A3COM-HUAWEI-DOT11-APMT-MIB

All MIBs › A3COM-HUAWEI-DOT11-APMT-MIB

Organization: Hangzhou H3C Technologies Co., Ltd.

Last Updated: 2010-10-11

Category: Vendor: H3C/HH3C, Wireless and WLAN

Description: Handles discovery, registration, and operational status of 802.11 access points on H3C wireless controllers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is A3COM-HUAWEI-DOT11-APMT-MIB?

A3COM-HUAWEI-DOT11-APMT-MIB is a Hangzhou H3C Technologies proprietary MIB reporting managed Access Point (AP) status under a Fit-AP/AC (Access Controller) wireless architecture. Its AP-object-status table, keyed by AP ID, records IP/IPv6 address, MAC address, operation status, AP template name, a reset action, CPU usage, connection type, last-image-download time, and last-register time, while a companion current-AP table tracks the AC port index, MAC mode, associated-station count, model name, and image name. As a status/performance MIB it lets an administrator confirm AP registration, CPU load, and associated-client count across a wireless LAN controlled by an H3C AC. It is deployed on H3C wireless LAN controllers and managed access points. Engineers can download the A3COM-HUAWEI-DOT11-APMT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-DOT11-APMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C wireless LAN controllers and managed access points

Monitoring Examples

An administrator checks h3cDot11APOperationStatus and h3cDot11APCpuUsage to confirm a managed access point registered correctly with the H3C wireless controller.

What Can Be Monitored

AP registration status, CPU load, and image/firmware state

Imported Objects

From A3COM-HUAWEI-DOT11-REF-MIB

H3cDot11ChannelScopeType
H3cDot11MACModeType
H3cDot11NotifyReasonType
H3cDot11ObjectIDType
H3cDot11RFModeType
H3cDot11RadioElementIndex
H3cDot11RadioScopeType
H3cDot11SSIDStringType
H3cDot11ServicePolicyIDType
H3cDot11TxPwrLevelScopeType
h3cDot11	MODULE-IDENTITY
h3cDot11APElementIndex	OBJECT-TYPE

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DateAndTime
MacAddress
TruthValue

How to Use in IPNetwork Monitor

Example using h3cDot11ChannelSwitchTimes OID:

Select an H3C wireless controller or access point as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type h3cDot11ChannelSwitchTimes into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Represents the channel switch times. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
C32 h3cDot11AckFailCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.7	Counter32	read-only	Represents the number of acknowledgement failures.
T/F h3cDot11AdminStatus	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.3	TruthValue	read-only	Represents the administrator status of radio.
C32 h3cDot11AllStationUpSumTime	1.3.6.1.4.1.43.45.1.10.2.75.2.2.3.1.8	Counter32	read-only	Represents the sum of duration of all stations which associate with this AP.
TIK h3cDot11AllStationUpSumTimeTicks	1.3.6.1.4.1.43.45.1.10.2.75.2.2.3.1.10	TimeTicks	read-only	Represents the sum of duration of all stations which associate with this AP.
TIK h3cDot11AllUserOnlineTime	1.3.6.1.4.1.43.45.1.10.2.75.2.2.24.1.6	TimeTicks	read-only	Represents the online time of all users authenticated successed with this AP.
I32 h3cDot11AntennaGain	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.8	Integer32	read-only	Represents the current gain for antenna.
OCT h3cDot11AntennaType	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.15	OCTET STRING	read-only	Represents type of the antenna which radio used.
INT h3cDot11APACAssociateStatus	1.3.6.1.4.1.43.45.1.10.2.75.2.1.8.1.7	INTEGER	read-only	Represents associate status of AP and AC.
INT h3cDot11APACAssociateStatus2	1.3.6.1.4.1.43.45.1.10.2.75.2.1.10.1.7	INTEGER	read-only	Represents associate status of AP and AC.
C32 h3cDot11APAssocFailStatis2Cnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.16.1.2	Counter32	read-only	Represents the total count of association fails for this AP.
h3cDot11APAssocFailStatis2Entry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.16.1		not-accessible	Each entry will provide statistic of association fails for this ap.
h3cDot11APAssocFailStatis2Table	1.3.6.1.4.1.43.45.1.10.2.75.2.2.16		not-accessible	This table will provide statistic of association fails for each ap.
INT h3cDot11APAssocFailStatis2Type	1.3.6.1.4.1.43.45.1.10.2.75.2.2.16.1.1	INTEGER	not-accessible	Represents the type of association fails for this AP
h3cDot11APAssocFailStatis3Entry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.22.1		not-accessible	Each entry will provide statistic of association failure with this AP because of different reasons.
C32 h3cDot11APAssocFailStatis3NSRCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.22.1.2	Counter32	read-only	This object represents the count of association failure because of not support rate set.
C32 h3cDot11APAssocFailStatis3OtherCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.22.1.5	Counter32	read-only	This object represents the count of association fails because of reason not in 802.11 the protocol.
C32 h3cDot11APAssocFailStatis3RFCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.22.1.4	Counter32	read-only	This object represents the count of association failure because of re-associate failed.
C32 h3cDot11APAssocFailStatis3SRCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.22.1.1	Counter32	read-only	This object represents the count of association failure because of lack of resource.
h3cDot11APAssocFailStatis3Table	1.3.6.1.4.1.43.45.1.10.2.75.2.2.22		not-accessible	This table will provide statistic of association fails for each AP.
C32 h3cDot11APAssocFailStatis3URCCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.22.1.3	Counter32	read-only	This object represents the count of association failure because of unknown reason code.
C32 h3cDot11APAssocFailStatisCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.11.1.2	Counter32	read-only	Represents the total number of each type for association failure on this AP.
h3cDot11APAssocFailStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.11.1		not-accessible	Each entry of the table will provide the association failure statistic for this AP.
h3cDot11APAssocFailStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.11		not-accessible	The table will provide the association failure statistic for this AP.
INT h3cDot11APAssocFailStatisType	1.3.6.1.4.1.43.45.1.10.2.75.2.2.11.1.1	INTEGER	not-accessible	Represents the type of association failure with this AP.
h3cDot11APAssocStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.3.1		not-accessible	Each entry of the table will provide the statistic data of station association for AP.
h3cDot11APAssocStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.3		not-accessible	The table will provide the station association statistic for AP.
C32 h3cDot11APAuthFailStatisCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.10.1.2	Counter32	read-only	Represents the total number of each type for authentication failure on this AP.
h3cDot11APAuthFailStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.10.1		not-accessible	Each entry of the table will provide the authentication failure statistic for this AP.
h3cDot11APAuthFailStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.10		not-accessible	The table will provide the authentication failure statistic for this AP.
INT h3cDot11APAuthFailStatisType	1.3.6.1.4.1.43.45.1.10.2.75.2.2.10.1.1	INTEGER	not-accessible	Represents the type of authentication failure with this AP.
h3cDot11APBSSEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.1.4.1		not-accessible	Each entry contains information of each BSS for specific radio.
h3cDot11APBSSTable	1.3.6.1.4.1.43.45.1.10.2.75.2.1.4		not-accessible	After AP connect to AC and get AP template configuration, it will create BSS data structure for each radio. The table will describe BSS information of AP and service policy as per BSS.
H3C h3cDot11APChannelChgMode	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.5	H3cDot11RFModeType	accessible-for-notify	Represents the channel change mode for a radio.
INT h3cDot11APChgWorkMode	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.6	INTEGER	accessible-for-notify	Represents what work mode for AP. The following values are supported: normal(1) - AP will supply WLAN service. monitor(2) - AP will be a monitor to detect attack. hybrid(3) - AP will supply WLAN service and detect attack.
I32 h3cDot11APConfigBSSIDNum	1.3.6.1.4.1.43.45.1.10.2.75.2.1.7.1.3	Integer32	read-only	Represents the number of BSSID that be configured with current SSID.
I32 h3cDot11APConfigPortalStaNum	1.3.6.1.4.1.43.45.1.10.2.75.2.1.7.1.4	Integer32	read-only	Represents the total number of associated protal stations with current SSID.
H3C h3cDot11APConfigSPID	1.3.6.1.4.1.43.45.1.10.2.75.2.1.7.1.1	H3cDot11ServicePolicyIDType	not-accessible	Represents the service policy ID.
STR h3cDot11APConfigSSIDName	1.3.6.1.4.1.43.45.1.10.2.75.2.1.7.1.2	H3cDot11SSIDStringType	read-only	Represents the SSID name of this service policy.
INT h3cDot11APConnectionType	1.3.6.1.4.1.43.45.1.10.2.75.2.1.1.1.8	INTEGER	read-only	Represents the current connection type.
I32 h3cDot11APCPUAvgUsage	1.3.6.1.4.1.43.45.1.10.2.75.2.1.8.1.3	Integer32	read-only	Represents the CPU average usage for AP.
I32 h3cDot11APCPUAvgUsage2	1.3.6.1.4.1.43.45.1.10.2.75.2.1.10.1.3	Integer32	read-only	Represents the CPU average usage for AP.
U32 h3cDot11APCPUClockSpeed	1.3.6.1.4.1.43.45.1.10.2.75.2.1.5.1.8	Unsigned32	read-only	Represents the clock speed of CPU.
I32 h3cDot11APCPURTUsage	1.3.6.1.4.1.43.45.1.10.2.75.2.1.8.1.2	Integer32	read-only	Represents the CPU real time usage for AP.
I32 h3cDot11APCPURTUsage2	1.3.6.1.4.1.43.45.1.10.2.75.2.1.10.1.2	Integer32	read-only	Represents the CPU real time usage for AP.
OCT h3cDot11APCPUType	1.3.6.1.4.1.43.45.1.10.2.75.2.1.5.1.7	OCTET STRING	read-only	Represents the CPU type of AP
I32 h3cDot11APCpuUsage	1.3.6.1.4.1.43.45.1.10.2.75.2.1.1.1.7	Integer32	read-only	Represents the current CPU usage for AP.
NTF h3cDot11APCpuUsageHigh	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.28			The notification will be sent when the AP CPU usage exceeds the threshold.
NTF h3cDot11APCpuUsageHighRecover	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.29			The notification will be sent when the AP CPU usage descends the threshold.
C32 h3cDot11APDeassocStatisCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.15.1.2	Counter32	read-only	Represents the total number of each type for de-association with this AP.
h3cDot11APDeassocStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.15.1		not-accessible	Each entry of the table will provide the de-association statistic for this AP.
h3cDot11APDeassocStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.15		not-accessible	The table will provide the de-association statistic for this AP.
INT h3cDot11APDeassocStatisType	1.3.6.1.4.1.43.45.1.10.2.75.2.2.15.1.1	INTEGER	not-accessible	Represents the type of de-association with this AP.
C32 h3cDot11APDeauthStatisCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.14.1.2	Counter32	read-only	Represents the total number of each type for de-authentication with this AP.
h3cDot11APDeauthStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.14.1		not-accessible	Each entry of the table will provide the de-authentication statistic for this AP.
h3cDot11APDeauthStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.14		not-accessible	The table will provide the de-authentication statistic for this AP.
INT h3cDot11APDeauthStatisType	1.3.6.1.4.1.43.45.1.10.2.75.2.2.14.1.1	INTEGER	not-accessible	Represents the type of de-authentication for this AP.
I32 h3cDot11APEchoAvgDelay	1.3.6.1.4.1.43.45.1.10.2.75.2.2.28.1.1	Integer32	read-only	This object represents the average time delay of heart beat in this AP.
h3cDot11APEchoInfoStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.28.1		not-accessible	Each entry of the table will provide the Echo statistic of this AP.
C64 h3cDot11APEchoRequestCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.28.1.2	Counter64	read-only	This object represents the count of echo request in this AP.
C64 h3cDot11APEchoRespLossCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.28.1.3	Counter64	read-only	This object represents the loss count of echo response in this AP.
h3cDot11APEchoStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.28		not-accessible	The table will provide the Echo statistic of this AP.
I32 h3cDot11APEssVlanId	1.3.6.1.4.1.43.45.1.10.2.75.2.1.4.1.6	Integer32	read-only	This object represents the VlanID of the interface ESS corresponding to this BSS.
U32 h3cDot11APFlashFreeSize	1.3.6.1.4.1.43.45.1.10.2.75.2.1.8.1.9	Unsigned32	read-only	Represents the free size of AP flash card.
U32 h3cDot11APFlashFreeSize2	1.3.6.1.4.1.43.45.1.10.2.75.2.1.10.1.9	Unsigned32	read-only	Represents the free size of AP flash card.
U32 h3cDot11APFlashSize	1.3.6.1.4.1.43.45.1.10.2.75.2.1.5.1.12	Unsigned32	read-only	Represents the size of AP flash card.
U32 h3cDot11APFlashSizeInBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.1.5.1.14	Unsigned32	read-only	This object represents the size of AP flash card in bytes.
OCT h3cDot11APFlashType	1.3.6.1.4.1.43.45.1.10.2.75.2.1.5.1.11	OCTET STRING	read-only	Represents the flash card type of AP
NTF h3cDot11APFlashWriteFailure	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.11			The notification will be sent when AP failed to write data into flash.
H3C h3cDot11APID	1.3.6.1.4.1.43.45.1.10.2.75.2.1.1.1.1	H3cDot11ObjectIDType	accessible-for-notify	To uniquely identify each AP, and relation-ship between h3cDot11APID and AP device will be static.
h3cDot11APIdleListEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.1.9.1		not-accessible	Each entry provides information of a idle AP.
h3cDot11APIdleListTable	1.3.6.1.4.1.43.45.1.10.2.75.2.1.9		not-accessible	This table provides the list of idle AP.
OCT h3cDot11APIdleSerialID	1.3.6.1.4.1.43.45.1.10.2.75.2.1.9.1.2	OCTET STRING	read-only	Represents AP serial ID.
OCT h3cDot11APIdleTemplateName	1.3.6.1.4.1.43.45.1.10.2.75.2.1.9.1.1	OCTET STRING	not-accessible	Represents the name of idle AP template.
OCT h3cDot11APIfDescr	1.3.6.1.4.1.43.45.1.10.2.75.2.1.6.1.2	OCTET STRING	read-only	Represents the interface description for a interface.
h3cDot11APIfEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.1.6.1		not-accessible	Each entry of the table will provide data for the interface of AP.
U32 h3cDot11APIfFlowIN	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.8	Unsigned32	read-only	Represents the traffic rate (byte/s) on the downlink interface during a sampling period.
U32 h3cDot11APIfFlowIN2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.8	Unsigned32	read-only	Represents the traffic rate (byte/s) on the downlink interface during a sampling period.
U32 h3cDot11APIfFlowOut	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.7	Unsigned32	read-only	Represents the traffic rate (byte/s) on the uplink interface during a sampling period.
U32 h3cDot11APIfFlowOut2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.7	Unsigned32	read-only	Represents the traffic rate (byte/s) on the uplink interface during a sampling period.
C64 h3cDot11APIfInBrdcastPkts	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.19	Counter64	read-only	Represents the number of broadcast packets received on the interface.
C64 h3cDot11APIfInBrdcastPkts2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.19	Counter64	read-only	Represents the number of broadcast packets received on the interface.
C64 h3cDot11APIfInDataOctets2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.25	Counter64	read-only	Represents the number of actual data octets received on the interface.
I32 h3cDot11APIfInDataRate	1.3.6.1.4.1.43.45.1.10.2.75.2.1.6.1.7	Integer32	read-only	Represents the average input data rate of this interface in latest 300 seconds.
I32 h3cDot11APIfIndex	1.3.6.1.4.1.43.45.1.10.2.75.2.1.6.1.1	Integer32	not-accessible	Represents the index for a interface.
C32 h3cDot11APIfInDiscardPkts	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.11	Counter32	read-only	Represents the number of unicast packets discarded on the interface.
C64 h3cDot11APIfInDiscardPkts2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.11	Counter64	read-only	Represents the number of unicast packets discarded on the interface.
C32 h3cDot11APIfInErrorPkts	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.3	Counter32	read-only	Represents the total number of error packets received on the interface.
C64 h3cDot11APIfInErrorPkts2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.3	Counter64	read-only	Represents the total number of error packets received on the interface.
C64 h3cDot11APIfInMulcastPkts	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.21	Counter64	read-only	Represents the number of multicast packets received on the interface.
C64 h3cDot11APIfInMulcastPkts2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.21	Counter64	read-only	Represents the number of multicast packets received on the interface.
C32 h3cDot11APIfInNormalPkts	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.2	Counter32	read-only	Represents the total number of correct packets received on the interface.
C64 h3cDot11APIfInNormalPkts2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.2	Counter64	read-only	Represents the total number of correct packets received on the interface.
C32 h3cDot11APIfInNUcastPkts	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.10	Counter32	read-only	Represents the number of non-unicast packets received on the wired interface.
C64 h3cDot11APIfInNUcastPkts2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.10	Counter64	read-only	Represents the number of non-unicast packets received on the wired interface.
C32 h3cDot11APIfInOctets	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.5	Counter32	read-only	Represents the total number of octets received on the interface.
C64 h3cDot11APIfInOctets2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.5	Counter64	read-only	Represents the total number of octets received on the interface.
C64 h3cDot11APIfInPayloadOctets	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.23	Counter64	read-only	Represents the number of actual octets received on the interface.
C64 h3cDot11APIfInPayloadOctets2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.23	Counter64	read-only	Represents the number of actual octets received on the interface.
C32 h3cDot11APIfInPkts	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.1	Counter32	read-only	Represents the total number of packets received on the interface.
C64 h3cDot11APIfInPkts2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.1	Counter64	read-only	Represents the total number of packets received on the interface.
C32 h3cDot11APIfInUcastPkts	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.9	Counter32	read-only	Represents the number of unicast packets received on the interface.
C64 h3cDot11APIfInUcastPkts2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.9	Counter64	read-only	Represents the number of unicast packets received on the interface.
I32 h3cDot11APIfMtu	1.3.6.1.4.1.43.45.1.10.2.75.2.1.6.1.4	Integer32	read-write	Represents size of the largest datagram which can be sent/received on the interface, specified in octets.
INT h3cDot11APIfOperStatus	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.18	INTEGER	read-only	Represents the operational state of the interface.
INT h3cDot11APIfOperStatus2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.18	INTEGER	read-only	Represents the operational state of the interface.
C64 h3cDot11APIfOutBrdcastPkts	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.20	Counter64	read-only	Represents the number of broadcast packets sent on the interface.
C64 h3cDot11APIfOutBrdcastPkts2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.20	Counter64	read-only	Represents the number of broadcast packets sent on the interface.
C64 h3cDot11APIfOutDataOctets2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.26	Counter64	read-only	Represents the number of actual data octets sent on the interface.
I32 h3cDot11APIfOutDataRate	1.3.6.1.4.1.43.45.1.10.2.75.2.1.6.1.8	Integer32	read-only	Represents the average output data rate of this interface in latest 300 seconds.
C32 h3cDot11APIfOutDiscardPkts	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.14	Counter32	read-only	Represents the number of discarded packets send on the interface.
C64 h3cDot11APIfOutDiscardPkts2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.14	Counter64	read-only	Represents the number of discarded packets send on the interface.
C32 h3cDot11APIfOutErrorPkts	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.15	Counter32	read-only	Represents the number of error packets send on the interface.
C64 h3cDot11APIfOutErrorPkts2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.15	Counter64	read-only	Represents the number of error packets send on the interface.
C64 h3cDot11APIfOutMulcastPkts	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.22	Counter64	read-only	Represents the number of multicast packets sent on the interface.
C64 h3cDot11APIfOutMulcastPkts2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.22	Counter64	read-only	Represents the number of multicast packets sent on the interface.
C32 h3cDot11APIfOutNUcastPkts	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.13	Counter32	read-only	Represents the number of non-unicast packets send on the interface.
C64 h3cDot11APIfOutNUcastPkts2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.13	Counter64	read-only	Represents the number of non-unicast packets send on the interface.
C32 h3cDot11APIfOutOctets	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.6	Counter32	read-only	Represents the total number of octets sent from the interface.
C64 h3cDot11APIfOutOctets2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.6	Counter64	read-only	Represents the total number of octets sent from the interface.
C64 h3cDot11APIfOutPayloadOctets	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.24	Counter64	read-only	Represents the number of actual octets sent on the interface.
C64 h3cDot11APIfOutPayloadOctets2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.24	Counter64	read-only	Represents the number of actual octets sent on the interface.
C32 h3cDot11APIfOutPkts	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.4	Counter32	read-only	Represents the total number of packets sent from the interface.
C64 h3cDot11APIfOutPkts2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.4	Counter64	read-only	Represents the total number of packets sent from the interface.
C32 h3cDot11APIfOutUcastPkts	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.12	Counter32	read-only	Represents the number of unicast packets send on the interface.
C64 h3cDot11APIfOutUcastPkts2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.12	Counter64	read-only	Represents the number of unicast packets send on the interface.
OCT h3cDot11APIfPHYAddress	1.3.6.1.4.1.43.45.1.10.2.75.2.1.6.1.5	OCTET STRING	read-only	Represents the PHY address of interface.
I32 h3cDot11APIfSpeed	1.3.6.1.4.1.43.45.1.10.2.75.2.1.6.1.6	Integer32	read-only	Represents maximum bandwidth of this interface.
G32 h3cDot11APIfSpeedKbps	1.3.6.1.4.1.43.45.1.10.2.75.2.1.6.1.9	Gauge32	read-only	Represents maximum bandwidth of this interface.
h3cDot11APIfStatisByAPIDEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1		not-accessible	Each entry of the table will provide statistics on the interface of the AP.
h3cDot11APIfStatisByAPIDTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23		not-accessible	The table will provide the statistics on the interface of the AP.
h3cDot11APIfStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1		not-accessible	Each entry of the table will provide statistics on the interface of the AP.
h3cDot11APIfStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17		not-accessible	The table will provide the statistics on the interface of the AP.
TIK h3cDot11APIfStatusKeepTime	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.17	TimeTicks	read-only	Represents the last change time on the interface.
TIK h3cDot11APIfStatusKeepTime2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.17	TimeTicks	read-only	Represents the last change time on the interface.
h3cDot11APIfTable	1.3.6.1.4.1.43.45.1.10.2.75.2.1.6		not-accessible	This table represents the AP interface informations.
I32 h3cDot11APIfType	1.3.6.1.4.1.43.45.1.10.2.75.2.1.6.1.3	Integer32	read-only	Represents the interface type for a interface.
C32 h3cDot11APIfUpdownTimes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.17.1.16	Counter32	read-only	Represents the up/down times on the interface.
C32 h3cDot11APIfUpdownTimes2	1.3.6.1.4.1.43.45.1.10.2.75.2.2.23.1.16	Counter32	read-only	Represents the up/down times on the interface.
NTF h3cDot11APImgDwldSuccess	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.14			The notification will be sent when AP succeeds to download image from AC.
NTF h3cDot11APInterfClearTrap	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.16			This notification will be sent when interference caused by ambient APs on the current channel disappears.
NTF h3cDot11APInterfDetectedTrap	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.15			This notification will be sent when some ambient AP interferes with current channel.
MAC h3cDot11APIntfDevMACAddress	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.7	MacAddress	accessible-for-notify	Represents MAC address of the device which triggers the notification.
IP h3cDot11APIPAddress	1.3.6.1.4.1.43.45.1.10.2.75.2.1.1.1.2	IpAddress	read-only	Represents the IP address of an AP.
IP h3cDot11APIPAddressGateway	1.3.6.1.4.1.43.45.1.10.2.75.2.1.8.1.6	IpAddress	read-only	Represents the IP address gateway for AP.
IP h3cDot11APIPAddressGateway2	1.3.6.1.4.1.43.45.1.10.2.75.2.1.10.1.6	IpAddress	read-only	Represents the IP address gateway for AP.
OCT h3cDot11APIPv6Address	1.3.6.1.4.1.43.45.1.10.2.75.2.1.1.1.10	OCTET STRING	read-only	Represents the IPv6 address of AP.
DAT h3cDot11APLastImgDownloadTime	1.3.6.1.4.1.43.45.1.10.2.75.2.1.1.1.9	DateAndTime	read-only	Represents the time at which the device last downloaded image.
DAT h3cDot11APLastRegisterTime	1.3.6.1.4.1.43.45.1.10.2.75.2.1.1.1.11	DateAndTime	read-only	Represents the time at which the device last registered with AC.
h3cDot11APLinkStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.7.1		not-accessible	Each entry provides the link statistic of the AP.
h3cDot11APLinkStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.7		not-accessible	The table will provide the link statistic for AP.
MAC h3cDot11APMacAddress	1.3.6.1.4.1.43.45.1.10.2.75.2.1.1.1.3	MacAddress	read-only	Represents the MAC address of an AP.
MAC h3cDot11APMacAddress2	1.3.6.1.4.1.43.45.1.10.2.75.2.1.10.1.11	MacAddress	read-only	Represents the MAC address of AP.
OCT h3cDot11APManuBuildInfo	1.3.6.1.4.1.43.45.1.10.2.75.2.1.8.1.8	OCTET STRING	read-only	Represents the device version information for AP.
OCT h3cDot11APManuBuildInfo2	1.3.6.1.4.1.43.45.1.10.2.75.2.1.10.1.8	OCTET STRING	read-only	Represents the device version information for AP.
OCT h3cDot11APManufacturer	1.3.6.1.4.1.43.45.1.10.2.75.2.1.5.1.6	OCTET STRING	read-only	By the 'SMI Network Management Private Enterprise Codes' assigned by the IANA, NMS could know which vendor manufactures the AP.
I32 h3cDot11APMemAvgUsage	1.3.6.1.4.1.43.45.1.10.2.75.2.1.8.1.5	Integer32	read-only	Represents the average memory usage for AP.
I32 h3cDot11APMemAvgUsage2	1.3.6.1.4.1.43.45.1.10.2.75.2.1.10.1.5	Integer32	read-only	Represents the average memory usage for AP.
U32 h3cDot11APMemorySize	1.3.6.1.4.1.43.45.1.10.2.75.2.1.5.1.20	Unsigned32	read-only	Represents the size of AP memory card.
OCT h3cDot11APMemoryType	1.3.6.1.4.1.43.45.1.10.2.75.2.1.5.1.9	OCTET STRING	read-only	Represents the memory card type of AP
I32 h3cDot11APMemRTUsage	1.3.6.1.4.1.43.45.1.10.2.75.2.1.8.1.4	Integer32	read-only	Represents the memory real time usage for AP.
I32 h3cDot11APMemRTUsage2	1.3.6.1.4.1.43.45.1.10.2.75.2.1.10.1.4	Integer32	read-only	Represents the memory real time usage for AP.
G32 h3cDot11APMemSize	1.3.6.1.4.1.43.45.1.10.2.75.2.1.5.1.13	Gauge32	read-only	Represents the size of AP memory card.
NTF h3cDot11APMemUsageHigh	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.30			The notification will be sent when the AP memory usage exceeds the threshold.
NTF h3cDot11APMemUsageHighRecover	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.31			The notification will be sent when the AP memory usage descends the threshold.
OCT h3cDot11APModelAlias	1.3.6.1.4.1.43.45.1.10.2.75.2.1.5.1.1	OCTET STRING	not-accessible	Represents alias of AP model name.
h3cDot11APModelEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.1.5.1		not-accessible	Each entry contains capability information for a specific kind of AP.
OCT h3cDot11APModelName	1.3.6.1.4.1.43.45.1.10.2.75.2.1.5.1.2	OCTET STRING	read-only	Represents AP model name(like WA2100).
h3cDot11APModelTable	1.3.6.1.4.1.43.45.1.10.2.75.2.1.5		not-accessible	The table defines the capability information for a specific kind of AP.
NTF h3cDot11APModuleTroubleClearTrap	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.22			The notification will be sent when WLAN module recovered.
NTF h3cDot11APModuleTroubleTrap	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.21			This notification will be sent when WLAN module failed.
h3cDot11APMT	1.3.6.1.4.1.43.45.1.10.2.75.2			This MIB provides AP information which includes AP current object information, AP statistic data. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Association The service used to establish access point or station mapping and enable STA invocation of the distribution system services. (Wireless clients attempt to connect to access points.) Basic Rate A data rate that is mandatory for client devices to support in order for them to achieve successful association.
H3C h3cDot11APMtAdjChannel	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.22	H3cDot11ChannelScopeType	accessible-for-notify	Represents the adjacent channel of radio.
H3C h3cDot11APMtAPID	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.18	H3cDot11ObjectIDType	accessible-for-notify	To uniquely identify each AP.
NTF h3cDot11APMtAvailChlTooLow	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.13			The notification will be sent when number of available channels is too low.
NTF h3cDot11APMtCfgErrorTrap	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.2			The notification will represent errors caused by the configuration operation of AP.
I32 h3cDot11APMtChanlChgCount	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.16	Integer32	accessible-for-notify	Represents how many times that channel changed.
H3C h3cDot11APMtChannel	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.20	H3cDot11ChannelScopeType	accessible-for-notify	Represents the current channel allocation for radio.
NTF h3cDot11APMtChlIntfDetected	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.7			The notification will be sent when some ambient device interferes with current channel.
NTF h3cDot11APMtDetectedIntfAP	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.33			This notification will be sent when some ambient AP interferes with current channel.
NTF h3cDot11APMtDetectedIntfOtherDev	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.35			This notification will be sent when other device interferes with current channel.
NTF h3cDot11APMtDetectedIntfSTA	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.34			This notification will be sent when some ambient STA interferes with current channel.
TIK h3cDot11APMtFirstTrapTime	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.23	TimeTicks	accessible-for-notify	Represents the first trap time.
OCT h3cDot11APMtFormerApVersion	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.17	OCTET STRING	accessible-for-notify	Represents former software version of AP.
MAC h3cDot11APMtInterfMacAdd	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.21	MacAddress	accessible-for-notify	Represents the MAC address of an AP.
NTF h3cDot11APMtIntfAPDetected	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.8			The notification will be sent when some ambient AP interferes with current channel.
NTF h3cDot11APMtIntfStaDetected	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.9			The notification will be sent when some ambient station interferes with current channel.
NTF h3cDot11APMtIPChange	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.10			The notification will be sent when IP address of the AP changes.
h3cDot11APMtNotifyGroup	1.3.6.1.4.1.43.45.1.10.2.75.2.3
NTF h3cDot11APMtRadioFailRecoverTrap	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.4			The notification will notify the operational status of which radio becomes up again.
NTF h3cDot11APMtRadioFailTrap	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.3			The notification will notify which the operational status of radio becomes down.
H3C h3cDot11APMtRadioID	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.19	H3cDot11RadioScopeType	accessible-for-notify	Represents each radio.
NTF h3cDot11APMtRdoChanlChgTrap	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.5			The notification will represent which radio changes the channel.
NTF h3cDot11APMtTimeSynFail	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.6			The notification will be sent when AC and AP failed to synchronize their time.
H3C h3cDot11APMtTrapCfgErrReason	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.1	H3cDot11NotifyReasonType	accessible-for-notify	Represents errors caused by configuration operation.
H3C h3cDot11APMtTrapNewChannel	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.4	H3cDot11ChannelScopeType	accessible-for-notify	Represents which channel the radio will use.
H3C h3cDot11APMtTrapOldChannel	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.3	H3cDot11ChannelScopeType	accessible-for-notify	Represents which channel the radio used to use.
IP h3cDot11APMtTrapOldIPAddr	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.8	IpAddress	accessible-for-notify	Represents the IP address of AP.
INT h3cDot11APMtTrapRadioFailReason	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.2	INTEGER	accessible-for-notify	Represents errors caused by configuration operation. The following values are supported: config(1) - Configuration error hwerror(2) - Hardware error swerror(3) - Software error radar(4) - Radar Detection unknown(8) - Unknown reason
h3cDot11APMtTraps	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0
h3cDot11APMtTrapVarObjects	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1
NTF h3cDot11APMtWorkModeChgTrap	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.1			The notification will be sent when AP changes the work mode, and h3cDot11APWorkMode suggests which work mode will be used by AP.
h3cDot11APObjectEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1		not-accessible	Each entry contains information of an AP in run status.
h3cDot11APObjectGroup	1.3.6.1.4.1.43.45.1.10.2.75.2.1
h3cDot11APObjectStatusEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.1.1.1		not-accessible	Each entry contains the general information of an AP.
h3cDot11APObjectStatusTable	1.3.6.1.4.1.43.45.1.10.2.75.2.1.1		not-accessible	The table will provide the general information about APs in different status.
h3cDot11APObjectTable	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2		not-accessible	The table will provide information for APs in the running status.
H3C h3cDot11APObjID	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.1	H3cDot11ObjectIDType	not-accessible	To uniquely identify each AP, and relation-ship between h3cDot11APObjID and AP device will be static.
INT h3cDot11APOperationStatus	1.3.6.1.4.1.43.45.1.10.2.75.2.1.1.1.4	INTEGER	read-only	Represents operational status of AP. The following values are supported: join(1) - AP is joining to AC. joinConfirm(2) - AC confirm whether permit AP to join. download(3) - AP is downloading software from AC. config(4) - AP and AC exchange configuration before AP - provide WLAN service. run(5) - The WLAN service is ready.
I32 h3cDot11APPacketMCSRate	1.3.6.1.4.1.43.45.1.10.2.75.2.2.21.1.1	Integer32	not-accessible	Represents transmit data rate(twice as actual rate).
h3cDot11APPacketMCSRateStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.21.1		not-accessible	Each entry provides packets statistic base on MCS rate for each radio of a specific AP.
h3cDot11APPacketMCSRateStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.21		not-accessible	This table provides packets statistic base on MCS rate.
I32 h3cDot11APPacketRate	1.3.6.1.4.1.43.45.1.10.2.75.2.2.20.1.1	Integer32	not-accessible	Represents transmit data rate(twice as actual rate).
h3cDot11APPacketRateStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.20.1		not-accessible	Each entry provides packets statistic base on rate for each radio of a specific AP.
h3cDot11APPacketRateStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.20		not-accessible	This table provides packets statistic base on rate.
INT h3cDot11APPacketSize	1.3.6.1.4.1.43.45.1.10.2.75.2.2.19.1.1	INTEGER	not-accessible	This node represents packet size: sizeLevel1 : size 1024
h3cDot11APPacketSizeStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.19.1		not-accessible	Each entry provides packets statistic base on size for each radio of a specific AP.
h3cDot11APPacketSizeStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.19		not-accessible	This table provides packets statistic base on size.
INT h3cDot11APRadioDownReason	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.12	INTEGER	accessible-for-notify	Reports the reason why WLAN links is interrupted.
NTF h3cDot11APRadioDownRecovTrap	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.24			This notification will be sent when WLAN links recover.
NTF h3cDot11APRadioDownTrap	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.23			This notification will be sent when WLAN links interrupted.
h3cDot11APRadioEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1		not-accessible	Each entry contains the information of each radio of a specific AP.
I32 h3cDot11APRadioIfIndex	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.7	Integer32	read-only	Represents the interface index for the radio.
h3cDot11APRadioTable	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3		not-accessible	The table will describe the radio information of AP. The AP here will be in running status.
C32 h3cDot11APReassocFailStatis2Cnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.26.1.1	Counter32	read-only	This object represents the count of reassociation failure because of lack of resource.
h3cDot11APReassocStatis2Entry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.26.1		not-accessible	Each entry will provide statistic of reassociation with this AP because of different reasons.
h3cDot11APReassocStatis2Table	1.3.6.1.4.1.43.45.1.10.2.75.2.2.26		not-accessible	This table will provide statistic of reassociation for each AP.
C32 h3cDot11APReassocStatisCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.12.1.2	Counter32	read-only	Represents the total number of each type for re-association with this AP.
h3cDot11APReassocStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.12.1		not-accessible	Each entry of the table will provide the re-association statistic for this AP.
h3cDot11APReassocStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.12		not-accessible	The table will provide the re-association statistic for this AP.
INT h3cDot11APReassocStatisType	1.3.6.1.4.1.43.45.1.10.2.75.2.2.12.1.1	INTEGER	not-accessible	Represents the type of re-association with this AP.
T/F h3cDot11APReset	1.3.6.1.4.1.43.45.1.10.2.75.2.1.1.1.6	TruthValue	read-write	When read the value from the node 2: Represents the AP can not be reseted. 1: Represents the AP can be reseted. When write the value to the node 1: Represents reseting the AP. Other values are not supported
C64 h3cDot11APRXPacketMCSRateCount	1.3.6.1.4.1.43.45.1.10.2.75.2.2.21.1.2	Counter64	read-only	Represents the count of packets reception base on transmit data rate.
C64 h3cDot11APRXPacketRateCount	1.3.6.1.4.1.43.45.1.10.2.75.2.2.20.1.2	Counter64	read-only	Represents the count of packets reception base on transmit data rate.
C64 h3cDot11APRXPacketSizeCount	1.3.6.1.4.1.43.45.1.10.2.75.2.2.19.1.2	Counter64	read-only	Represents the count of packets reception base on frame size.
h3cDot11APRxStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1		not-accessible	Each entry of the table will provide the statistic data for each radio of a specific AP.
h3cDot11APRxStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1		not-accessible	The table will provide the receiving statistic for a specific radio of AP.
h3cDot11APSSIDObjectEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.1.7.1		not-accessible	Each entry provides BSSID number configuration information of a SSID.
h3cDot11APSSIDObjectTable	1.3.6.1.4.1.43.45.1.10.2.75.2.1.7		not-accessible	This table provides BSSID number configuration information based on SSID.
I32 h3cDot11ApStaCurAuthSuccSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.3.1.7	Integer32	read-only	Represents the successful number of station authentication with this AP.
NTF h3cDot11APStaFullRecoverTrap	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.26			This notification will be sent when STA number recover enough level.
NTF h3cDot11APStaFullTrap	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.25			This notification will be sent when STA number reach limit number.
C32 h3cDot11ApStationAssocFailSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.3.1.2	Counter32	read-only	Represents the total number of station association failure with this AP.
C32 h3cDot11ApStationAssocRejectSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.3.1.4	Counter32	read-only	Represents the total number of station association rejected on account of resource limit with this AP.
C32 h3cDot11ApStationAssocReqSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.3.1.9	Counter32	read-only	Represents the number of station association request with this AP.
C32 h3cDot11ApStationAssocSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.3.1.1	Counter32	read-only	Represents the total number of station association with this AP.
I32 h3cDot11ApStationCurAssocSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.3.1.6	Integer32	read-only	Represents the total number of current associated stations with this AP.
C32 h3cDot11ApStationExDeAuthenSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.3.1.5	Counter32	read-only	Represents the total number of exceptional station deauthentication (Without sending a deauthentication to AP) with this AP.
C32 h3cDot11ApStationReassocSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.3.1.3	Counter32	read-only	Represents the total number of station reassociation with this AP.
h3cDot11APStatisGroup	1.3.6.1.4.1.43.45.1.10.2.75.2.2
h3cDot11APSysInfoByAPIDEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.1.10.1		not-accessible	Each entry provides system information of an AP.
h3cDot11APSysInfoByAPIDTable	1.3.6.1.4.1.43.45.1.10.2.75.2.1.10		not-accessible	The table provides the system information of the AP.
h3cDot11APSysInfoEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.1.8.1		not-accessible	Each entry provides system information of an AP.
h3cDot11APSysInfoTable	1.3.6.1.4.1.43.45.1.10.2.75.2.1.8		not-accessible	The table provides the system information of the AP.
NTF h3cDot11APSysReboot	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.12			The notification will be sent when AP reboots.
TIK h3cDot11APSysUpTime	1.3.6.1.4.1.43.45.1.10.2.75.2.1.8.1.1	TimeTicks	read-only	Represents how long AP has been powered on.
TIK h3cDot11APSysUpTime2	1.3.6.1.4.1.43.45.1.10.2.75.2.1.10.1.1	TimeTicks	read-only	Represents how long AP has been powered on.
INT h3cDot11APTemperature	1.3.6.1.4.1.43.45.1.10.2.75.2.1.8.1.10	INTEGER	read-only	Represents the device temperature information for AP.
I32 h3cDot11APTemperature2	1.3.6.1.4.1.43.45.1.10.2.75.2.1.10.1.10	Integer32	read-only	Represents the device temperature information for AP.
OCT h3cDot11APTemplateNameOfAP	1.3.6.1.4.1.43.45.1.10.2.75.2.1.1.1.5	OCTET STRING	read-only	Represents the name of current AP template configured for AP.
I32 h3cDot11APTrapUserCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.14	Integer32	accessible-for-notify	Represents the online user counter of AP.
NTF h3cDot11APTrapUserCntExceedThre	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.32			The notification will be sent when the online user counter exceeds the threshold.
I32 h3cDot11APTrapUserThreshold	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.15	Integer32	accessible-for-notify	Represents threshold of AP's online user counter.
C64 h3cDot11APTXPacketMCSRateCount	1.3.6.1.4.1.43.45.1.10.2.75.2.2.21.1.3	Counter64	read-only	Represents the count of packets transmission base on transmit data rate.
C64 h3cDot11APTXPacketRateCount	1.3.6.1.4.1.43.45.1.10.2.75.2.2.20.1.3	Counter64	read-only	Represents the count of packets transmission base on transmit data rate.
C64 h3cDot11APTXPacketSizeCount	1.3.6.1.4.1.43.45.1.10.2.75.2.2.19.1.3	Counter64	read-only	Represents the count of packets transmission base on frame size.
h3cDot11APTxStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1		not-accessible	Each entry of the table will provide the statistic data for each radio of a specific AP.
h3cDot11APTxStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2		not-accessible	The table will provide the transmission statistic for a specific radio of AP.
I32 h3cDot11APUserAuthCurNumber	1.3.6.1.4.1.43.45.1.10.2.75.2.2.24.1.1	Integer32	read-only	Represents the current number of user authenticated with this AP.
C32 h3cDot11APUserAuthFailCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.24.1.5	Counter32	read-only	Represents the total number of user authenticated failed with this AP.
C32 h3cDot11APUserAuthReqCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.24.1.3	Counter32	read-only	Represents the total number of user authenticate request with this AP.
h3cDot11APUserAuthStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.13.1		not-accessible	Each entry of the table will provide the user authentication statistic for this AP.
h3cDot11APUserAuthStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.13		not-accessible	The table will provide the user authentication statistic for this AP.
C32 h3cDot11APUserAuthSuccCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.24.1.4	Counter32	read-only	Represents the total number of user authenticated successed with this AP.
C32 h3cDot11APUserConnFailCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.24.1.2	Counter32	read-only	Represents the total number of user disconnected with this AP.
h3cDot11APUserInfoStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.25.1		not-accessible	Each entry of the table will provide the user information statistic of this AP.
h3cDot11APUserInfoStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.25		not-accessible	The table will provide the user information statistic of this AP.
IP h3cDot11APUserIpAddr	1.3.6.1.4.1.43.45.1.10.2.75.2.2.25.1.2	IpAddress	read-only	Represents the ip address of user logging in this AP.
OCT h3cDot11APUserLoginName	1.3.6.1.4.1.43.45.1.10.2.75.2.2.25.1.3	OCTET STRING	read-only	Represents the login name of user logging in this AP.
OCT h3cDot11APUserLoginTime	1.3.6.1.4.1.43.45.1.10.2.75.2.2.25.1.4	OCTET STRING	read-only	Represents the login time of user with this AP.
MAC h3cDot11APUserMacAddr	1.3.6.1.4.1.43.45.1.10.2.75.2.2.25.1.1	MacAddress	not-accessible	Represents the mac address of user logging in this AP.
TIK h3cDot11APUserOnlineTime	1.3.6.1.4.1.43.45.1.10.2.75.2.2.25.1.5	TimeTicks	read-only	Represents the online time of user with this AP.
h3cDot11APUserSecAuthStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.24.1		not-accessible	Each entry of the table will provide the user authentication statistic for this AP.
h3cDot11APUserSecAuthStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.24		not-accessible	The table will provide the user authentication statistic for this AP.
I32 h3cDot11AvgRxSignalStrength	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.19	Integer32	read-only	Represents the average received signal strength.
h3cDot11BSSAssocStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.6.1		not-accessible	Each entry of the table will provide the statistic data of station association for BSS.
h3cDot11BSSAssocStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.6		not-accessible	The table will provide the station association statistic for BSS.
MAC h3cDot11BSSID	1.3.6.1.4.1.43.45.1.10.2.75.2.1.4.1.2	MacAddress	read-only	As MAC Address format, it is to identify BSS.
C32 h3cDot11BSSRxAssociateFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.4.1.5	Counter32	read-only	Represents the number of associate frames reception with this BSS.
C32 h3cDot11BSSRxAuthenFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.4.1.10	Counter32	read-only	Represents the count of authentication frames received.
C32 h3cDot11BSSRxDataFrameBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.4.1.4	Counter32	read-only	Represents the bytes of data frames reception with this BSS.
C32 h3cDot11BSSRxDataFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.4.1.3	Counter32	read-only	Represents the number of data frames reception with this BSS.
C32 h3cDot11BSSRxFrameBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.4.1.2	Counter32	read-only	Represents the bytes of frames reception with this BSS.
C32 h3cDot11BSSRxFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.4.1.1	Counter32	read-only	Represents the number of frames reception with this BSS.
I32 h3cDot11BSSRxFrameErrorRatio	1.3.6.1.4.1.43.45.1.10.2.75.2.2.4.1.6	Integer32	read-only	Represents the ratio of error frames reception with this BSS.
I32 h3cDot11BSSRxNonUniFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.4.1.9	Integer32	read-only	Represents the count of non-unicast frames received.
C32 h3cDot11BSSRxPayloadBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.4.1.7	Counter32	read-only	Represents the payload bytes of data frames reception with this BSS.
h3cDot11BSSRxStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.4.1		not-accessible	Each entry of the table will provide the statistic data for each BSS on a specific radio.
h3cDot11BSSRxStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.4		not-accessible	The table will provide the reception statistic for a specific BSS on a radio.
C32 h3cDot11BSSRxUniFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.4.1.8	Counter32	read-only	Represents the count of unicast frames received.
C32 h3cDot11BSSStationAssocFailSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.6.1.2	Counter32	read-only	Represents the total number of station association failure with this BSS.
C32 h3cDot11BSSStationAssocRejectSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.6.1.4	Counter32	read-only	Represents the total number of station association rejected on account of resource limit with this BSS.
C32 h3cDot11BSSStationAssocReqSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.6.1.7	Counter32	read-only	Represents the total number of station association request with this BSS.
C32 h3cDot11BSSStationAssocSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.6.1.1	Counter32	read-only	Represents the total number of station association with this BSS.
I32 h3cDot11BSSStationCurAssocSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.6.1.6	Integer32	read-only	Represents the total number of current associated stations with this BSS.
I32 h3cDot11BSSStationCurAuthSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.6.1.8	Integer32	read-only	Represents the total number of current associated stations which have passed portal or 1x authentication with this BSS.
C32 h3cDot11BSSStationExDeAssocSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.6.1.5	Counter32	read-only	Represents the total number of exceptional station deauthentication (Without sending a deauthentication to AP) with this BSS.
C32 h3cDot11BSSStationReassocSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.6.1.3	Counter32	read-only	Represents the total number of station reassociation with this BSS.
C32 h3cDot11BSSTxAssociateFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.5.1.5	Counter32	read-only	Represents the number of associate frame transmission with this BSS.
C32 h3cDot11BSSTxAuthenFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.5.1.10	Counter32	read-only	Represents the count of authentication frames transmission with this BSS.
C32 h3cDot11BSSTxDataFrameBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.5.1.4	Counter32	read-only	Represents the bytes of data frame transmission with this BSS.
C32 h3cDot11BSSTxDataFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.5.1.3	Counter32	read-only	Represents the number of data frame transmission with this BSS.
C32 h3cDot11BSSTxFrameBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.5.1.2	Counter32	read-only	Represents the total number of bytes transmission with this BSS.
C32 h3cDot11BSSTxFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.5.1.1	Counter32	read-only	Represents the total number of frames transmission with this BSS.
I32 h3cDot11BSSTxNonUniFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.5.1.9	Integer32	read-only	Represents the number of non-unicast frames transmission with this BSS.
C32 h3cDot11BSSTxPayloadBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.5.1.6	Counter32	read-only	Represents the payload bytes of data frame transmission with this BSS.
C32 h3cDot11BSSTxRetryCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.5.1.7	Counter32	read-only	Represents the count of bytes retransmitted with this BSS.
h3cDot11BSSTxStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.5.1		not-accessible	Each entry of the table will provide the statistic data for each BSS on a specific radio.
h3cDot11BSSTxStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.5		not-accessible	The table will provide the transmission statistic for a specific BSS on a radio.
C32 h3cDot11BSSTxUniFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.5.1.8	Counter32	read-only	Represents the count of unicast frames transmission with this BSS.
H3C h3cDot11Channel	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.5	H3cDot11ChannelScopeType	read-only	Represents the current channel allocation for radio.
C32 h3cDot11ChannelSwitchTimesEx	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.14	Counter32	read-only	Represents the channel switch times.
H3C h3cDot11CurAPID	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.1	H3cDot11ObjectIDType	not-accessible	To uniquely identify a AP in running status.
I32 h3cDot11CurrACPortIndex	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.4	Integer32	read-only	Represents the port on the AC, by which the traffic of this AP comes through. NMS could refer it to access information kept in the MIB-2.
I32 h3cDot11CurrAPElementID	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.15	Integer32	read-only	Represents the AP element ID.
I32 h3cDot11CurrAPFlashSize	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.22	Integer32	read-only	Represents the size of AP flash.
I32 h3cDot11CurrAPFlashSizeInBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.23	Integer32	read-only	This object represents the size of AP flash.
OCT h3cDot11CurrAPImageName	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.10	OCTET STRING	read-only	Represents the image file name of AP.
IP h3cDot11CurrAPIPAddress	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.2	IpAddress	read-only	Represents the IP address of an AP.
IP h3cDot11CurrAPIPNetMask	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.12	IpAddress	read-only	Represents the IP netmask of AP.
OCT h3cDot11CurrAPIPv6Address	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.17	OCTET STRING	read-only	Represents the IPv6 address of AP.
MAC h3cDot11CurrAPMacAddress	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.3	MacAddress	read-only	Represents the MAC address of an AP.
H3C h3cDot11CurrAPMACMode	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.5	H3cDot11MACModeType	read-only	Represents what MAC mode defined in the CAPWAP is applied. For fat AP, the value will be fatap.
OCT h3cDot11CurrAPManufacturer	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.19	OCTET STRING	read-only	By the 'SMI Network Management Private Enterprise Codes' assigned by the IANA, NMS could know which vendor manufactures the AP.
I32 h3cDot11CurrAPMemorySize	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.20	Integer32	read-only	Represents the size of AP memory.
I32 h3cDot11CurrAPMemSizeInBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.21	Integer32	read-only	Represents the size of AP memory.
INT h3cDot11CurrAPMode	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.16	INTEGER	read-only	Represents the forward mode of the AP.
OCT h3cDot11CurrAPModelName	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.9	OCTET STRING	read-only	Represents index of WTP model,with it to get AP model information.
OCT h3cDot11CurrAPName	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.8	OCTET STRING	read-only	Represents the name of AP.
OCT h3cDot11CurrAPReleasedVersion	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.24	OCTET STRING	read-only	Represents the released version of AP.
OCT h3cDot11CurrAPSoftwareVersion	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.11	OCTET STRING	read-only	Represents the software version of AP.
I32 h3cDot11CurrAPSSIDNumber	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.18	Integer32	read-only	Represents the number of SSID configured on AP.
I32 h3cDot11CurrAPStationAssocCount	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.7	Integer32	read-only	Represents the total number of stations which are associating to AP.
OCT h3cDot11CurrAPTemplateName	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.6	OCTET STRING	read-only	Represents the name of current AP template.
I32 h3cDot11CurrIfNumber	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.14	Integer32	read-only	Represents number of interface of the AP.
I32 h3cDot11CurrInterfDetectedNum	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.9	Integer32	accessible-for-notify	Represents the number of interfere detected.
I32 h3cDot11CurrRadioModeSupport	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.13	Integer32	read-only	Represents which radio type supported by the AP. The WLAN system support the following possible radio type. dot11a(1), dot11b(2), dot11g(4), dot11n(8) For a AP,it could support multiple radio types at the same time.So the value of object could combine multiple value of radio type above. For example: For one AP which support both b and g mode radio, when getting the value from the node, the value is 6(2 + 4).
I32 h3cDot11CurrRadioModeSupport2	1.3.6.1.4.1.43.45.1.10.2.75.2.1.2.1.25	Integer32	read-only	Represents which radio type supported by the AP. The WLAN system support the following possible radio type. dot11a(1), dot11b(2), dot11g(4), dot11an(8), dot11gn(16) For a AP,it could support multiple radio types at the same time.So the value of object could combine multiple value of radio type above. For example: For one AP which support both b and g mode radio, when getting the value from the node, the value is 6(2 + 4).
I32 h3cDot11CurrSSIDResourceUseRatio	1.3.6.1.4.1.43.45.1.10.2.75.2.1.4.1.5	Integer32	read-only	Represents the ratio of resource usage of curr SSID
H3C h3cDot11CurrSvcPolicyID	1.3.6.1.4.1.43.45.1.10.2.75.2.1.4.1.3	H3cDot11ServicePolicyIDType	read-only	Represents the ID of each service policy used by the AP.
NTF h3cDot11DetcAdjChlIntfAP	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.36			This notification will be sent when some ambient AP interferes with adjacent channel.
NTF h3cDot11DetcAdjChlIntfAPClear	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.37			This notification will be sent when interference caused by ambient APs on the adjacent channel disappears.
NTF h3cDot11DFSFreeCntBelowThrRecov	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.27			This notification will be sent when available channels number recover enough level.
T/F h3cDot11DiversitySelectionRx	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.16	TruthValue	read-only	Represents the diversity selection received.
C64 h3cDot11DownByteNumber	1.3.6.1.4.1.43.45.1.10.2.75.2.2.27.1.5	Counter64	read-only	Represents the byte count of down link.
C32 h3cDot11DownLinkUpDownTimes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.7.1.2	Counter32	read-only	Represents up/down times of downlink interface of the AP.
C64 h3cDot11DownPacketNumber	1.3.6.1.4.1.43.45.1.10.2.75.2.2.27.1.4	Counter64	read-only	Represents the packet count of down link.
C32 h3cDot11FailedCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.2	Counter32	read-only	Represents the number of transmission failures.
I32 h3cDot11HighestRxSignalStrength	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.20	Integer32	read-only	Represents the highest received signal strength.
OCT h3cDot11InterfMacList	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.13	OCTET STRING	accessible-for-notify	Represents MAC address list of interfere detected.
I32 h3cDot11LowestRxSignalStrength	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.21	Integer32	read-only	Represents the lowest received signal strength.
H3C h3cDot11MACModeSupport	1.3.6.1.4.1.43.45.1.10.2.75.2.1.5.1.5	H3cDot11MACModeType	read-only	Represents the MAC mode type could be supported by a specific AP model.
I32 h3cDot11MaxBandwidth	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.9	Integer32	read-only	Represents the maximum bandwidth for the radio.
OCT h3cDot11MaxTxPwrLvl	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.17	OCTET STRING	read-only	Represents the maximum transmit power.
C32 h3cDot11MngFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.9.1.3	Counter32	read-only	Represents the total number of each type for management frame on this radio.
INT h3cDot11MngFrameType	1.3.6.1.4.1.43.45.1.10.2.75.2.2.9.1.2	INTEGER	not-accessible	Represents the type of the management frame on this radio.
C32 h3cDot11MngFrmCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.18.1.2	Counter32	read-only	Represents the total number of each type of management frame on this radio.
INT h3cDot11MngFrmType	1.3.6.1.4.1.43.45.1.10.2.75.2.2.18.1.1	INTEGER	not-accessible	Represents the type of the management frame on this radio.
C32 h3cDot11MultiRetryCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.4	Counter32	read-only	Represents the number of transmits that required more than one retry.
T/F h3cDot11OperStatus	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.4	TruthValue	read-only	Represents the operational status of radio.
NTF h3cDot11OtherDevIntClearTrap	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.20			This notification will be sent when previous ambient device disappeared with the same channel.
NTF h3cDot11OtherDevIntDetectedTrap	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.19			This notification will be sent when interference caused by ambient devices on the current channel disappears.
T/F h3cDot11PowerMgmtStatus	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.13	TruthValue	read-only	Represents status of power management of the radio.
I32 h3cDot11PwrAttRange	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.18	Integer32	read-only	Represents the range of power attenuation.
h3cDot11RadioAssocStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.8.1		not-accessible	Each entry of the table will provide the statistic data of station association for radio.
h3cDot11RadioAssocStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.8		not-accessible	The table will provide the station association statistic for radio.
H3C h3cDot11RadioID	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.2	H3cDot11RadioScopeType	accessible-for-notify	Represents each radio.
TIK h3cDot11RadioIfLastChange	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.23	TimeTicks	read-only	Represents time at last change that occurred on radio interface.
C32 h3cDot11RadioIfUpdownTimes	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.22	Counter32	read-only	Represents the up/down times on radio interface.
h3cDot11RadioMngFrameStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.9.1		not-accessible	Each entry of the table will provide the management frame statistic for this radio.
h3cDot11RadioMngFrameStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.9		not-accessible	The table will provide the management frame statistic for this radio.
h3cDot11RadioMngFrmStatisEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.18.1		not-accessible	Each entry of the table will provide the management frame statistic of this radio.
h3cDot11RadioMngFrmStatisTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.18		not-accessible	The table will provide the management frame statistic of this radio.
U32 h3cDot11RadioModeSupport	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.11	Unsigned32	read-only	Represents radio type supported by the radio. The WLAN system supports the following possible radio type: dot11a(1), dot11b(2), dot11g(4), dot11gn(16), dot11an(32). For the radio, it could support multiple radio types at the same time. So the value of this object could combine multiple values of radio type above. For example: For one radio which supports both dot11b and dot11g mode, when get value from the object, the value is 5(1 + 4).
U32 h3cDot11RadioModeSupport2	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.24	Unsigned32	read-only	Represents radio type supported by the radio. The WLAN system supports the following possible radio type: dot11a(1), dot11b(2), dot11g(4), dot11an(8), dot11gn(16). For the radio, it could support multiple radio types at the same time. So the value of this object could combine multiple values of radio type above. For example: For one radio which supports both dot11b and dot11g mode, when get value from the object, the value is 5(1 + 4).
H3C h3cDot11RadioNumSupport	1.3.6.1.4.1.43.45.1.10.2.75.2.1.5.1.3	H3cDot11RadioScopeType	read-only	Represents how many radios the specific AP model could support.
I32 h3cDot11RadioRxAverSnr	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.24	Integer32	read-only	Represents the average signal noise rate of this radio.
C32 h3cDot11RadioStaAssocFailSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.8.1.2	Counter32	read-only	Represents the total number of station association failure with this radio.
C32 h3cDot11RadioStaAssocRejectSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.8.1.4	Counter32	read-only	Represents the total number of station association rejected on account of resource limit with this radio.
C32 h3cDot11RadioStaAssocSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.8.1.1	Counter32	read-only	Represents the total number of station association with this radio.
I32 h3cDot11RadioStaCurAssocSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.8.1.6	Integer32	read-only	Represents the total number of current associated stations with this radio.
C32 h3cDot11RadioStaExDeAssocSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.8.1.5	Counter32	read-only	Represents the total number of exceptional station de-authentication (Without sending a de-authentication to AP) with this radio.
C32 h3cDot11RadioStaReassocSum	1.3.6.1.4.1.43.45.1.10.2.75.2.2.8.1.3	Counter32	read-only	Represents the total number of station re-association with this radio.
H3C h3cDot11RadioStatisIndex	1.3.6.1.4.1.43.45.1.10.2.75.2.2.9.1.1	H3cDot11RadioElementIndex	not-accessible	Represents index of radio.
I32 h3cDot11ResourceUseRatio	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.10	Integer32	read-only	Represents the ratio of radio resource usage.
C32 h3cDot11RetryCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.3	Counter32	read-only	Represents the number of transmit retries.
C32 h3cDot11RetryMSDUCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.25	Counter32	read-only	Represents the number of retransfer MSDU.
C32 h3cDot11RtsFailCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.6	Counter32	read-only	Represents the number of RTS transmission failures.
C32 h3cDot11RtsSuccessCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.5	Counter32	read-only	Represents the number of successful RTS (Request to send) transmission.
C32 h3cDot11RxAssociateFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.19	Counter32	read-only	Represents the number of associate frame reception.
C32 h3cDot11RxAuthenFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.18	Counter32	read-only	Represents the number of authentication frame reception.
C32 h3cDot11RxBcastFrameBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.11	Counter32	read-only	Represents the bytes of broadcast frames reception.
C32 h3cDot11RxBcastFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.4	Counter32	read-only	Represents the number of broadcast frames reception.
C32 h3cDot11RxCtrlFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.15	Counter32	read-only	Represents the number of control frames reception.
C32 h3cDot11RxDataFrameBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.23	Counter32	read-only	Represents the bytes of data frames reception.
C32 h3cDot11RxDataFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.16	Counter32	read-only	Represents the number of data frames reception.
C32 h3cDot11RxDecryptErrorCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.17	Counter32	read-only	Represents the number of decryption error.
C32 h3cDot11RxDiscardFrameBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.13	Counter32	read-only	Represents the bytes of frames discarded by AP.
C32 h3cDot11RxDiscardFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.6	Counter32	read-only	Represents the number of frames discarded by AP.
C32 h3cDot11RxFcsErrCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.8	Counter32	read-only	Represents the number of FCS error frames reception.
C32 h3cDot11RxFragCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.7	Counter32	read-only	Represents the number of frame fragments reception.
C32 h3cDot11RxFrameBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.9	Counter32	read-only	Represents the bytes of frames reception.
C32 h3cDot11RxFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.2	Counter32	read-only	Represents the number of frames reception.
C32 h3cDot11RxFrameDupCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.1	Counter32	read-only	Represents the number of duplicate frames reception.
I32 h3cDot11RxFrameErrorRatio	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.20	Integer32	read-only	Represents the ratio of error frame.
C32 h3cDot11RxMcastFrameBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.12	Counter32	read-only	Represents the bytes of multicast frames reception.
C32 h3cDot11RxMcastFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.5	Counter32	read-only	Represents the number of multicast frames reception.
C32 h3cDot11RxMgmtFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.14	Counter32	read-only	Represents the number of management frames reception.
C32 h3cDot11RxMICErrorCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.22	Counter32	read-only	Represents the number of MIC verification error.
C64 h3cDot11RxNUcastDataFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.28	Counter64	read-only	Represents the number of non-unicast data frames reception.
C32 h3cDot11RxPayloadBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.25	Counter32	read-only	Represents the payload bytes of data frames reception.
C32 h3cDot11RxPhyErrorCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.21	Counter32	read-only	Represents the number of physical reception error.
C64 h3cDot11RxTotalDiscardFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.29	Counter64	read-only	Represents the number of total frames discarded by radio.
C64 h3cDot11RxTotalIPCheckErrPacketCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.30	Counter64	read-only	Represents the total number of IP checksum error packets received through the current radio.
I32 h3cDot11RxTrafficSpeed	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.26	Integer32	read-only	Represents the bytes of frames reception per second.
C64 h3cDot11RxUcastDataFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.27	Counter64	read-only	Represents the number of unicast data frames reception.
C32 h3cDot11RxUcastFrameBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.10	Counter32	read-only	Represents the bytes of unicast frames reception.
C32 h3cDot11RxUcastFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.1.1.3	Counter32	read-only	Represents the number of unicast frames reception.
OCT h3cDot11SSID	1.3.6.1.4.1.43.45.1.10.2.75.2.1.4.1.4	OCTET STRING	read-only	This object represents the SSID corresponding to this BSS.
OCT h3cDot11SSIDIndex	1.3.6.1.4.1.43.45.1.10.2.75.2.2.27.1.1	OCTET STRING	not-accessible	Represents the SSID.
INT h3cDot11StaFullReason	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.10	INTEGER	accessible-for-notify	Reports which kind maximum number of STA is reached. New STA is not able to associate.
NTF h3cDot11StaInterfClearTrap	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.18			This notification will be sent when interference caused by ambient devices on the current channel happens.
NTF h3cDot11StaInterfDetectedTrap	1.3.6.1.4.1.43.45.1.10.2.75.2.3.0.17			This notification will be sent when interference caused by ambient STAs on the current channel disappears.
I32 h3cDot11StaLimitNumber	1.3.6.1.4.1.43.45.1.10.2.75.2.3.1.11	Integer32	accessible-for-notify	Represents the limit number of STA.
I32 h3cDot11StationNumSupport	1.3.6.1.4.1.43.45.1.10.2.75.2.1.5.1.4	Integer32	read-only	Represents how many station could be supported by a specific AP model.
h3cDot11TrafficEntry	1.3.6.1.4.1.43.45.1.10.2.75.2.2.27.1		not-accessible	Each entry contains the traffc information of a ssid.
h3cDot11TrafficTable	1.3.6.1.4.1.43.45.1.10.2.75.2.2.27		not-accessible	The table describes user's traffic based on ssid
C32 h3cDot11TxAssociateFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.19	Counter32	read-only	Represents the number of associate frame transmission.
C32 h3cDot11TxAuthenFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.18	Counter32	read-only	Represents the number of authentication frame transmission.
C32 h3cDot11TxBcastFrameBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.15	Counter32	read-only	Represents the bytes of broadcast frames transmission.
C32 h3cDot11TxBcastFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.10	Counter32	read-only	Represents the number of broadcast frames transmission.
C32 h3cDot11TxCtrlFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.31	Counter32	read-only	Represents the number of transmission control frames.
C32 h3cDot11TxDataFrameBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.22	Counter32	read-only	Represents the bytes of data frame transmission.
C32 h3cDot11TxDataFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.21	Counter32	read-only	Represents the number of data frame transmission.
C32 h3cDot11TxDiscardFrameBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.17	Counter32	read-only	Represents the bytes of multicast frames transmission.
C32 h3cDot11TxDiscardFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.12	Counter32	read-only	Represents the number of frames discarded by AP.
C32 h3cDot11TxDiscardMSDUCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.24	Counter32	read-only	Represents the number of discarded MSDU transmission.
C32 h3cDot11TxErrFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.33	Counter32	read-only	Represents the count of error frame.
I32 h3cDot11TxErrFrameRatio	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.28	Integer32	read-only	Represents the ratio of error frame.
C32 h3cDot11TxFragCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.1	Counter32	read-only	Represents the number of fragmented frames transmission.
C32 h3cDot11TxFrameBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.13	Counter32	read-only	Represents the total bytes of frames transmission.
C32 h3cDot11TxFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.8	Counter32	read-only	Represents the total number of frames transmission.
I32 h3cDot11TxFrameRate	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.29	Integer32	read-only	Represents the count of frames transmission per second.
I32 h3cDot11TxFrameRetryRatio	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.20	Integer32	read-only	Represents the ratio of retry frame.
C32 h3cDot11TxMACErrCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.32	Counter32	read-only	Represents the count of MAC error frame.
C32 h3cDot11TxMcastFrameBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.16	Counter32	read-only	Represents the bytes of multicast frames transmission.
C32 h3cDot11TxMcastFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.11	Counter32	read-only	Represents the number of multicast frames transmission.
C32 h3cDot11TxMgtFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.30	Counter32	read-only	Represents the number of transmitted management frames.
C32 h3cDot11TxMSDUCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.23	Counter32	read-only	Represents the total number of MSDU transmission.
C64 h3cDot11TxNUcastDataFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.35	Counter64	read-only	Represents the number of non-unicast data frames transmission.
C32 h3cDot11TxPayloadBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.26	Counter32	read-only	Represents the payload bytes of data frames transmission.
H3C h3cDot11TxPowerLevel	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.6	H3cDot11TxPwrLevelScopeType	read-only	Represents the current transmit power level for radio.
INT h3cDot11TxPowerLevel2	1.3.6.1.4.1.43.45.1.10.2.75.2.1.3.1.12	INTEGER	read-only	The TxPowerLevel N currently being used to transmit data.
I32 h3cDot11TxTrafficSpeed	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.27	Integer32	read-only	Represents the bytes of frames transmission per second.
C64 h3cDot11TxUcastDataFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.34	Counter64	read-only	Represents the number of unicast data frames transmission.
C32 h3cDot11TxUcastFrameBytes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.14	Counter32	read-only	Represents the bytes of unicast frames transmission.
C32 h3cDot11TxUcastFrameCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.2.1.9	Counter32	read-only	Represents the number of unicast frames transmission.
C64 h3cDot11UpByteNumber	1.3.6.1.4.1.43.45.1.10.2.75.2.2.27.1.3	Counter64	read-only	Represents the byte count of up link.
C32 h3cDot11UpLinkUpDownTimes	1.3.6.1.4.1.43.45.1.10.2.75.2.2.7.1.1	Counter32	read-only	Represents up/down times of uplink interface of the AP.
C64 h3cDot11UpPacketNumber	1.3.6.1.4.1.43.45.1.10.2.75.2.2.27.1.2	Counter64	read-only	Represents the packet count of up link.
C32 h3cDot11UserAuthStatisCnt	1.3.6.1.4.1.43.45.1.10.2.75.2.2.13.1.2	Counter32	read-only	Represents the total number of each type for user authentication with this AP.
INT h3cDot11UserAuthStatisType	1.3.6.1.4.1.43.45.1.10.2.75.2.2.13.1.1	INTEGER	not-accessible	Represents the type of user authentication with this AP.
I32 h3cDot11WlanID	1.3.6.1.4.1.43.45.1.10.2.75.2.1.4.1.1	Integer32	not-accessible	Represents ID of a specific ESS.

RFC description

Manages 802.11 Access Point discovery, registration, and operational status on H3C wireless controllers.

Start monitoring H3C wireless controllers and APs with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download A3COM-HUAWEI-DOT11-APMT-MIB