.2.16.8	DisplayString	read-only	The SNMP company OID
wmm	1.3.6.1.4.1.14125.2.2.17
INT wmmEnable	1.3.6.1.4.1.14125.2.2.17.1	INTEGER	read-write	Enable / Disable WMM setting
logemail	1.3.6.1.4.1.14125.2.2.20
INT logServerEnable	1.3.6.1.4.1.14125.2.2.20.1	INTEGER	read-write	Enable / Disable remote log server which log sent to
IP logServerIP	1.3.6.1.4.1.14125.2.2.20.2	IpAddress	read-write	Remote log server IP address
INT logLocalEnable	1.3.6.1.4.1.14125.2.2.20.3	INTEGER	read-write	Enable / Disable local log server
INT logLevel	1.3.6.1.4.1.14125.2.2.20.4	INTEGER	read-write	The level (all/ Debug/ Information/ Notice/ Warning/ Error/ Critical/ Alert/ Emergency) of log message
vpn	1.3.6.1.4.1.14125.2.2.21
INT vpnPassthroughPPTP	1.3.6.1.4.1.14125.2.2.21.1	INTEGER	read-write	Enable / Disable PPTP packages pass through
INT vpnPassthroughL2TP	1.3.6.1.4.1.14125.2.2.21.2	INTEGER	read-write	Enable / Disable L2TP packages pass through
INT vpnPassthroughIPSec	1.3.6.1.4.1.14125.2.2.21.3	INTEGER	read-write	Enable / Disable IPSec packages pass through
traffic	1.3.6.1.4.1.14125.2.2.22
INT tcEnable	1.3.6.1.4.1.14125.2.2.22.1	INTEGER	read-write	Enable Traffic Shapping
I32 tcInRate	1.3.6.1.4.1.14125.2.2.22.2	Integer32	read-write	Incoming Traffic Limit, in kbits/s
I32 tcInBurst	1.3.6.1.4.1.14125.2.2.22.3	Integer32	read-write	Incoming Traffic Burst, in kBytes
I32 tcOutRate	1.3.6.1.4.1.14125.2.2.22.4	Integer32	read-write	Outgoing Traffic Limit, in kbits/s
I32 tcOutBurst	1.3.6.1.4.1.14125.2.2.22.5	Integer32	read-write	Outgoing Traffic Burst, in kBytes
command	1.3.6.1.4.1.14125.2.3
saveCmd	1.3.6.1.4.1.14125.2.3.1
I32 executeSaveCmd	1.3.6.1.4.1.14125.2.3.1.1	Integer32	read-write	SnmpSet with value 1 to execute the cfg_save() command.
resetCmd	1.3.6.1.4.1.14125.2.3.2
I32 executeResetCmd	1.3.6.1.4.1.14125.2.3.2.1	Integer32	read-write	SnmpSet with value 1 to execute the cfg_factory_default() command.
rebootCmd	1.3.6.1.4.1.14125.2.3.3
I32 executeRebootCmd	1.3.6.1.4.1.14125.2.3.3.1	Integer32	read-write	Define the timeout (1~300seconds) and execute the reboot command.

RFC description

Proprietary Senao/EnGenius MIB for managing IEEE 802.11 wireless devices including WLAN, WAN, and VPN configuration.

Start monitoring EnGenius (Senao) 802.11 wireless access point or router with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ENGENIUS-PRIVATE-MIB

What Is ENGENIUS-PRIVATE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description