All MIBs › DRAFT-IETF-SYSLOG-DEVICE-MIB › snmpSyslogCollectorTableNextAvailableIndex
snmpSyslogCollectorTableNextAvailableIndex
Module: DRAFT-IETF-SYSLOG-DEVICE-MIB
OID (symbolic): DRAFT-IETF-SYSLOG-DEVICE-MIB::snmpSyslogCollectorTableNextAvailableIndex
OID (numeric): 1.3.6.1.4.1.9.6.1.101.82.1.2.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This object indicates the numerically lowest available index within this entity, which may be used for the value of snmpSyslogCollectorIndex in the creation of a new entry in the snmpSyslogCollectorTable.
An index is considered available if the index value falls within the range of 1 to 8 and is not being used to index an existing entry in the snmpSyslogCollectorTable contained within this entity.
A value of zero indicates that all of the entries in the snmpSyslogCollectorTable are currently in use.
This value SHOULD only be considered a guideline for management creation of snmpSyslogCollectorEntries, there is no requirement on management to create entries based upon this index value.
What is snmpSyslogCollectorTableNextAvailableIndex?
The lowest unused index (1-8) available for creating a new syslog collector row; a value of 0 means the collector table is full and no new entries can be added until one is removed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.82.1.2.3 snmpwalk -v2c -c public <target> DRAFT-IETF-SYSLOG-DEVICE-MIB::snmpSyslogCollectorTableNextAvailableIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.82.1.2.3.1 snmpget -v2c -c public <target> DRAFT-IETF-SYSLOG-DEVICE-MIB::snmpSyslogCollectorTableNextAvailableIndex.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> snmpSyslogCollectorTableNextAvailableIndex.1
Start monitoring Network device/server generating syslog messages (vendor-neutral IETF draft standard, Cisco-authored) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DRAFT-IETF-SYSLOG-DEVICE-MIB::snmpSyslogCollectorTableNextAvailableIndex OID value, configure state conditions and alerts, and monitor any Network device/server generating syslog messages (vendor-neutral IETF draft standard, Cisco-authored) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.6 | otherEnterprises | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1 | ciscoSB | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1.101 | switch001 | CISCOSB-MIB |
| 1.3.6.1.4.1.9.6.1.101.82 | rlSyslog | CISCOSB-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.6.1.101.82.1 | snmpSyslogDeviceMIB | DRAFT-IETF-SYSLOG-DEVICE-MIB |
| 1.3.6.1.4.1.9.6.1.101.82.1.2 | snmpSyslogCollector | DRAFT-IETF-SYSLOG-DEVICE-MIB |
| 1.3.6.1.4.1.9.6.1.101.82.1.2.3 | snmpSyslogCollectorTableNextAvailableIndex | DRAFT-IETF-SYSLOG-DEVICE-MIB |