DNOS-CAPTIVE-PORTAL-MIB

All MIBs › DNOS-CAPTIVE-PORTAL-MIB

Organization: Dell, Inc.

Last Updated: 2011-01-26

Category: Vendor: Dell/DNOS

Description: Manages captive portal configuration for guest network authentication on Dell DNOS switching platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DNOS-CAPTIVE-PORTAL-MIB?

This is a Dell Networking OS (DNOS) private MIB for managing captive portal functionality used to authenticate guest users on Dell DNOS-based switching platforms before granting them network access. It is a configuration-oriented module, exposing objects that control captive portal policy - such as enabling/disabling the feature, associating it with specific VLANs or interfaces, and defining redirect/authentication parameters for guest sessions. Its relevance to hardware/software status monitoring is indirect: rather than sensor data, it lets an administrator verify the software-level state of the captive portal service (enabled/disabled, active guest sessions) on the switch, functioning as a service/feature status check rather than a physical health metric. No explicit dependency on other MIBs is indicated in the available text, though captive portal features of this kind typically build on the switch's VLAN and interface configuration objects (IF-MIB, Q-BRIDGE-MIB) to apply guest-network policy. It is typically deployed on Dell DNOS access-layer switches in enterprise or campus networks providing guest WiFi/wired network access with a captive-portal authentication step, with the DNOS-CAPTIVE-PORTAL-MIB MIB providing the SNMP hooks to check that service is enabled and running.

IPNetwork Monitor allows you to monitor SNMP objects defined in DNOS-CAPTIVE-PORTAL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dell DNOS access-layer switch

Monitoring Examples

No specific object or table names are available for this module in the source excerpt, so a concrete polling scenario cannot be grounded in real identifiers. Based on its stated purpose, an administrator would typically poll a captive portal configuration or status object (analogous to a dnosCaptivePortalAdminStatus or a per-interface captive portal enablement table) to confirm the guest authentication feature is active on the intended VLAN/interface. An unexpectedly disabled status where guest access was expected to be portal-gated would indicate a configuration or feature-licensing problem on the switch.

What Can Be Monitored

captive portal enable/disable status
guest session state
portal-to-VLAN/interface association

Imported Objects

From DELL-REF-MIB

dnOS	OBJECT-IDENTITY

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

MacAddress
RowStatus
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using cpCaptivePortalClientBytesReceived OID:

Select a Dell DNOS access-layer switch (captive portal guest authentication) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cpCaptivePortalClientBytesReceived into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of bytes received by this client. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
fastPathCaptivePortal	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38			Private MIB for Captive Portal
cpConfigGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1
cpGlobalConfigGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.1
INT cpAdminMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.1.1	INTEGER	read-write	Enable or disable the captive portal feature on the system.
I32 cpAdditionalHttpPort	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.1.2	Integer32	read-write	The additional captive portal authentication server port for HTTP web connection. The HTTP port default is 0 which denotes no specific port and the default port (80) is used.
I32 cpAdditionalHttpSecurePort	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.1.3	Integer32	read-write	The additional captive portal authentication server secure port for HTTPS web connection. This additional HTTPS port default is 0 which denotes no specific port and the default port (443) is used.
I32 cpPeerStatsReportingInterval	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.1.4	Integer32	read-write	The time interval between statistics reports to the cluster controller. A value of 0 indicates reporting is disabled. The value is represented in seconds.
I32 cpAuthTimeout	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.1.5	Integer32	read-write	The length of time to maintain an authentication session from a client. This time is measured from when a client initiates an authentication request. The value is represented in seconds.
cpCaptivePortalConfigGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.2
cpCaptivePortalTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.2.1		not-accessible	A table of config parms for instances of captive portal.
cpCaptivePortalEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.2.1.1		not-accessible	Captive Portal instance entry.
U32 cpCaptivePortalInstanceId	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.2.1.1.1	Unsigned32	read-only	The identifier associated with this instance of captive portal.
STR cpCaptivePortalConfigName	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.2.1.1.2	DisplayString	read-write	The name, in alpha-numeric characters, assigned to this captive portal configuration.
INT cpCaptivePortalAdminMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.2.1.1.3	INTEGER	read-write	Enable or disable this instance of captive portal on the system.
INT cpCaptivePortalProtocolMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.2.1.1.4	INTEGER	read-write	The protocol mode to be used.
INT cpCaptivePortalVerificationMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.2.1.1.5	INTEGER	read-write	The type of user verification to perform.
U32 cpCaptivePortalUserGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.2.1.1.6	Unsigned32	read-write	The group ID for this captive portal user database.
INT cpCaptivePortalURLRedirectMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.2.1.1.7	INTEGER	read-write	Whether the captive portal should redirect newly authenticated clients to the configured URL. If this mode is disabled, the default locale specific welcome page is used. If enabled, the client is redirected to a configured URL.
STR cpCaptivePortalRedirectURL	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.2.1.1.8	DisplayString	read-write	The URL to which the newly authenticated client is redirected if cpCaptivePortalURLRedirectMode is enabled.
U32 cpCaptivePortalSessionTimeout	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.2.1.1.9	Unsigned32	read-write	The session timeout. After this limit has been reached the user will be disconnected. If this value is set to 0, no timeout is enforced. This value is represented in seconds.
U32 cpCaptivePortalIdleTimeout	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.2.1.1.10	Unsigned32	read-write	The idle timeout of the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no timeout is enforced. This value is represented in seconds.
STR cpCaptivePortalRadiusAuthServer	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.2.1.1.11	DisplayString	read-write	The RADIUS authentication server name assigned to this captive portal configuration. RADIUS server name may only contain alphanumeric plus dash, underline, and space characters.
U32 cpCaptivePortalMaxBandwidthUp	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.2.1.1.12	Unsigned32	read-write	The maximum bandwidth, in bytes per second, that a client can transmit traffic when using Captive Portal. This setting limits the bandwidth at which the client can send data into the network. If this value is set to 0, no rate limiting is enforced. This value is represented in bytes (however; converted & stored as bits/sec).
U32 cpCaptivePortalMaxBandwidthDown	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.2.1.1.13	Unsigned32	read-write	The maximum bandwidth, in bytes per second, that a client can receive traffic when using Captive Portal. This setting limits the bandwidth at which the client can receive data from the network. If this value is set to 0, no rate limiting is enforced. This value is represented in bytes (however; converted & stored as bits/sec).
U32 cpCaptivePortalMaxInputOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.2.1.1.14	Unsigned32	read-write	The maximum input octets (bytes) allowed for the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced. This value is represented in bytes.
U32 cpCaptivePortalMaxOutputOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.2.1.1.15	Unsigned32	read-write	The maximum Output octets (bytes) allowed for the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced. This value is represented in bytes.
U32 cpCaptivePortalMaxTotalOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.2.1.1.16	Unsigned32	read-write	The maximum input/output octets (bytes) allowed for the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced. This value is represented in bytes.
INT cpCaptivePortalUserLogoutMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.2.1.1.17	INTEGER	read-write	Provides the captive portal authenticated user the ability to logout of their session through the use of a logout page. The connection will be terminated as a result of submitting the logout request.
ROW cpCaptivePortalRowStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.2.1.1.18	RowStatus	read-create	The captive portal instance status. Supported values: active(1) - This status is displayed after a valid Captive Portal instance is created. createAndGo(4) - Set to this value to create a new Captive Portal instance. destroy(6) - Set to this value to remove an existing Captive Portal instance.
cpLocalUserDatabaseGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3
cpLocalUserGroupTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.1		not-accessible	A table of group definitions for the local users. This database is used by captive portal instances and local users if the verification mode is set to LOCAL.
cpLocalUserGroupEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.1.1		not-accessible	The user group entry.
I32 cpLocalUserGroupIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.1.1.1	Integer32	not-accessible	The user group entry index.
STR cpLocalUserGroupName	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.1.1.2	DisplayString	read-write	The user group name, limited to alpha-numeric strings (including the '-' and '_' characters).
ROW cpLocalUserGroupRowStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.1.1.3	RowStatus	read-create	The user group entry status. Supported values: active(1) - This status is displayed after a valid user group is created. createAndGo(4) - Set to this value to create a new user group. destroy(6) - Set to this value to remove an existing user group.
cpLocalUserTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.2		not-accessible	A table of user definitions for the local database. This database is used by a captive portal instance if its verification mode is set to LOCAL.
cpLocalUserEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.2.1		not-accessible	The local user entry.
I32 cpLocalUserIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.2.1.1	Integer32	not-accessible	The local user entry index.
STR cpLocalUserName	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.2.1.2	DisplayString	read-write	The user name, limited to alpha-numeric strings (including the '-' and '_' characters).
STR cpLocalUserPassword	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.2.1.3	DisplayString	read-write	The user password. This object will return an empty string even if a password is set.
U32 cpLocalUserSessionTimeout	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.2.1.4	Unsigned32	read-write	The session timeout in seconds. After this limit is reached, the user is disconnected. If this value is set to 0, the default value for the captive portal is used.
U32 cpLocalUserIdleTimeout	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.2.1.5	Unsigned32	read-write	The idle timeout of the session in seconds. After this limit is reached, the user is disconnected. If this value is set to 0, the default value for the captive portal is used.
U32 cpLocalUserMaxBandwidthUp	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.2.1.6	Unsigned32	read-write	The maximum bandwidth, in bytes per second, that the user can transmit traffic when using Captive Portal. This setting limits the bandwidth at which the user can send data into the network. If this value is set to 0, no rate limiting is enforced. This value is represented in bytes (however; converted & stored as bits/sec).
U32 cpLocalUserMaxBandwidthDown	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.2.1.7	Unsigned32	read-write	The maximum bandwidth, in bytes per second, that the user can receive traffic when using Captive Portal. This setting limits the bandwidth at which the user can receive data from the network. If this value is set to 0, no rate limiting is enforced. This value is represented in bytes (however; converted & stored as bits/sec).
U32 cpLocalUserMaxInputOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.2.1.8	Unsigned32	read-write	The maximum input octets (bytes) allowed for the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced. This value is represented in bytes.
U32 cpLocalUserMaxOutputOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.2.1.9	Unsigned32	read-write	The maximum Output octets (bytes) allowed for the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced. This value is represented in bytes.
U32 cpLocalUserMaxTotalOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.2.1.10	Unsigned32	read-write	The maximum input/output octets (bytes) allowed for the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced. This value is represented in bytes.
ROW cpLocalUserRowStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.2.1.11	RowStatus	read-create	The user entry status. Supported values: active(1) - This status is displayed after a valid user is created. createAndGo(4) - Set to this value to create a new user. destroy(6) - Set to this value to remove an existing user.
cpLocalUserGroupAssociationTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.3		not-accessible	The mapping of local user assignments to a user group.
cpLocalUserGroupAssociationEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.3.1		not-accessible	The local user group association entry.
I32 cpLocalUserGroupAssociationUserIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.3.1.1	Integer32	not-accessible	The local user entry index associated with a user group.
I32 cpLocalUserGroupAssociationGroupIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.3.1.2	Integer32	not-accessible	The user group entry index associated with a local user.
ROW cpLocalUserGroupAssociationRowStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.3.3.1.3	RowStatus	read-create	The local user to user group association entry status. Supported values: active(1) - This status is displayed after a valid association between a local user and a user group is created. createAndGo(4) - Set to this value to create a new association between a local user and a user group. destroy(6) - Set to this value to remove an existing association between a local user and a user group.
cpInterfaceAssociationGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.4
cpInterfaceAssociationTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.4.1		not-accessible	The mapping of interface assignments to a captive portal instance.
cpInterfaceAssociationEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.4.1.1		not-accessible	The Captive Portal interface association entry.
U32 cpIntfAssociationCPID	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.4.1.1.1	Unsigned32	not-accessible	The Captive Portal instance identifier associated with an interface.
NUM cpIntfAssociationIfIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.4.1.1.2	InterfaceIndex	not-accessible	The interface ifIndex to which the Captive Portal instance is associated.
ROW cpIntfAssociationRowStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.1.4.1.1.3	RowStatus	read-create	The Captive Portal instance to interface association status. Supported values: active(1) - This status is displayed after a valid association between a Captive Portal instance and an interface is created. createAndGo(4) - Set to this value to create a new association between a Captive Portal instance and an interface. destroy(6) - Set to this value to remove an existing association between a Captive Portal instance and an interface.
cpStatusGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2
cpCaptivePortalGlobalStatusGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.1
INT cpCaptivePortalOperStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.1.1	INTEGER	read-only	Indication of the current operational state of the captive portal feature.
INT cpCaptivePortalOperDisabledReason	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.1.2	INTEGER	read-only	The reason for the captive portal feature being operationally disabled.
IP cpCaptivePortalIpv4Address	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.1.3	IpAddress	read-only	The IP address of this captive portal.
I32 cpCaptivePortalInstanceMaxCount	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.1.4	Integer32	read-only	The maximum number of captive portal instances supported by the system.
I32 cpCaptivePortalInstanceConfiguredCount	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.1.5	Integer32	read-only	The number of captive portal instances currently configured in the system.
I32 cpCaptivePortalInstanceActiveCount	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.1.6	Integer32	read-only	The number of captive portal instances currently active in the system.
I32 cpCaptivePortalAuthenUserMaxCount	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.1.7	Integer32	read-only	The maximum number of authenticated users that the system can support.
I32 cpCaptivePortalLocalUserMaxCount	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.1.8	Integer32	read-only	The maximum number of local users that the system can support.
I32 cpCaptivePortalConfiguredLocalUserCount	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.1.9	Integer32	read-only	The number of local users currently configured in the system.
I32 cpCaptivePortalAuthenUserCurrentCount	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.1.10	Integer32	read-only	The number of currently authenticated users across all captive portal instances.
cpCaptivePortalInstanceStatusGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.2
cpCaptivePortalInstanceStatusTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.2.1		not-accessible	This database is used to report status for a captive portal instance.
cpCaptivePortalInstanceStatusEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.2.1.1		not-accessible	Captive portal instance status entry.
INT cpCaptivePortalInstanceOperStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.2.1.1.1	INTEGER	read-only	Indication of the current operational state of the captive portal instance.
INT cpCaptivePortalInstanceOperDisabledReason	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.2.1.1.2	INTEGER	read-only	The reason the captive portal instance is not currently operational.
INT cpCaptivePortalInstanceBlockStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.2.1.1.3	INTEGER	read-write	Block or unblock the captive portal instance for authentications using the following values: blockPending(0) - Set to this value to block the captive portal instance for authentications. After setting this value, the status displayed is blocked(1). notBlockPending(2) - Set to this value to unblock the captive portal instance for authentications. After setting this value, the status displayed is notBlocked(3).
I32 cpCaptivePortalInstanceAuthUserCount	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.2.1.1.4	Integer32	read-only	The number of currently authenticated users for this captive portal.
cpCaptivePortalIntfStatusGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.3
cpCaptivePortalIntfStatusTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.3.1		not-accessible	This database is used to report status for a captive portal instance interface.
cpCaptivePortalIntfStatusEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.3.1.1		not-accessible	Captive portal instance interface status entry.
NUM cpCaptivePortalIntfIfIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.3.1.1.1	InterfaceIndex	read-only	The ifIndex of the interface associated with this entry.
INT cpCaptivePortalIntfActivationStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.3.1.1.2	INTEGER	read-only	Indication of whether captive portal instance is active on the interface.
INT cpCaptivePortalIntfActivationDisabledReason	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.3.1.1.3	INTEGER	read-only	The reason for the captive portal instance interface not being currently active.
INT cpCaptivePortalIntfBlockStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.3.1.1.4	INTEGER	read-only	Indication of whether the captive portal instance interface is currently blocked for authentications.
I32 cpCaptivePortalIntfAuthUserCount	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.3.1.1.5	Integer32	read-only	The number of currently authenticated users for this captive portal instance interface.
cpCaptivePortalIntfDatabaseGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.4
cpCaptivePortalIntfDatabaseTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.4.1		not-accessible	A table of definitions for interfaces that are captive portal capable. This table identifies services that are provided on this interface.
cpCaptivePortalIntfDatabaseEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.4.1.1		not-accessible
NUM cpCaptivePortalIntfCapabilities	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.4.1.1.1	CpCaptivePortalIntfCapabilitiesMap	read-only	The bitmap value used to identify which capabilities are available on the interface.
cpCaptivePortalClientStatusGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.5
cpCaptivePortalClientStatusTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.5.1		not-accessible	This database is used to report status of authenticated clients.
cpCaptivePortalClientStatusEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.5.1.1		not-accessible	Captive portal client status entry.
MAC cpCaptivePortalClientMacAddress	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.5.1.1.1	MacAddress	read-only	The MAC address of the workstation from which the client is authenticated.
IP cpCaptivePortalClientIpAddress	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.5.1.1.2	IpAddress	read-only	The IP address of the workstation from which the client is authenticated.
STR cpCaptivePortalClientUserName	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.5.1.1.3	DisplayString	read-only	User name (or Guest ID) of the connected client.
INT cpCaptivePortalClientProtocolMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.5.1.1.4	INTEGER	read-only	Protocol mode used for the client authentication.
INT cpCaptivePortalClientVerificationMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.5.1.1.5	INTEGER	read-only	Type of user verification performed for the client authentication.
NUM cpCaptivePortalClientAssocIfIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.5.1.1.6	InterfaceIndex	read-only	The interface on which the client was authenticated.
I32 cpCaptivePortalClientCPID	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.5.1.1.7	Integer32	read-only	The captive portal instance on which the client was authenticated.
TIK cpCaptivePortalClientSessionTime	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.5.1.1.8	TimeTicks	read-only	The time (in seconds) since the client was authenticated.
MAC cpCaptivePortalClientSwitchMacAddress	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.5.1.1.9	MacAddress	read-only	The MAC address of the switch to which the client is authenticated.
IP cpCaptivePortalClientSwitchIpAddress	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.5.1.1.10	IpAddress	read-only	The IP address of the switch to which the client is authenticated.
INT cpCaptivePortalClientSwitchType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.5.1.1.11	INTEGER	read-only	The switch (peer or local) to which the client is authenticated.
INT cpCaptivePortalClientDeauthAction	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.5.1.1.12	INTEGER	read-write	This is an action object. Setting this object to start will initiate the deauthentication of authenticated client. Read on this object will always return none.
cpCaptivePortalClientStatisticsTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.5.2		not-accessible	A table of statistics for each active session.
cpCaptivePortalClientStatisticsEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.5.2.1		not-accessible	Captive portal client statistics entry.
C64 cpCaptivePortalClientBytesReceivedEx	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.5.2.1.1	Counter64	read-only	Number of bytes received by this client.
C64 cpCaptivePortalClientBytesTransmitted	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.5.2.1.2	Counter64	read-only	Number of bytes transmitted by this client.
C64 cpCaptivePortalClientPacketsReceived	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.5.2.1.3	Counter64	read-only	Number of packets received by this client.
C64 cpCaptivePortalClientPacketsTransmitted	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.5.2.1.4	Counter64	read-only	Number of packets transmitted by this client.
cpCaptivePortalIntfClientAssocGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.6
cpCaptivePortalIntfClientAssocTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.6.1		not-accessible	This database is used to report clients associated with a particular captive portal interface.
cpCaptivePortalIntfClientAssocEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.6.1.1		not-accessible	Captive portal interface client status entry.
NUM cpCaptivePortalIntfClientIfIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.6.1.1.1	InterfaceIndex	read-only	The interface on which the client was authenticated.
MAC cpCaptivePortalIntfClientAssocMacAddress	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.6.1.1.2	MacAddress	read-only	The MAC address of the workstation from which the client is authenticated.
ROW cpCaptivePortalIntfClientAssocRowStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.6.1.1.3	RowStatus	read-only	This specifies the row-status of this entry. For a valid entry, the row-status will return active(1). This is the only supported value.
cpCaptivePortalInstanceClientAssocGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.7
cpCaptivePortalInstanceClientAssocTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.7.1		not-accessible	This database is used to report clients associated with a particular captive portal instance.
cpCaptivePortalInstanceClientAssocEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.7.1.1		not-accessible	Captive Portal instance client status entry.
I32 cpCaptivePortalInstanceClientAssocInstanceId	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.7.1.1.1	Integer32	read-only	The instance ID associated with this client.
MAC cpCaptivePortalInstanceClientAssocMacAddress	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.7.1.1.2	MacAddress	read-only	The MAC address of the workstation from which the client is authenticated.
ROW cpCaptivePortalInstanceClientAssocRowStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.2.7.1.1.3	RowStatus	read-only	This specifies the row-status of this entry. For a valid entry, the row-status will return active(1). This is the only supported value.
cpTrapsConfig	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.3
INT cpTrapMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.3.1	INTEGER	read-write	This object enables/disables the global Captive Portal trap mode. If this object is disabled, the Captive Portal Client Authentication Failure traps, Client Connection traps, Client Database Full traps, and Client Disconnection traps are not sent regardless of their setting.
INT cpClientAuthenticationFailureTrapMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.3.2	INTEGER	read-write	Flag to enable/disable client authentication failure SNMP traps.
INT cpClientConnectTrapMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.3.3	INTEGER	read-write	Flag to enable/disable client connection SNMP traps.
INT cpClientDatabaseFullTrapMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.3.4	INTEGER	read-write	Flag to enable/disable client database full SNMP traps.
INT cpClientDisconnectTrapMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.3.5	INTEGER	read-write	Flag to enable/disable client disconnection SNMP traps.
cpTraps	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.4
NTF cpClientAuthenticationFailure	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.4.1			A cpClientAuthenticationFailure trap signifies that the SNMP entity, acting in an agent role, has detected a client authentication failure.
NTF cpClientConnect	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.4.2			A cpClientConnect trap signifies that the SNMP entity, acting in an agent role, has detected a client connection.
NTF cpClientDatabaseFull	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.4.3			A cpClientDatabaseFull trap signifies that the SNMP entity, acting in an agent role, has detected that client authentication database is full.
NTF cpClientDisconnect	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.4.4			A cpClientDisconnect trap signifies that the SNMP entity, acting in an agent role, has detected a client disconnection.
cpCaptivePortalConfigWebGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.5
cpCaptivePortalConfigWebTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.5.1		not-accessible	This database is used to web config.
cpCaptivePortalConfigWebEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.5.1.1		not-accessible	Captive Portal instance client status entry.
U32 cpCaptivePortalConfigWebInstanceId	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.5.1.1.1	Unsigned32	read-only	TThe identifier associated with instance of Captive Portal.
U32 cpCaptivePortalConfigWebWebId	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.5.1.1.2	Unsigned32	read-only	The Web ID associated with this client.

RFC description

Manages captive portal authentication configuration, session tracking, and redirect rules on Dell Networking OS switches.

Start monitoring Dell DNOS access-layer switch (captive portal guest authentication) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DNOS-CAPTIVE-PORTAL-MIB