All MIBs › EICON-MIB-CARD › cardAdminStateCtr
cardAdminStateCtr
Module: EICON-MIB-CARD
OID (symbolic): EICON-MIB-CARD::cardAdminStateCtr
OID (numeric): 1.3.6.1.4.1.434.2.2.2.2.1.5
Node type: OBJECT-TYPE
Type: CardAdminState
Access: read-write
Description: The administrative state of the EiconCard. Management station can modify the value of that parameter in order to perform a specific action on the EiconCard. Value 'start' is used to start the EiconCard, value 'stop' is used to stop the EiconCard. Value 'dump' is used to dump the EiconCard and value 'test' is used to test the EiconCard hardware. Before the EiconCard is started, the Agent will read the name of the configuration file directory to be used from the srvDomainConfigDir. Agent will respond to that request immediately and start the action. The Management station will poll the cardActionState variable to find out the results of the action and the cardActionError variable to find the error code in the case of the action failure. If the action produces an output file, then the mib variable cardActionOutputFile has to be initialized by the Management station.
What is cardAdminStateCtr?
Read-write control an admin sets to start, stop, dump, or test a specific EiconCard; per the description, before issuing 'start' the agent reads the config directory from srvDomainConfigDir, and after any action the admin should poll cardActionState for the outcome and cardActionError for the failure code if it didn't succeed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.434.2.2.2.2.1.5 snmpwalk -v2c -c public <target> EICON-MIB-CARD::cardAdminStateCtr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.434.2.2.2.2.1.5.1 snmpget -v2c -c public <target> EICON-MIB-CARD::cardAdminStateCtr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.434.2.2.2.2.1.5.1 s <value>
Start monitoring Eicon Technology WAN communications equipment (WAN adapter card inventory/status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EICON-MIB-CARD::cardAdminStateCtr OID value, configure state conditions and alerts, and monitor any Eicon Technology WAN communications equipment (WAN adapter card inventory/status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.434 | eicon | ECLAPBEXT-MIB |
| 1.3.6.1.4.1.434.2 | management | ECLAPBEXT-MIB |
| 1.3.6.1.4.1.434.2.2 | mibv2 | ECLAPBEXT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.434.2.2.2 | card | EICON-MIB-CARD |
| 1.3.6.1.4.1.434.2.2.2.2 | cardTable | EICON-MIB-CARD |
| 1.3.6.1.4.1.434.2.2.2.2.1 | cardEntry | EICON-MIB-CARD |
| 1.3.6.1.4.1.434.2.2.2.2.1.5 | cardAdminStateCtr | EICON-MIB-CARD |