F10-FPSTATS-MIB

All MIBs › F10-FPSTATS-MIB

Organization: Dell Inc

Last Updated: 2013-02-20

Category: Technology: Traffic Monitoring, Vendor: Dell/DNOS

Description: Dell Force10 MIB for forwarding processor statistics, reporting packet and byte counters for each line card processor.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is F10-FPSTATS-MIB?

F10-FPSTATS-MIB is a Dell Force10 (Dell Networking OS) enterprise MIB that reports forwarding-plane statistics for each line-card forwarding processor (FP/CPU data-plane) in Force10 chassis switches. It belongs to the data-center/core switching technology area and exposes per-stack-unit packet- and buffer-handling counters such as receive counts, drop counts, receive errors, and various memory-buffer allocation failure counters for the forwarding processor's data path. Its monitoring value is in forwarding-plane performance and fault detection: tracking counters like fpDropped, fpRxError, and fpRxDatapathError against fpRecvd reveals whether a line card's forwarding processor is experiencing packet loss, buffer exhaustion (fpNoMhdr, fpNoMBuf, fpNoClus), or datapath errors that would degrade switch throughput. It is a Dell Force10 proprietary extension layered on top of standard interface/forwarding concepts (e.g., IF-MIB) rather than reusing a specific IETF forwarding MIB. Typical deployment context is Dell Force10 (now Dell EMC Networking) data-center core and aggregation switches where per-linecard forwarding statistics are used to isolate performance problems to specific stack units. Engineers can download the F10-FPSTATS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in F10-FPSTATS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dell Force10 chassis switch

Monitoring Examples

An administrator walks fpCpuDataPlaneTable/fpCpuDataPlaneStatsEntry indexed by fpStackUnitIndex to compare fpRecvd against fpDropped and fpRecvToNet for each stack unit's forwarding processor, looking for an unusually high drop ratio. Rising fpNoMhdr, fpNoMBuf, or fpNoClus counts would indicate the forwarding processor is running out of packet buffer resources under load, while nonzero fpRxError or fpRxDatapathError values point to a hardware or datapath fault on that specific stack unit's forwarding processor.

What Can Be Monitored

forwarding processor received packets
dropped packets
receive errors
datapath errors
buffer allocation failures (mhdr/mbuf/cluster)

Imported Objects

From FORCE10-SMI

f10Mgmt

OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE

How to Use in IPNetwork Monitor

Example using fpPartyBusInputPackets OID:

Select a Dell Force10 chassis switch (forwarding-plane/line-card statistics) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type fpPartyBusInputPackets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of input packets. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
f10FpStatsMib	1.3.6.1.4.1.6027.3.16			Dell Networking OS forward plane statistics mib.
f10FpStatsObject	1.3.6.1.4.1.6027.3.16.1
fpStatsObjects	1.3.6.1.4.1.6027.3.16.1.1
fpCpuDataPlaneTable	1.3.6.1.4.1.6027.3.16.1.1.1		not-accessible	The data plane statistics table contains the data plane statistics of a stack unit/line card which includes the received, dropped statistics and per COS transmission and reception statistics . In case of multi CPU platforms, this table contains the data plane statistics for each cpu. The table index will represent the CPUs in order as {CP cpus, RP cpus, LP cpus}.
fpCpuDataPlaneStatsEntry	1.3.6.1.4.1.6027.3.16.1.1.1.1		not-accessible	Data plane statistics
INT fpStackUnitIndex	1.3.6.1.4.1.6027.3.16.1.1.1.1.1	INTEGER	not-accessible	Stack unit number or line card number.
INT fpRxHandle	1.3.6.1.4.1.6027.3.16.1.1.1.1.2	INTEGER	read-only	Reception Handle
INT fpNoMhdr	1.3.6.1.4.1.6027.3.16.1.1.1.1.3	INTEGER	read-only	Number of Message header
INT fpNoMBuf	1.3.6.1.4.1.6027.3.16.1.1.1.1.4	INTEGER	read-only	Number of Message buffer
INT fpNoClus	1.3.6.1.4.1.6027.3.16.1.1.1.1.5	INTEGER	read-only	Number of Clusters.
INT fpRecvd	1.3.6.1.4.1.6027.3.16.1.1.1.1.6	INTEGER	read-only	Received statistics.
INT fpDropped	1.3.6.1.4.1.6027.3.16.1.1.1.1.7	INTEGER	read-only	Dropped statistics.
INT fpRecvToNet	1.3.6.1.4.1.6027.3.16.1.1.1.1.8	INTEGER	read-only	Received to network.
INT fpRxError	1.3.6.1.4.1.6027.3.16.1.1.1.1.9	INTEGER	read-only	Gives statistics about the reception error
INT fpRxDatapathError	1.3.6.1.4.1.6027.3.16.1.1.1.1.10	INTEGER	read-only	Statistics of reception data path error.
INT fpRxPktCOS0	1.3.6.1.4.1.6027.3.16.1.1.1.1.11	INTEGER	read-only	Packets received in COS 0
INT fpRxPktCOS1	1.3.6.1.4.1.6027.3.16.1.1.1.1.12	INTEGER	read-only	Packets received in COS 1
INT fpRxPktCOS2	1.3.6.1.4.1.6027.3.16.1.1.1.1.13	INTEGER	read-only	Packets received in COS 2
INT fpRxPktCOS3	1.3.6.1.4.1.6027.3.16.1.1.1.1.14	INTEGER	read-only	Packets received in COS 3
INT fpRxPktCOS4	1.3.6.1.4.1.6027.3.16.1.1.1.1.15	INTEGER	read-only	Packets received in COS 4
INT fpRxPktCOS5	1.3.6.1.4.1.6027.3.16.1.1.1.1.16	INTEGER	read-only	Packets received in COS 5
INT fpRxPktCOS6	1.3.6.1.4.1.6027.3.16.1.1.1.1.17	INTEGER	read-only	Packets received in COS 6
INT fpRxPktCOS7	1.3.6.1.4.1.6027.3.16.1.1.1.1.18	INTEGER	read-only	Packets received in COS 7
INT fpRxPktUnit0	1.3.6.1.4.1.6027.3.16.1.1.1.1.19	INTEGER	read-only	Packets received in Unit 0
INT fpRxPktUnit1	1.3.6.1.4.1.6027.3.16.1.1.1.1.20	INTEGER	read-only	Packets received in Unit 1
INT fpRxPktUnit2	1.3.6.1.4.1.6027.3.16.1.1.1.1.21	INTEGER	read-only	Packets received in Unit 2
INT fpRxPktUnit3	1.3.6.1.4.1.6027.3.16.1.1.1.1.22	INTEGER	read-only	Packets received in Unit 3
INT fpTransmitted	1.3.6.1.4.1.6027.3.16.1.1.1.1.23	INTEGER	read-only	Transmitted statistics
INT fpTxRequested	1.3.6.1.4.1.6027.3.16.1.1.1.1.24	INTEGER	read-only	Transmission requested.
INT fpNoTxDesc	1.3.6.1.4.1.6027.3.16.1.1.1.1.25	INTEGER	read-only	Transmission descriptor
INT fpTxError	1.3.6.1.4.1.6027.3.16.1.1.1.1.26	INTEGER	read-only	Error in transmitted packets.
INT fpTxReqTooLarge	1.3.6.1.4.1.6027.3.16.1.1.1.1.27	INTEGER	read-only	Transmission requested too large.
INT fpTxInternalError	1.3.6.1.4.1.6027.3.16.1.1.1.1.28	INTEGER	read-only	Internal error in transmitted data.
INT fpTxDatapathErr	1.3.6.1.4.1.6027.3.16.1.1.1.1.29	INTEGER	read-only	Data path error in transmitted data.
INT fpTxPktCOS0	1.3.6.1.4.1.6027.3.16.1.1.1.1.30	INTEGER	read-only	Packets Transmitted from COS Queue 0
INT fpTxPktCOS1	1.3.6.1.4.1.6027.3.16.1.1.1.1.31	INTEGER	read-only	Packets Transmitted from COS Queue 1
INT fpTxPktCOS2	1.3.6.1.4.1.6027.3.16.1.1.1.1.32	INTEGER	read-only	Packets Transmitted from COS Queue 2
INT fpTxPktCOS3	1.3.6.1.4.1.6027.3.16.1.1.1.1.33	INTEGER	read-only	Packets Transmitted from COS Queue 3
INT fpTxPktCOS4	1.3.6.1.4.1.6027.3.16.1.1.1.1.34	INTEGER	read-only	Packets Transmitted from COS Queue 4
INT fpTxPktCOS5	1.3.6.1.4.1.6027.3.16.1.1.1.1.35	INTEGER	read-only	Packets Transmitted from COS Queue 5
INT fpTxPktCOS6	1.3.6.1.4.1.6027.3.16.1.1.1.1.36	INTEGER	read-only	Packets Transmitted from COS Queue 6
INT fpTxPktCOS7	1.3.6.1.4.1.6027.3.16.1.1.1.1.37	INTEGER	read-only	Packets Transmitted from COS Queue 7
INT fpTxPktUnit0	1.3.6.1.4.1.6027.3.16.1.1.1.1.38	INTEGER	read-only	Packets Transmitted from Unit 0
INT fpTxPktUnit1	1.3.6.1.4.1.6027.3.16.1.1.1.1.39	INTEGER	read-only	Packets Transmitted from Unit 1
INT fpTxPktUnit2	1.3.6.1.4.1.6027.3.16.1.1.1.1.40	INTEGER	read-only	Packets Transmitted from Unit 2
INT fpTxPktUnit3	1.3.6.1.4.1.6027.3.16.1.1.1.1.41	INTEGER	read-only	Packets transmitted from Unit3
fpCpuPartyBusTable	1.3.6.1.4.1.6027.3.16.1.1.2		not-accessible	The party bus statistics table contains statistics about the number of input and output packets, bytes, error and the number of input packets dropped in a stack unit/line card.
fpCpuPartyBusStatsEntry	1.3.6.1.4.1.6027.3.16.1.1.2.1		not-accessible	Cpu party bus statistics
C32 fpPartyBusInputPacketsEx	1.3.6.1.4.1.6027.3.16.1.1.2.1.1	Counter32	read-only	Number of input packets.
C32 fpPartyBusInputBytes	1.3.6.1.4.1.6027.3.16.1.1.2.1.2	Counter32	read-only	Number of input bytes.
C32 fpPartyBusInputDropped	1.3.6.1.4.1.6027.3.16.1.1.2.1.3	Counter32	read-only	Number of input packets dropped.
C32 fpPartyBusInputError	1.3.6.1.4.1.6027.3.16.1.1.2.1.4	Counter32	read-only	Error in input packets.
C32 fpPartyBusOutputPackets	1.3.6.1.4.1.6027.3.16.1.1.2.1.5	Counter32	read-only	Number of output packets.
C32 fpPartyBusOutputBytes	1.3.6.1.4.1.6027.3.16.1.1.2.1.6	Counter32	read-only	Number of bytes transmitted.
C32 fpPartyBusOutputError	1.3.6.1.4.1.6027.3.16.1.1.2.1.7	Counter32	read-only	Error in output
fpDropsTable	1.3.6.1.4.1.6027.3.16.1.1.3		not-accessible	The forwarding plane drops table contains the list of various drops per port in a stack unit/line card.
fpDropsEntry	1.3.6.1.4.1.6027.3.16.1.1.3.1		not-accessible	drops
INT fpStackPortIndex	1.3.6.1.4.1.6027.3.16.1.1.3.1.1	INTEGER	not-accessible	Stack/line card port number.
C64 fpIngressDrops	1.3.6.1.4.1.6027.3.16.1.1.3.1.2	Counter64	read-only	Ingress Drops
C64 fpIngIBPCBPFullDrops	1.3.6.1.4.1.6027.3.16.1.1.3.1.3	Counter64	read-only	The number of packets discarded because of Ingress Back Pressure (flow control), or because the Common Buffer Pool is full.
C64 fpIngPortSTPnotFwdDrops	1.3.6.1.4.1.6027.3.16.1.1.3.1.4	Counter64	read-only	Packets dropped due to Spanning Tree State not in forwarding state.
C64 fpIngIPv4L3Discards	1.3.6.1.4.1.6027.3.16.1.1.3.1.5	Counter64	read-only	IPv4 L3 Discards
C64 fpIngPolicyDiscards	1.3.6.1.4.1.6027.3.16.1.1.3.1.6	Counter64	read-only	Packet dropped due to policy discards.
C64 fpIngPacketsDroppedByFP	1.3.6.1.4.1.6027.3.16.1.1.3.1.7	Counter64	read-only	Packets dropped by forwarding plane.
C64 fpIngL2L3Drops	1.3.6.1.4.1.6027.3.16.1.1.3.1.8	Counter64	read-only	L2 L3 packets dropped.
C64 fpIngPortBitMapZeroDrops	1.3.6.1.4.1.6027.3.16.1.1.3.1.9	Counter64	read-only	Port bitmap zero drop condition.
C64 fpIngRxVLANDrops	1.3.6.1.4.1.6027.3.16.1.1.3.1.10	Counter64	read-only	Rx VLAN drop condition.
C64 fpIngressFCSDrops	1.3.6.1.4.1.6027.3.16.1.1.3.1.11	Counter64	read-only	Ingress FCSDrops
C64 fpIngressMTUExceeds	1.3.6.1.4.1.6027.3.16.1.1.3.1.12	Counter64	read-only	Ingress MTUExceeds
C64 fpMMUHOLDrops	1.3.6.1.4.1.6027.3.16.1.1.3.1.13	Counter64	read-only	MMU HOL DROPS
C64 fpMMUTxPurgeCellErr	1.3.6.1.4.1.6027.3.16.1.1.3.1.14	Counter64	read-only	TxPurge CellErr
C64 fpMMUAgedDrops	1.3.6.1.4.1.6027.3.16.1.1.3.1.15	Counter64	read-only	Aged Drops
C64 fpEgressFCSDrops	1.3.6.1.4.1.6027.3.16.1.1.3.1.16	Counter64	read-only	Egress FCS Drops
C64 fpEgIPv4L3UCAgedDrops	1.3.6.1.4.1.6027.3.16.1.1.3.1.17	Counter64	read-only	IPv4 L3UC Aged & Drops
C64 fpEgTTLThresholdDrops	1.3.6.1.4.1.6027.3.16.1.1.3.1.18	Counter64	read-only	TTL Threshold Drops
C64 fpEgInvalidVLANCounterDrops	1.3.6.1.4.1.6027.3.16.1.1.3.1.19	Counter64	read-only	INVALID VLAN CNTR Drops
C64 fpEgL2MCDrops	1.3.6.1.4.1.6027.3.16.1.1.3.1.20	Counter64	read-only	L2MC Drops
C64 fpEgPktDropsOfAnyCondition	1.3.6.1.4.1.6027.3.16.1.1.3.1.21	Counter64	read-only	PKT Drops of ANY Conditions
C64 fpEgHgMacUnderFlow	1.3.6.1.4.1.6027.3.16.1.1.3.1.22	Counter64	read-only	Hg MacUnderflow
C64 fpEgTxErrPktCounter	1.3.6.1.4.1.6027.3.16.1.1.3.1.23	Counter64	read-only	TX Err PKT Counter
fpPacketBufferTable	1.3.6.1.4.1.6027.3.16.1.1.4		not-accessible	The packet buffer table contains the modular packet buffers details per stack unit/line card and the mode of allocation.
fpPacketBufferEntry	1.3.6.1.4.1.6027.3.16.1.1.4.1		not-accessible	Packet buffer details per stack unit/line card.
INT fpPortPipe	1.3.6.1.4.1.6027.3.16.1.1.4.1.1	INTEGER	not-accessible	fpPortPipe denotes the portpipe in the stack unit/line card.
C32 fpTotalPacketBuffer	1.3.6.1.4.1.6027.3.16.1.1.4.1.2	Counter32	read-only	Total packet buffer.
C32 fpCurrentAvailBuffer	1.3.6.1.4.1.6027.3.16.1.1.4.1.3	Counter32	read-only	Current available buffer.
C32 fpPacketBufferAlloc	1.3.6.1.4.1.6027.3.16.1.1.4.1.4	Counter32	read-only	Static or Dynamic allocation.
fpStatsPerPortTable	1.3.6.1.4.1.6027.3.16.1.1.5		not-accessible	The forward plane stats per port table contains the packet buffer usage per port per stack unit/line card.
fpStatsPerPortEntry	1.3.6.1.4.1.6027.3.16.1.1.5.1		not-accessible	Per port stats and per COS stats.
C32 fpCurrentUsagePerPort	1.3.6.1.4.1.6027.3.16.1.1.5.1.1	Counter32	read-only	Current usage per port.
C32 fpDefaultPacketBuffAlloc	1.3.6.1.4.1.6027.3.16.1.1.5.1.2	Counter32	read-only	Default packet buffer allocated.
C32 fpMaxLimitPerPort	1.3.6.1.4.1.6027.3.16.1.1.5.1.3	Counter32	read-only	MAx limit per port.
fpStatsPerCOSTable	1.3.6.1.4.1.6027.3.16.1.1.6		not-accessible	The forwarding plane statistics per COS table gives packet buffer statistics per COS per port.
fpStatsPerCOSEntry	1.3.6.1.4.1.6027.3.16.1.1.6.1		not-accessible	Per port stats and per COS stats.
INT fpPerPortCOSNumber	1.3.6.1.4.1.6027.3.16.1.1.6.1.1	INTEGER	not-accessible	COS queue number
C32 fpCurrentUsagePerCOS	1.3.6.1.4.1.6027.3.16.1.1.6.1.2	Counter32	read-only	Current usage per COS per port.
C32 fpDefaultPacketBuffAllocPerCOS	1.3.6.1.4.1.6027.3.16.1.1.6.1.3	Counter32	read-only	Default packet buffer allocated per COS.
C32 fpMaxLimitPerCOS	1.3.6.1.4.1.6027.3.16.1.1.6.1.4	Counter32	read-only	Max limit per port.
C64 fpHOLDropsPerCOS	1.3.6.1.4.1.6027.3.16.1.1.6.1.5	Counter64	read-only	HOL Drops Per Queue.
fpCpuDataPlaneCOSTable	1.3.6.1.4.1.6027.3.16.1.1.7		not-accessible	The CPU data plane COS table contains the per COS transmission and reception statistics of CPU dataplane.
fpCpuDataPlaneCOSEntry	1.3.6.1.4.1.6027.3.16.1.1.7.1		not-accessible	CPU Data plane per COS statistics
I32 fpCOSIndex	1.3.6.1.4.1.6027.3.16.1.1.7.1.1	Integer32	not-accessible	CPU dataplane COS queue number.
C32 fpRxPktCOS	1.3.6.1.4.1.6027.3.16.1.1.7.1.2	Counter32	read-only	Receive COS queue statistics in CPU dataplane.
C32 fpTxPktCOS	1.3.6.1.4.1.6027.3.16.1.1.7.1.3	Counter32	read-only	Transmit COS queue statistics in CPU dataplane.
fpEgrQBuffSnapshotTable	1.3.6.1.4.1.6027.3.16.1.1.8		not-accessible	Table to Show Egress queue level snapshot statistics. There are total of 21 queues out of which 12[1..12] are unicast queues and the remaining 9[13..21] are multicast queues.
fpEgrQBuffSnapshotEntry	1.3.6.1.4.1.6027.3.16.1.1.8.1		not-accessible	Egress queue snapshot info.
C32 fpEgrQTotBuffCells	1.3.6.1.4.1.6027.3.16.1.1.8.1.1	Counter32	read-only	Total Cell count per Egress queue.
fpIngPgBuffSnapshotTable	1.3.6.1.4.1.6027.3.16.1.1.9		not-accessible	Table to Show Ingress priority-group level snapshot statistics for all priority-groups[1..8].
fpIngPgBuffSnapshotEntry	1.3.6.1.4.1.6027.3.16.1.1.9.1		not-accessible	Priority group snapshot info.
INT fpPerPortPGIndex	1.3.6.1.4.1.6027.3.16.1.1.9.1.1	INTEGER	not-accessible	Priority-Group number.
C32 fpIngSharedCells	1.3.6.1.4.1.6027.3.16.1.1.9.1.2	Counter32	read-only	Shared cell count per priority group.
C32 fpIngHeadroomCells	1.3.6.1.4.1.6027.3.16.1.1.9.1.3	Counter32	read-only	Headroom cell count per priority group.
fpStatsPerPgTable	1.3.6.1.4.1.6027.3.16.1.1.10		not-accessible	The forwarding plane statistics per PG table gives packet buffer allocated and used count per PG per port.
fpStatsPerPgEntry	1.3.6.1.4.1.6027.3.16.1.1.10.1		not-accessible	Buffer statistics per PG per port.
INT fpStatsPgLimitMinCells	1.3.6.1.4.1.6027.3.16.1.1.10.1.1	INTEGER	read-only	Min cells allocated per Priority Group.
INT fpStatsPgSharedCells	1.3.6.1.4.1.6027.3.16.1.1.10.1.2	INTEGER	read-only	Shared cells allocated per Priority Group.
INT fpStatsPgSharedMode	1.3.6.1.4.1.6027.3.16.1.1.10.1.3	INTEGER	read-only	Priority group shared mode[static/dynamic].
INT fpStatsPgHdrmCells	1.3.6.1.4.1.6027.3.16.1.1.10.1.4	INTEGER	read-only	Headroom cells allocated per Priority group.
C32 fpStatsPgCounterMinCells	1.3.6.1.4.1.6027.3.16.1.1.10.1.5	Counter32	read-only	Priority Group Min cell count.
C32 fpStatsPgCounterSharedCells	1.3.6.1.4.1.6027.3.16.1.1.10.1.6	Counter32	read-only	Priority Group Shared cell count.
C32 fpStatsPgCounterHdrmCells	1.3.6.1.4.1.6027.3.16.1.1.10.1.7	Counter32	read-only	Priority group Headroom cell count.
pfcPerPrioTable	1.3.6.1.4.1.6027.3.16.1.1.11		not-accessible	This table is used to fetch the number of tx and rx PFC frame counts per port per priority.
pfcPerPrioEntry	1.3.6.1.4.1.6027.3.16.1.1.11.1		not-accessible	Rx and Tx PFC frame counter info.
INT prioIndex	1.3.6.1.4.1.6027.3.16.1.1.11.1.1	INTEGER	not-accessible	Priority Index.
C64 pfcPerPrioRequests	1.3.6.1.4.1.6027.3.16.1.1.11.1.2	Counter64	read-only	PFC tx counters.
C64 pfcPerPrioIndications	1.3.6.1.4.1.6027.3.16.1.1.11.1.3	Counter64	read-only	PFC rx counters.
fpCpuPartyBusPortStatsTable	1.3.6.1.4.1.6027.3.16.1.1.12		not-accessible	The party bus port statistics table contains statistics about the number of input and output packets, bytes, error and the number of input packets dropped in a party bus port. This table is applicable to platforms which support party bus statistics at per port level.
fpCpuPartyBusPortStatsEntry	1.3.6.1.4.1.6027.3.16.1.1.12.1		not-accessible	Cpu party bus statistics
C64 fpCpuPartyBusPortStatsOutOctets	1.3.6.1.4.1.6027.3.16.1.1.12.1.1	Counter64	read-only	Number of output octets.
C32 fpCpuPartyBusPortStatsOutDropPkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.2	Counter32	read-only	Number of output packets dropped.
C32 fpCpuPartyBusPortStatsOutCOS0Pkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.3	Counter32	read-only	Number of output packets in COS queue 0.
C32 fpCpuPartyBusPortStatsOutCOS1Pkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.4	Counter32	read-only	Number of output packets in COS queue 1.
C32 fpCpuPartyBusPortStatsOutCOS2Pkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.5	Counter32	read-only	Number of output packets in COS queue 2.
C32 fpCpuPartyBusPortStatsOutCOS3Pkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.6	Counter32	read-only	Number of output packets in COS queue 3.
C32 fpCpuPartyBusPortStatsOutCOS4Pkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.7	Counter32	read-only	Number of output packets in COS queue 4.
C32 fpCpuPartyBusPortStatsOutCOS5Pkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.8	Counter32	read-only	Number of output packets in COS queue 5.
C32 fpCpuPartyBusPortStatsOutUnicastPkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.9	Counter32	read-only	Number of unicast output packets.
C32 fpCpuPartyBusPortStatsOutMulticastPkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.10	Counter32	read-only	Number of multicast output packets.
C32 fpCpuPartyBusPortStatsOutBroadcastPkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.11	Counter32	read-only	Number of broadcast output packets.
C32 fpCpuPartyBusPortStatsOutPausePkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.12	Counter32	read-only	Number of output pause packets.
C32 fpCpuPartyBusPortStatsOutCollisions	1.3.6.1.4.1.6027.3.16.1.1.12.1.13	Counter32	read-only	Number of output collisions.
C32 fpCpuPartyBusPortStatsOutSingleCollisions	1.3.6.1.4.1.6027.3.16.1.1.12.1.14	Counter32	read-only	Number of single output collisions.
C32 fpCpuPartyBusPortStatsOutMultiCollisions	1.3.6.1.4.1.6027.3.16.1.1.12.1.15	Counter32	read-only	Number of multiple output collisions.
C32 fpCpuPartyBusPortStatsOutLateCollisions	1.3.6.1.4.1.6027.3.16.1.1.12.1.16	Counter32	read-only	Number of late output collisions.
C32 fpCpuPartyBusPortStatsOutExcessCollisions	1.3.6.1.4.1.6027.3.16.1.1.12.1.17	Counter32	read-only	Number of excess output collisions.
C32 fpCpuPartyBusPortStatsOutDeferred	1.3.6.1.4.1.6027.3.16.1.1.12.1.18	Counter32	read-only	Number of output packets deferred.
C32 fpCpuPartyBusPortStatsOutDiscarded	1.3.6.1.4.1.6027.3.16.1.1.12.1.19	Counter32	read-only	Number of output packets discarded.
C64 fpCpuPartyBusPortStatsInOctets	1.3.6.1.4.1.6027.3.16.1.1.12.1.20	Counter64	read-only	Number of input octets.
C32 fpCpuPartyBusPortStatsInUndersizePkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.21	Counter32	read-only	Number of undersize input packets.
C32 fpCpuPartyBusPortStatsInOversizePkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.22	Counter32	read-only	Number of oversize input packets.
C32 fpCpuPartyBusPortStatsInPausePkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.23	Counter32	read-only	Number of input pause packets.
C32 fpCpuPartyBusPortStatsIn64OctetPkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.24	Counter32	read-only	Number of input packets of size 64 octets.
C32 fpCpuPartyBusPortStatsIn65To127OctetPkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.25	Counter32	read-only	Number of input packets of size 65 to 127 octets.
C32 fpCpuPartyBusPortStatsIn128To255OctetPkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.26	Counter32	read-only	Number of input packets of size 128 to 255 octets.
C32 fpCpuPartyBusPortStatsIn256To511OctetPkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.27	Counter32	read-only	Number of input packets of size 256 to 511 octets.
C32 fpCpuPartyBusPortStatsIn512To1023OctetPkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.28	Counter32	read-only	Number of input packets of size 512 to 1023 octets.
C32 fpCpuPartyBusPortStatsIn1024ToMaxOctetPkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.29	Counter32	read-only	Number of input packets of size more than 1024 octets.
C32 fpCpuPartyBusPortStatsInJabbers	1.3.6.1.4.1.6027.3.16.1.1.12.1.30	Counter32	read-only	Number of input jabbers.
C32 fpCpuPartyBusPortStatsInAlignErrors	1.3.6.1.4.1.6027.3.16.1.1.12.1.31	Counter32	read-only	Number of input align errors.
C32 fpCpuPartyBusPortStatsInFcsErrors	1.3.6.1.4.1.6027.3.16.1.1.12.1.32	Counter32	read-only	Number of input FCS errors.
C32 fpCpuPartyBusPortStatsInGoodOctets	1.3.6.1.4.1.6027.3.16.1.1.12.1.33	Counter32	read-only	Number of good input octets.
C32 fpCpuPartyBusPortStatsInDropPkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.34	Counter32	read-only	Number of input packets dropped.
C32 fpCpuPartyBusPortStatsInUnicastPkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.35	Counter32	read-only	Number of unicast input packets.
C32 fpCpuPartyBusPortStatsInMulticastPkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.36	Counter32	read-only	Number of multicast input packets.
C32 fpCpuPartyBusPortStatsInBroadcastPkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.37	Counter32	read-only	Number of broadcast input packets.
C32 fpCpuPartyBusPortStatsInSrcAddrChanges	1.3.6.1.4.1.6027.3.16.1.1.12.1.38	Counter32	read-only	Number of input source address changes.
C32 fpCpuPartyBusPortStatsInFragments	1.3.6.1.4.1.6027.3.16.1.1.12.1.39	Counter32	read-only	Number of input fragments.
C32 fpCpuPartyBusPortStatsInJumboPkts	1.3.6.1.4.1.6027.3.16.1.1.12.1.40	Counter32	read-only	Number of jumbo input packets.
C32 fpCpuPartyBusPortStatsInSymbolErrors	1.3.6.1.4.1.6027.3.16.1.1.12.1.41	Counter32	read-only	Number of input symbol error.
C32 fpCpuPartyBusPortStatsInInRangeErrors	1.3.6.1.4.1.6027.3.16.1.1.12.1.42	Counter32	read-only	Number of input in-range errors.
C32 fpCpuPartyBusPortStatsInOutRangeErrors	1.3.6.1.4.1.6027.3.16.1.1.12.1.43	Counter32	read-only	Number of input out-of-range errors.

RFC description

Dell Networking forward plane statistics including data plane, CPU, and COS queue metrics.

Start monitoring Dell Force10 chassis switch (forwarding-plane/line-card statistics) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download F10-FPSTATS-MIB