All MIBs › ENGENIUS-PRIVATE-MIB › staWDS
staWDS
Module: ENGENIUS-PRIVATE-MIB
OID (symbolic): ENGENIUS-PRIVATE-MIB::staWDS
OID (numeric): 1.3.6.1.4.1.14125.2.2.14.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enable / Disable WDS link in Client Mode
What is staWDS?
Toggles 4-address WDS framing when the device operates in client/bridge mode, enabled by default. Enabling it preserves the original source and destination MAC addresses of frames as they cross the wireless bridge, which is necessary for the bridge to behave transparently to devices on either side.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.14125.2.2.14.1 snmpwalk -v2c -c public <target> ENGENIUS-PRIVATE-MIB::staWDS
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.14125.2.2.14.1.1 snmpget -v2c -c public <target> ENGENIUS-PRIVATE-MIB::staWDS.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.14125.2.2.14.1.1 i <value>
Start monitoring EnGenius (Senao) 802.11 wireless access point or router with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENGENIUS-PRIVATE-MIB::staWDS OID value, configure state conditions and alerts, and monitor any EnGenius (Senao) 802.11 wireless access point or router from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.14125 | engenius | ENGENIUS-CLIENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.14125.2 | engeniusprivate | ENGENIUS-PRIVATE-MIB |
| 1.3.6.1.4.1.14125.2.2 | configuration | ENGENIUS-PRIVATE-MIB |
| 1.3.6.1.4.1.14125.2.2.14 | wlanstawds | ENGENIUS-PRIVATE-MIB |
| 1.3.6.1.4.1.14125.2.2.14.1 | staWDS | ENGENIUS-PRIVATE-MIB |