| OID symbolic | OID numeric | Type | Access | Description |
|---|
| snmpSyslogDeviceMIB | 1.3.6.1.4.1.9.6.1.101.82.1 | | | This MIB module defines a portion of the SNMP enterprise
MIBs pertaining to the configuration and generation of
Syslog compatible diagnostic messages. |
| snmpSyslogDevice | 1.3.6.1.4.1.9.6.1.101.82.1.1 | | | |
| C32 snmpSyslogDeviceMessagesEx | 1.3.6.1.4.1.9.6.1.101.82.1.1.1 | Counter32 | read-only | The number of messages successfully delivered to
the upstream side of the syslog device software
for processing. |
| C32 snmpSyslogDeviceMessagesDropped | 1.3.6.1.4.1.9.6.1.101.82.1.1.2 | Counter32 | read-only | The number of messages unable to be queued to
the downstream side of the syslog device software
for transmitting. |
| TIM snmpSyslogDeviceLastMessageTime | 1.3.6.1.4.1.9.6.1.101.82.1.1.3 | TimeStamp | read-only | The sysUpTime of the last attempt, successful or
otherwise, to queue a message to the downstream
side of the syslog device software. |
| BIT snmpSyslogDeviceControl | 1.3.6.1.4.1.9.6.1.101.82.1.1.4 | Bits | read-write | A list of attributes to control the operation of the
syslog device. |
| snmpSyslogCollector | 1.3.6.1.4.1.9.6.1.101.82.1.2 | | | |
| U32 snmpSyslogCollectorMaxEntries | 1.3.6.1.4.1.9.6.1.101.82.1.2.1 | Unsigned32 | read-only | The maximum number of entries allowed in the
snmpSyslogCollectorTable. |
| G32 snmpSyslogCollectorNumEntries | 1.3.6.1.4.1.9.6.1.101.82.1.2.2 | Gauge32 | read-only | The number of entries currently in the
snmpSyslogCollectorTable. |
| U32 snmpSyslogCollectorTableNextAvailableIndex | 1.3.6.1.4.1.9.6.1.101.82.1.2.3 | Unsigned32 | read-only | This object indicates the numerically lowest available
index within this entity, which may be used for the
value of snmpSyslogCollectorIndex in the creation of a
new entry in the snmpSyslogCollectorTable.
An index is considered available if the index value
falls within the range of 1 to 8 and is not being used
to index an existing entry in the snmpSyslogCollectorTable
contained within this entity.
A value of zero indicates that all of the entries in the
snmpSyslogCollectorTable are currently in use.
This value SHOULD only be considered a guideline for
management creation of snmpSyslogCollectorEntries, there
is no requirement on management to create entries based
upon this index value. |
| snmpSyslogCollectorTable | 1.3.6.1.4.1.9.6.1.101.82.1.2.4 | | not-accessible | A table containing Syslog collector information. |
| snmpSyslogCollectorEntry | 1.3.6.1.4.1.9.6.1.101.82.1.2.4.1 | | not-accessible | Defines the information to generate syslog messages to
an aggregating agent or collector.
Entries within this table with an access level of read-
create MUST be considered non-volatile and MUST be
maintained across entity resets. |
| U32 snmpSyslogCollectorIndex | 1.3.6.1.4.1.9.6.1.101.82.1.2.4.1.1 | Unsigned32 | not-accessible | A unique arbitrary identifier for this syslog collector. |
| STR snmpSyslogCollectorDescription | 1.3.6.1.4.1.9.6.1.101.82.1.2.4.1.2 | SnmpAdminString | read-create | Administratively assigned textual description of this
syslog collector. |
| IPt snmpSyslogCollectorAddressType | 1.3.6.1.4.1.9.6.1.101.82.1.2.4.1.3 | InetAddressType | read-create | The type of Internet address by which the Syslog
collector is specified in snmpSyslogCollectorAddress.
Not all address types may be supported. |
| IP snmpSyslogCollectorAddress | 1.3.6.1.4.1.9.6.1.101.82.1.2.4.1.4 | InetAddress | read-create | The Internet address for the Syslog message collector.
The use of DNS domain names is discouraged, and agent
support for them is optional. Deciding when, and how
often, to resolve them is an issue. Not resolving them
often enough means you might lose synchronization with
the associated entry in the DNS server, and resolving
them too often might leave you without access to the
Syslog collector during critical network events. |
| SYS snmpSyslogCollectorUdpPort | 1.3.6.1.4.1.9.6.1.101.82.1.2.4.1.5 | SyslogUdpPort | read-create | The UDP port number the syslog device is using to send
requests to this syslog collector.
If an entity only supports sending messages using a
single UDP port to all collectors then this may optionally
be implemented read-only, in which case the current
value of snmpSyslogCollectorDefaultUdpPort will be used. |
| SYS snmpSyslogCollectorFacility | 1.3.6.1.4.1.9.6.1.101.82.1.2.4.1.6 | SyslogFacility | read-create | The syslog facility (local0-local7) that will be encoded
in messages sent to this collector.
If an entity only supports encoding a single facility in
all messages to all collectors then this may optionally be
implemented read-only, in which case the current value of
snmpSyslogCollectorDefaultFacility will be used. |
| SYS snmpSyslogCollectorSeverity | 1.3.6.1.4.1.9.6.1.101.82.1.2.4.1.7 | SyslogSeverity | read-create | The maximum severity level of the messages that SHOULD
be forwarded to the syslog collector. The higher the level,
the lower the severity.
If an entity only supports filtering based on a single
severity level for all collectors then this may optionally
be implemented read-only, in which case the current value
of snmpSyslogCollectorDefaultSeverity will be used. |
| C32 snmpSyslogCollectorMessagesIgnored | 1.3.6.1.4.1.9.6.1.101.82.1.2.4.1.8 | Counter32 | read-only | This is a count of messages not sent to this collector
because the severity level of the message was above
snmpSyslogCollectorSeverity, the higher the level,
the lower the severity. |
| ROW snmpSyslogCollectorRowStatus | 1.3.6.1.4.1.9.6.1.101.82.1.2.4.1.9 | RowStatus | read-create | This object allows for the dynamic creation and deletion
of entries within the snmpSyslogCollectorTable as well as
the activation and deactivation of these entries.
When this object's value is set to notInService(2) this
collector will not be sent any messages, nor will any of its
counters be incremented.
The agent SHOULD not delete a row, except in the case of
the loss of persistent storage.
Refer to the RowStatus convention for further details on
the behavior of this object. |
| SYS snmpSyslogCollectorDefaultUdpPort | 1.3.6.1.4.1.9.6.1.101.82.1.2.5 | SyslogUdpPort | read-write | The default UDP port number that the managed entity is
using to send syslog messages.
This value will be used as the default value for
snmpSyslogCollectorUdpPort when creating rows in the
snmpSyslogCollectorTable and either:
1.) no value is specified for snmpSyslogCollectorUdpPort, or
2.) snmpSyslogCollectorUdpPort is implemented read-only.
If snmpSyslogCollectorUdpPort is implemented read-only,
and this value is changed, it SHOULD affect the UDP
port that is used to send syslog messages to all
collectors as soon as it is practical.
This parameter value is maintained across system reboots. |
| SYS snmpSyslogCollectorDefaultFacility | 1.3.6.1.4.1.9.6.1.101.82.1.2.6 | SyslogFacility | read-write | The default syslog facility (local0-local7) that will be
encoded in syslog messages.
This value will be used as the default value for
snmpSyslogCollectorFacility when creating rows in the
snmpSyslogCollectorTable and either:
1.) no value is specified for snmpSyslogCollectorFacility, or
2.) snmpSyslogCollectorFacility is implemented read-only.
If snmpSyslogCollectorFacility is implemented read-only,
and this value is changed, it SHOULD affect the syslog
facility that is encoded in all syslog messages as soon
as it is practical.
This parameter value is maintained across system reboots. |
| SYS snmpSyslogCollectorDefaultSeverity | 1.3.6.1.4.1.9.6.1.101.82.1.2.7 | SyslogSeverity | read-write | The default syslog message severity level that will be used
to filter all syslog messages.
This value will be used as the default value for
snmpSyslogCollectorSeverity when creating rows in the
snmpSyslogCollectorTable and either:
1.) no value is specified for snmpSyslogCollectorSeverity, or
2.) snmpSyslogCollectorSeverity is implemented read-only.
The higher the severity level, the less critical it is.
If snmpSyslogCollectorSeverity is implemented read-only,
and this value is changed, it SHOULD affect the syslog
message severity level that will be used to filter all
syslog messages as soon as it is practical.
This parameter value is maintained across system reboots. |
| snmpSyslogApplication | 1.3.6.1.4.1.9.6.1.101.82.1.3 | | | |
| snmpSyslogApplicationTable | 1.3.6.1.4.1.9.6.1.101.82.1.3.1 | | not-accessible | This is a table of applications on the managed entity
that provide individual control over the severity level
of the messages that they will generate. |
| snmpSyslogApplicationEntry | 1.3.6.1.4.1.9.6.1.101.82.1.3.1.1 | | not-accessible | An individual application that provides that ability
to control the messages that it generates based on a
severity level.
MUST be considered non-volatile and MUST be maintained
across entity resets. |
| U32 snmpSyslogApplicationIndex | 1.3.6.1.4.1.9.6.1.101.82.1.3.1.1.1 | Unsigned32 | not-accessible | A unique arbitrary identifier for this application. |
| STR snmpSyslogApplicationDescription | 1.3.6.1.4.1.9.6.1.101.82.1.3.1.1.2 | SnmpAdminString | read-only | Textual description of this application, assigned by
the managed entity. |
| STR snmpSyslogApplicationMnemonic | 1.3.6.1.4.1.9.6.1.101.82.1.3.1.1.3 | SnmpAdminString | read-only | An abbreviation of the textual description for this
application, assigned by the managed entity.
i.e. 'STP' for 'Spanning Tree Protocol', etc.
This provides a mapping between the textual descriptions
and the mnemonics used in the syslog messages. |
| SYS snmpSyslogApplicationSeverity | 1.3.6.1.4.1.9.6.1.101.82.1.3.1.1.4 | SyslogSeverity | read-write | The maximum severity level of the messages from this
application that SHOULD be forwarded to the syslog
device software for processing.
The higher the severity level, the more verbose the
messages. |
| snmpSyslogDeviceConformance | 1.3.6.1.4.1.9.6.1.101.82.1.4 | | | |
| snmpSyslogDeviceGroups | 1.3.6.1.4.1.9.6.1.101.82.1.4.1 | | | |
| snmpSyslogDeviceGroup | 1.3.6.1.4.1.9.6.1.101.82.1.4.1.1 | | | A collection of objects providing syslog message
statistics. |
| snmpSyslogCollectorGroup | 1.3.6.1.4.1.9.6.1.101.82.1.4.1.2 | | | A collection of objects providing descriptions of
syslog collectors for sending system messages to. |
| snmpSyslogApplicationGroup | 1.3.6.1.4.1.9.6.1.101.82.1.4.1.3 | | | A collection of objects providing a mechanism to
control the severity level of the messages individual
application may generate. |
| snmpSyslogCollectorDefaultsGroup | 1.3.6.1.4.1.9.6.1.101.82.1.4.1.4 | | | A collection of objects providing default values for
the syslog collectors that can optionally be overridden
on a per collector basis with snmpSyslogCollectorFacility,
snmpSyslogCollectorSeverity, or snmpSyslogCollectorUdpPort. |
| snmpSyslogDeviceCompliances | 1.3.6.1.4.1.9.6.1.101.82.1.4.2 | | | |
| snmpSyslogDeviceCompliance | 1.3.6.1.4.1.9.6.1.101.82.1.4.2.1 | | | The compliance statement for devices that support sending
system messages to a syslog collector. |
