ELTEX-MES-COPY-MIB

All MIBs › ELTEX-MES-COPY-MIB

Category: Vendor: Eltex

Description: Eltex MES copy MIB for managing file copy operations including firmware upgrades and configuration file transfers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ELTEX-MES-COPY-MIB?

ELTEX-MES-COPY-MIB is a small vendor-specific MIB from Eltex that extends the ELTEX-MES enterprise tree (importing eltMesCopy FROM ELTEX-MES) and depends on RlCopyLocationType from RADLAN-COPY-MIB as well as InetAddress types from INET-ADDRESS-MIB, reflecting the RADLAN-derived switch software underlying Eltex MES switches. It is not an IETF standard but a purpose-built module for configuration backup, exposing scalar controls such as eltCopyAutoBackupEnable, eltCopyAutoBackupTimeout, eltCopyAutoBackupFilePath, eltCopyAutoBackupServerAddress, and eltCopyAutoBackupOnWrite alongside a manual-trigger object eltCopyUserBackupStart. It also maintains eltCopyBackupHistoryTable, a row-status-controlled log of each backup attempt's date/time, destination location, server address, file path, and status, plus eltCopyBackupHistoryAction to clear that history. This makes it useful for confirming that automatic running-config backups to a remote server actually occurred, and administrators can download the ELTEX-MES-COPY-MIB file to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ELTEX-MES-COPY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Eltex MES switches

Monitoring Examples

An operator polls eltCopyBackupHistoryTable (eltCopyBackupHistoryDateTime and eltCopyBackupHistoryStatus) after eltCopyAutoBackupOnWrite fires on a configuration write, and the absence of a new row or a failed eltCopyBackupHistoryStatus for the destination named in eltCopyAutoBackupServerAddress would indicate the automatic backup to the remote server is not completing.

What Can Be Monitored

eltCopyAutoBackupEnable / eltCopyAutoBackupOnWrite (automatic backup trigger configuration)
eltCopyAutoBackupTimeout (backup interval in minutes)
eltCopyBackupHistoryTable (backup attempt history: timestamp, destination, status)
eltCopyUserBackupStart (manual backup start/stop status)
eltCopyBackupHistoryAction (history table clear control)

Imported Objects

From ELTEX-MES

eltMesCopy

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From RADLAN-COPY-MIB

RlCopyLocationType

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
T/F eltCopyAutoBackupEnable	1.3.6.1.4.1.35265.1.23.3.1	TruthValue	read-write	Enabling on automatic backup configuration.
U32 eltCopyAutoBackupTimeout	1.3.6.1.4.1.35265.1.23.3.2	Unsigned32	read-write	This MIB should be used in order to change the time-interval of automatic copy of running-config to external server. The value should be the number of minutes for the interval of time from the backup.
STR eltCopyAutoBackupFilePath	1.3.6.1.4.1.35265.1.23.3.3	DisplayString	read-write	The name of the destination file.
STR eltCopyAutoBackupServerAddress	1.3.6.1.4.1.35265.1.23.3.4	DisplayString	read-write	The Inet address of the destination remote host
T/F eltCopyAutoBackupOnWrite	1.3.6.1.4.1.35265.1.23.3.5	TruthValue	read-write	Performing automatic backups every time you write configuration in memory.
ELT eltCopyUserBackupStart	1.3.6.1.4.1.35265.1.23.3.6	EltCopyUserBackupStatus	read-write	Starting backup manually.
T/F eltCopyBackupHistoryEnable	1.3.6.1.4.1.35265.1.23.3.7	TruthValue	read-write	Performing automatic backups every time you write configuration in memory.
eltCopyBackupHistoryTable	1.3.6.1.4.1.35265.1.23.3.8		not-accessible	A DHCP interface configuration table.
eltCopyBackupHistoryEntry	1.3.6.1.4.1.35265.1.23.3.8.1		not-accessible	A DHCP interface configuration entry.
INT eltCopyBackupHistoryIndex	1.3.6.1.4.1.35265.1.23.3.8.1.1	INTEGER	not-accessible	An arbitrary incremental index for the profiles table. Zero for next free index.
STR eltCopyBackupHistoryDateTime	1.3.6.1.4.1.35265.1.23.3.8.1.2	DisplayString	read-write	Name of profile.
RLC eltCopyBackupHistoryDstLocation	1.3.6.1.4.1.35265.1.23.3.8.1.3	RlCopyLocationType	read-write	Destination File Location
STR eltCopyBackupHistoryServerAddr	1.3.6.1.4.1.35265.1.23.3.8.1.4	DisplayString	read-write	Name of profile.
STR eltCopyBackupHistoryFilePath	1.3.6.1.4.1.35265.1.23.3.8.1.5	DisplayString	read-write	Name of profile.
ROW eltCopyBackupHistoryStatus	1.3.6.1.4.1.35265.1.23.3.8.1.6	RowStatus	read-write	The status of a table entry. Only three statuses are aceptable: CreateAndGo to create, Active to update,Destroy to delete. All other values cause error.
INT eltCopyBackupHistoryAction	1.3.6.1.4.1.35265.1.23.3.9	INTEGER	read-write	Used to clear backup Table.

RFC description

Manages automatic and manual backup of device configuration to remote servers for Eltex MES switches.

Start monitoring Eltex MES-series Ethernet switch (automatic config backup) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ELTEX-MES-COPY-MIB

What Is ELTEX-MES-COPY-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description