All MIBs › ELTEX-MES-IP-BFD-MIB
Organization: Eltex Enterprise Co, Ltd.
Last Updated: 2014-03-28
Category: Vendor: Eltex
Description: Eltex MES BFD (Bidirectional Forwarding Detection) MIB for managing BFD sessions and failure detection timers.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ELTEX-MES-IP-BFD-MIB?
ELTEX-MES-IP-BFD-MIB is a vendor-specific Eltex private MIB intended to manage Bidirectional Forwarding Detection (BFD) sessions on Eltex MES-series switches/routers, used for rapid failure detection between adjacent routing/forwarding peers. Such a module would typically expose BFD session tables covering session state, detection multiplier, and transmit/receive interval timers, tied to the routing protocols (OSPF, BGP, static routes) that depend on BFD for fast convergence. It is directly relevant to hardware/software status monitoring since a BFD session's up/down state is often the fastest available indicator of a link or peer failure, allowing routing software to react in sub-second time. The extracted source data for this module contains only boilerplate description text and no object/table names, so this summary reflects the module's stated purpose rather than concrete definitions found in the source. BFD MIBs of this kind are typically deployed on routers/L3 switches running OSPF or BGP where fast failover is required. Engineers can download the ELTEX-MES-IP-BFD-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ELTEX-MES-IP-BFD-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Eltex MES-series router/L3 switch
Monitoring Examples
No object or table names were extracted from the source for this module, so a concrete polling example cannot be grounded to real identifiers from ELTEX-MES-IP-BFD-MIB itself; in general, a BFD MIB of this kind would be polled for per-session state (up/down), local/remote discriminators, and negotiated detection timers, with a session transitioning to down signaling a fast-detected link or peer failure protecting an OSPF or BGP adjacency running over the same path.
What Can Be Monitored
- BFD session state (up/down)
- BFD detection timer configuration
- BFD session peer association
Imported Objects
From ELTEX-MES
| eltMes | MODULE-IDENTITY |
From SNMPv2-SMI
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus | |
| TruthValue |
OIDs
RFC description
Configures Bidirectional Forwarding Detection for IP interfaces on Eltex switches.
Start monitoring Eltex MES-series router/L3 switch (BFD session detection) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.