DOCS-CABLE-DEVICE-TRAP-MIB :: docsDevCmInitTLVUnknownTrap

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DOCS-CABLE-DEVICE-TRAP-MIB › docsDevCmInitTLVUnknownTrap

docsDevCmInitTLVUnknownTrap

Module: DOCS-CABLE-DEVICE-TRAP-MIB

OID (symbolic): DOCS-CABLE-DEVICE-TRAP-MIB::docsDevCmInitTLVUnknownTrap

OID (numeric): 1.3.6.1.2.1.69.2.1.2.0.1

Node type: NOTIFICATION-TYPE

Description: Event due to detection of unknown TLV during the TLV parsing process.

The values of docsDevEvLevel, docsDevId, and DocsDevEvText are from the entry which logs this event in the docsDevEventTable. The docsIfDocsisCapability and docsIfDocsisOperMode indicate the DOCSIS version information. The ifPhysAddress value is the MAC address of the cable interface of this cable modem. The docsIfCmCmtsAddress specifies the MAC address of the CMTS to which the CM is connected (if there is a cable card/interface in the CMTS, then it is actually the MAC address of the cable interface which connected to the CM). This part of information is uniformed across all CM traps.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' DOCS-CABLE-DEVICE-TRAP-MIB::docsDevCmInitTLVUnknownTrap
snmptrap -v2c -c public <manager> '' 1.3.6.1.2.1.69.2.1.2.0.1

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:60925->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (131185661) 15 days, 4:24:16.61
  SNMPv2-MIB::snmpTrapOID.0 = OID: DOCS-CABLE-DEVICE-TRAP-MIB::docsDevCmInitTLVUnknownTrap

Start monitoring DOCSIS cable modem/CMTS (Cisco-authored trap extension, vendor-neutral base standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-CABLE-DEVICE-TRAP-MIB::docsDevCmInitTLVUnknownTrap OID value, configure state conditions and alerts, and monitor any DOCSIS cable modem/CMTS (Cisco-authored trap extension, vendor-neutral base standard) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.69docsDevDOCS-CABLE-DEVICE-MIB
1.3.6.1.2.1.69.2docsDevNotificationDOCS-CABLE-DEVICE-MIB
Numeric OIDNameModule
1.3.6.1.2.1.69.2.1docsDevTrapsDOCS-CABLE-DEVICE-TRAP-MIB
1.3.6.1.2.1.69.2.1.2docsDevTrapConformanceDOCS-CABLE-DEVICE-TRAP-MIB
1.3.6.1.2.1.69.2.1.2.0docsDevCmTrapsDOCS-CABLE-DEVICE-TRAP-MIB
1.3.6.1.2.1.69.2.1.2.0.1docsDevCmInitTLVUnknownTrapDOCS-CABLE-DEVICE-TRAP-MIB