All MIBs › DRAFT-IETF-SYSLOG-DEVICE-MIB › snmpSyslogCollectorDefaultSeverity
snmpSyslogCollectorDefaultSeverity
Module: DRAFT-IETF-SYSLOG-DEVICE-MIB
OID (symbolic): DRAFT-IETF-SYSLOG-DEVICE-MIB::snmpSyslogCollectorDefaultSeverity
OID (numeric): 1.3.6.1.4.1.9.6.1.101.82.1.2.7
Node type: OBJECT-TYPE
Type: SyslogSeverity
Access: read-write
Description: The default syslog message severity level that will be used to filter all syslog messages.
This value will be used as the default value for snmpSyslogCollectorSeverity when creating rows in the snmpSyslogCollectorTable and either:
1.) no value is specified for snmpSyslogCollectorSeverity, or 2.) snmpSyslogCollectorSeverity is implemented read-only.
The higher the severity level, the less critical it is.
If snmpSyslogCollectorSeverity is implemented read-only, and this value is changed, it SHOULD affect the syslog message severity level that will be used to filter all syslog messages as soon as it is practical.
This parameter value is maintained across system reboots.
What is snmpSyslogCollectorDefaultSeverity?
The device-wide default severity filter (error by default) applied to any collector that doesn't set its own, or on devices where severity can't be configured per collector; this value survives a reboot.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.82.1.2.7 snmpwalk -v2c -c public <target> DRAFT-IETF-SYSLOG-DEVICE-MIB::snmpSyslogCollectorDefaultSeverity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.82.1.2.7.1 snmpget -v2c -c public <target> DRAFT-IETF-SYSLOG-DEVICE-MIB::snmpSyslogCollectorDefaultSeverity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.82.1.2.7.1 s <value>
Start monitoring Network device/server generating syslog messages (vendor-neutral IETF draft standard, Cisco-authored) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DRAFT-IETF-SYSLOG-DEVICE-MIB::snmpSyslogCollectorDefaultSeverity OID value, configure state conditions and alerts, and monitor any Network device/server generating syslog messages (vendor-neutral IETF draft standard, Cisco-authored) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.6 | otherEnterprises | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1 | ciscoSB | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1.101 | switch001 | CISCOSB-MIB |
| 1.3.6.1.4.1.9.6.1.101.82 | rlSyslog | CISCOSB-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.6.1.101.82.1 | snmpSyslogDeviceMIB | DRAFT-IETF-SYSLOG-DEVICE-MIB |
| 1.3.6.1.4.1.9.6.1.101.82.1.2 | snmpSyslogCollector | DRAFT-IETF-SYSLOG-DEVICE-MIB |
| 1.3.6.1.4.1.9.6.1.101.82.1.2.7 | snmpSyslogCollectorDefaultSeverity | DRAFT-IETF-SYSLOG-DEVICE-MIB |