EXTREME-SUMMIT-WM-BRANCH-OFFICE-MIB

All MIBs › EXTREME-SUMMIT-WM-BRANCH-OFFICE-MIB

Organization: Extreme Networks, Inc.

Last Updated: 2005-09-01

Category: Domain: Wireless, Technology: Wireless, Vendor: Extreme Networks

Description: Extreme Networks Summit WM MIB for branch office wireless controller settings and remote AP provisioning.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is EXTREME-SUMMIT-WM-BRANCH-OFFICE-MIB?

EXTREME-SUMMIT-WM-BRANCH-OFFICE-MIB is an Extreme Networks proprietary MIB configuring Branch Office mode on the Summit WM wireless LAN controller platform, a feature letting a remote-office AP continue limited operation if it loses contact with its central controller. Its table configures connection mode, IP allocation method (static or dynamic), static IP/netmask/gateway values, and whether the device reboots automatically after repeated poll failures, alongside a related WM-specific table. As a configuration MIB it lets an administrator confirm a branch office AP's failover IP configuration and reboot-on-failure policy are set correctly. It is deployed on Extreme Networks Summit WM wireless LAN controllers with branch-office APs. Engineers can download the EXTREME-SUMMIT-WM-BRANCH-OFFICE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in EXTREME-SUMMIT-WM-BRANCH-OFFICE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Extreme Networks Summit WM wireless LAN controller platform (Branch Office APs)

Monitoring Examples

An administrator checks boIpAllocation and the static IP fields for a branch-office AP to confirm it will retain a usable management address if it loses contact with its central Summit WM controller.

What Can Be Monitored

branch-office connect mode and IP allocation configuration

Imported Objects

From EXTREME-SUMMIT-WM-MIB

altitudeIndex

OBJECT-TYPE

From EXTREME-SUMMIT-WM-SMI

summitWMMgmt	OBJECT-IDENTITY
summitWMModules	OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
summitWMBranchOfficeMIB	1.3.6.1.4.1.1916.5.3.22
branchOfficeObjects	1.3.6.1.4.1.1916.5.3.22.1
branchOfficeTable	1.3.6.1.4.1.1916.5.3.22.1.1		not-accessible	Table of branch office configuration values for the access points.
branchOfficeEntry	1.3.6.1.4.1.1916.5.3.22.1.1.1		not-accessible	Branch office configuration values for a specific access point.
INT boConnectMode	1.3.6.1.4.1.1916.5.3.22.1.1.1.1	INTEGER	read-write	Access point connection mode - use a static definition or service discovery.
INT boIpAllocation	1.3.6.1.4.1.1916.5.3.22.1.1.1.2	INTEGER	read-write	Indicates if access point is to use DHCP to acquire an IP address or has a statically configured IP address.
IP boStaticIpAddress	1.3.6.1.4.1.1916.5.3.22.1.1.1.3	IpAddress	read-write	If access point is statically configured, contains the IP addres.
IP boStaticNetmask	1.3.6.1.4.1.1916.5.3.22.1.1.1.4	IpAddress	read-write	Netmask for the access point if statically configured.
IP boStaticGateway	1.3.6.1.4.1.1916.5.3.22.1.1.1.5	IpAddress	read-write	Default gateway for the access point if statically configured.
I32 boRebootOnPollFailure	1.3.6.1.4.1.1916.5.3.22.1.1.1.6	Integer32	read-write	Indicates if access point should reboot on a poll failure (disabling wireless access) or continue to provide limited local wireless service.
branchOfficeWMTable	1.3.6.1.4.1.1916.5.3.22.1.2		not-accessible	Contains the list of access controller IP addressIf an access point has a static.
branchOfficeWMEntry	1.3.6.1.4.1.1916.5.3.22.1.2.1		not-accessible	The access controller search list for an access point.
I32 boWMConnectOrder	1.3.6.1.4.1.1916.5.3.22.1.2.1.1	Integer32	read-write	The position of the access controller in the search list.
IP boWMIpAddress	1.3.6.1.4.1.1916.5.3.22.1.2.1.2	IpAddress	read-write	IP address of the access controller.
ROW boWMRowStatus	1.3.6.1.4.1.1916.5.3.22.1.2.1.3	RowStatus	read-write	RowStatus attribute to control modification of branchOfficeWMTable.
summitWMBranchOfficeConformance	1.3.6.1.4.1.1916.5.3.22.2
summitWMBranchOfficeGroup	1.3.6.1.4.1.1916.5.3.22.2.1			Conformance group definitions for the branch office MIB.
summitWMBOConformance	1.3.6.1.4.1.1916.5.3.22.2.2			Compliance group definitions for the branch office MIB.

RFC description

Branch office configuration MIB for Extreme Summit WM wireless management, managing access point connectivity and IP allocation.

Start monitoring Extreme Networks Summit WM wireless LAN controller (Branch Office APs) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download EXTREME-SUMMIT-WM-BRANCH-OFFICE-MIB

What Is EXTREME-SUMMIT-WM-BRANCH-OFFICE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description