All MIBs › DKSF-50-8-1-A-X › npThermoHigh
npThermoHigh
Module: DKSF-50-8-1-A-X
OID (symbolic): DKSF-50-8-1-A-X::npThermoHigh
OID (numeric): 1.3.6.1.4.1.25728.8800.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Top margin of normal temperature range, deg.C
What is npThermoHigh?
The configured upper bound (in degrees Celsius) of the normal temperature range for this sensor; npThermoStatus flips to high(3) once npThermoValue rises above it, so an admin uses this to know at what point an overheat alarm will fire.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8800.1.1.5 snmpwalk -v2c -c public <target> DKSF-50-8-1-A-X::npThermoHigh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8800.1.1.5.1 snmpget -v2c -c public <target> DKSF-50-8-1-A-X::npThermoHigh.1
Start monitoring NetPing DKSF-50 IP-based remote power/relay and sensor controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-50-8-1-A-X::npThermoHigh OID value, configure state conditions and alerts, and monitor any NetPing DKSF-50 IP-based remote power/relay and sensor controller from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8800 | npThermo | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8800.1 | npThermoTable | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8800.1.1 | npThermoEntry | DKSF-201-9-X-X-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8800.1.1.5 | npThermoHigh | DKSF-50-8-1-A-X |