DOCS-CABLE-DEVICE-TRAP-MIB :: docsDevCmtsInitRegReqFailTrap

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DOCS-CABLE-DEVICE-TRAP-MIB › docsDevCmtsInitRegReqFailTrap

docsDevCmtsInitRegReqFailTrap

Module: DOCS-CABLE-DEVICE-TRAP-MIB

OID (symbolic): DOCS-CABLE-DEVICE-TRAP-MIB::docsDevCmtsInitRegReqFailTrap

OID (numeric): 1.3.6.1.2.1.69.2.1.3.0.1

Node type: NOTIFICATION-TYPE

Description: An event to report the failure of a registration request from CM happened during the CM initialization process and detected in the CMTS side.

The values of docsDevEvLevel, docsDevId, and DocsDevEvText are from the entry which logs this event in the docsDevEventTable. DocsIfCmtsCmStatusDocsisMode and docsIfCmtsCmStatusMacAddress indicate the docsis version and the MAC address of the requesting CM. docsIfDocsisCapability and ifPhysAddress indicate the docsis version of the CMTS and the MAC address of the CMTS (if there is a cable card/interface in the CMTS, then it is actually the MAC address of the cable interface which connected to the CM) cable card connected to the CM. This part of information is uniformed across all CMTS traps.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' DOCS-CABLE-DEVICE-TRAP-MIB::docsDevCmtsInitRegReqFailTrap
snmptrap -v2c -c public <manager> '' 1.3.6.1.2.1.69.2.1.3.0.1

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:50253->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (132968013) 15 days, 9:21:20.13
  SNMPv2-MIB::snmpTrapOID.0 = OID: DOCS-CABLE-DEVICE-TRAP-MIB::docsDevCmtsInitRegReqFailTrap

Start monitoring DOCSIS cable modem/CMTS (Cisco-authored trap extension, vendor-neutral base standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-CABLE-DEVICE-TRAP-MIB::docsDevCmtsInitRegReqFailTrap OID value, configure state conditions and alerts, and monitor any DOCSIS cable modem/CMTS (Cisco-authored trap extension, vendor-neutral base standard) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.69docsDevDOCS-CABLE-DEVICE-MIB
1.3.6.1.2.1.69.2docsDevNotificationDOCS-CABLE-DEVICE-MIB
Numeric OIDNameModule
1.3.6.1.2.1.69.2.1docsDevTrapsDOCS-CABLE-DEVICE-TRAP-MIB
1.3.6.1.2.1.69.2.1.3.0docsDevCmtsTrapsDOCS-CABLE-DEVICE-TRAP-MIB
1.3.6.1.2.1.69.2.1.3.0.1docsDevCmtsInitRegReqFailTrapDOCS-CABLE-DEVICE-TRAP-MIB