DSG-IF-MIB

All MIBs › DSG-IF-MIB

Organization: Cable Television Laboratories, Inc

Last Updated: 2017-06-15

Category: Domain: CATV/Cable, Standard: DOCSIS

Description: Manages the DOCSIS Set-top Gateway (DSG) interface for delivering out-of-band data to cable set-top boxes.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DSG-IF-MIB?

DSG-IF-MIB is a CableLabs/DOCSIS-standard MIB (distributed under an Apache license) that manages the DOCSIS Set-top Gateway (DSG) interface, which delivers out-of-band data and control messages to cable set-top boxes over a DOCSIS network. It exposes classifier tables that define how downstream traffic is filtered and tunneled to set-top devices based on source/destination IP and port criteria, along with notification and conformance object groups. As a network-interface MIB, it is used to monitor the operational health of the DSG classification pipeline on a cable headend/CMTS: administrators can verify classifier rule status (dsgIfClassifierEntry/dsgIfClassRowStatus) to confirm set-top box provisioning traffic is being correctly filtered and forwarded, and use the notifications group to catch DSG-related faults. It builds on the broader DOCSIS interface MIB family and depends on standard interface MIB conventions for underlying interface indexing. It is deployed on cable headend equipment (CMTS or edge QAM/DSG servers) supporting out-of-band communication to set-top boxes in a DOCSIS cable network. Network engineers evaluating or troubleshooting this functionality can download the DSG-IF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DSG-IF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

cable headend/CMTS equipment supporting DOCSIS Set-top Gateway (DSG)
vendor-neutral, standards-based MIB (CableLabs/DOCSIS), not tied to one manufacturer

Monitoring Examples

An admin would inspect dsgIfClassifierTable/dsgIfClassifierEntry rows to confirm classifier rules matching dsgIfClassSrcIpAddr/dsgIfClassDestIpAddress and port ranges are active (dsgIfClassPriority, dsgIfClassRowStatus) for routing set-top box control traffic. A missing or inactive classifier entry would explain set-top boxes failing to receive DSG tunnel data and losing out-of-band signaling. Monitoring dsgIfMIBNotifications helps catch classifier configuration errors or DSG tunnel failures as they occur.

What Can Be Monitored

DSG classifier rule status
source/destination IP and port match criteria
classifier priority and row status
DSG interface notifications/faults

Imported Objects

From CLAB-DEF-MIB

clabProjDocsis

OBJECT-IDENTITY

From DOCS-IF3-MIB

Dsid

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType
InetPortNumber

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using dsgIfTunnelDsStatsPkts OID:

Select a cable headend/CMTS equipment as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type dsgIfTunnelDsStatsPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. This attribute indicates the count of the number of packets transmitted in this tunnel. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in packets), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
dsgIfMIB	1.3.6.1.4.1.4491.2.1.3			Licensed under the Apache License, Version 2.0 (the 'License'); you may not use this file except in compliance with the License. You may obtain a copy of the License at: http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an 'AS IS' BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. This is the MIB Module for the DOCSIS Set-top Gateway (DSG). The DSG provides a one-way IP datagram transport for Out-Of-Band (OOB) messaging to cable set-top clients. The one-way IP datagram transport is called a DSG Tunnel. A DSG Tunnel carrying either a broadcast, unicast or multicast IP datagram stream originating at the DOCSIS Set-top Gateway and carrying Out-Of-Band messages intended for set-top clients. It is carried over one or more downstream DOCSIS channels. Multiple DSG tunnels may exist on a single downstream DOCSIS channel. Copyright 1999-2017 Cable Television Laboratories, Inc. All rights reserved.
dsgIfMIBNotifications	1.3.6.1.4.1.4491.2.1.3.0
dsgIfMIBObjects	1.3.6.1.4.1.4491.2.1.3.1
dsgIfClassifier	1.3.6.1.4.1.4491.2.1.3.1.1
dsgIfClassifierTable	1.3.6.1.4.1.4491.2.1.3.1.1.1		not-accessible	The Classifier Table contains attributes use to classify inbound packets into the tunnel and classifiers for the DSG clients, encoding in the DCD messages on the downstream channels to which the classifiers apply.
dsgIfClassifierEntry	1.3.6.1.4.1.4491.2.1.3.1.1.1.1		not-accessible	An entry in the Classifier Table. Rows are created by an SNMP SET request setting the value of dsgIfClassRowStatus to 'createAndGo'. Each entry is created for a tunnel, index by dsgTunnelIndex. Rows are deleted by an SNMP SET request setting the value of dsgIfClassRowStatus to 'destroy'.
U32 dsgIfClassId	1.3.6.1.4.1.4491.2.1.3.1.1.1.1.1	Unsigned32	not-accessible	The index that provides a unique classifier (in a DSG Agent). This value corresponds to the Classifier ID TLV in the DCD message.
U32 dsgIfClassPriority	1.3.6.1.4.1.4491.2.1.3.1.1.1.1.2	Unsigned32	read-create	The priority of this classifier. Default value 0 indicates lowest priority.
IPt dsgIfClassSrcIpAddrType	1.3.6.1.4.1.4491.2.1.3.1.1.1.1.3	InetAddressType	read-create	The type of internet address of dsgIfClassSrcIpAddress. Currently DSG Agents, DSG Client Controllers and DSG eCMs are not required to support IPv6 DSG classifiers.
IP dsgIfClassSrcIpAddr	1.3.6.1.4.1.4491.2.1.3.1.1.1.1.4	InetAddress	read-create	The source IP address to be matched for this classifier. A value 0 for this object indicates a match of any IP address. A value that contains non-zero bits outside the range indicated by dsgIfClassSrcIpPrefixLength is invalid and should be rejected.
ADR dsgIfClassSrcIpPrefixLength	1.3.6.1.4.1.4491.2.1.3.1.1.1.1.5	InetAddressPrefixLength	read-create	The length of the CIDR Prefix carried in dsgIfClassSrcIpAddr. In IPv4 addresses, a length of 32 indicates a match of a single host address, and a length between 0 and 32 indicates the use of a CIDR Prefix. A length of 0 is not allowed. This object is irrelevant and not used when dsgIfClassSrcIpAddr value is 0.
IPt dsgIfClassDestIpAddressType	1.3.6.1.4.1.4491.2.1.3.1.1.1.1.6	InetAddressType	read-create	The type of internet address of dsgIfClassDestIpAddress. Currently DSG Agents, DSG Client Controllers and DSG eCMs are not required to support IPv6 DSG classifiers.
IP dsgIfClassDestIpAddress	1.3.6.1.4.1.4491.2.1.3.1.1.1.1.7	InetAddress	read-create	The destination IP address to be matched for this classifier.
INE dsgIfClassDestPortStart	1.3.6.1.4.1.4491.2.1.3.1.1.1.1.8	InetPortNumber	read-create	This is the inclusive lower bound of the transport-layer source port range that is to be matched.
INE dsgIfClassDestPortEnd	1.3.6.1.4.1.4491.2.1.3.1.1.1.1.9	InetPortNumber	read-create	This is the inclusive higher bound of the transport-layer source port range that is to be matched.
ROW dsgIfClassRowStatus	1.3.6.1.4.1.4491.2.1.3.1.1.1.1.10	RowStatus	read-create	The status of the row. A value of active(1) indicates that this classifier is applied to this tunnel. A value of notInService(2) indicates that matching of the packets are ignored and this classifier parameters will not be included in the DCD message.
T/F dsgIfClassIncludeInDCD	1.3.6.1.4.1.4491.2.1.3.1.1.1.1.11	TruthValue	read-create	Indicates whether or not this DSG Classifier will be sent in DCD messages for use as a Layer-3 and Layer-4 packet filter by the DSG eCM.
dsgIfTunnel	1.3.6.1.4.1.4491.2.1.3.1.2
dsgIfTunnelTable	1.3.6.1.4.1.4491.2.1.3.1.2.1		not-accessible	The DSG Tunnel Table contains group(s) of tunnel(s). Each tunnel is associated to the destination MAC address.
dsgIfTunnelEntry	1.3.6.1.4.1.4491.2.1.3.1.2.1.1		not-accessible	An entry in the DSG Tunnel Table. Rows are created by an SNMP SET request setting the value of dsgIfTunnelRowStatus to 'createAndGo'. Each entry associated to a tunnel. A dsgIfTunnelGroupIndex represents a group of tunnels that could be associated to one or more downstream. Each dsgIfTunnelIndex represents a tunnel. Rows are deleted by an SNMP SET request setting the value of dsgIfTunnelRowStatus to 'destroy'.
U32 dsgIfTunnelIndex	1.3.6.1.4.1.4491.2.1.3.1.2.1.1.1	Unsigned32	not-accessible	The index into the DSG Tunnel table that represent a tunnel.
U32 dsgIfTunnelGroupIndex	1.3.6.1.4.1.4491.2.1.3.1.2.1.1.2	Unsigned32	read-create	This index represents a group of tunnels that could be associated to one or more downstream which mapped to dsgIfTunnelGrpIndex.
U32 dsgIfTunnelClientIdListIndex	1.3.6.1.4.1.4491.2.1.3.1.2.1.1.3	Unsigned32	read-create	This index represents a group of client id(s) which mapped to dsgIfClientIdListIndex.
MAC dsgIfTunnelMacAddress	1.3.6.1.4.1.4491.2.1.3.1.2.1.1.4	MacAddress	read-create	The DSG tunnel destination MAC address.
STR dsgIfTunnelServiceClassName	1.3.6.1.4.1.4491.2.1.3.1.2.1.1.5	SnmpAdminString	read-create	For DOCSIS 2.0 the Service Class Name is associated to the docsQosServiceClassName in the DOCS-QOS-MIB. For DOCSIS 3.0 the Service Class Name is associated to the docsQosServiceClassName in the DOCS-QOS3-MIB. Creation of a Service Class MUST be configured through the docsQosServiceClassTable. Only partial of the docsQosServiceClassTable objects are applicable to the DSG service class thus some are ignored. If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set, the default value of this object is a zero length string.
ROW dsgIfTunnelRowStatus	1.3.6.1.4.1.4491.2.1.3.1.2.1.1.6	RowStatus	read-create	The status of the row. A value of notInService(2) indicates that this tunnel is disabled and no OOB traffic will be forwarded to DSG clients and this tunnel parameters will not be included in the DCD message.
dsgIfTunnelGrpToChannel	1.3.6.1.4.1.4491.2.1.3.1.3
dsgIfTunnelGrpToChannelTable	1.3.6.1.4.1.4491.2.1.3.1.3.1		not-accessible	The DSG Tunnel Group to Channel Table associates a group of tunnels to one or more downstream channel.
dsgIfTunnelGrpToChannelEntry	1.3.6.1.4.1.4491.2.1.3.1.3.1.1		not-accessible	An entry in the DSG Tunnel Table. Rows are created by an SNMP SET request setting the value of dsgIfTunnelGrpRowStatus to 'createAndGo'. Rows are deleted by an SNMP SET request setting the value of dsgIfTunnelRowStatus to 'destroy'.
U32 dsgIfTunnelGrpIndex	1.3.6.1.4.1.4491.2.1.3.1.3.1.1.1	Unsigned32	not-accessible	The index into this table.
U32 dsgIfTunnelGrpChannelIndex	1.3.6.1.4.1.4491.2.1.3.1.3.1.1.2	Unsigned32	not-accessible	The index into this table.
NUM dsgIfTunnelGrpDsIfIndex	1.3.6.1.4.1.4491.2.1.3.1.3.1.1.3	InterfaceIndex	read-create	The downstream ifIndex that will be associated to this group of tunnel(s).
U32 dsgIfTunnelGrpRulePriority	1.3.6.1.4.1.4491.2.1.3.1.3.1.1.4	Unsigned32	read-create	The DSG rule priority determines the order of which channel and its associated UCIDs should be applied by the DSG client. The default value is 0, which is the lowest priority.
OCT dsgIfTunnelGrpUcidList	1.3.6.1.4.1.4491.2.1.3.1.3.1.1.5	OCTET STRING	read-create	The list of Upstream Channel ID (UCID) values (octets) for which the DSG rule applies. One octet represents one UCID value (0-255). A DSG client matches this parameter if its UCID value is included in the list. The default value of zero length string indicates that this DSG Rule applies to all DSG clients.
U32 dsgIfTunnelGrpVendorParamId	1.3.6.1.4.1.4491.2.1.3.1.3.1.1.6	Unsigned32	read-create	The index of vendor parameter, dsgIfVendorParamId in the dsgIfVendorParamTable describing the vendor specific DSG parameters. If no associated entry in dsgIfVendorParamTable exists, this value is 0.
ROW dsgIfTunnelGrpRowStatus	1.3.6.1.4.1.4491.2.1.3.1.3.1.1.7	RowStatus	read-create	The status of this row. The value of notInService(2) indicates that this tunnel group is disabled and no OOB traffic on all the associated tunnel(s) will be forwarded to DSG clients and all parameters will not be included in the DCD message.
dsgIfDownstreamChannel	1.3.6.1.4.1.4491.2.1.3.1.4
dsgIfDownstreamTable	1.3.6.1.4.1.4491.2.1.3.1.4.1		not-accessible	The DSG Downstream Table contains the associated timers, vendor specific parameters index and the channel list index to a specific downstream.
dsgIfDownstreamEntry	1.3.6.1.4.1.4491.2.1.3.1.4.1.1		not-accessible	An entry in the DSG Downstream Table. An entry in this table exists for each ifEntry with an ifType of docsCableDownstream(128).
U32 dsgIfDownTimerIndex	1.3.6.1.4.1.4491.2.1.3.1.4.1.1.1	Unsigned32	read-write	The index into the timer table, dsgIfTimerTable providing the timers used by the DSG client(s). The default value 0 indicates there is no associated timers that need to be sent in the DCD message.
U32 dsgIfDownVendorParamId	1.3.6.1.4.1.4491.2.1.3.1.4.1.1.2	Unsigned32	read-write	The index of vendor parameter, dsgIfVendorParamId in the dsgIfVendorParamTable describing the vendor specific DSG parameters. If no associated entry in dsgIfVendorParamTable exists, this value is 0.
U32 dsgIfDownChannelListIndex	1.3.6.1.4.1.4491.2.1.3.1.4.1.1.3	Unsigned32	read-write	The index of a the downstream frequency channel lists, dsgIfChannelListIndex in the dsgIfChannelListTable providing the list of downstream frequencies that contain DSG tunnels.
T/F dsgIfDownEnableDCD	1.3.6.1.4.1.4491.2.1.3.1.4.1.1.4	TruthValue	read-write	Used to enable or disable DCD messages to be sent on this downstream channel. The value is always true(1) for those downstreams that contains one or many DSG Tunnels.
dsgIfDCD	1.3.6.1.4.1.4491.2.1.3.1.5
dsgIfClientIdTable	1.3.6.1.4.1.4491.2.1.3.1.5.1		not-accessible	The Client Identification Table contains the client identification type and value. It also contains the vendor specific parameter identification. There could be multiple client ids associated to a tunnel, grouped by the dsgIfClientIdListIndex.
dsgIfClientIdEntry	1.3.6.1.4.1.4491.2.1.3.1.5.1.1		not-accessible	An entry in the Client Id Table. Rows are created by an SNMP SET request setting the value of dsgIfClientRowStatus to 'createAndGo'. Rows are deleted by an SNMP SET request setting the value of dsgIfClientIdRowStatus to 'destroy'.
U32 dsgIfClientIdListIndex	1.3.6.1.4.1.4491.2.1.3.1.5.1.1.1	Unsigned32	not-accessible	The index to this table.
U32 dsgIfClientIdIndex	1.3.6.1.4.1.4491.2.1.3.1.5.1.1.2	Unsigned32	not-accessible	The index to each entry of the Client Id.
INT dsgIfClientIdType	1.3.6.1.4.1.4491.2.1.3.1.5.1.1.3	INTEGER	read-create	The Client Identification type. A DSG client id of type broadcast(1) received by all DSG client(s). A DSG client id of type macAddress(2) is received by the DSG client that has been assigned with this MAC address where the first 3 bytes is the Organization Unique Identifier (OUI). A DSG client id of type caSystemId(3) is received by the DSG client that has been assigned a CA_system_ID. A DSG client id of type applicationId(4) is received by the DSG client that has been assigned an application ID.
OCT dsgIfClientIdValue	1.3.6.1.4.1.4491.2.1.3.1.5.1.1.4	OCTET STRING	read-create	The Client Identification Value. The content depends on the value of the dsgIfClientIdType. For dsgIfClientIdType of a type broadcast(1), this object will have a 16-bit value whether or not it is a length 0 or length 2 broadcast ID. If the value is 0, then the encoded TLV in the DCD would be the original, zero length, broadcast ID. If the value is specified in Table 5-2, then the TLV in the DCD would be a length 2 broadcast ID followed by the value. For dsgIfClientIdType of a type macAddress(2), this object is a well known MAC address. For dsgIfClientIdType of a type caSystemId(3), this object is a CA System ID. For dsgIfClientIdType of a type applicationId(4), this object is an application ID. Client IDs representing types broadcast(1), caSystemId(3) or applicationId(4) are encoded in DCD messages as Unsigned integers and configured in this object as 6 octet string with the 2 LSB for the client ID value, e.g., an applicationId 2048 (0x0800) is encoded as '000000000800'h.
U32 dsgIfClientVendorParamId	1.3.6.1.4.1.4491.2.1.3.1.5.1.1.5	Unsigned32	read-create	The index of the vendor parameter id, dsgIfVendorParamId in the dsgIfVendorParamTable describing the vendor specific DSG parameters. If no associated entry in dsgIfVendorParamTable exists, this value is 0.
ROW dsgIfClientRowStatus	1.3.6.1.4.1.4491.2.1.3.1.5.1.1.6	RowStatus	read-create	The status of the row.
dsgIfVendorParamTable	1.3.6.1.4.1.4491.2.1.3.1.5.2		not-accessible	The DSG Vendor Parameter Table allows vendors to send specific parameters to the DSG clients within a DSG rule or within the DSG Configuration block in a DCD message.
dsgIfVendorParamEntry	1.3.6.1.4.1.4491.2.1.3.1.5.2.1		not-accessible	An entry in the DSG Vendor Parameter Table. Rows are created by an SNMP SET request setting the value of dsgIfVendorRowStatus to 'createAndGo'. Each entry represents one or more vendor's specific parameters. Rows are deleted by an SNMP SET request setting the value of dsgIfVendorRowStatus to 'destroy'. There are limits to the amount of vendor specific information that can be carried in a DSG Rule or DSG Configuration block. An SNMP SET request which would result in these limits being exceeded should be rejected.
U32 dsgIfVendorParamId	1.3.6.1.4.1.4491.2.1.3.1.5.2.1.1	Unsigned32	not-accessible	The index of the table.
U32 dsgIfVendorIndex	1.3.6.1.4.1.4491.2.1.3.1.5.2.1.2	Unsigned32	not-accessible	The Vendor Specific Index.
OCT dsgIfVendorOUI	1.3.6.1.4.1.4491.2.1.3.1.5.2.1.3	OCTET STRING	read-create	The Vendor assigned Organization Unique Id (OUI).
OCT dsgIfVendorValue	1.3.6.1.4.1.4491.2.1.3.1.5.2.1.4	OCTET STRING	read-create	The Vendor Specific Parameter Value.
ROW dsgIfVendorRowStatus	1.3.6.1.4.1.4491.2.1.3.1.5.2.1.5	RowStatus	read-create	The status of the row.
dsgIfChannelListTable	1.3.6.1.4.1.4491.2.1.3.1.5.3		not-accessible	The DSG Channel List Table contains list of one or multiple downstream frequencies that are carrying DSG tunnel(s).
dsgIfChannelListEntry	1.3.6.1.4.1.4491.2.1.3.1.5.3.1		not-accessible	An entry in the DSG Channel List Table. Rows are created by an SNMP SET request setting the value of dsgIfChannelRowStatus to 'createAndGo'. Rows are deleted by an SNMP SET request setting the value of dsgIfChannelRowStatus to 'destroy'.
U32 dsgIfChannelListIndex	1.3.6.1.4.1.4491.2.1.3.1.5.3.1.1	Unsigned32	not-accessible	The index to this table.
U32 dsgIfChannelIndex	1.3.6.1.4.1.4491.2.1.3.1.5.3.1.2	Unsigned32	not-accessible	The index for each downstream frequency that contains the DSG tunnel(s).
I32 dsgIfChannelDsFreq	1.3.6.1.4.1.4491.2.1.3.1.5.3.1.3	Integer32	read-create	The DOCSIS downstream center frequency. The receive frequency MUST be a multiple of 62500Hz.
ROW dsgIfChannelRowStatus	1.3.6.1.4.1.4491.2.1.3.1.5.3.1.4	RowStatus	read-create	The status of the row.
dsgIfTimerTable	1.3.6.1.4.1.4491.2.1.3.1.5.4		not-accessible	The DSG Timer Table contains timers that are sent to the DSG client(s) via the DCD message.
dsgIfTimerEntry	1.3.6.1.4.1.4491.2.1.3.1.5.4.1		not-accessible	An entry in the DSG Timer Table. Rows are created by an SNMP SET request setting the value of dsgIfTimerRowStatus to 'createAndGo'. Rows are deleted by an SNMP SET request setting the value of dsgIfTimerRowStatus to 'destroy'.
U32 dsgIfTimerIndex	1.3.6.1.4.1.4491.2.1.3.1.5.4.1.1	Unsigned32	not-accessible	The index to this table.
U32 dsgIfTimerTdsg1	1.3.6.1.4.1.4491.2.1.3.1.5.4.1.2	Unsigned32	read-create	Initialization Timeout. This is the timeout period for the DSG packets during initialization of the DSG client. The default value is 2 seconds.
U32 dsgIfTimerTdsg2	1.3.6.1.4.1.4491.2.1.3.1.5.4.1.3	Unsigned32	read-create	Operational Timeout. This is the timeout period for the DSG packets during normal operation of the DSG client. Default value is 600 seconds.
U32 dsgIfTimerTdsg3	1.3.6.1.4.1.4491.2.1.3.1.5.4.1.4	Unsigned32	read-create	Two-way retry timer. This is the retry timer that determines when the DSG client attempts to reconnect with the DSG Agent and established two-way connectivity. Default value is 300 seconds. The value 0 indicates that the client will continuously retry two-way operation.
U32 dsgIfTimerTdsg4	1.3.6.1.4.1.4491.2.1.3.1.5.4.1.5	Unsigned32	read-create	One-way retry timer. The retry timer that determines when the client attempts to rescan for a DOCSIS downstream channel that contains DSG packets after a dsgIfTimerTdsg1 or dsgIfTimerTdsg2 timeout. Default value is 1800 seconds. The value 0 indicates that the client will immediately begin scanning upon dsgIfTimerTdsg1 or dsgIfTimerTdsg2 timeout.
ROW dsgIfTimerRowStatus	1.3.6.1.4.1.4491.2.1.3.1.5.4.1.6	RowStatus	read-create	The status of the row.
dsgIfTunnelDsStats	1.3.6.1.4.1.4491.2.1.3.1.6
dsgIfTunnelDsStatsTable	1.3.6.1.4.1.4491.2.1.3.1.6.1		not-accessible	The IF Tunnel Downstream Stats Table contains the packet and byte counters for the tunnel. It also contains the DSID used by the tunnel traffic.
dsgIfTunnelDsStatsEntry	1.3.6.1.4.1.4491.2.1.3.1.6.1.1		not-accessible	An entry in the DSG IF Tunnel Downstream Stats Table. An entry in this table exists for each dsgIfTunnelIndex and an ifIndex of docsCableDownstream(128).
C64 dsgIfTunnelDsStatsPktsEx	1.3.6.1.4.1.4491.2.1.3.1.6.1.1.1	Counter64	read-only	This attribute indicates the count of the number of packets transmitted in this tunnel
C64 dsgIfTunnelDsStatsOctets	1.3.6.1.4.1.4491.2.1.3.1.6.1.1.2	Counter64	read-only	This attribute indicates the count of the number of octets transmitted in this tunnel
DSI dsgIfTunnelDsStatsDsid	1.3.6.1.4.1.4491.2.1.3.1.6.1.1.3	Dsid	read-only	When operating with Multicast DSID Forwarding (MDF) enabled, this object contains the DSID value with which the CMTS labels the DSG Tunnel traffic. If no DSID has been created for this tunnel then this object returns 0. When MDF is disabled this object returns 0. Pre-3.0 DOCSIS devices are not required to instantiate this object.
dsgIfMIBConformance	1.3.6.1.4.1.4491.2.1.3.2
dsgIfConformance	1.3.6.1.4.1.4491.2.1.3.4
dsgIfGroups	1.3.6.1.4.1.4491.2.1.3.4.1
dsgIfClassifierGroup	1.3.6.1.4.1.4491.2.1.3.4.1.1			A collection of objects providing the classifier configuration.
dsgIfBaseGroup	1.3.6.1.4.1.4491.2.1.3.4.1.2			A collection of objects providing DSG Tunnel and Channel configuration.
dsgIfDCDGroup	1.3.6.1.4.1.4491.2.1.3.4.1.3			A collection of objects providing Timers configuration.
dsgIfDeprecatedGroup	1.3.6.1.4.1.4491.2.1.3.4.1.4			A collection deprecated objects no longer required by this Specification.
dsgIfCompliances	1.3.6.1.4.1.4491.2.1.3.4.2
dsgIfBasicCompliance	1.3.6.1.4.1.4491.2.1.3.4.2.1			The compliance statement for DOCSIS Set-top Gateway systems.

RFC description

DOCSIS Set-top Gateway (DSG) interfaces for out-of-band messaging to cable set-top clients.

Start monitoring cable headend/CMTS equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DSG-IF-MIB