| OID symbolic | OID numeric | Type | Access | Description |
|---|
| docsDevTraps | 1.3.6.1.2.1.69.2.1 | | | |
| docsDevTrapControl | 1.3.6.1.2.1.69.2.1.1 | | | |
| BIT docsDevCmTrapControl | 1.3.6.1.2.1.69.2.1.1.1 | Bits | read-write | The object is used to enable CM traps. From left to right,
the set bit indicates the corresponding CM trap is enabled.
For example, if the first bit is set, then
docsDevCmInitTLVUnknownTrap is enabled. If it is zero,
the trap is disabled. |
| BIT docsDevCmtsTrapControl | 1.3.6.1.2.1.69.2.1.1.2 | Bits | read-write | The object is used to enable CMTS traps. From left to right,
the set bit indicates the corresponding CMTS trap is enabled.
For example, if the first bit is set, then
docsDevCmtsInitRegRspFailTrap is enabled. If it is zero,
the trap is disabled. |
| docsDevTrapConformance | 1.3.6.1.2.1.69.2.1.2 | | | |
| docsDevCmTraps | 1.3.6.1.2.1.69.2.1.2.0 | | | |
| NTF docsDevCmInitTLVUnknownTrap | 1.3.6.1.2.1.69.2.1.2.0.1 | | | Event due to detection of unknown TLV during
the TLV parsing process.
The values of docsDevEvLevel, docsDevId, and
DocsDevEvText are from the entry which logs this event
in the docsDevEventTable. The docsIfDocsisCapability
and docsIfDocsisOperMode indicate the DOCSIS version
information. The ifPhysAddress value is the MAC
address of the cable interface of this cable modem.
The docsIfCmCmtsAddress specifies the MAC address
of the CMTS to which the CM is connected (if there is a cable
card/interface in the CMTS, then it is actually the MAC
address of the cable interface which connected to the CM).
This part of information is uniformed across all CM traps. |
| NTF docsDevCmDynServReqFailTrap | 1.3.6.1.2.1.69.2.1.2.0.2 | | | An event to report the failure of a dynamic service
request happened during the dynamic services process. |
| NTF docsDevCmDynServRspFailTrap | 1.3.6.1.2.1.69.2.1.2.0.3 | | | An event to report the failure of a dynamic service
response happened during the dynamic services process. |
| NTF docsDevCmDynServAckFailTrap | 1.3.6.1.2.1.69.2.1.2.0.4 | | | An event to report the failure of a dynamic service
acknowledgement happened during the dynamic services process. |
| NTF docsDevCmBpiInitTrap | 1.3.6.1.2.1.69.2.1.2.0.5 | | | An event to report the failure of a BPI initialization
attempt happened during the registration process. |
| NTF docsDevCmBPKMTrap | 1.3.6.1.2.1.69.2.1.2.0.6 | | | An event to report the failure of a BPKM operation. |
| NTF docsDevCmDynamicSATrap | 1.3.6.1.2.1.69.2.1.2.0.7 | | | An event to report the failure of a dynamic security
association operation. |
| NTF docsDevCmDHCPFailTrap | 1.3.6.1.2.1.69.2.1.2.0.8 | | | An event to report the failure of a DHCP server.
The value of docsDevServerDhcp is the IP address
of the DHCP server. |
| NTF docsDevCmSwUpgradeInitTrap | 1.3.6.1.2.1.69.2.1.2.0.9 | | | An event to report a software upgrade initiated
event. The values of docsDevSwFilename, and
docsDevSwServer indicate the software image name
and the server IP address the image is from. |
| NTF docsDevCmSwUpgradeFailTrap | 1.3.6.1.2.1.69.2.1.2.0.10 | | | An event to report the failure of a software upgrade
attempt. The values of docsDevSwFilename, and
docsDevSwServer indicate the software image name
and the server IP address the image is from. |
| NTF docsDevCmSwUpgradeSuccessTrap | 1.3.6.1.2.1.69.2.1.2.0.11 | | | An event to report the Software upgrade success event.
The values of docsDevSwFilename, and
docsDevSwServer indicate the software image name
and the server IP address the image is from. |
| NTF docsDevCmSwUpgradeCVCFailTrap | 1.3.6.1.2.1.69.2.1.2.0.12 | | | An event to report the failure of the verification
of code file happened during a secure software upgrade
attempt. |
| NTF docsDevCmTODFailTrap | 1.3.6.1.2.1.69.2.1.2.0.13 | | | An event to report the failure of a time of day server.
The value of docsDevServerTime indicates the server IP
address. |
| NTF docsDevCmDCCReqFailTrap | 1.3.6.1.2.1.69.2.1.2.0.14 | | | An event to report the failure of a dynamic channel
change request happened during the dynamic channel
change process in the CM side. |
| NTF docsDevCmDCCRspFailTrap | 1.3.6.1.2.1.69.2.1.2.0.15 | | | An event to report the failure of a dynamic channel
change response happened during the dynamic channel
change process in the CM side. |
| NTF docsDevCmDCCAckFailTrap | 1.3.6.1.2.1.69.2.1.2.0.16 | | | An event to report the failure of a dynamic channel
change acknowledgement happened during the dynamic channel
change process in the CM side. |
| docsDevTrapGroups | 1.3.6.1.2.1.69.2.1.2.1 | | | |
| docsDevCmTrapControlGroup | 1.3.6.1.2.1.69.2.1.2.1.1 | | | CM must support docsDevCmTrapControl. |
| docsDevCmNotificationGroup | 1.3.6.1.2.1.69.2.1.2.1.2 | | | A collection of CM notifications providing device status and
control. |
| docsDevCmtsTrapControlGroup | 1.3.6.1.2.1.69.2.1.2.1.3 | | | CMTS must support docsDevCmtsTrapControl. |
| docsDevCmtsNotificationGroup | 1.3.6.1.2.1.69.2.1.2.1.4 | | | A collection of CMTS notifications providing device status and
control. |
| docsDevTrapCompliances | 1.3.6.1.2.1.69.2.1.2.2 | | | |
| docsDevCmTrapCompliance | 1.3.6.1.2.1.69.2.1.2.2.1 | | | The compliance statement for Cable Modem Traps and Control. |
| docsDevCmtsTrapCompliance | 1.3.6.1.2.1.69.2.1.2.2.2 | | | The compliance statement for MCNS Cable Modems and
Cable Modem Termination Systems. |
| docsDevCmtsTraps | 1.3.6.1.2.1.69.2.1.3.0 | | | |
| NTF docsDevCmtsInitRegReqFailTrap | 1.3.6.1.2.1.69.2.1.3.0.1 | | | An event to report the failure of a registration
request from CM happened during the CM initialization
process and detected in the CMTS side.
The values of docsDevEvLevel, docsDevId, and
DocsDevEvText are from the entry which logs this event
in the docsDevEventTable. DocsIfCmtsCmStatusDocsisMode
and docsIfCmtsCmStatusMacAddress indicate the docsis
version and the MAC address of the requesting CM.
docsIfDocsisCapability and ifPhysAddress
indicate the docsis version of the CMTS and the MAC
address of the CMTS (if there is a cable
card/interface in the CMTS, then it is actually the MAC
address of the cable interface which connected to the CM)
cable card connected to the CM.
This part of information is uniformed across all CMTS traps. |
| NTF docsDevCmtsInitRegRspFailTrap | 1.3.6.1.2.1.69.2.1.3.0.2 | | | An event to report the failure of a registration
response happened during the CM initialization
process and detected in the CMTS side. |
| NTF docsDevCmtsInitRegAckFailTrap | 1.3.6.1.2.1.69.2.1.3.0.3 | | | An event to report the failure of a registration
acknowledgement from CM happened during the CM
initialization process and detected in the CMTS side. |
| NTF docsDevCmtsDynServReqFailTrap | 1.3.6.1.2.1.69.2.1.3.0.4 | | | An event to report the failure of a dynamic service
request happened during the dynamic services process
and detected in the CMTS side. |
| NTF docsDevCmtsDynServRspFailTrap | 1.3.6.1.2.1.69.2.1.3.0.5 | | | An event to report the failure of a dynamic service
response happened during the dynamic services process
and detected in the CMTS side. |
| NTF docsDevCmtsDynServAckFailTrap | 1.3.6.1.2.1.69.2.1.3.0.6 | | | An event to report the failure of a dynamic service
acknowledgement happened during the dynamic services
process and detected in the CMTS side. |
| NTF docsDevCmtsBpiInitTrap | 1.3.6.1.2.1.69.2.1.3.0.7 | | | An event to report the failure of a BPI initialization
attempt happened during the CM registration process
and detected in the CMTS side. |
| NTF docsDevCmtsBPKMTrap | 1.3.6.1.2.1.69.2.1.3.0.8 | | | An event to report the failure of a BPKM operation
which is detected in the CMTS side. |
| NTF docsDevCmtsDynamicSATrap | 1.3.6.1.2.1.69.2.1.3.0.9 | | | An event to report the failure of a dynamic security
association operation which is detected in the CMTS side. |
| NTF docsDevCmtsDCCReqFailTrap | 1.3.6.1.2.1.69.2.1.3.0.10 | | | An event to report the failure of a dynamic channel
change request happened during the dynamic channel
change process in the CM side and detected in the
CMTS side. |
| NTF docsDevCmtsDCCRspFailTrap | 1.3.6.1.2.1.69.2.1.3.0.11 | | | An event to report the failure of a dynamic channel
change response happened during the dynamic channel
change process in the CMTS side. |
| NTF docsDevCmtsDCCAckFailTrap | 1.3.6.1.2.1.69.2.1.3.0.12 | | | An event to report the failure of a dynamic channel
change acknowledgement happened during the dynamic channel
change process in the CMTS side. |
| docsDevTrapMIB | 1.3.6.1.2.1.69.10 | | | CABLE DEVICE TRAP MIB is an extension of the
CABLE DEVICE MIB defined in RFC2669.
It defines various trap objects for both cable
modem and cable modem termination system.
There are two groups of SNMP notification objects are defined.
One group is for notifying cable modem events and one group
for notifying cable modem termination system events.
Common to all CM notification objects (traps) is that
in their OBJECTS statements, A CM trap contains information
about the event priority, the event Id, the event message
body, the CM DOCSIS capability, the CM DOCSIS register
registration status, the cable interface MAC address of
the cable modem and the cable card MAC address of the CMTS
to which the modem is connected to.
These objects are docsDevEvLevel, docsDevId, docsDevEvText,
docsIfDocsisCapability, docsIfDocsisOperMode,
ifPhysAddress and docsIfCmCmtsAddress. The values of
docsDevEvLevel, docsDevId, and docsDevEvText are from
the entry which logs this event in the
docsDevEventTable, which is defined in
DOCS-CABLE-DEVICE-MIB of RFC2669. The docsIfDocsisCapability
and docsIfDocsisOperMode are defined in DOCS-IF-EXT-MIB.
The ifPhysAddress value is the MAC address of the cable
interface of this cable modem. The docsIfCmCmtsAddress
specifies the MAC address of the CMTS (if there is a cable
card/interface in the CMTS, then it is actually the
cable interface interface MAC address to which the CM is connected).
Individual CM trap may contain additional objects to
provide necessary information.
Common to all CMTS notification objects (traps) is that
in their OBJECTS statements, A CMTS trap contains information
about the event priority, the event Id, the event message
body, the connected CM DOCSIS register status, the CM cable
interface MAC address, the CMTS DOCSIS register status and
the CMTS MAC address.
These objects are docsDevEvLevel, docsDevId, docsDevEvText,
docsIfCmtsCmStatusDocsisMode, docsIfCmtsCmStatusMacAddress,
docsIfDocsisCapability, and ifPhysAddress. The values of
docsDevEvLevel, docsDevId, and docsDevEvText are
similar to what in CM traps. The values of
docsIfCmtsCmStatusDocsisMode and
docsIfCmtsCmStatusMacAddress are from the
docsIfCmtsCmStatusEntry (defined in DOCS-IF-MIB)
corresponding to a conneced CM. The docsIfDocsisCapability
indicates the CMTS DOCSIS capability.
The ifPhysAddress value is the CMTS MAC address (if there is a cable
card/interface in the CMTS, then it is actually the MAC address
of the cable interface which connected to the CM). |
